Wicks Update

Brent Johnson is an organ technician and web designer for the Wicks Organ Company.

In January 2005, Wicks Opus 4497 left Highland, Illinois for the second time. The organ was designed and built in 1965 for Sacred Heart Cathedral in Rochester, New York, and originally represented a bold, new step in design and tonal philosophy for the company. With the direction and assistance of the company's young new tonal director from Minnesota, the Wicks Organ Company stepped ahead of other builders in rediscovering classic organ building styles. The organist Frank Pilecki, Frank Morris, and church staff member Father Edward Zimmer desired an organ of classical design for the live acoustics of the cathedral. In 1964, it would have been natural to hesitate when considering Wicks for such a project. In fact, "the selection of Wicks surprised some fellow organists of the city to whom the Wicks name suggested small organs, theatre organs and those for lighter uses."1 However, after visiting the Wicks shop and hearing some of the work of John E. Sperling, the church signed a contract for a new 54-rank neo-Baroque pipe organ, making it the first cathedral instrument in that style designed by the company.

The start of a career

At the age of 18, John Sperling wrote to the Wicks Organ Company looking to further his training in organ building. Unfortunately, with a national draft in progress, the company was apprehensive about beginning the training of a young man of military service age. His initial request for a job was turned down. Several years later, with two years of army service behind him, married with his first child, and with an even greater sense of determination, John again wrote to Wicks asking if he could begin as a voicer and tonal finisher. This time they accepted and John began work in 1957.

The son of a piano tuner, John was known as a fine musician with a good ear before he began working with organs. Ernest Vogelpohl, a local organ man in his home of New Ulm, wrote to Martin Wick, president of the Wicks Organ Company, that John was already a good voicer and musician and recommended Wicks hire him to continue his training. A Wicks organ had been installed in the Sperling family church, and of course John spoke highly of it to the Wick family; however, he already knew what needed to be changed to make the organ more suitable for accompanying worship services there. The heavily musical Lutheran church required an organ designed for leading voices, with definition of line and great clarity in every stop. Organ literature was very important to the service, and an organ capable of the performance of many styles was required.

The Wicks style

The Rochester Cathedral organ was not Wicks' first attempt at an all-classical organ. There were many instruments prior to Opus 4497 that bore John's signature tonal design. The Wicks studio organ represented the first large instrument in the new style with 59 ranks, installed in 1964 around a large room in the newly built Wicks offices. On the edge of town in Highland, Illinois, the new, modern Evangelical United Church of Christ building was home to a 28-rank instrument. The acoustically rich environment of this new church improved upon the success of this instrument. The committee from Rochester, which included communications engineer Frank Morris, owner of a small classically voiced Wicks organ, found the studio organ to be too "romantic." The committee was greatly impressed, however, by the design and sound of the United Church of Christ instrument. This organ convinced them that this old company known for small cabinet organs and English-style instruments could build for them the cutting-edge instrument they desired. In addition, the church got a satisfactory preview of the Wicks sound when Mr. Morris loaned the church his home organ for services until the new Wicks was installed. The 4-manual Rochester organ featured open-toe voicing on the majority of the ranks, and bright, narrow-scaled reeds. The Great was on two inches wind pressure, the enclosed Swell and Choir divisions on 21⁄4 inches, and the exposed Positiv division on 13⁄4 inches.

In the years following, John Sperling was responsible for design, voicing and tonal finishing on the instruments that came to define the tonal style of the Wicks Organ Company throughout the 1960s and 1970s. The Wicks Organ Company was well-known for the heavily romantic instruments that allowed the company to thrive in the 1930s and 1940s, but times were changing, and the company was preparing to adapt its techniques and processes to continue to satisfy congregations. Credit must be given to former Wicks president Martin Wick for allowing these new techniques, ideas, and new kinds of organs to take the place of the old,  and for allowing John to move the company ahead in new directions. Organists and academics throughout the country were rediscovering early music and working towards historical practices. Organists desired instruments much like the ones European builders were creating. In addition, electronic organs were becoming more plentiful and a greater source of competition.

John, not in response to outside pressure but guided by his own experience and knowledge, struck out on his own, ahead of the curve, and quickly made the Wicks Organ Company a leader in the development of neo-Baroque, north German Baroque, or classical style organs. During the 1960s many changes occurred at the Wicks Organ Company. Wind pressures of new organs began to drop to 2 inches, 11⁄2 inches, 1 inch, or even lower in some cases. Wicks engineers developed new regulators for these lower pressures. The advent of solid-state switching systems and combination actions changed much of the design and building process. Pipe voicers had to learn new techniques as pipe construction changed from closed toe to open. Console builders and designers were required to work with new designs to help keep pipe organs affordable and modern, and to ensure every church the opportunity to have a pipe organ. The changes were successful as Wicks maintained an average schedule of 100 pipe organs per year throughout the 1960s and 1970s.

There was a snowstorm on the night of January 17, 1965, when a caped Virgil Fox marched from the sanctuary to the gallery to perform the dedicatory recital at Sacred Heart Cathedral. Two nights of music were required, one for members of the parish and another for the public, and both were packed. The parishioners had already been excited by the sounds of Frank Morris's small residence organ, and this new large instrument held even more potential. Both were quite exciting departures from the 1901 Kimball this organ replaced. The instrument received much publicity through articles in the local paper and write-ups in several journals, including appearing on the cover of The Diapason. Recitalists such as André Marchal, William Ferris, Flor Peeters and Alec Wyton performed on the Wicks at Sacred Heart Cathedral.

Continuing development

As the American Classic style of organs developed into the 1980s and 1990s, John adapted the company's style to not only provide what customers wanted, but to anticipate their wishes. John understood the bright upperwork, clear principals, and low pressures of the North German style and how to use them, but that was not the extent of his knowledge. During his tenure as tonal director, John was responsible for the design and finishing of French Classical, Spanish, English, German Romantic, even theatre organs. John has overseen and been involved in the design and construction of more than three thousand pipe organs. It is impossible to look at the history of the Wicks Organ Company without noticing his presence.

Forty-eight years later, John's loyalty and devotion to the company and to the Wick family is unmatched. One is challenged to find an employee as hard-working and pleasant as John after so many years. His family has been part of Wicks. His brother Robert worked as a voicer, and his son David worked part-time in the pipe shop. It is fair to point out that some would call John stubborn, as those who have attempted to challenge John on a point have found out. In fact, Ernest Vogelpohl, the organ man from New Ulm, used that exact word when describing the 18-year-old John in a letter to Martin Wick. Determined organists have used such a description when a tonal finishing was in progress; however, one cannot imagine John accomplishing what he has in his lifetime without a degree of stubbornness. More polite adjectives would be confident, sure, and unyielding. Stepping into a company that has been doing things "like we always have" at the age of 25 and in the end completely changing methods, designs, styles, and directions would require the character and confidence John possesses.

Pricing agent and former shop superintendent Jim Schmidt points out that "there's never a gray area with John, only right and wrong answers, and 99.9% of the time, he'll be right." Retired chief designer Alan Draper refers to John as "always pleasant to work with." Alan especially appreciated that John sought out the opinions and knowledge of the design department before ever developing an organ specification for a church.

As times have changed, John has adapted with them, always maintaining his pleasant demeanor and even temper. Never being angry and never letting emotions cloud decisions, John always sees the most logical and sensible solution to any problem that arises, even when others can't.

Sales director Bob Capra refers to John as not only a friend, but as a "good example of a Christian man." By sticking to ideals, focusing on the job at hand, and putting on his coat and going home to his family promptly at 5 o'clock, John has left an indelible mark not only on this company and his coworkers, but also on the history of American organ building.

In October 2003, Mary, Mother of Hope Church in New Castle, Pennsylvania purchased Opus 4497 through The Organ Clearing House. The organ came back to Highland where it received new solid-state relays, combination action, swell motors, and new blowers. The organ was cleaned, and some minor voicing alterations were made, but the organ is largely installed as originally designed. The excellent acoustics of Mary, Mother of Hope Church help the organ fill the room, possibly better than it did in Rochester. All of the work was overseen by John Sperling. In October 2000, William Hamner was appointed tonal director of Wicks Organ Company and John became tonal director emeritus, where he continues to assist our customers, salesmen, and employees.      n

Eric Herz, distinguished Boston harpsichord maker, died on May 25 in Barton, Vermont, after having suffered from Alzheimer's disease for many years. Born in Cologne, Germany, in 1919, Herz emigrated to Palestine in 1939, eventually joining the Israel Philharmonic Orchestra as a player of flute and piccolo. He moved to Canada in 1951, and to Boston in 1953, where he joined the Hubbard and Dowd harpsichord shop before opening his own workshop in 1954. By the time of his retirement in 1996, Herz had produced nearly 500 instruments.

Paul Francis Lehnerer, 50, of Altamonte Springs, Florida, died on June 2 of an apparent heart attack. From 1992 until his death, Lehnerer was music and liturgy director at St. Mary Magdalen Roman Catholic Church in Altamonte Springs, where he directed a 60-voice choir and served as principal organist. Born in Calumet City, Illinois, Mr. Lehnerer attended the Chicago Musical College of Roosevelt University from 1970-74. He completed further study at the Seminary of the Immaculate Conception in Huntington, New York, where in 1992 he received his master of arts degree in theology. Lehnerer was a member of the Central Florida AGO chapter. He is survived by his mother, five brothers, and two sisters.

Martin M. Wick, 82 years old, died on June 15, while working at his home in Highland, Illinois. Mr. Wick served as president of the Wicks Organ Company, a position he held for over 60 years. Son of Wicks Organ Company founder John Wick, Martin grew up building pipe organs, working alongside his father and his older brother John Henry Wick in developing innovations in organ design and Direct-Electric® action. He learned the art of pipe voicing from Henry Vincent Willis, Jake Schaefer, and from his brother John Henry. He graduated from St. Louis University in St. Louis, Missouri. At the age of 22, Martin was called to run the family business after the early death of his older brother. He is credited with leading the company through some of its toughest times. During World War II, Martin kept the shop open by retooling to manufacture clock and airplane parts, and building new organs out of only existing materials. Following the war, Wicks was the first American company to return to organ building after Martin successfully petitioned the government. Through perseverance and personal sacrifice, Martin Wick kept the company afloat through hard economic times that meant the demise of other organbuilding firms. Mr. Wick was a talented organist and, although organ building was his first love, enjoyed many other passions, including flying and airplane building, sailing, collecting antique cars, being outdoors, being with his children and many grandchildren, and working around his home. He is survived by his wife Barbara, daughters Sharon L. Malloy, Patricia G. (Dennis) Riker, Kim Capelle, Mary Haberer, and Melinda Wick, sons Scott Wick and Mark Wick, and 17 grandchildren. Martin took great pride in the Wicks Organ Company, and after 60 years still took time to walk through the shop and inspect every detail of every instrument, and to talk with his many employees. His last day at work was spent doing exactly this. Martin Wick died the way he lived, working hard at something he loved with his family near him.

--Brent Johnson

R. E. Coleberd is a contributing editor to The Diapason.

Introduction

Pipe organ building in America today, as portrayed in the music media, is described exclusively as the crafting of new instruments, some with mechanical action and nearly all with carved or gilded cases. This is understandable given the news value of new instruments, but it is nonetheless unfortunate because it ignores a vital segment of organbuilding today: the restoration, rebuilding, refurbishing, updating, and modernizing of existing instruments as well as the building of new instruments from recycled and new material. This activity is primarily the work of individuals and small firms, unsung heroes in the spectrum of organbuilding today. Their work is especially important for two reasons: it speaks to the ongoing primacy of the King of Instruments as the time-honored musical medium in a house of worship, and the determination of congregations, recognizing this fact, to preserve and promote the pipe organ for present and future generations.
In 1966 the author published, in these pages, “The Place of the Small Builder in the American Organ Industry.” His comment that the independent builder “may well assume increasing importance in the future of the pipe organ and the organ industry”1 was perhaps prophetic of the situation today. In many ways this narrative is a continuation and update of that article. Forty years ago the pipe organ industry was dominated by the major builders, whose work accounted for 80% of the new instruments in a market where the discarding and replacement of older instruments was a major portion of the work. Today the situation is vastly different. The market is now only a shadow of its former self. Several major builders have folded, unable to continue under greatly diminished factory production; buyers have welcomed the electronic instrument amid drastically diminished mainline church membership and budgets; and the academic market, with certain notable exceptions, is gone because colleges and universities are market-driven and direct capital resources to enrollment demand.
Yet, organbuilding continues, and pipe organs will always be built in this country and the world over. An important segment of this effort, now demanding recognition, is the work of talented individuals, working alone and in collaboration with other artisans, to craft instruments of singular artistic merit in accordance with public recognition today that a pipe organ is a work of art and the work of an artist. In a statement in 1966 prophetic of the situation today, Robert J. Reich, founder and now retired president of the Andover Organ Company, an early participant in the tracker organ revival in America, stated his philosophy of organbuilding as “the craftsman’s approach to construction and the musician’s approach to tone.”2 Musical interest and skill begin early and often with other instruments, while craftsmanship is acquired through formal and informal training.
This article describes the career of D. Steuart Goodwin: the experiences and individuals who shaped his philosophy of organbuilding, details of several instruments in his opus list, and his contemporary voicing and tonal finishing assignments. Steuart has won the admiration and respect of organ committees, organists, and builders as evidenced by his assignments across the country. Jack Bethards, president of Schoenstein Organbuilders, calls Goodwin a genius:

There is no other way to explain his brilliance in so many fields. Steuart combines the well-honed skill of a master craftsman with the cultivated taste and sensitivity of a fine artist. He has a real gift for design both visual and tonal. He is a musician through and through. His touch with pipes is magical. With ease and efficiency, he can bring the best musical quality out of just about any set of pipes.3

Said Manuel Rosales of Rosales Organbuilders:

My friend and colleague Steuart Goodwin is a rare individual, whose organ building talents combine great skill, good taste, and economy of resources. He is equally at home with visual design, tonal finishing, and hands-on organbuilding. His love of the craft is exemplified by the warm and inviting sounds of his new instruments and many revoicing projects. He and his work continue to be a source of personal and professional inspiration for me, his coworkers, and his clients.4

Early life and education

Donald Steuart Goodwin, Jr. was born on April 9, 1942 in Riverside, California, the son of a building contractor who sang in college musical productions, and a sometime public school teacher and housewife who taught piano privately.5 His grandfather, Phillip Goodwin, taught violin in Redlands, California, and played in a string quartet. Steuart’s folks met at the University of Redlands, a Baptist liberal arts college long known for its fine musical program. Arthur Poister taught organ there in the 1920s when a celebrated four-manual, 54-rank Casavant organ, recently restored and updated, was installed in Memorial Chapel. The organ program at Redlands is primarily associated with Leslie Spelman (1903–2000), a nationally known teacher and pedagogue who joined the faculty in 1937.6
Steuart’s musical interests began early; his 96-year-old mother recalls that he could carry a tune at the age of two. He began cornet lessons in the fourth grade and enrolled in the band at Lincoln School in Riverside. He recalls as a youngster asking his mother about the Estey pipe organ in the family’s Methodist church, but what really turned him on was when, at the age of fourteen, he and his father saw Disney’s 20,000 Leagues under the Sea and heard Captain Nemo play Bach’s Toccata and Fugue in D minor. “I went home and played my older sister Jane’s recording over and over, checked out books at the library on organbuilding, and from that time on I was permanently ‘hooked’,” he says.7
Eager to study organ, Steuart approached Roberta Bitgood, organist at Calvary Presbyterian Church in Riverside, who had studied organ with Clarence Dickinson and who was later national president of the AGO. She suggested he begin with a year of piano instruction, which he did, before studying with her for two years, in the 11th and 12th grades.8 While in high school, his future organbuilding career began when he installed a three-rank Robert Morton theatre organ in his family’s garage. His theatre organ interest continued and became part of his work.
In 1959 he matriculated in the music program at the University of Redlands, majoring in composition under Wayne Bohrnstedt, having already written two chorale preludes for organ and a sonata for woodwind quintet. He sang in the University Choir his freshman year and played in the concert band all four years. In 1961, his sophomore year, he won the $800 first prize in the Forest Lawn Foundation Writing Awards Contest with an essay entitled, “The Organ Builder Finds His Place.”9 During Goodwin’s junior year, the band director persuaded three trumpeters to switch to French horn, which was a wise move for Steuart as he went on to play horn for 13 seasons in the University-Community Symphony—until it was converted to all union professionals.10 In recent years he has played French horn in a woodwind quintet and in the Redlands Fourth of July Band.
Goodwin studied organ at Redlands with Raymond Boese (1924–1988), who came to Redlands in 1961 to join his former teacher and now colleague Leslie Spelman in the music department.11 By his junior year, Steuart had become dissatisfied with the Wicks, Harry Hall (New Haven), and Robert Morton practice organs on campus, all dated and woefully inadequate for modern pedagogy and performance. He convinced the school that they needed a tracker instrument, having been listening avidly to recordings by E. Power Biggs playing and narrating tracker organs in Europe. Scouring classified ads in The Diapason, he found an 1870s George Stevens (Cambridge) instrument for sale by Nelson Barden.12 After months of negotiating with school officials, the parties reached an agreement, whereby the school would pay for the instrument and shipping, and Goodwin would install it in Watchorn Hall. In gratitude for this effort, the school awarded him three credits toward graduation.13 Steuart’s senior recital at Redlands, featuring his own compositions, included a Trio for horn, violin and piano, a Quintet for woodwinds, a Sonata for organ, and a Suite for brass.14 He graduated with a bachelor’s degree in music in 1964.
During this period he built a small organ with paper pipes on which he could play a Haydn clock piece (see photos). Then, in a remarkable coincidence, E. Power Biggs played a recital on the Casavant in the Redlands chapel. Goodwin showed him the paper-pipes organ, and Biggs, unprompted, played that particular Haydn piece on it. Recognizing Steuart’s interest and promise, Biggs suggested that he apply for a Fulbright scholarship to study organbuilding in Europe. In his letter of recommendation to the Institute of International Education, Biggs wrote:

Steuart Goodwin has the possibly-unusual wish to study organ building in Europe, preferably in the center of fine organs, old and new, which is Holland. . . . I cannot think of anyone who would be more qualified for a Fulbright grant than Steuart Goodwin, nor anyone who could make better use of the opportunity. Already at Redlands he has proved his theoretical grasp of the subject, and his ability to transform ideas into action, and practical results.”15

The choice for the Fulbright year abroad for Goodwin, 1964–65, was between Flentrop and von Beckerath. He chose Flentrop because most Hollanders speak English, and his German was very limited. His experience was mixed, probably unlike that of most Fulbright scholars, he comments. He was assigned to the pipe shop where he acquired pipemaking skills, but he had a brief run-in with Mr. Flentrop. Inadvertently interrupting a conference while trying to introduce himself, he was subsequently ushered into the maestro’s office and severely scolded. “If we had been Germans you would have been thrown out immediately,” Flentrop said, adding, “you can stay here if you will simply work in the pipe shop and keep quiet. Try to observe the Dutch boys and behave as they do.”16 This meant never asking questions—asking questions was unheard of for an apprentice. He was never allowed to see the company woodworking shop in Koog an de Zaan. He did, however, make several sets of pipes for the Rugwerk division of the large four-manual Flentrop instrument in St. Mark’s Episcopal Cathedral in Seattle.
At the end of his Flentrop sojourn, Goodwin met with Dr. Martin Vente, internationally renowned organ historian and scholar, who provided him with a map locating important Dutch organs nearby. He spent several days traveling by train and bicycle to see many of them. The one that deeply impressed him and would greatly influence his emerging tonal philosophy and mark his work today was at the Oude Kerk in Amsterdam, ironically dismissed by Flentrop as too romantic.17 “I suffered something of a cognitive dissonance over this, since Flentrop represented the Neo-Baroque ideal espoused by Biggs,” Steuart comments. “I was supposed to like the Baroque, but found myself more deeply moved by the 19th-century voluptuousness of this instrument.”18
Returning from Holland, he opened a small shop in San Bernardino, soon welcoming an opportunity to move to a larger, well-equipped facility nearby, the former Fletcher Planing Mill, whose owner was retiring. There he built three small tracker organs and rebuilt two. Opus 1, a six-rank, two-manual tracker for the Fine Arts building at the University of Redlands, was originally purchased by the organ professor, Raymond Boese. He sold his interest to the university, which paid Steuart a nominal sum and traded him the Hall and Morton instruments. The stoplist comprised a Gemshorn 8' and Principal 2' on Manual I, a Gedeckt 8' and Rohrflute 4' on Manual II, and a 16' Bourdon and 4' Choral Bass on the Pedal, plus the usual couplers. His Opus 2, 1972, was an 11-rank, two-manual tracker for the Fourth Ward Mormon Church in Riverside. In 1973 he built Opus 3, a one-manual, four-rank rental organ. This instrument was used at the Memorial Chapel, University of Redlands, for the Feast of Lights one year, and has been rented by the Ambassador Auditorium and by the Los Angeles Philharmonic and Chamber Orchestras for use in the Dorothy Chandler Pavilion and Hollywood Bowl. It is now in a home in Altadena.19 Reflecting on Opus 1 and 2, he describes this period as his Biggs, Flentrop, Schlicker days and says:

In each of these first two small organs there was to be only one independent eight-foot rank on the Great. It needed to work as an accompanimental sound as well as the foundation for a small principal chorus. At St. Bavo in Holland, I had heard an unforgettably warm tapered hybrid stop called ‘Barpijp,’ which inspired me to use a Gemshorn instead of a less flexible Principal or Stopped Flute. I experimented with using Gemshorns in a Swell division, but soon grew out of that and came to greatly prefer real string tone.20

During this long period of apprenticeship including travel, reading, talking with organists and organbuilders, and perhaps most importantly listening—to records and instruments—his philosophy of organbuilding and tonal ideals were taking shape, and he made certain fundamental decisions about the direction of his emerging career. He determined that he wanted to work individually, expressing his own artistic concepts, free from the constraints of established large builders where opinions differ, compromises are often the rule, and mimicking some academic paradigm or current fashion is required. His primary goal became to achieve “a certain populist sensibility when it comes to providing what will please congregations and audiences.”21 “Many times I have wondered whether to stay [in Redlands], but if I were to work for a nationally known organ builder, I would lose the independence I have here,” he told the San Bernardino Sun-Telegram in 1978.22 And as he told columnist Nelda Stuck of the Redlands Daily Facts in 1987, “There is no area of music I can think of where there are so many factions and arguments about style,” referring to Baroque vs. Romantic pipe organs and tracker vs. electro-pneumatic action.23

Trinity Episcopal Church

Opus 4, an instrument in which he takes particular pride, illustrates the scope of Goodwin’s early work and evidences his talents in voicing and case designs: the 35-rank, 31 speaking stops, three-manual tracker in Trinity Episcopal Church, Redlands, California. Originally built in 1853 by the prominent New York City builder George Jardine for the First Presbyterian Church in Rome, New York, it was acquired by St. Michael’s Ukrainian Catholic Church in Rome in 1908, where it was rebuilt by C. E. Morey of Utica, New York. Meanwhile, Trinity Church in Redlands installed a three-manual Austin, Opus 111, in 1904.24
The Jardine-Morey organ was acquired through the Organ Clearing House, and over a period of 19 months was rebuilt, together with parts of the Austin, as an eclectic instrument combining 802 original and 838 new pipes for a total of 1640 (see 1975 stoplist). This project illustrates the amalgamation of older and new material into an instrument of singular artistic merit. Through a vision of what these two instruments together could and should be, Goodwin was able to “see” how the skilful blending of solo and foundation stops would produce vibrant and colorful choruses and ensembles. This organ fulfills Goodwin’s conviction that there has to be a visual-sonic relationship, i.e., a relationship between what you see and what you hear (see photos). “A pipe organ should be capable of choruses, amalgams of many tones from many pipes, producing a rich, subtly infused musical statement,” he told Dennis Tristram, a reporter for the Riverside Daily Press newspaper.25
In an arched nave opening three lancet arches were formed of oak and filled with 15 newly painted and stenciled dummy pipes retained from the Austin façade. Trinity Church has been described as an example of 19th-century Anglo-American architecture, which led to the chancel case design that Steuart based on the case at Peterborough Cathedral in England designed by Arthur George Hill (1857–1923), described as one of the great Victorian organ builders.26
During the construction of this organ Steuart joined the choir, and ultimately became confirmed as a member of the church. This has provided an unusual opportunity for the builder to repeatedly update and modify the instrument over many years, both tonally and mechanically. The large single bellows was replaced a number of years ago with individual regulators for each division, resulting in steadier wind and the possibility of divisional tremulants. More recently electric stop and combination actions were installed, several ranks were added and others moved around, giving the organ more scope and a more English flavor (see 2004 stoplist).

Tonal evolution

Goodwin’s work is especially noteworthy because it represents the crafting of instruments embracing the required resources in tonal families and pitches capable of performing the great music of antiquity as well as today’s requirements, but one that is free from the strident and narrow definitions of Baroque, Neo-Baroque, North German, South German, or American Classic stoplists, scales, wind pressures, and voicing. These eclectic instruments, beginning with the work of individual artisans and small shops, have influenced a new style of organs, free from the prejudices against stops that in the 1950s were considered “old hat” and indicative of an obsolete organ that should be replaced. Formerly verboten stops—the Melodia, Cornopean, Harmonic Flute, and Vox Humana, for example—are now recognized for their intrinsic musical content and are often embraced without hesitation by many builders who incorporate them in their instruments, confident of their ongoing musical value. This approach extends to the use of wooden flue work and open flutes, a defining characteristic of American organbuilding from the very beginning, but largely eschewed in the 1950s in favor of metal ranks and tapered, half-tapered, stopped, and chimneyed stops.
Steuart’s Opus 5 was a restoration for St. Mark’s Episcopal Church in Upland, California, of E. & G. G. Hook & Hastings’ Opus 734, 1873, formerly located in the First Baptist Church in Bloomington, Illinois. Opus 6 is a four-rank, two-manual house organ, featuring an ornate case and suspended action (see photo).27 This is an early example of an elaborate 18th-century case as built by the Dutch and Germans and pioneered by John Brombaugh in America at a time when the European builders were building modern cases in this country. In 1978, in a brief detour from mechanical action, Steuart built a two-manual, six-rank unit organ with electric action for the United Methodist Church in Yucaipa, California. “I never built another unit organ for a church,” he comments. “I am enthusiastic about the unit principle for a theatre organ, but you can easily overdo it in church work if you are concerned about good tone.”28
In 1978, David Dixon, who met Manuel Rosales at Schlicker in Buffalo and who became his partner in Los Angeles (and who later returned to Schlicker before his untimely death at an early age), approached Steuart about working for them, which he elected to do. He assisted in their introduction to tracker work, in designing cases, traded organ philosophy with Manuel, and acquired some refinements in voicing technique from Dixon.
Opus 8, a 13-rank, two-manual electropneumatic action organ for the First Baptist Church in Colton, California in 1979, marked a major milestone in Goodwin’s tonal philosophy, and contains elements that characterize his later work. In earlier years he was interested in tracker action, but over time came to believe that even 11 ranks (Opus 2, Fourth Ward Chapel, L.D.S. Church, Riverside) in a tracker aren’t very flexible. He became convinced of the value of a unit Gedeckt stop, which he first used in Colton and subsequently on several 12- or 13-rank instruments (see stoplists for Colton and St. George’s Episcopal Church). He began searching for a small, flexible church organ design, and the unit Gedeckt was part of the answer. “I hit upon it almost by accident while contemplating for Colton how to best use a couple of pitman chests incorporating one unit chest,”29 he comments, adding:
“The concept begins, as usual, with a complete principal chorus, 8' through mixture, on the Great. Next, on the Swell, I use a pair of strings (real string tone, not hybrids), a medium-bright Trumpet, and (where space and finances permit) a 4' Principal or Fugara. Budgetary concerns generally limit independent pedal ranks to the ubiquitous 16' Bourdon. The Great also contains an open metal flute, which, in the Colton prototype, was originally part of an Aeolian house organ. The pipes looked ridiculous to one brought up on Neo-Baroque ideals. The heavily nicked mouths were cut-up two-thirds in a half circle, and, yet, when you blew on them they were magically beautiful. I began to realize that you couldn’t depend on what other people said was good, you had to trust your own ears.
“The 85 to 97 pipes of a Lieblich Gedeckt are located on a unit chest in the Swell box. This rank is made available at three pitches on the Great, six on the Swell, and four to six pitches on the Pedal. Importantly, the Gedeckt stop tabs on each division are grouped together to the right of the straight stops and couplers, and they are not affected by the couplers.
“This arrangement makes the structure of the tonal design quickly apparent to an organist, while simultaneously making registration practically goof-proof. For instance, it is impossible to mix the derived mutations on the Swell with the principal chorus on the Great. I settled on the Lieblich Gedeckt for the one unified rank because it blends well at all pitches and because the pitch-beats caused by an equal-tempered rank used at mutation pitches are only barely discernible.
“In an organ of only 12 or 13 ranks, one can make dozens of useful combinations and build ensembles suggesting a much larger instrument. For instance, on the Pedal the 51⁄3' through 2' pitches—when used with the Great chorus coupled—reinforce the 16' line and create the impression that there is a Pedal mixture. A solo Cornet effect can be registered as follows: couple the string and celeste to the Great and silence them on the Swell using the Unison Off. Then set a solo combination of Gedeckt pitches such as 8', 4', 22⁄3' and 13⁄5' on the Swell (tremulant optional).
“The point of all this is to provide excellent sound and unusual flexibility in a small church organ design. To keep these organs even more affordable, we incorporate many used parts and pipes. A brand new console shell is hardly a necessity when so many are available used. I like to put the money where it counts the most—in careful voicing and tonal finishing, new electronic relays, and high quality visual designs.”30
The discovery of the Aeolian open metal flute, quixotically called Flute Piano (apparently for people barely musical and certainly not organists) was to mark a milestone in Goodwin’s career. Placed in the Great of his instrument in Colton, it proved to be of such great value as both a solo and ensemble stop that it led him to incorporate 8¢ open flutes on that division routinely. Most instruments, having a Chimney Flute on the Great and Gedeckt on the Swell, don’t have the flexibility of an open 8' flute, an important color in his judgment, adding, “I voice it quietly in the bass and midrange and somewhat ascendant from middle C up so one rank can be used three ways: as an accompaniment stop in the left hand, a solo stop in the treble and a lighter foundation than a Diapason in a Principal chorus.”31
Perhaps the most impressive example is found at Holy Cross Church in Santa Cruz, California. Built in 1889 on the site of one of the famous Spanish Missions, Holy Cross is an imposing neo-Gothic brick building with splendid acoustics. Starting with a 13-rank A. B. Felgemaker tracker obtained through Alan Laufman and the Organ Clearing House, Goodwin added 10 ranks including an open metal flute, two mixtures, two chorus reeds and a string celeste (see before and after stoplists above right, and photo on page 28).
In 1995, Steuart installed his Opus 15, a remarkably cohesive two-manual and pedal organ of 12 ranks, featuring the unit Gedeckt and the 8' open flute discussed above in St. George’s Episcopal Church, Riverside (see stoplist on page 26, and photo left). The striking white oak case is accented with bronze moldings and padouk wood stripes.32

Voicing and tonal finishing

In 1980 Steuart became associated with the Schoenstein firm in San Francisco, which marked still another chapter in his career, one that would grow and distinguish his work today. He worked closely with Jack Bethards, Schoenstein president, in the major renovation of the epic Aeolian-Skinner organ in the Mormon Tabernacle in Salt Lake City, where he did most of the flue voicing. Bethards does extensive consulting coast-to-coast, and when he concludes that the major problem with an organ is inferior tonal work, he often recommends Steuart, who, working with his assistant Wendell Ballantyne, has had nationwide assignments: New York, Georgia, Texas, and North Carolina. Reworking an older instrument almost always begins with a sensitive new organist, and one job leads to another. This work typically involves removing sizzle and chiff, increasing foundation tone, repitching a mixture with new breaks, and replacing unsuitable pipes. With his fine reputation as a voicer and finisher, when prospects hear his work, they want the same thing. For example, Steuart’s current work at the Covenant Presbyterian Church in Charlotte, North Carolina, is the direct result of his work at Myers Park Baptist Church there. Goodwin’s recent theatre work includes voicing, in collaboration with Lynn Larsen, a large theatre and romantic instrument in the home of Adrian Phillips in Phoenix, Arizona, and completing a mostly seven-rank Wurlitzer organ in his own home in Highland. His much admired tonal work on the epic four-manual, 26-rank Wurlitzer in Plummer Auditorium, Fullerton, led to his election to the governing board of the Orange County Theatre Organ Society.33

Summary

In a varied career marked by many accomplishments, Steuart Goodwin represents the individual organbuilder, working alone or in collaboration with others, a vital segment in the spectrum of organbuilding in America today. Long neglected but deserving of greater recognition, the work of these persons may well assume greater significance in the future of the trade and the instrument. Beginning with a rich musical background, often both instrumental and vocal, which continues, they acquire the knowledge and skills of building the pipe organ through travel, reading, observation and apprenticeship. In their deep commitment to the King of Instruments, they gladly sacrifice more lucrative occupations. Today and tomorrow, amid the manifold and far-reaching changes in our culture, the majestic pipe organ is recognized as a work of art and the work of an artist. There can be no better example of this truth than the life and work of Steuart Goodwin.
 

Steuart Goodwin & Co. Opus List

1. 1970. Two-manual, six-rank tracker practice organ. Now in home of Dr. Harold Knight in Dallas, Texas.
2. 1972. Two-manual, 11-rank tracker, 4th Ward, Church of Jesus Christ of Latter-day Saints, Riverside, California.
3. 1974. One-manual, four-rank portable rental organ. Now in home of Bruce and Mary Elgin, Altadena, California.
4. 1976. Three-manual, 35-rank tracker, Trinity Episcopal Church, Redlands, California. With components of an 1852 Jardine from Rome, New York, obtained through the Organ Clearing House.
5. 1977. Two-manual, 17-rank tracker, St. Mark’s Episcopal Church, Upland, California. Rebuild of E. & G. G. Hook & Hastings #734, 1873, obtained through the Organ Clearing House.
6. 1978. Two-manual, four-rank practice organ in the home of Frances Olson, Mount Baldy Village, California.
7. 1978. Two-manual, six-rank unit organ, now in St. John’s Episcopal Church, Corona, California.
8. 1979. Two-manual, 13-rank electro-pneumatic, First Baptist Church, Colton, California.
9. 1984. Two-manual, 13-rank tracker, Our Lady of the Rosary Cathedral, San Bernardino, California. Rebuild of Moller #1701, 1913, obtained through the Organ Clearing House.
10. 1988. Two-manual, 23-rank tracker, Holy Cross Church, Santa Cruz, California. Based on A. B. Felgemaker #506, 1889, enlarged and considerably modified visually and tonally.
11. 1991. Two-manual, 11-rank, electric action, Stake Center, Church of Jesus Christ of Latter-day Saints, Simi Valley, California. Incorporates many pipes and parts of Moller #5482, 1928, obtained through the Organ Clearing House.
12. 1992. Two-manual, 13-rank electro-pneumatic, Fontana Community Church, Fontana, California. Incorporates console and many pipes from the church’s 1920s Spencer organ.
13. 1993. Three-manual, 38-rank, electric slider chests, First Christian Church, Pomona, California. Extensive tonal revisions. Based on Hook & Hastings #2240 with prior modifications and additions by Ken Simpson and Abbott & Sieker.
14. 1995. Two-manual, 19-rank, electric and electro-pneumatic, St. Timothy Lutheran Church, Lakewood, California.
15. 1995. Two-manual, 12-rank, electro-pneumatic, St. George’s Episcopal Church, Riverside, California.

Other work

The tonal finishing team of Steuart Goodwin and Wendell Ballantyne has done extensive work on organs in California, Georgia, North Carolina, New York, Texas and Utah.
Steuart has worked on many case design and voicing projects with Rosales Organbuilders and Schoenstein & Co. For photographs and details visit .
For research input and critical comments on earlier drafts of this paper, the author gratefully acknowledges: Edward Ballantyne, Jack Bethards, Ken W. List, Albert Neutel, Donald Olson, Michael Quimby, Robert Reich, Manuel Rosales, Jack Sievert, and R. E. Wagner.

Berghaus Pipe Organ Builders,
Bellwood, Illinois, was established as Berghaus Organ
Company in 1967 in Melrose Park, Illinois.  

Cover photos, top: La Casa de Cristo Lutheran Church, Scottsdale, Arizona (2008); middle: O’Fallon United Church of Christ, O’Fallon, Illinois (1973); Sacred Heart School of Theology, Hales Corners, Wisconsin (1990); First United Methodist Church, South Bend, Indiana (1988); bottom: St. Benedict’s Parish, Chesapeake, Virginia (2015).

From the Founder

A native of Cleveland, Ohio, I was encouraged to leave home to seek my education at Concordia Teachers College (now Concordia University Chicago) in River Forest, Illinois. After graduation, I married and worked for several years as a parochial school teacher and church organist/choir director. My unexpected decision to enter the organ-building trade was chiefly influenced by two instruments and two men.

Before I left Ohio, Trinity Lutheran Church in Cleveland began installing a four-manual and pedal mechanical-action organ from the Beckerath company of Hamburg, Germany, which was completed in 1956. The church was near my house, and my curiosity, for some unknown reason, led me to make frequent visits during its installation and voicing. I had no earthly idea that this organ would lay the groundwork for my organbuilding philosophy! 

While still enrolled at Concordia, my informal apprenticeship for organbuilding began as I started to repair the slider chests on an 1888 Jackson Organ Company (Chester, Illinois) tracker at St. Matthew Lutheran Church on the south side of Chicago. Slowly, the organ came back to life as I repaired badly damaged pipes, broken trackers, and cracked rollerboards. We found a second-hand pedalboard to replace the original and installed key extensions to accept mechanical connections to the pedal chests and couplers. By repairing an ancient blower and wind system, a somewhat compromised new life to the organ was born. By 1961 the organ was again used for services. Subsequently, the congregation authorized Berghaus Organ Company to extensively rebuild the organ with new slider chests, pipework, action, and wind system. Since 1972 the organ remains as rebuilt.

Why devote time to these two churches and their organs? These were my mind and eye openers! I had a gnawing curiosity to tear into the old Jackson organ, find out what went wrong, and fix it! In the Beckerath, I had a “new” organ for comparison.

Sometime in 1967 while a fifth and sixth grade teacher, I was approached by John F. Shawhan, the Midwest service and sales representative of Casavant Frères of Canada, to take over a dozen or so contracts to provide semiannual service and maintenance for new Casavants located from Des Moines to Fort Wayne. I still had no plans on becoming an organbuilder, but November 1967 was my final month as a teacher. John paired me up with his assistant, Paul Jochum, who spent time in the Beckerath shop as a general apprentice. When I first met Paul, I assumed that I would be the tuner and he would be the key holder. But that is not how he had it planned! He insisted that he tune and I sit at the console. And that was the arrangement for all the years we worked together. His disciplined tuning was impeccable and went so far as to check the tuning of higher-pitched mixtures by listening through the entire stop without the tuning stop on! 

As the service and tuning business grew, the opportunity came along to build an instrument. The O’Fallon United Church of Christ in southern Illinois was planning an extensive renovation of its church. The original Kilgen tracker was entombed behind the altar and was in serious need of repair. Casavant turned down the project and asked Berghaus to consider it. I, too, turned down the opportunity to renovate the old Kilgen.

They asked, “Who do you recommend to do the renovation?” I said that I would build a new mechanical-action organ for them instead. What did I have to show? Nothing! But they chose Berghaus despite our lack of experience. The contract was signed and construction took place in a 24′ by 27′ garage with an extremely limited number of tools and space. Today, this organ stands as built in 1973. A few years ago, we thoroughly cleaned it and set it back on course for another 40-plus years of faithful service.

After O’Fallon, four contracts were negotiated in fairly rapid succession for 2-manual and pedal mechanical-action organs. As these were being built, a noticeable change in design requests followed: namely, to retain the mechanical key action, but to abandon the mechanical stop action and utilize a more user-friendly stop control system. This was an acceptable alternative to me, as it did not affect the key action or the windchest design. I was firmly convinced that slider windchests were the best chests in the world! The most striking change came with the detached, moveable console, requiring the separation of the direct key action from the windchests, which we accommodated by installing electric pull-down magnets outside the pallet box. 

Our stay in a house basement and two-car garage lasted a very short time. By 1973 we moved to Bellwood into a facility of approximately 4,000 square feet and a ceiling height of only 13 feet. A number of organs exceeding that height were built in this low-ceiling room. In 1984, a two-story erecting room and design and fabrication spaces were added to facilitate construction of larger instruments.  

Time passed so fast that it became unnoticeable. My wife, Judy, worked many years as the office manager. Both of our sons, Todd and Brian, served us well in service projects, organ construction, and installations. It would be Brian whom I would entrust with continuing my work by taking the leadership of the company into the second generation. Along the way, he would build a team around him.

­—Leonard G. Berghaus

From the Tonal Director

When I joined Berghaus in 2006, the company was in a period of transition. While the hallmarks of slider chests, open-toe voicing, and Werkprinzip were still present in many instruments, a few others were examples of a more eclectic approach to tonal design. The 2003 four-manual instrument created for St. Stephen’s Episcopal Church in Wilkes-Barre, Pennsylvania, combined new resources with many ranks from the Aeolian-Skinner organ built in the 1950s. The result was decidedly more American Classic in sound, and it has enjoyed great success in live performance as well as several recordings. Subsequent years saw the installation of more eclectic organs at St. John’s Lutheran Church, Bloomington, Illinois (3 manuals, 46 ranks), and Queen of All Saints Basilica, Chicago, Illinois (3 manuals, 60 ranks).  

My own background in pipe organs began at the age of 13, when I first took organ lessons and began playing church services some months later. I had always been fascinated with the pipe organ; I used to spend many hours listening to recordings of instruments from all over the world, conjuring up stoplists, and occasionally attempting to design casework and façades. Little did I know then that this would ultimately become my career! I completed organ studies at Valparaiso University and The Juilliard School; these institutions educated me with a solid foundation of organ performance in both concert and church settings. My many opportunities to perform around the country allowed me first-hand experience with the great wealth of pipe organs in this nation, and I began to formulate my thoughts of what my own personal tonal signature would be. 

In 2007, the Berghaus-built organ for St. John’s Episcopal Church, Chevy Chase, Maryland, would be my first opportunity to make my mark. With a stoplist that leans more into the French Romantic realm (complete with a sumptuous Cavaillé-Coll-style drawknob console), this instrument of 3 manuals and 63 ranks began a new era for our company. The organ, both in its stoplist and tonal approach, is a synthesis of classical and romantic styles. As a result, it emphasizes a clear and singing sound in the individual stops, while at the same time providing warmth and depth when stops are used in combination. Each division contains a complete principal chorus, characteristic flute stops, and reeds both fiery and more subdued. Decidedly different from previous instruments is the treatment of string and reed tone. The Grand-Orgue and Récit contain Salicionals with more harmonic prominence, which aid in carrying accompaniment lines found in homophonic music. While our past instruments accentuated the build-up of the Tutti through upperwork and mixtures, this organ places reed tone in the several Trompette and Bombarde ranks at the fore, paying homage to the symphonic style.

These principles were also carried out in the instruments of 2007–08: St. Jerome Catholic Church in Oconomowoc, Wisconsin (3 manuals, 53 ranks), built in collaboration with Scott R. Riedel & Associates as the organ consultant/acoustician, and First Lutheran Church, Manitowoc, Wisconsin (3 manuals, 41 ranks). 

2008 brought an extraordinary opportunity to construct our magnum opus for La Casa de Cristo Lutheran Church in Scottsdale, Arizona. Taking cues from the American Classic and Romantic traditions, our tonal approach was to design an eclectic instrument that would handle a wide range of repertoire, capable of a vast amount of both dynamic and tonal expression. To that end, there are no less than five manual 8′ Principals, ten different 8′ and 4′ flutes, and strings and hybrid (tapered) stops, which are of varying tone and construction. The versatility of this instrument is the result of our ability to finish every stop as its own beautifully unique voice and also as a worthy contributor in combination.

Given the challenge of designing a 92-rank organ with only one division under expression, it became clear from the beginning that great care would need to be taken in the tonal finishing process to ensure the success of a seamless crescendo and equally balanced manual divisions. The ranks of the Positiv division are designed and voiced so as to provide a remarkable degree of expressiveness for an unenclosed division. The overall effect in the crescendo is that of a continuous transition from ppp to fff without any staggering dynamic or color steps.

In recent years, because of economic challenges, many churches have elected not to build entirely new instruments, but to retain as much as they could from their current organ or investigate viable options of transplanting a vintage instrument. One of our unique endeavors was creating an instrument for First Presbyterian Church, Johnson City, Tennessee, by combining resources from two organs in need of a new home: a 1930 Casavant from Our Lady of Grace, Chicago, and the Berghaus from Christ Lutheran Church, Cleveland, Ohio. On paper, these two disparate tonal concepts would not necessarily work well by merely placing stops together. To achieve good blend within and among the divisions, and to provide appropriate combinations for musical performance, we decided to keep the Great and Swell divisions of the Berghaus together, but reassign them and enhance the 8′ tone to be adequately scaled for the new space. The new Great and Pedal divisions would combine new pipework and vintage stops that were fully restored or changed to blend with the overall tonal concept. We have also successfully installed instruments of this type with the help of consultant Wayne Wagner at Zion Lutheran Church, Columbus, Wisconsin (2 manuals, 24 ranks) and in partnership with Edward Meyer at Luther Preparatory School, Watertown, Wisconsin (2 manuals, 35 ranks). 

2014 brought us an opportunity to work with organist and historical author Peggy Kelley Reinburg, who acted as consultant for St. Benedict’s Parish, Chesapeake, Virginia. Her insight into pipe organs and tonal design proved to be an invaluable resource. Together with her, we collaborated to present an instrument with a heart of simplicity and clarity, rooted in North German tradition but also possessing a distinctive voice. This instrument brings our company full circle to its early beginnings—confident in the creation of instruments in a classic style, while tailoring tonal schemes that serve the specific needs of our many different clients.

As Berghaus celebrates 50 years, we can applaud the first instruments of our founder, Leonard Berghaus, and his many successful contributions to organbuilding. Each instrument that has been produced since I started in 2006 is unique in its own right, and I am truly proud of them all. I look forward to what the next years will bring, both in challenges and opportunities.

—Jonathan Oblander

From the President

My apprenticeship at Berghaus began at a very young age. I have fond memories of being pulled out of class at Grace Lutheran School to help assist with organ repairs, or so they thought! Little did I know that this would set the stage for my life’s work. My high school summers were spent working for Berghaus in a variety of roles, and in 1988 I began my full-time position. My training and work experience was primarily in casework, structure, winding, and windchest construction. As time went on, I gradually moved into project management for several years before being appointed vice president in 1999. In 2004, I was named president of the firm.

During the mid-1990s, I began to look to the future of the company and realized that to grow and remain viable, we would have to employ a new business model of separating the new organs from the service side and executing multiple projects at once. A larger facility would be needed to accommodate the change. In 1999, after several years of exploring various options, including construction of a new facility, we located a building. Although it had been vacant for a number of years, the advantages far outweighed the drawbacks. Its location less than a mile from our previous facility meant that the remodeling process and relocation would have a minimum impact on our production schedule and the more than 200 clients for whom the company provided service and maintenance.  

The move in 2001 from a 6,700-square-foot building to a 30,000-square-foot plant afforded Berghaus the opportunity to design a more streamlined approach to our processes. A new set-up room with a ceiling height of 38 feet was constructed to accommodate larger instruments. The remodeled service area allowed for a clean and spacious environment to accomplish all aspects of organ service and maintenance. One of the depressed loading docks was filled in to create additional 26′ by 52′ space for managing multiple projects simultaneously. Four separate voicing rooms were created to allow our artisans to excel in their craft. A conference room and spacious office area completed the updated state-of-the-art facility. The building underwent other significant structural updates and improvements, including a new fire/burglar alarm system and surveillance for safety and the protection of our clients’ property.  

In addition, the new facility allowed us to install more efficient and larger equipment to the plant floor. A new spray booth, dust collection system, 54-inch-wide belt sander, and multiple TigerStops^TM significantly updated our production process. With four new vacuum press tables, we were able to press up to eight slider chests in one day, something that would have taken us four days to accomplish in the past. Recent additions to our technology include a 3-D printer and planning for the installation of a large CNC machine. 

With my father nearing retirement, there was no doubt in my mind that a different business model would be needed to propel the company forward and continue our commitment to excellence. His were big shoes to fill. It is sobering and gratifying when I think of the many former Berghaus employees who were mentored by my father and have prominent positions throughout the industry. Preserving his legacy and continuing his life’s work was a daunting task. To accomplish this, I created a new team approach made up of a variety of artisans with the same dedication to the art of organbuilding that my father instilled in me. The new methodology produced a positive, collaborative working environment and a superior instrument, resulting in a secure future for all.

Berghaus has a history of successfully building both mechanical action and electric slider chest instruments and has continually made improvements to its approach. At the turn of the century, the advances started accelerating as the new Berghaus team began incorporating wooden windlines, 1.75-inch tongue and groove solid hardwood enclosures, European racking, and fastidious wire management into the construction techniques. Today, three-dimensional modeling and design create a realistic representation for new instrument presentation drawings and aid in the efficiency of in-shop construction. The case and console designs are an organic part of the rooms in which they reside. Our tonal finishing is, quite simply, second to none. Along with the aforementioned construction changes, we have an overhauled marketing approach with a new corporate image, website, and brochure.

What did not change was our commitment to maintaining high standards for every task our clients hire us to do, from tuning and service to building new instruments. We take great pride in tuning throughout the Midwest and beyond. From emergency service seven days a week to releathering reservoirs or cleaning instruments, our service business is paramount to our success and we appreciate the trust our clients have in us.

Our company is still devoted to the time-honored tradition of slider chests, low to moderate wind pressures, and pure and natural voicing practices. Our later instruments retain these hallmarks while presenting new colors and possibilities for performance of many schools of organ composition. Celebrating our 50th anniversary gives me the opportunity to reflect on the past and contemplate the honor of leading Berghaus into the future. The tremendous pride and respect I have for my staff and their accomplishments cannot be expressed in words. 

—Brian D. Berghaus

Please mark your calendars to celebrate the Berghaus 50th Anniversary with a recital at Grace Lutheran Church, River Forest, Illinois, November 12, 4:00 p.m. A reception will follow in the fellowship hall.

What do organists really know about organbuilders?

David Lowry, DMA, HonRSCM, is Professor Emeritus of Music at Winthrop University, Rock Hill, South Carolina, and the Parish Musician of the Church of the Good Shepherd, Columbia, South Carolina. 

The American Institute of Organbuilders held its 40th annual convention October 6–9, 2013, in Winston-Salem, North Carolina. The AIO is an educational organization dedicated to advancing the art of organ building “by discussion, inquiry, research, experiment, and other means.” AIO members are professional organbuilders, service technicians, and suppliers who subscribe to the institute’s objectives and its Code of Ethics. There are over 400 members. 

Begun in 1973, the AIO continues as a vital organization with a fine board of directors, a quarterly journal, and a consistent pattern of annual conventions. The AIO awards certificates for Service, for Colleague, and for Fellow, based on tests of knowledge and understanding of organ building, similar to the AGO certifications for organ playing. 

At this 40th convention, there were some 180 registrants, including 110 members. About 80 elected to stay for a post-convention trip to Durham and Raleigh. There were 21 exhibitors, five of whom were from outside the United States.

Many organists in church and/or education positions inevitably know a few pipe organ service people, some of whom are actually builders of pipe organs. Many become friends and are often of great value to organists, who must defend their instruments by educating their congregations and colleagues on why an organ has to be “fixed” and why it “costs so much.” 

A few organists actually become adept at making a quick and safe fix to a problem without calling the organbuilder or maintenance people. Some higher-education institutions actually offer a course in how to take care of that one trumpet pipe that is out of tune before an important liturgy, or how to pull a pipe safely if it is ciphering, among a host of other little maladies. At the same time, plenty of service people can tell you horror stories of organists mutilating pipes with duct tape or bending them hopelessly out of shape. 

When organists gather in conventions, the focus is almost always on performances of music, plus workshops on everything from fingering to phrasing, or the intrepid pursuit of performance practice, or the history and analysis of music. 

How many organists know what organbuilders regard as important in their conventions? The difference in the two types of conventions—organists vs. organbuilders—is remarkable and encouraging. Despite feeling somewhat like a spy, this writer received a formal invitation to observe the 40th anniversary activities and report them to the organ-playing world. (I once enjoyed being an employee of an organ-building firm when I was a senior in high school. I learned to solder cable wires to junction boards, tune pipes, releather pouches, deal with Pilcher chests, and meet the famous consultant William Harrison Barnes! That did not make me an organ builder, but at least I understood some basics. All that was long before the computer chip.) The AIO may well be responsible for making “organbuilder” a single word. 

The 40th annual convention took advantage of some remarkable historic venues in central North Carolina, in addition to superb hotel accommodations with fine facilities for meetings, exhibits, and food. What is immediately obvious is that an AIO convention is not about organ playing. Little music is heard. When visiting organs, members listen to brief sounds of individual stops. They also sing a hymn during each organ inspection.

There were some pre-convention activities in Winston-Salem. On Saturday, some members visited the 1918 Æolian Company Opus 1404 in the Reynolda House; the organ’s restoration, by Norman Ryan and Richard Houghten, is in progress. On Sunday there was a visit to the organ shop of John Farmer, followed by choral Evensong at St. Paul’s Episcopal Church with its four-manual, 50-stop Skinner organ, Opus 712, 1928, restored by A. Thompson-Allen Company. In the chapel at St. Paul’s is the two-manual, 17-stop, 2004 C. B. Fisk Opus 131, built in collaboration with Schreiner Pipe Organs, Ltd., Opus 8. That visit included looking at Fisk’s borrow actions. The pedal department of this organ has just one pedal stop and five borrowed voices from the Great manual. 

On Monday and Wednesday there were a total of eight lectures in the hotel lecture room.

Scott R. Riedel & Associates

“Working with a Consultant”

Scott Riedel discussed issues in dealing with church committees—from the tensions of committees saying “too much money for music,” “fear of fundraising,” “most people go to the contemporary service and never hear the organ [not true, they go to weddings and funerals]”—to the matters of contacting builders and reviewing how to achieve the best builder for the situation. 

Schreiner Pipe Organs, Ltd. 

“Pedal Borrows on Mechanical Actions”

For those committed to mechanical action, John Schreiner supplied video details on how to design borrowing manual stops to be played in the pedals: “Either/Or” is one way; “And” is the other way. Those deeply engaged in mechanical-action organs found
Schreiner’s acumen most valuable.

Joseph Rotella

“Saving Green by Going Green”

Joe Rotella of Spencer Organ Company, Inc., has great interest in keeping green, thereby saving “green” money. He explored energy conservation including government subsidies, electricity, vehicles, energy audits, waste and toxicity reduction, as well as personal health, gardening, and thinking “local first.” His logo signifying “Reduce, Reuse, Recycle” is a powerful consideration for all builders. 

Charles Kegg of Kegg Pipe Organ Builders, and C. Joseph Nichols of Nichols & Simpson, Inc.

“When the Client Asks . . .” 

In response to the question “How many here have employed electronic sounds in your organs?” numerous hands were in the air. (As the English language changes, the use of “digital” and “electronic” is still in flux.) One of the two panelists of the discussion agreed to use electronic sounds for the bottom 12 notes of a 32′ stop; the other agreed to be judicious about electronic stops, but “the organ needs to still be an organ when you pull the plug.” The discussion was unquestionably a sensitive one across the room, and it remained frank, polite, and quite ethical. 

A curious question sparked more commentary: for electronic sounds that are sampled, is there a warranty question about who owns the sound? The electronic-sound issue remains a very serious and sensitive question among organbuilders, for which there will be no immediate answer.

David Pillsbury

“Hearing Protection”

The guest lecturer was David Pillsbury, retired director of audiology and speech pathology, Wake Forest Baptist Hospital. Organ technicians must be able to hear critical things in the way an individual pipe sounds, and how they relate to each other within a rank—whether tuning or voicing. The discussion included video examples on how the ear is constructed, plus important cautions on protection, and information on the various products that provide protection. 

Bryan Timm and Randy Wagner, Organ Supply Industries

“Scales and Why We Use What We Do”

Timm and Wagner provided a scholarly paper on “Scales and Why We Use Them, or, Starting with Grandma’s Meatloaf,” a fine academic analysis of how the modern organ industry has come to use the measurements of pipes, or just as importantly, how we alter those measurements. They promised to continue in the future to present the obvious next chapter: how pipe mouth dimensions are measured and employed. 

John Dixon

“Portable Technology for Business”

John Dixon is a representative from ComputerTree, Inc. of Winston-Salem and Atlanta, a technology professional services corporation. He reviewed a surprising amount of information about the advantages of digital communication that lightens the load of toolboxes and contributes to meeting needs while on the job and/or maintaining the business aspects of organ technology. 

Greg Williams

“Wood Finishing Techniques” 

Greg Williams, a private consultant to the wood finishing and refinishing industry, presented a two-hour lecture on waterborne (not water-based) wood finishing products and detailed procedures in wood products, for organs that include pipes, cases, façades, and consoles. The discussion included the production of new wood parts as well as the frequent need for touch-up techniques when rebuilding or restoring organs. 

A visit to Old Salem

On Tuesday, a short bus trip to Old Salem began in the Old Salem Visitors’ Center, a pleasant 2003 building in which an auditorium houses the 1800 David Tannenberg organ, restored by Taylor & Boody in 2003. John Boody, making use of excellent videos, talked about the restoration. Boody was most articulate and engaging in this fascinating project. 

He was followed by Lou Carol Fix, who read from her publication, “The Organ in Moravian Church Music,” outlining the significant influence the Moravians had in helping establish the use of the organ in Moravian worship. Following was a Singstunde (a Moravian Song Service), for which Fix played the 1800 Tannenberg as AIO registrants sang several hymns. 

Free time walking around Old Salem allowed the AIO into the Single Brothers’ House, where Scott Carpenter demonstrated the David Tannenberg 1789 one-manual and pedal, five-stop organ, restored by Taylor & Boody in 2007. Then in the Single Sisters’ House, Susan Bates demonstrated the Henry Erben 1830 one-manual, five-stop organ, restored by Taylor & Boody in 2008. 

Finally, we visited Home Moravian Church, where the 1800 Tannenberg was once housed, to hear the 3-manual, 43-stop, 1959 Aeolian-Skinner Opus 1340, with commentary by John Farmer. 

Some readers of this report who know Old Salem are aware there is a fine 1965 Flentrop organ in Salem College. The convention could not book the space because the Flentrop firm was contracted to be revoicing the instrument. As it happened, the work had been completed just before the convention, but the schedules could not be changed for the AIO to hear it. 

St. Timothy’s Episcopal Church

Our fascinating visit to this fine modern building with a remarkably warm, resonant acoustic found the restored 1898 Hook & Hastings Opus 1801 (three manuals, 34 stops) being installed in the west gallery by John Farmer of J. Allen Farmer, Inc. The late director of the Organ Clearing House, Alan Laufman, brought this organ to the attention of Farmer, a member of St. Timothy’s Episcopal Church. Farmer removed it from a church in Massachusetts where it had been dormant for decades and was about to be destroyed along with the building. Farmer stored the organ in his home. Progress was slow—another decade—before the church embraced the concept of restoring the organ in St. Timothy’s. Despite not hearing an organ, the AIO sang a hymn anyway to enjoy the wonderful acoustic. This promises to be a remarkable installation, with completion perhaps by Easter 2014.

University of North Carolina School of the Arts

An optional jaunt over to the School of the Arts drew only a few registrants to hear the 1977 C. B. Fisk Opus 75 in a concert by four students and their professor, Timothy Olsen. The students came back early from their fall break to play on this notably aggressive Fisk. It was striking to think of the positive future of the organ world with such well-prepared talent. Performers were: high school junior Raymond Hawkins, undergraduates Pat Crowe and Christopher Engel, and graduate student Daniel Johnson. 

Post-convention trip to Durham and Raleigh

On Thursday, the first stop, an hour-and-a-half away, was on Chapel Drive at Duke University in Durham, North Carolina, where the Duke Chapel remains one of our nation’s most thrilling architectural sights. There were four organs to inspect—count them—four. 

First was the recent organ by Richards, Fowkes & Co. Bruce Fowkes talked about the instrument and the space it is in, the Goodson Chapel of the Duke Divinity School, a remarkably fine room with a superb acoustic. Also on hand for the demonstration of the four organs were no less than Andrew Pester and Dongho Lee (they are husband and wife), who provided excellent contributions from the four consoles. 

Next was the two-manual, 21-stop, 1997 John Brombaugh Opus 34 in the small chapel, entered from the north transept of the chapel. The bottom manual is of Renaissance Italian design, and the second manual is Germanic, all in meantone temperament. 

The third demonstration was on the famous four-manual, 66-stop, 1976 organ by Flentrop Orgelbouw standing proudly in the gallery at the west end of the chapel. The chapel itself was built with the infamous Guastavino sound-absorbing tile that, at Flentrop’s suggestion, was sealed with a silicone sealant. Thanks to that, the chapel indeed sounds the way it looks: idyllic. 

The fourth event was the long-awaited hearing of the 1932 Æolian Company organ, Opus 1785, restored in 2008 by Foley-Baker, Inc. (See “Cover feature,” The Diapason, April 2012, pp. 25–27.) The organ has a new four-manual console to control the 6,600 pipes in five divisions, all in the chapel’s east end chancel. Once the demonstration of the stops was complete, Dongho Lee put the Dupré Prelude in B Major on the rack and thrilled the heck out of everyone. 

David Arcus, who for some 30 years was Chapel Organist and Associate University Organist, left Duke University at the end of 2013. Dr. Arcus was not present for the AIO visit as he was playing a recital elsewhere.

The final part of the post-convention activity was a visit to three recent organs in nearby Raleigh. 

The first stop was the Church of the Nativity, where the 2007 Andover Organ Company, Opus 115, two manuals, twenty stops (eight prepared), was demonstrated in the small worship space. 

Our second stop was at St. Michael’s Episcopal Church, where Kevin Kerstetter proudly demonstrated the three-manual, 47-stop 2012 Nichols & Simpson, Inc. organ. 

The last visit was to the Hayes Barton United Methodist Church, where the 2010 three-manual, 43-stop Buzard Pipe Organ Builders Opus 39 is installed. The demonstration and singing of a hymn was led by no less than the builder’s son, Stephen Buzard, assistant organist of St. Thomas Church Fifth Avenue in New York City. Following that, Stephen Buzard rendered a stunning performance of Edward Elgar’s Sonata in G Major, op. 28, featuring the organ’s symphonic character. 

That the AIO is 40 years old and clearly a valuable asset to the organ building industry calls for celebrating this milestone. Matthew Bellocchio of the Andover Organ Company and AIO President steered the banquet festivities with great sensitivity. His faith in convention chairman Stephen Spake, of the Lincoln Pipe Organ Company, was a mark of genius. Spake carefully and lovingly steered all the matters of keeping the convention on schedule, counting heads on buses, handling Q & A sessions with a portable microphone, and constantly remaining calm, contributing to a successfully run convention. He also played an important role in the planning committee. 

One might wish that the AIO would approach matters of the performance of organ literature more seriously, but then when one thinks what organists really want to know about pipe metals, leather, how pipes are measured, etc., the argument becomes nebulous. The two professions are individual art forms with totally different schools of knowledge required. The goal is for the two to meet in agreement of making sounds that convert souls and enhance the artistic excellence that humans are capable of creating. ν

Photo credit: Harry Martenas

Grant Smalley Pipe Organs, Victoria, British Columbia (1984)

Born in Sidney, near Victoria B.C., Grant Smalley has worked as an organbuilder since 1966. He was associated with Gabriel Kney from 1968 to 1979, primarily building tracker-action organs and installing them throughout Canada and the U.S.A. During the last eight of those years he assumed Kney's tuning and maintenance business in addition to his organbuilding duties. He returned to Victoria in 1980 and established his own business four years later, buying out the organ maintenance service of Hugo Spilker, who had done restorations in the area. His associate, Douglas Adams, received formal training in instrumentation and systems technology, and manufacturing engineering technology; in addition to assisting in the construction of the new shop, he is responsible for electrical design, construction, and mechanical work. Beverly Smalley, the wife of Grant Smalley, handles the business and financial operations. All three are active participants in community choral groups.

Grant Smalley has built several small organs: a four-stop positiv organ, mechanical action (1985); a four-stop, portable, continuo organ with 56-note transposing keyboard, mechanical action (1989); and two continuo organs of 31/2 and 41/2 ranks, both with mechanical action (1995, 1997). The major activity, however, is organ restoration, along with regular tuning and routine maintenance work: about 50 organs throughout Vancouver Island and Greater Vancouver. A number of heritage organs in Victoria, including several instruments built by Casavant Frères in the early 1900s, and others by English and American makers, have received extensive overhauls in recent years.

Wooden pipes, most windchests, consoles, and casework are built in the shop; metal pipes are ordered to specifications and voiced there. Other components acquired from suppliers include keyboards, drawknobs, switching systems, and blowers.

Blair Batty & Associates, Simcoe, Ontario (1985)

Blair Batty was born in Simcoe, and as a teenage organ player he acquired an interest in the mechanical workings of organs. His organbuilding career began with the Keates Organ Company, Acton, Ontario, where he learned windchest construction, wiring, tuning, and installation procedures. In 1976 he moved to Europe, where he learned the craft of metal pipemaking with Jacques Stin-

kens, Zeist, Holland, and the art of reed manufacturing with Carl Giesecke & Sohn, Göttingen, West Germany. During that period he travelled extensively throughout Europe to study examples of French, German, and Dutch organbuilding. In 1977 he went to Gloucester, Massachusetts, to join C. B. Fisk as a pipemaker and draftsman, then in 1979 he was invited to head the pipe shop of the Noack Organ Company, Georgetown, Massachusetts. In 1981 he returned to Canada to work for Brunzema Organs, Fergus, Ontario, then returned to Simcoe in 1985 to establish his own firm. Since then he has visited England on several occasions to study the instruments of Willis and Hill.

The company has built three new organs. One is a two-manual, 27-stop instrument of eclectic design incorporating Schnitger-inspired choruses, a French-character trumpet, and Dutch/French-style Swell mutations, with console-equipped MIDI (1991). Another is a two-manual, 19-stop instrument of British-inspired design in which the basic choruses follow William Hill, but includes a Schnitger-style trumpet, a cornet and mutations of classical French design, and string stops scaled and voiced on Cavaillé-Coll principles (1993). A four-rank box organ was built for a private customer.

The company specializes in restoring and rebuilding older organs, employing the techniques and materials of the original builder as far as possible, and provides tuning and maintenance service to about 100 churches annually throughout southwestern Ontario. Most of the components of organs are produced in the factory: Pitman and slider windchests, bellows, rollerboards, tremulants, keyboards and pedalboards, and consoles. Pipes, both wooden and metal (including reeds), are generally made on the premises; the metal pipeshop and foundry section has a 12-foot, polished granite casting table, one of the few in Canada. Blowers and electrical combination and switching actions are acquired from external suppliers. The firm also provides services, parts, and pipes to other builders and tuners. A large reference library of historical and current organ design data, including pipe scalings of hundreds of historic organs, is maintained. A computer-assisted design (CAD) system is used. The firm had three full-time employees and several part-time helpers in 1998.

Gober Organs, Toronto, Ontario (1985)

Halbert Gober was born in Austin, Texas, and began his organbuilding career with Otto Hofmann (1969-1972), an organbuilder in Austin known as an early proponent of the tracker revival. Following university studies in liberal arts and architecture, he lived in Germany from 1972 to 1980. During the first four years he studied music, architecture, and organbuilding; in the remaining years he was employed with various organbuilders, including Rensch in Lauffen-am-Neckar (1972); Jann (1977-1980), where he completed his formal apprenticeship in 1979; and Felsberg in Chur, Switzerland. Following his move to Canada in 1981 he was employed as a voicer with Karl Wilhelm until 1985, before opening his own shop in the Montréal area in that year. From there he served as a freelance voicer and pipemaker for several organbuilders in North America and Europe.

He established his own shop in Toronto in 1991, where he commenced building tracker-action organs. Output to date amounts to six two-manual instruments of medium or small size; the most recent of these is a five-stop studio organ for the University of Notre Dame, South Bend, Indiana. Rebuilds and tonal revision projects are also undertaken. His philosophy is to draw on the full heritage of historical organbuilding in the construction of cohesive and logical instruments, with equal priority to dependability and musicality.

Wooden pipes, along with metal pipes made of cast and hammered lead, are manufactured on the premises. Reed pipes, including shallots, are also made in the shop. Action parts are from Germany. There were three employees in 1998. 

Pole & Kingham, Chatham, Ontario (1985)

 Donald Pole and Ron Kingham founded their company in 1979 and then incorporated in 1985, when the construction of complete new organs commenced. Earlier, between 1966 and 1968, Ron Kingham had been an employee of John Bright, a co-founder with Gabriel Kney of the Kney & Bright Organ Company in 1955; he built a house organ under John Bright's supervision. In the first five years of their association, the partners' work was limited to tuning, repairs, cleaning, and general maintenance.

Since 1985 they have built and installed seven new electrical-action instruments (two incorporating some older parts), mostly of medium-size, all in Ontario churches; two other instruments were provided to churches in Michigan, U.S.A. While their instruments are designed to meet both liturgical and performance needs, recent organs have a Romantic bias, and the Symphonic era is recalled in a new, three-manual, 36-stop instrument (the largest to date), with its six-rank String Organ division, installed in Holy Trinity Anglican Church, in Chatham, Ontario, in 1997. Other services include restoration of both tracker- and pneumatic-action organs, rebuilding with solid-state switching, enlargement, and tonal additions, along with general maintenance and tuning.

Wooden pipes (Bourdon, Chimney Flute, Gedeckt, and Doppelflute--the latter scaled after a fine Karn stop), windchests and reservoirs, and consoles are made in the shop; metal pipes are obtained from suppliers in Canada, U.S.A., Germany, and Holland. Five employees worked with the partners in 1998.

Juget-Sinclair, Montréal, Québec (1994)

Denis Juget, a native of the Savoy region of France, received his diploma in fine cabinetmaking in Annency, Haute-Savoy, France, in 1979, then worked as an apprentice with leading organbuilders on both sides of the Atlantic, with whom he acquired skills in all phases of organbuilding: Lucien Simon, Lyon, France (1979-1983); Robert Chauvin, Dax, France (1983-

1985); Wolff & Associés, Laval, Québec, upon his arrival in Canada (1985-1991); Orgelbau Goll, Lucerne, Switzerland (1990-1991); Orgelbau Rohlf, Seitzental, Germany (1992-1994); and Karl Wilhelm, Mont Saint-Hilaire, Québec (1992-1994). Special assignments be-tween 1988 and 1990 involved the restoration, renovation, and voicing of several organs in Austria, Italy, and Spain. His organbuilding enterprise began in 1994 in Saint-Basile-le-Grand, Québec, in a backyard, two-story, former chicken coop, which was converted into a workshop. In the following year he completed a two-manual, 3-stop house organ for a private client.

Following studies in science at McGill University in Montréal, Stephen Sinclair worked first as an apprentice cabinetmaker, then as an apprentice organbuilder with Wolff & Associés (1989-1991). He received practical working experience in general organbuilding and reed-stop restoration with Manufacture d'orgues Franc-comptoise, Courtefontaine, France (1995, 1997); pipemaking with Georges Blaison, France (1996) and N. P. Mander, London, England (1997); and general organbuilding, design, voicing, maintenance, and tuning with Wolff & Associés (1992-1998). He joined Denis Juget as an equal associate in 1998.

The company divides its time between the restoration of historic instruments and the construction of small mechanical-action organs. Since 1995 five two-manual, 3-stop, house organs and one continuo organ have been manufactured; three of the house organs for clients in the United States. Works in progress include two similar house organs for destinations in Québec and Germany, and a two-manual, 10-stop practice organ for the University of Cincinnati, ready in 1999. The house organs incorporate a design by Denis Juget that enables them to be moved relatively easily without breaking down the action.

All parts are made in-house, including wooden and metal pipes, wind chests, bellows, rollerboards, keyboards and pedalboards, drawknobs, and casework (hand-planed in solid wood, using mortise-and-tenon construction). Blowers are purchased from Laukhuff, Germany. Several part-time workers assist in various stages of production and installation. Following relocation in late 1998 to an industrial space with 30-foot cathedral ceilings in Montréal, the associates intend to make the leap from building practice instruments to full-fledged church organs in the near future.

D. Leslie Smith, Fergus, Ontario (1996)

Leslie Smith grew up in southern Alberta, and acquired his interest in music at an early age through involvement in church choirs and piano lessons. He developed an early fascination with organ building and enrolled in organ performance studies at the University of Calgary after completing high school. Using practical skills acquired from his father, who was a carpenter and mechanic, he completed several kits for harpsichords and clavichords, and established an association with a local organ serviceman who introduced him to the techniques of maintaining and tuning electro-pneumatic instruments. In 1973 he moved to London, Ontario, to continue his organ studies at the University of Western Ontario. While in that city, he became acquainted with Gabriel Kney, in whose organbuilding shop he worked on a part-time basis for several years. In 1982 he joined Brunzema Organs in Fergus, Ontario, where he remained for 10 years as a journeyman organbuilder. After the death of Gerhard Brunzema in 1992 and the closing of his organbuilding operation, Leslie Smith worked as an independent contractor in pipemaking and voicing on a number of projects in Canada and the United States. His first organ, a two-manual, 11-stop studio organ was undertaken in 1982 as a part-time project while working with Gerhard Brunzema; it was completed in 1992.

In 1996 he established his new workshop on part of the former Brunzema premises. In the same year he produced his first commission, a one-manual, 6-stop, mechanical-action organ, for a cemetery chapel in Montréal. A similar organ, but without pedals, was supplied to a church in Kansas City, Missouri. Although eclectic and innovative in terms of tonal and visual design, Leslie Smith's approach is inspired by the work of mid-19th-century Canadian and American firms such as S. R. Warren of Montréal and Hook & Hastings of Boston, favoring generous scaling and higher pressures.

Wooden pipes for these two instruments were made in-house, but metal pipes were supplied by F. J. Rogers, Leeds, England. Blowers came from Laukhuff, Germany. Keyboards, and key and stop action were fabricated in the shop. Stops are divided into bass and treble, using a special form of drawstop mechanism developed by the builder. Cases are made from common hardwoods, using traditional construction techniques.

Maintenance work to organs of all makes and construction in Ontario and Québec comprises a significant part of his activity; in 1996 he was appointed curator of the largest pipe organ in Montréal, a four-manual, 86-stop Casavant instrument (installed in 1932, rebuilt in 1992 by another firm) at the Church of St. Andrew and St. Paul, and will soon undertake complete rebuilding projects, as well.

The Future of Organbuilding

The status of organbuilding in the 21st century is not easy to predict, given the variety of factors involved. Generalizations about the number of future organ installations are risky; nevertheless, it is interesting to note that, within roughly the last three decades, while the annual production of instruments of all sizes peaked several times in the 1980s, the low periods of the 1970s were again matched in the years since 1994. Whether this recession will continue in the coming years is uncertain, but some recent trends provide clues to a possible future.13

The fact that few new organs have been installed in Canadian locations in recent years is not surprising, for the distinguishing characteristics of the "golden age" of the organ in the early years of the twentieth century--in terms of the erection of new church buildings, the proliferation of organbuilding firms that supplied both churches and motion picture theaters with instruments, and public enthusiasm for organ recitals played by local and touring recitalists--are not likely to be repeated, considering shifting cultural values along with the various musical and other forms of entertainment now available.

Although most organbuilders have confined their operations to meeting only local and regional needs, several Canadian firms have cultivated the international market with apparent success. The services of the Canadian Commercial Corporation, a crown corporation of the Government of Canada that assumes the role of prime contractor and subcontracts all of the contract back to the Canadian firm, are available for companies seeking worldwide clients.

As for the tonal design of new instruments, the uneasy hybrid designs of earlier years largely have been abandoned in preference to the rediscovered qualities of universally admired older instruments of the 17th and 18th centuries, without blindly copying them. Although instruments of neoclassical design, with their historically "authentic" stoplists, are not entirely suitable for the performance of all schools of organ music, they are probably more versatile than the earlier generation of organs for general liturgical and performance purposes. On the other hand, some organbuilders prefer an eclectic approach, a matter that is subject to ongoing debate.14 The recent strong demand for mechanical-action instruments may eventually stabilize, for reasons relating to architecture, economics, changing musical tastes, and a return to the Romantic idiom in repertoire. Purchasers may prefer some of the advantages of nonmechanical instruments, such as the consistent keyboard touch and flexible console location provided by electric action.15

Much of the earlier activity of new organ construction has been redirected to rebuilding and restoring older instruments, some of historical significance. Most Canadian organbuilders engage in this growing activity, which can provide churches with a cost-effective alternative to the purchase of a comparable new instrument. Routine maintenance work is also part of the service provided by many firms, large and small.

Pipe organs have always been expensive, so electronic instruments utilizing highly developed digital technology now provide an economic alternative for church congregations lacking the will or the means to acquire and maintain a pipe organ. The respective merits of pipe organs and electronic instruments have been debated since the latter were first introduced. Nevertheless, there is an obvious answer, based on musical criteria, to the question, Which is preferable: a poorly designed, badly maintained pipe organ, or a high quality electronic instrument? Electronic instruments have a place in locations where pipe organs are out of the question, whether for space or budgetary considerations. They have proved adequate for the liturgical requirements of many small or medium-size churches with limited budgets, and these instruments have provided competition for more costly pipe organs. The increasing acceptance of electronic instruments further diminishes the probability of a significant number of new pipe organ installations in the coming years. On the other hand, educational institutions (those that are not financially beleaguered, if any) and affluent congregations of some churches (not necessarily the largest) undoubtedly will continue to prefer pipe organs for musical, historical, or social reasons, and such instruments can be supplied only by the larger, well-established, organbuilding companies.

The role of the organist is of considerable importance in ensuring a future for organbuilding. If a church considering the purchase of a new organ already has a fully trained organist, this person, working with a musically educated and supportive committee, can influence the decision in favor of a pipe organ in preference to an electronic instrument, providing that a realistic fund-raising objective can be achieved. A church with an adequate pipe organ will seek a highly trained individual to play it, and such organists ordinarily prefer appointments to churches with pipe organs; once hired, their presence encourages the continuation of the pipe organ tradition.

Changes in the liturgical practices of some religious denominations may have a subtle, long-term effect on the future of organbuilding. The emergence in some congregations of youth-segregated services, with their unique liturgical practices that employ guitars or other instruments associated with folk music or religious rock groups, may produce a generation of worshippers unfamiliar with the organ, its musical heritage, and its literature. A broader associated issue is the question of the future of institutionalized religion and its possible decline due to the growth of science, education, and secularization, or its theological transformation into various manifestations of individualistic spiritual development. These possibilities undoubtedly will take many years, perhaps centuries, to resolve.      

Shifts in population characteristics introduce another factor into the question of the future of organbuilding. Some suburban churches located in stable neighborhoods now have congregations comprised largely of aging members living on limited incomes, not offset by significant numbers of younger, fully employed members. If the present job of organ maintenance is difficult for such congregations, even with skilled volunteer labor working under the supervision of a trained organ technician, the acquisition of a new instrument is beyond consideration; in fact, the amalgamation or dispersal of these congregations is the more likely scenario. The inevitable result would be the closing of some church buildings, along with the possible removal or relocation of existing pipe organs. The more affluent churches with a wider spread of ages among their members, and which encourage the full participation of younger members in their musical programs, are the only ones that will escape this fate, thus leaving open the possibility of the purchase of a new organ in the distant future. A related consideration, which provides a cause for optimism, is grounded in the speculation that recent declines in per capita real income may stimulate group activities at the expense of individual life styles, and that churches may again become a center of social as well as spiritual activities. In such contexts the pipe organ, as a cultural, religious, and artistic centerpiece, may serve as a source of pride and inspiration, and as a vehicle for the renewal of congregations.16

Over the longer term, increased public awareness, combined with both formal and informal educational opportunities, may contribute to the sustained vitality of the organ culture generally, including organbuilding. Radio broadcasts of organ recordings, instructive television programs, increased concert programming for organ and other instruments, and the development of audiences for subscription series of organ recitals, would increase knowledge of the organ among the general public. In the educational system, in-service sessions on the organ for school music teachers, the preparation of classroom learning materials for use in regular music instruction courses, and the participation of students in on-site inspection trips and demonstrations would provide practical contexts for raising awareness of the organ at a level that students can understand and enjoy.17 As for organists, competitions or commissions for hymn arrangements, sacred songs, or new compositions for the organ could be fostered on both the regional and national levels by the Royal Canadian College of Organists. These informational and educational programs would contribute to the development and maintenance of an appreciative audience for the organ throughout the coming decades. Such forms of revitalization would ensure the future of the King of Instruments well into the 21st century.

REFERENCES

                        13.              Some of the following material is adapted from the chapter, "The Future of the Organ," in Hartman, The Organ in Manitoba (note 5 above).

                        14.              See Quentin Regestein and Lois Regestein, "The 'Right' Organ," The Diapason, August 1998, 13-16; September 1998, 17-18. Radically opposing points of view debate the legitimacy of a "universal" hybrid organ, one that is perfect for everything.

                        15.              R. E. Colberd, "Pipe Organ Building: the Nineties and Beyond," The Diapason, July 1994, 12.

                        16.              Ibid., 14.

                        17.              For a description of a recent educational event for school children, see Valerie L. Hall, "Meet the King of Instruments: A Successful Workshop Model for Kids," Organ Canada, July 1998, 9.