John E. Sperling: Tonal Director Emeritus, Wicks Organ Company

Wicks Organ Company, Highland, Illinois

First Congregational Church, Kalamazoo, Michigan, Opus 6419 From the spectacular display of floral color found at the annual Tulip Festival in Holland, to the ingenuity of the great Christopher Columbus Smith as he launched the first-ever Chris-Craft speedboat, Western Michigan has provided us with a rich cultural, artistic, and recreational history. Kalamazoo is no exception to this trend; in fact, when it comes to the presence and popularity of the pipe organ, Kalamazoo reigns as a leader.

When I first went to First Congregational Church in the year 2001, I was told that the new organ would be in the company of a host of large, new instruments. Moreover, I learned that these new organs were within walking distance of one another! The Congregational church’s organ would share turf with two instruments by Létourneau (one in the Methodist church and one in the Baptist church), two older Casavants (one in the Christian Science church and one in the Presbyterian church), a newer Dobson in the Episcopal church, a Kilgen in the Reformed church, and, of course, the soon to arrive Nichols & Simpson in St. Augustine’s Cathedral. Having so many intriguing, contrasting organs in such a small area is a true gift to the organ enthusiast and an invaluable tool to the deliberating organ committee. It was from this impressive list of instruments that the committee of First Congregational Church began to study.

The organ committee instructed the bidding builders to propose something special: something unique that would complement rather than duplicate the other instruments on the block. However, they were not yet sure of the actual style they desired. Even though several of the other organs on the square provide an interesting spectrum of tonal styles, representing varying degrees and spins upon the American-classic school of tonal design, they were not sure whether they wanted to venture too far from this tried and true “comfort zone.” Nevertheless, the Wicks team took a leap of faith and proposed an instrument of the firm’s so-called “Neo-Victorian” style—the first ever to be proposed in this region of the country. After many months of deliberation and soul searching, First Congregational Church selected the Wicks proposal; and, they too took a leap of faith with regards to this “new” Wicks style of tonal design, voicing, and construction.

The Wicks “Neo-Victorian” sound

The Wicks Organ Company of Highland, Illinois, has ventured into an exciting realm of tone, unknown by the firm or its customers for some fifty years. Indeed, this somewhat unique style is little known in most organ circles. Furthermore, it is rather shocking for most musicians to find out that Wicks is now building high-pressure organs, utilizing stops and tonal palettes that have not been typically associated with the firm.

The “Neo-Victorian” label is not one of our own making. Credit for this somewhat curious name of the new style must be given to the Wicks North Texas area sales director John Dill. When he played the first Diapason chorus on our display organ, Opus 6295 from 2002 (which still stands in shop’s erecting room), he coined this term, which I believe to be quite apropos on many levels. What he experienced was new for him, even as an experienced American organ man. He is among the many folk who, when they hear the description of “Victorian” applied to an American-made organ of the early 20th century, conjure up less-than-savory images to describe the sound. We have all been told in our organ studios that most Victorian organs have certain universal traits. Most of these traits have been described with words and phrases that we have all heard: “it’s so muddy,” “it just can’t articulate repeated notes in the texture,” “the action is so clumsy,” “this thing is so treble deficient,” “it’s tubby,” “it’s contrapuntally challenged and I cannot hear the voice leading at all,” “it is lacking in a solid classic chorus up through mixture,” and yes, I have even heard this one: “it’s so frumpy!”

So what makes Wicks Opus 6419 at Kalamazoo’s First Congregational Church “Neo” instead of “old-school” Victorian? Well, it is truly a long story, one that has been about 100 years in the making for the Wicks Organ Company! It is important to remember that Wicks has been around for more than 100 years. The firm has dabbled in virtually every 20th-century stylistic trend of American organbuilding. The first truly “solid” Wicks style came about in the 1930s with the arrival of Henry Vincent Willis on American soil. The 1950s stood as a transitional phase in which Wicks struggled with the arrival of the “American Classic style” from companies in parts east. The 1960s saw the dawn of the style most commonly associated with Wicks, the low-pressure, open-toe voicing era. And from the late 1970s through the beginning of the 2000s, Wicks has dabbled in various degrees of “American Classicism.”
Henry Vincent Willis was the son of Vincent Willis, the “other brother” who made up the “Willis II” era of the Willis firm in England. He came to Wicks with much the same knowledge and voicing skills that would have been utilized in creating some of England’s largest Willis masterpieces. Most of the American “Willis Wicks” organs, however, took on a slightly different role than their English, Anglican-inspired sisters.

In the days before Vatican II, many Roman Catholic churches in the U.S. commissioned either Kilgen or Wicks organs. Both were Roman Catholic companies, and both were experienced in building organs for the tradition. As a result, a majority of these Wicks organs were designed for the pre-Vatican II liturgy. They provided “Holy Hush” for the mystical parts of the liturgy, choral accompaniment for the singing of plainsong and other Mass ordinaries, and improvisation during the receiving of Communion. As a result, such organs were resplendent with silvery undulating stops, warm and subtle accompanimental flutes, full and luscious Willis-voiced diapasons, and powerful, yet accompanimental Willis-voiced chorus reeds.

Larger instruments had some of the more fanciful stops like the 4¢ Magic Flute, the Silvestrina II, the French Horn, or the Orchestral Oboe, all of which were very “English Willis-like” in nature. Although choruses were very “singing” and quite contrapuntally clear, very rarely, except in the largest of organs, would there be more than one independent stop of 2¢ pitch. In the same spirit, mixtures were usually not even a whimsical thought for a designer of these organs, with the exception of the Dulciana-scaled Harmonia Aetheria!

By and large, however, these organs make up one of the most uncelebrated chapters of American organbuilding history. Most of them are still in decent working order (thanks to those famous leather-free Direct-Electric® units!), and they deserve greater recognition from organ historians and appreciators, as they are quite remarkable. Certainly, they have provided the present-day Wicks Organ Company with living examples of good Victorian work, which we have studied with high-powered microscopes.

Wicks responded to the arrival of the Classic revival in American organ building, in a full-throttle manner beginning in 1965. Almost all of the scaling and pipe-making/voicing techniques of the past were set aside in order to embrace what customers were demanding. Often, instruments could reach the 10–15 rank mark without having a single 8' Open in the manuals. Languids and lower lips were left unscathed by the ravages of the nicking knife, and regulation was accomplished at the lower lip of most metal pipes. Gone were the Sylvestrinas and Salicionals, VDO’s, Clarinets, and French Horns in favor of Gemshorns, Schalmeis, Barpfeifen, and other neo-classically inspired sounds. All this was done, of course, as an answer to the demands of the times. People were demanding clear, contrapuntally precise choruses inspired by the notion of the Werkprinzip.

The company indeed answered the call. My predecessor, John Sperling, designed, voiced and finished several of the most elegant neo-classic-style organs to be found anywhere. In fact, he has just spearheaded the restoration, re-installation and revoicing of this era’s magnum opus, which has been provided for Mary, Mother of Hope Catholic Church in New Castle, Pennsylvania. I fear that this and other notable organs of this vintage are also unduly ignored by the organ public. However, the pres-ent tonal administration has learned a great deal from the importance that was placed on chorus building and contrapuntal clarity in this vintage of Wicks.

From the organs of the 1930s–1940s, the Neo-Victorian Wicks Opus 6419 rediscovers and celebrates the beauty of the individual stop. Nevertheless, from the organs of the 1960s and 1970s, the Neo-Victorian Wicks upholds the importance of clarity in ensembles in performing horizontal musical textures. Indeed, in Opus 6419, one can draw any one stop of unison pitch and be satisfied for hours just playing upon it alone. Not only will the stop’s individual timbre inspire with a singular beauty of tone, but the player will be amazed that something so rich will allow his choir or congregation to clearly identify every voice in a four-part texture! Furthermore, the musician can come out in the organist when he or she sits at the console of Opus 6419, for the stops are a sonic painter’s palette. Every voice is designed to work well in ensemble with what seems to be an endless array of other voices in combination.

Back again are the full, rich, yet contrapuntally clear Diapasons (of which this organ possesses six of 8' pitch!). Some familiar 1930s flutes, like the Melodia and the Transverse Flute, as well as favorite strings, like the 16' Violone and the 8' Violoncello, also have resurfaced. We seized the distinct opportunity of working with select ranks of 1920s pipework that were still present in the church’s 1920s/1970s Austin organ. The strings of the Swell and the Choir were restored to their 1920s glory—they stand as a testimony to the enduring legacy of Austin Organs, Inc. The new chorus reeds certainly show a 1930s influence with their powerful, yet accompanimental/blending characters. The color stops like the Magic Flute, English Horn, Harmonic Flute, Bassett Horn, and Oboe recall the great sounds of the symphonic-style organ, but they can also serve as clever coloration for the creative ensemble-building, orchestral-minded musician. The Great Tromba towers over the full ensemble in a firm, powerful, yet non-abrasive manner. The 32' Double Trombone, voiced on 15" of wind with its pocketed teardrop shallots undergirds the entire organ with a fundamentally powerful rumble rather than a “jack hammer.” And last, but certainly not least, the 20" wind-pressure Subterranean Tuba, a stop located in the basement and speaking up through the floor behind expression shades, truly envelops the listener with a firm sonic thrill rather than piercing him with a strident “laser beam” of sound.

Sometimes a leap of faith is a scary proposition, and the Wicks Organ Company team always will be grateful to the kind people of First Congregational Church for taking the plunge and entrusting us with this exciting commission. The church and the firm built an initial trust that allowed Wicks to build an organ in the new tonal style. The organist, Mrs. Helene S. Stuurwold, understood the tonal vision for the organ, recognized the vastly expanded musical parameters the organ would offer, and therefore embraced the project wholeheartedly.

The organ committee did the church and the firm a great service by appointing one of their own, Charles Krenick, as the liaison between the church and the company. Charlie was most helpful in coordinating the building plans with the arrival of the organ. He also did so much to ensure that our installation crew did not run into any hurdles.

Many thanks must also be given to the Michigan area Wicks director, Larry Boekeloo. Larry was an invaluable resource to both the church and the firm, spending many weeks with Helene and members of the committee to ensure the proposal was well understood. He was also available at the drop of a hat to get little details for our design team, and he spent countless hours on site with the installation crew from the factory assisting with much of the initial installation.

Finally, credit must be given to the “A-Team,” the factory installation crew who worked for many months on site. Jack Haase, chief installer; Mae Knaebel, Robert Stoker, and Steve Thompson labored for three months installing this instrument. Furthermore, they worked to make some important onsite mechanical upgrades to the instrument, making it even better and more serviceable. The installers also worked for two weeks with the tonal finishers to help lift some very tall pipes as fine adjustments were made.

The tonal finishing and final voicing was then accomplished by Mark Scholtz and me over four weeks in January 2005. A spectacular flue voicer and a first-rate organist, Mark was, nevertheless, new to the world of tonal finishing. However, during this “initiation by fire” he has become quite skilled at the art of fine adjustment and balancing of sounds. I am certain that Mark’s tenure at Wicks will be one characterized by the finest, most musically finished instruments in the company’s history. The resulting organ stands as a masterpiece in that everyone, the 60 craftsmen and women at Wicks, as well as the committee and congregation of First Congregational Church, believed in the dream. The leap of faith has landed with success.

—Bill Hamner

Tonal Director (2002–2006)

From the church

It is never easy to bid farewell to an old friend, but that was the situation facing the congregation of First Congregational Church in the late 1990s. The church’s venerable 1928 Austin organ was showing grave signs of trouble, most stemming from several “modernization” attempts in the late 1960s. Such was the love of the congregation for their beloved Austin that every possible avenue to save and rebuild it was thoroughly examined. Finally, the sad fact had to be faced that very little of the original pipework was left after the modernization attempts. Our very capable councilor, Jonathan Tuuk, helped us realize that the best stewardship would be to purchase a new pipe organ.

Thus began the long, arduous process of selecting an organbuilder. Mr. Tuuk was an invaluable help to the committee with his extensive organ knowledge, hard work, and never-failing optimism. The committee listened, learned, debated, and finally selected the Wicks Organ Company of Highland, Illinois, to build the new organ. The Wicks firm was chosen for several reasons: their willingness to listen to our needs and desires, their high-quality product, their longevity in the organbuilding business, and their talented and dedicated craftspeople.

The committee felt strongly that they wanted their instrument to be all pipe with no digital sounds, and Wicks was up to the challenge. Wicks representative Larry Boekeloo and Wicks tonal director Bill Hamner determined that eight ranks still remaining from the 1928 Austin could be refurbished and reused in Wicks Opus 6419. Wicks craftspeople also spent extra effort to rebuild the original 61-note Austin harp because it had special meaning to the congregation. Exciting stoplists were prepared, revised, and reworked until everything seemed in good balance, both tonally and financially. Then, we waited.
When the organist played the first chords on the new Wicks Opus 6419 set up in the factory, tears sprang to her eyes: it was better than she had hoped for. That first impression has proven true as luscious sounds fill the sanctuary Sunday after Sunday. The congregation is delighted, the organist is thrilled, and the hymn singing is more energetic than ever before. We look forward to many years of exciting exploration of Wicks Opus 6419.

•
The Wicks Organ Company will be taking attendees of the 2006 AGO national convention in Chicago to visit this instrument on Tuesday July 4. A bus will be leaving from Chicago at 8:00 am. A lunch will be provided, and the bus will be back in Chicago for the evening events. To reserve your space on this bus, please contact the Wicks offices by calling 877/654-2191, or using the contact form at .



Cover photo by Wicks Organ Company; shop photos by Brent Johnson.

GREAT

16' Violone

8' First Open Diapason

8' Second Open Diapason

8' Violoncello

8' Bourdon

8' Harmonic Flute

4' Principal

4' Night Horn

4' Flute Octaviante

22?3' Twelfth

2' Fifteenth

V Full Mixture

8' Tromba (Ch)

Tremolo

Chimes

8' Subterranean Tuba (Echo)


SWELL (enclosed)

16' Minor Bourdon

8' Horn Diapason

8' Stopped Diapason

8' Viola*

8' Viola Celeste TC*

4' Octave Diapason

4' Transverse Flute

22?3' Flute Twelfth

2' Harmonic Piccolo

V Chorus Mixture

16' Waldhorn

8' Cornopean

8' Oboe

8' Vox Humana

4' Clarion

Tremolo

8' Subterranean Tuba (Echo)


CHOIR (enclosed)

8' Violin Diapason

8' Melodia

8' Muted Viol*

8' Viol Celeste TC*

4' Octave

4' Magic Flute

22?3' Gemshorn Twelfth

2' Tapered Fifteenth

2' Recorder

13?5' Seventeenth

8' Trumpet*

8' Basset Horn

8' English Horn

8' Tromba

8' Subterranean Tuba (Echo)

Tremolo

Harp

Celesta


ECHO (enclosed, floating)

8' Open Diapason*

8' Chimney Flute*

4' Octave Diapason

4' Flute

Tremolo

8' Subterranean Tuba


PEDAL

32' Acoustic Bass

16' Major Bass

16' Violone (Gt)

16' Bourdon

16' Minor Bourdon (Sw)

8' Principal

8' Violoncello (Gt)

8' Stopped Flute (Gt)

4' Fifteenth

32' Double Trombone

16' Trombone

16' Waldhorn (Sw)

8' Subterranean Tuba (Echo)

8' Tromba (Ch)

8' Trumpet (Ch)

4' Tromba Clarion (Ch)

4' English Horn (Ch)

Chimes (Gt)



* Reused pipework from original 1928 Austin organ



Couplers

Sw/Gt 16-8-4

Ch/Gt 16-8-4

Echo/Gt

Echo/Sw

Sw/Ch 16-8-4

Gt/Gt 16-UO-4

Sw/Sw 16-UO-4

Ch/Ch 16-UO-4

Echo/Echo 16-4

Sw/Ped 8-4

Ch/Ped 8-4

Echo/Ped 8-4

R. E. Coleberd

R. E. Coleberd, an economist and retired petroleum industry executive, is a contributing editor of The Diapason. He is a director of The Reuter Organ Company.

Introduction

In the following narrative, the interaction of an organist and an organbuilder in the design of a new instrument and selection of a builder is described in some detail by each of them. The organist, Jerome Meachen, an Oberlin and Union graduate, was organist/choirmaster of St. John’s Episcopal Church in Waterbury, Connecticut. In 1957 St. John’s, upon the recommendation of Meachen, acquired a 70-rank, three-manual McManis organ. It was followed, when he changed positions, by a 67-rank, three-manual at Redeemer Episcopal Church in Sarasota, Florida (completed in 1966), and in 1973, by a 49-rank, three-manual for Manatee Community College, Bradenton, Florida. The builder, Charles McManis, a trained organist who had apprenticed briefly with Walter Holtkamp before World War II, operated a small shop in Kansas City, Kansas. His skill in flue voicing would become widely recognized and acclaimed in a sixty-year career, which counted more than 125 new instruments and rebuilds.

The discussion highlights the steps in the evolution of their tonal philosophy. It was a process of listening, comparing and choosing sounds and stops in the quest for authenticity in the revolutionary epoch that characterized American organbuilding in the decades following World War II. Before their first meeting, Meachen had acquired a preference for non-legato playing while McManis had been taught the legato style. Despite this difference, the two men found common ground in their admiration and profound respect for the tonal work of William A. Johnson, a legendary nineteenth-century New England tracker builder, and his successors.

Background

The choice of a relatively unknown independent builder in 1956 was decidedly the exception for this era. In the 1950s, pipe organ building in America was the province of the integrated major builders who had controlled the market for new instruments since the turn of the century. M. P. Möller of Hagerstown, Maryland, the “General Motors” of the industry, with a force of more than 400 workers, delivered 365 instruments in 1928 and in the decade 1950-60, with perhaps 200 employees, built 125 organs per year.1 Other builders, those who had survived the drastic shakeout during the Great Depression of the 1930s, were likewise busy, with comparatively large work forces and lengthy backlogs.

In retrospect we might safely say the 1950s, though a vibrant decade, marked the beginning of the end of what could be termed the “commercial” era of organbuilding in America that extended back to the 1920s and perhaps even earlier. Builders, including such highly successful businessmen as Mathias Peter Möller, concentrated almost exclusively on production to meet the enormous market demand in all venues. Company executives, sons of the founder, not musicians, were largely unfamiliar with the great literature for the organ. Sadly, they scarcely comprehended the interface between Bach, Buxtehude and other composers and the subtleties and nuances of fine voicing and finishing in building the King of Instruments. Their instruments were often quite successful in the context of a “production organ,” with uniform and consistent voicing, thanks to the skills of talented shop voicers, but, in retrospect, they were perhaps lacking in artistic statement, which can come only from meticulous tonal finishing. On small organs there was virtually no concept of tonal finishing once the instrument was installed and tuned. Only with the large “signature” instruments was time scheduled for tonal finishing, for example by John Schleigh of Möller and Herb Pratt of Aeolian-Skinner.2

Yet the organ reform movement was underway and gaining momentum, beginning with the pathfinding efforts in the 1930s of E. Power Biggs, Melville Smith, King Covell and others. The major themes are well known: lower wind pressures, smaller scales and higher pitches in flue work and the introduction of chorus in place of solo reeds. A “vertical” tonal palette emerged, featuring a full range of pitches in place of the former “horizontal” palette, dominated by stops of 8-foot pitch. These elements combined in the cohesive blending of individual voices, and the emphasis on ensemble in the building of primary and secondary choruses as reflected in the work of Walter Holtkamp and G. Donald Harrison in the North German and American Classic paradigms.

Leaders in the organist profession, highly educated, widely traveled and well-read, people like Robert Noehren and Parvin Titus, were captivated by the new sounds and ensembles which awakened them to the instrument’s rich music from antiquity. They began paying close attention to European instruments, through travel and recordings, as well as 19th-century work of notable American builders (Hook, Erben, Johnson and others). They wisely looked beyond the stoplist and listened carefully to the sound. The reintroduction of the tracker instrument, first by European builders, followed by an emerging U.S. industry of small shops, reinforced the historic and intrinsic artistic value of the King of Instruments. Steady improvement in the tone quality of the electronic instruments soon spelled the end of the commodity segment of the pipe organ market rooted in the image of an organ as a utilitarian device in support of corporate worship.3

By the end of the century it was recognized that the heart and soul of a pipe organ, a work of art, is the tonal edifice, which begins with a vision and continues through design, voicing and tonal finishing of the instrument. These requirements were most often found in the combined talents of the tonal architect and skilled, dedicated artisans in his shop, seldom in one individual. Harrison, Holtkamp and Fisk, for example, were superb designers but were not voicers. Schopp, Pearson and Zajic were supremely talented reed voicers. But once in a while one individual comprised them all. George Michel of Kimball perhaps came close and, in the author’s judgment, Charles McManis fits this image.

In any revolutionary epoch, change in an established industry comes slowly and sometimes from the outside. American organbuilders, badly shaken by the lean years of the Great Depression and World War II, were to some degree insular, isolated and ingrown. On balance they were reluctant to abandon existing practices and slow to adopt new and untried techniques with unknown consequences. Voicers, trained in-house on high-pressure, wide-scale stops of 8-foot pitch, scarcely comprehended the new generation of flues and reeds. They and their superiors had been disinterested in historic instruments, American and European, which they viewed as antiquated and obsolete. But they could not ignore the revolutionary changes around them, and some firms wisely brought in outsiders--men like Richard Piper at Austin and Franklin Mitchell at Reuter--who were listening and eager to apply their ideas to new stoplists.

At the close of World War II, the demand for organ work far exceeded the supply of qualified people. Factories enjoyed lengthy backlogs and were hard pressed to meet production schedules. Service firms comprised primarily older men, former employees of firms who had failed in the Great Depression--for example, Syl Kohler in Louisville (Pilcher) and Ben Sperbeck and Milton Stannke in Rock Island (Bennett). Honest and hard working, they can best be described as mechanics; few had either voicing experience or any concept of a modern chorus or ensemble. This afforded an opportunity for a newcomer, a young man who had listened carefully, had a firm conviction of what pipe sound should be, and had acquired the voicing skills to bring the sound of a pipe to the tone quality he desired.

Jerome Meachen writes:

A native of Oklahoma City, I studied organ with Dana Lewis Griffin, a student of David McK. Williams at St. Bartholomew’s Episcopal Church on Park Avenue in New York City, and then enrolled at Oberlin College where my teachers were Leo Holden and Grigg Fountain. Holden was a 19th-century organ teacher--Rheinberger, romantic, and very happy with the E. M. Skinner organ in the chapel. His whole approach to organ playing was: “write down the fingering I give you and the registration I want you to use.” It was a very dry--and I felt antiquated--approach. In contrast, Fountain said: “select your own registration from what you hear, we will discuss it and you defend it.” This was essential to broadening my understanding of organ music and what I wanted to develop in my own touch on the instrument. While at Oberlin I practiced on the Johnson organ at Christ Episcopal Church in Oberlin courtesy of Arnold Blackburn, also on the Oberlin organ faculty. This awakened me to the beautiful voicing of this builder. Of course northeast Ohio was Holtkamp country. When I began studying with Fountain, my last two years, he had just obtained a Holtkamp at St. Paul’s Lutheran Church in Cleveland. While I was fascinated with the sounds of this instrument, I found it ear-shattering. I well remember one Saturday afternoon when I was practicing at St. Paul’s. Walter Holtkamp came in, climbed up on the Swell box and said play full organ. He just reveled in the volume, but I found that sort of sound excruciating.

A milestone in my career was a recital at Oberlin by Ernest White. I was fascinated by his approach, non-legato, in contrast to legato, which was the basic style at Oberlin. Legato evolved because of the acoustics organists had to deal with in American churches. Nothing happened after you took your finger off the note so you had to pull everything together.

After graduating from Oberlin I enrolled in the School of Sacred Music at Union Theological Seminary in New York City, where I arranged to study with Ernest White, then an adjunct faculty member. We shared a common interest in repertoire and liturgy. White had me listen to orchestral recordings of Mozart and commented: remember, “Bach was a violinist as well as an organist.” Bob Clark, another graduate student, and I found White way ahead of his time in non-legato sound, which broadens your understanding of the organ. This is the sound one finds in Europe and what we were striving for in America. Working with White was working with the literature and developing the capacity to do his particular style of non-legato in terms of liturgy, the Anglican approach and plainsong. This was very enlightening to me. I was fascinated by White’s approach to playing the studio organ at St. Mary the Virgin, the second studio instrument, this one by Möller. His technique was a detached sound, like the ringing of bells. Unfortunately, the voicing was so loud it was difficult to listen to. This alerted me to the distinction between intensity and decibels, a key distinction in my thinking. I was also intrigued by the design of the organ, which had a 32’ Cornet using individual stops and two Swell boxes providing two ensembles. This inspired the use of separate swell boxes and couplers for flues and reeds at St. John’s. My admiration for Johnson continued when I practiced on their instrument at the Mott Haven Dutch Reformed Church in the Bronx while at Union.4

Charles McManis writes:

As a pre-teenager in Kansas City in the 1920s, with my parents I often rode the streetcar to Independence Boulevard Christian Church to hear Sunday afternoon recitals by the legendary Hans Feil on the four-manual, 1910 Austin organ. In the 1930s while I was a student at the University of Kansas, I spent summers and holidays working with Peter E. Nielsen, a local serviceman, tuning and rebuilding pipe organs. Two of these instruments were Johnson trackers from the 1880s.5 They were especially impressive and were to influence fundamentally my concept of voicing.

Enrolling as a liberal arts major at the University of Kansas in Lawrence I became a student of University Organist Laurel Everette Anderson, an Oberlin master’s graduate who then studied for three years in Paris with Joseph Bonnet. He taught the legato method, and emphasized proper turning of phrases and making real music out of notes. He greatly expanded my knowledge of the pipe organ and emphasized nuances of color and singing quality in organ voices. Following graduation with an A.B. degree in 1936 and having already set my sights on becoming an organbuilder, I obtained a Mus.B. at KU in 1937, which required my playing an hour-long recital from memory. The thought occurred to me that I might be the first organbuilder who could play more than “Yankee Doodle” on what he had built.

I began my organbuilding career with a shop in the basement of my parents’ home. I rebuilt three organs and built one new instrument. My Opus 2, 1939--electrifying and adding nine ranks to a 1910 tubular-pneumatic Kilgen--is still playing in the Central Christian Church in Kansas City, Kansas. Then, having learned of his growing prominence in the organ reform movement, I apprenticed with Walter Holtkamp in Cleveland for a few months, eager to learn from him. I assisted with the installation of a three-manual Holtkamp organ at Olivet College in Michigan. It had Great and Positiv slider chests, but the Swell had ventil stop-action for want of sufficient space for a slider chest. When I compared the sounds of slider chest pipes and those on the ventil chest I was surprised to find that I could hear no difference. Walter’s instruments were visually well designed and beautiful to look at but, frankly, I was disappointed with his ensemble sound and tone quality. The voicing lacked a certain richness of tone. In checking Holtkamp pipes I noticed that he nicked only on the languids and not on the lower lips. As a result, pipes occasionally tended to emit an abnormal squeaking sound. He was not interested in building a truly classic organ as much as building a distinctive Holtkamp organ. In retrospect I find that I employed very few of Holtkamp’s ideas in my later work. Based on my background in music, I wasn’t hearing in his organs the sounds I wished to hear in my own instruments.

Following the attack on Pearl Harbor and the U.S. entry in World War II, I enlisted in the Army. Prior to shipment overseas my outfit was stationed at Camp Kilmer, New Jersey, for a few days. I went on pass to New York City to hear G. Donald Harrison’s new Aeolian-Skinner in the main sanctuary of St. Mary the Virgin Episcopal Church. This was my first acquaintance with mixtures and upperwork, which Laurel Anderson had talked about at KU, but which were conspicuously absent in the Austin organ in Hoch Auditorium there. Then, as a chaplain’s assistant, I was stationed in Europe where I took every opportunity to play and inspect European instruments. I remember, in particular, the famous Cavaillé-Coll instrument in the church of St. Ouen at Rouen, which inspired Guilmant’s Eighth Organ Symphony. This was the first time I had seen a five-rank mounted cornet and reeds with sunken blocks in the boots.6 After the war I returned to Kansas City, Kansas and set up shop again. On one occasion, being in New York City, I attended a recital given by Ernest White on his new Möller studio organ at the Church of St. Mary the Virgin. I left at intermission because the organ was painfully loud. In my voicing I try to make a rank of pipes only as loud as needed to ping the tone off the walls, blowing only hard enough to fill the room at the desired volume.7

Jerome: Following graduation from Union, I was appointed organist/choirmaster at St. John’s Episcopal Church in Waterbury, Connecticut. When we went looking for a new instrument to replace the 1869 Hook & Hastings, I wasn’t enamored with the sounds of Holtkamp, Möller, Schlicker and Austin, and mentioned my dilemma to my good friend Bob Clark, whose judgment I valued. He was organist at the Peddie Memorial Baptist Church in Newark, New Jersey, where my wife was soloist, having the best-paying solo position in the area, while I was at Union. He said, “Why don’t you check with Charles McManis, who builds organs that sing and don’t shout.” When I learned he was in Danbury, Connecticut, I went down to get acquainted, and we hit it off immediately.

Charles: In the early 1950s I became acquainted with Robert Noehren through our writings in The Diapason and The American Organist magazines. I worked for him on the Hill Auditorium Skinner in Ann Arbor, and built a new organ for Frankenmuth, Michigan, where he was the consultant. When he was named consultant on the Johnson at Emmanuel Lutheran Church in Danbury, Connecticut, whose organist had been his student at Michigan, I was called in. My strong feelings concerning Johnson flue pipe voicing began during my apprenticeship days in Kansas City. I discovered that diapason pipes mouth-blown very gently, then increased to full volume, had scarcely any change in pitch. Volume was regulated at the toe hole, not by opening the flue. In contrast, classical open toe voicing regulated volume at the mouth, which I found totally inadequate. I revoiced the 8-foot Principal, increasing its richness of tone, primarily by opening the toes and, to a lesser degree adjusting the mouths. Jerry and I connected as musicians, no doubt in part because I too had a degree in organ. We both agreed on what we didn’t like. I obtained the contract for the St. John’s, Waterbury, organ (see photo and stoplist) in part because Parvin Titus was the consultant. The St. John’s rector, Rev. John Youngblood, had been a curate in Cincinnati, knew Mr. Titus and trusted his judgment. Also, I had built the new instrument for the Second Church of Christ, Scientist in Dayton, where Titus also had been the consultant.

Jerome: The Johnson sound was already in my head, not only from Oberlin, but from the fine Johnson in Mott Haven Dutch Reformed Church in the Bronx, where I first practiced when I went to New York. I explained that we were looking for intensity not decibels in organ sound, colors and ensembles that sing. Charles showed me what he was doing. It was soon obvious this was just the ticket for us. These initial impressions were confirmed when my wife and I visited St. Paul’s Episcopal Church in Kansas City, Kansas, and heard for the first time a complete McManis instrument. All the voices were exquisite; the 8-foot principal was a well-supported, big baritone sound. Having worked in training choirs at an early age, striving to blend individual voices, I found in the lovely individual voices of this organ an exquisite ensemble and chorus.

Charles: When Jerry came to Kansas City, the mixtures and ensemble sounds on the Great and Swell at St. Paul’s were what really got to him. The voices together on each manual resulted in contrasting sounds but very much related. We talked at length about voicing and drew up a specification for a three-manual instrument for St. John’s. (See specification.) I also discussed what I had done in reworking old pipes and changing pitch. This was very important because in the 1869 Hook & Hastings at St. John’s a number of old ranks were reworked.

I first saw Waterbury after Meachen returned from Kansas City, and was dismayed to find dry acoustics and such terribly large scales in the Hook & Hastings. The only principal stop I could use was the 16-foot on the Great, which would work well in the Pedal division. We were able to cut down and revoice a number of 8-foot stops; for example, the 4-foot principal on the Swell had been an 8-foot violin diapason. If the scale and mouth treatment were correct, the desired sound would follow.

Let me quote from my forthcoming autobiography to explain the tonal philosophy of this instrument: “The classic Werkprinzip theory of terraced manual pitches had not yet hit the AGO cocktail hour conversation when Jerry and I drew up the design for Opus 35 (St. John’s Church Waterbury, CT) on that Sunday afternoon. Submitted to organ consultant Parvin Titus, he heartily approved of the design, but suggested inclusion of the rather outstanding Oboe from the 1869 H&H. But back to the Werkprinzip! While numerous other stops are needed in each division, the backbone is the Principal chorus, as shown below:

I:              Great     8’ Principal       11/3’      Mixture

II:            Swell    4’ Principal        2/3’       Scharf

III:          Brustwerk           2’ Principal        1/3’       Cymbel

Pedal     8’ Principal       11/3’     Mixture

For purposes of contrapuntal clarity, the Pedal chorus should be the same pitch as the Great, plus suitable 16’ underpinning. Polyphony does better without the growl of a sub-octave mixture cluster.”

After the tornado hit downtown Waterbury in July, 1989, heavily damaging the St. John’s organ, I replaced 35 ranks of pipes including replacement of the Brustwerk Singend Regal with a brass Krummhorn and substitution of a Swell 4’ Clarion for the earlier 4’ Krummhorn. Also, the 32’ extension of the Pedal reed was linked to the Posaune instead of the Contrafagotto.

Jerome: Another factor which impressed me about the McManis was its compatibility with what I call a theatre sound by which I mean, it had to dance. In the theatre organ you had a detached pedal and a strong emphasis on the melodic line when you are thinking bass line and melody. This is why I was very comfortable doing figured bases. It was non-legato; it was instrumental. When you were featuring the posthorn, you were quite willing to detach it. My father loved theatre organ, so from the time I started playing, I developed something of a theatre style. Searle Wright, the well-known organist at St. Paul’s Chapel, Columbia University, also did a great theatre style.

Charles inspired my definition of intensity because he viewed the entire instrument as a whole. In a three-manual you could draw the principal and mixture on each division, couple them together and you had a basic ensemble evoking a very intense, rich but not very loud sound because you didn’t have to fill in and thus did not have an awful lot of stops working. Thus the concept of full organ was very discriminating; the full organ piston didn’t bring on everything. You are dealing with colors and when you put everything on you end up with brown or gray. And with a tremolo on each division if you wanted to cantus firmus you could do it anywhere in the instrument.

This instrument fulfills my belief in the theological aspect of an organ. With my developing interest in liturgy I was very much aware of the person in the pew. I hold that the organ must be people-friendly, in support of congregational singing whether it be chant or hymnody. Surrounding rather than hitting the congregation with sound--making a joyful noise, not just a noise. Charles spoke of attending a recital on the Möller practice organ at St. Mary the Virgin in New York and finding it so loud he left after the first half of the program. I agree. White offered me a chance to practice on that organ but I told him I would be using only one or two stops so I might as well practice on the chapel organ. The sound was so high in decibels I couldn’t hear it.

Redeemer and Manatee

This paper has focused on the St. John’s organ. Those at Redeemer Episcopal Church and Manatee Community College continued the fundamental practices in the philosophy of McManis and Meachen. They also reflected modifications and forward thinking in their approach, as did the rebuilding and restoration of St. John’s in 1989.

At Redeemer in Florida, the former ten-rank Möller, with its subsequent addition of nineteen Aeolian-Skinner ranks, was skillfully integrated into the 67-rank new instrument. In place of the 16’ Quintaton on the Great, they chose a 16’ Gemshorn mounted on the chancel wall, extended to an 8’ Gemshorn and a 4’ tapered flute in a seamless tonal progression. The Great and Positiv exposed chests were equipped with toeboard expansion chambers to increase richness of tone.

The 49-rank Manatee Community College organ was installed in Neel Auditorium at the point of a pie-shaped building on a 35-foot shelf at the back of the stage. In an obviously “werkprinzip” layout (see photo, page 20), in a variety of shapes, it was enclosed in a mahogany case. The 16’ Pedal Principal exposed at the center hid the movement of Swell shutters behind. To its left were the lower notes of the 16’ Subbass and 16’ Posaune; to the right, the pipes of the Hooded Trumpet and more Subbass metal pipes. To the far left in the left façade was the Great 8’ Principal, and to the far right the 4’ Positiv Principal in the façade. Roofs of the façades differed but all were related to the focal point mentioned above.

The Manatee Great included a 16’ Gemshorn, all the usual 8’ and 4’ stops, plus a normal 11/3’ Mixture, a 2/3’ Acuta, and an 8’ Trumpet. The Swell mixture was a 1’ Scharf and the Positiv had a 1/3’ Cymbel. The thoroughly adequate Pedal division included a 32’ Dulzian and the usual 8’ and 4’ ranks. As would be expected, the Pedal mixture lowest pitch was 11/3’, but pipe scales were larger than those of the Great Mixture.

Summary

The above dialogue illustrates the way in which the concept of organ sound in the mind of an organist and soon-to-be builder begins with formal study of the instrument and is heavily influenced by the instructor and his experience. With this background, they are then prepared to compare and contrast a wide variety of sound in determining their own definition of it: for Meachen and McManis, a singing sound. It also argues that the ultimate test of the voicer’s art, be it Johnson or McManis, is the 8’ Diapason found on the Great, a belief shared by organists and builders for many years.

In an article in The Diapason, based upon his lecture to the AIO Convention in Pittsburgh in 1977, McManis explains the details of flue voicing and the practices of Tannenberg, Gratian, Kilgen, Hook & Hastings, Johnson, Wurlitzer, Estey (William E. Haskell), Cavaillé-Coll, and Kimball.8 This paper, now considered a classic, together with the recognition of his peers in his selection as instructor in flue voicing at a seminar of the American Institute of Organbuilders, established him, in the author’s judgment, as one of the finest flue voicers of the twentieth century.9

Charles passed away, at age 91, on December 3, 2004 in South Burlington, Vermont. Providentially, he and his wife Judith had just completed his autobiography. It contains vivid recollections of personalities and detailed descriptions of his instruments in a sixty-year career that spanned the arc of the postwar history of organbuilding in America. This priceless volume is scheduled to be published by the Organ Historical Society in 2005. It will find a prominent place on the shelf of every organist, organbuilder and organ enthusiast.

For research assistance and critical comments on drafts of this paper, the author gratefully acknowledges: Gene Bedient, Jerry Dawson, Charles Eames, Donald Gillette, Albert Neutel, Barbara Owen, Michael Quimby, Elizabeth Schmidt, Jack Sievert and R. E. Wagner.

Cover

Buzard Pipe
Organ Builders, Champaign, Illinois

Opus 29,
completed November, 2003

All Saints
Episcopal Church, Atlanta, Georgia

Some years ago I was contacted about a new organ for All Saints Episcopal
Church by the assistant organist, Jefferson McConnaughey. We seemed to be
speaking the same language concerning how we thought organs should sound, and I
was eager to meet him, music directors Ray and Elizabeth Chenault, and to visit
the church. Our conversations were put on hold while the parish called a new
rector and undertook other projects. At the time we were blessed with
commissions to build the organ at St. Paul's Episcopal Cathedral, Oklahoma
City, and large instruments for Glenview Community Church (III/71) and Holy
Family Catholic Church of Rockford, Illinois (III/56).

A few years went by, and I was invited to visit the church. Judging from the
size of the instrument under discussion, I expected to enter a huge space.
Instead, the church was more modest than vast, the acoustic more understated
than generous. At first blush, it seemed that 40 stops could have adequately
met their needs. But, no real lady ever gives up all her secrets at once, and
so I patiently looked and listened.

I listened to their former instrument while walking around the room, and
observed the acoustical phenomena under which the musicians had been laboring
for so long. The organ, although installed in the chancel in relatively close
proximity to the congregation, diminished drastically in volume in the nave. I
concluded that a part of the organ had to be installed in the body of the
church, to support singing and "pull" the sound out of the main part
of the organ installed in the chancel. Additionally, sound generated in the
nave lost its energy quickly; sound simply didn't travel well without becoming
garbled.

The musicians wanted to be able to properly register an organ to
"text-paint" Anglican Chant, choral anthems and ceremonial music in
the Anglican musical tradition. They needed a wide variety of accompanimental
tone colors at every dynamic level so that the organ could always support the
singers, even at pianissimo volume levels. It was equally important that the
organ musically render the great body of organ literature, even that of the
French Baroque school, of which Mr. McConnaughey seemed quite fond. And, the
Chenaults are duo organists; the literature which has been (and has yet to be)
commissioned for them had to be accommodated. This requires a large organ, as
coloristic stops outside the component voices for the essential choruses had to
be included and integrated into the design. Fortunately, these stops were never
in competition for space or funding, nor were our classic concepts of the
hierarchical scaling of divisions within the instrument ever compromised. Some
specific organs were studied: The Temple Church, London; King's College,
Cambridge; and St. Paul's Cathedral, London.

There is a beautiful chapel behind the Epistle side choir stalls, at 90
degrees to the axis of the church, which also serves as an overflow room on
Sundays. Worshippers there were relegated to viewing services on a small
closed-circuit TV, and could not participate in the hymn-singing because, being
outside the body of the church, they couldn't hear the organ. If the new organ
were to address and meet all the musical and acoustical requirements of the
church, then the chapel also needed to have some pipes in it, so that those
seated there could feel a part of the worshiping community.

All of these requirements were brought to bear upon a single instrument. Yes,
I agreed, this instrument has to be large--very large. Even if the room seats
only 550 souls, the musical and physical requirements dictated an organ of a
size which one might initially think out of proportion.

The position and installation of the new Main Organ was relatively
straightforward. The Great, Swell, Choir, Tuba, and Pedal would have to be
installed in the chancel, in an enlarged version of their existing chamber,
plus spaces created by cantilevering steel platforms into the chancel space on
both Epistle and Gospel sides.

The antiphonal division, a romantic Solo Organ including a Diapason Chorus
which mirrors the Great, had to be installed in the nave. But there was no
floor space for cases, no desire to see columns, and windows everywhere, many
of them signed by Louis Comfort Tiffany. By clever engineering of the diatonic
windchest layouts (which we had first used at St. Paul's Cathedral in Oklahoma
City) we were able to tuck the Solo Organ cases up in the rafters of the church
above the narthex, on either side of a central great window. By creative use of
perspective, we were able to engineer the location of the supporting steel
platforms so that they wouldn't block the view of the Tiffany windows in the
side aisles, yet give us sufficient height for the pipes inside the cases.

As conversations concerning the tonal design took shape, Ray, Elizabeth, and
Jeff fell in love with our tonal style which, while embracing eclecticism, has
its own unique personality. They visited both our large organs, and Jeff
actually played Sunday services on our Opus 7 organ at The Chapel of St. John
the Divine in my wife Linda's stead. The All Saints organ is a very logical
outgrowth of our style as practiced in our smaller organs, and as our two
larger organs have led us. The humble beginnings of Opus 7 at the Chapel, in
which we made 29 stops into a cathedral organ, can be seen all over this much
larger organ. Well-informed national and historical inspirations are
distributed throughout, so that the whole is at unity with itself. No German
Hauptwerk, French Récit or English Chair Organs for us. For example the
Great includes the mature English practice of 8' First & Second Open
Diapasons, married nicely to the French Fonds d'Orgue. A voluptuous Full English
Swell has continental fire by virtue of the authentic (but modified) French
reed battery, but the lyrical soft solo reed is a plaintive English Oboe. No
quirky nomenclature either. Although rooted in 19th-century English practice of
"Diapason, Principal, Twelfth, Fifteenth," etc., the stops in our
organs are what they say they are. If the Swell reed is spelled
"Trompette," you can be assured that you will hear a Trumpet with
French shallots and pipe construction.

The Great is based upon a 16' Double Open Diapason of tin which stands
proudly in the Gospel side case along with the rest of the division. A complete
Diapason chorus through Mixture, flutes at 8' & 4', and a Viola da Gamba
make up the flue work, and the reeds are Trombas, brought up to the manuals from
the Pedal Trombone. The Mixture breaks at octaves, rather than at fifth
intervals. In this way, one doesn't hear alternating unison and fifths playing
as the top rank, and the breaks are virtually unheard.

The Great also incorporates an harmonic corroborating stop which was more at
home in English and American concert organs of the early part of the last
century. Our four-rank Harmonic Mixture has in it a unison, a quint, a tierce,
and a flat-seventh. These are all the harmonics present in Tromba class reeds,
which are on the Great at 8' and 4' pitches. We originally included the
Harmonic Mixture as a way to prevent the dark Trombas from covering the
brightness of the mixture work in full organ, but have found that when used
sans Trombas, the ancient flavor of 18th-century Dutch organs is perceived in
an uncanny way. One could even imagine the wind to be unsteady--but of course
it's not!

The Solo has a Diapason Chorus nearly mirroring the Great, and despite its
distance from the Main Organ, it can exactly balance the Great Plenum in
certain contexts. The Solo contains a pair of E. M. Skinner-inspired Gambas,
the celesting rank in the case across the church from its unison pair. Now
that's a Celeste! The Flügel Horn, while a lyrical romantic solo reed, has
just enough harmonic interest to function beautifully as a chorus reed. The
Bassett Horn is certainly at home playing obbligato parts in Elgar, but has
just enough Cromorne in it to play Daquin with a French nose in the air.

One can use the Choir in a classic context, as a Positiv when a lighter foil
to the Great is desired. But this division is the real choral accompanying
workhorse. It's one of the most elegant, light, but profound Choir divisions we
have created. The Choir features a flute chorus from 16' up, and a proper
Diapason chorus complete with a four-rank quint mixture, a fifth interval
higher than the Great. But the luxurious feature in this day and age is our
Dulciana Chorus, which includes a three-rank mixture in which the 4' enters
early on at tenor C. Our Dulcianas are truly small Diapasons, and there is
nothing like the effect of accompanying voices with Diapason color, but at such
a soft volume. The Dulciana Mixture has many uses in coloring and painting
texts, 90% of which I would never have envisioned. Our Cornopeans are
small-scaled, but fundamental Trumpets as the original prototypes were, not the
horn-like Cornopeans one would otherwise love to hate. The Clarinet is truly of
English style, and the English Horn is orchestral in color with enough body to
be the foundation of the Choir reed battery, yet enough jazz in the color to
differentiate itself from the more fundamental Swell English Oboe.

The Chapel Organ includes a small-scaled Diapason Chorus at 8' and 4' to
lead the hymn-singing, and an 8' Aeoline and Vox Angelica. These very, very
soft string-toned stops allow the worshippers there to feel connected, and also
provide a powerfully effective pianissimo "wrap-around" effect as the
softest sounds concluding a smooth decrescendo. These little strings can just
be barely heard in the nave as the expression box closes on the Solo Flute
Cœlestis. When they play alone, they are literally in another room, off in
the distance.

In the All Saints organ, the Great, Swell, Choir, Solo, and a portion of the
Pedal divisions play upon 4 inches of wind pressure. The Trombones and Trombas
play upon 7 inches of wind, the Solo Festival Trumpets on 6 inches, and the
Major Tuba plays upon 20 inches of wind. The Tuba is housed in its own
expression box, and the organist can easily select which expression shoe may be
used to operate the Tuba's expression (or whether it is to remain open) by a
simple rotary switch. We aim to expand the color and dynamic range of the pipe
organ, while keeping the console controls simple and straightforward.

Before I was selected as their builder, Ray, Elizabeth, and Jeff charged me
to design the perfect instrument for all their requirements, and they would
undertake the responsibility of presenting this plan to the organ committee to
get their reaction, and see if the instrument would have to suffer at the hands
of "value engineers." Although my past experience made me somewhat
timid about presenting such a large (expensive) instrument as part of a
selection competition, we arrived at the specification of 63 straight speaking
stops, 87 ranks of pipes (5229 pipes overall), in five free-standing cases
throughout their church.

I will never forget the evening of a crucial organ committee meeting when I
received an excited telephone call from Ray. The musicians presented the
proposal and the room fell silent. People on the committee asked questions to
the effect: "Now, do all three of you musicians agree on this builder? Do
all three of you agree with each other in every respect to this instrument?"
When the answer was an emphatic yes, a committee member said: "How many
times do musicians agree with each other about anything, let alone every of the
many thousands of details in this organ's design!? This is what we need for All
Saints, and we need John-Paul to build it for us." A member of the
committee, Sarah Kennedy, later wrote a check for the entire project, in loving
memory and in honor of her family, The Kenans.

The organs' visual designs were developed during August and September of
2001. The first draft of the Chapel Organ's design was revised to be more in
keeping with the modern nature of the chapel (and less like King's College,
Cambridge). The Main Organ and the Solo Organs were built according to my first
pen-and-ink renderings.

All of my design drawings are executed by hand. The discipline of cleaning
the drafting table and truing the parallel bars and 90-degree instruments
contributes to clearing my mind of everything except what I need to think about
for the organ on the blank piece of paper.

It is always my goal to design organ cases which appear as though they had
always been in the church. The All Saints cases use shapes and colors found
throughout the room, and mirror the restrained nature of the Victorian Gothic
design. But the cases become vivid, exciting, and dramatic by incorporation of
the fabulous red enamel and gold leaf adorning the church's clerestory. The
inclusion of the red gave me license to add contracting pieces of red-stained
Honduras mahogany in the stained white oak cases. The soaring nature of the
Solo Organs, as their lines ascend while moving toward the great window, seemed
to cry out for heraldic angels, announcing the Great Day of Judgment on
gold-leafed trumpets. Thanks to parishioner David Foerster for making these
possible.

All of us will remember exactly where we were on 9/11. I was at the drafting
table finishing the designs for the Main Organ cases. I had penciled the
drawing the day before and was preparing to ink the drawing when I heard the
news reports. My entire staff came up to the drafting room and we all went to
the conference area where a small television showed us the horrors unfold as
the second airliner smashed into the second building. As we heard a large
airplane overhead, being sent to land at our local airport, I was asked if we
were going to close for the day. I said, no. We had to go about our task of
making beautiful things, especially in light of the ugliness that visited
itself on our country that day. If we wanted to take time off individually to
mourn our country's losses, go with my blessing, but the doors would remain
open and I would continue to draw a beautiful pair of pipe organ cases.

I set to cleaning out my India ink pens, and put on a CD of The English
Anthem II from St. Paul's Cathedral,
London.

Oh Lord, look down from heaven, and behold the habitation
of Thy holiness and of Thy glory: Where is Thy zeal and Thy strength? Thy
mercies towards me, are they restrained?

My deepest thanks to the musicians at All Saints Church, everyone on the
organ committee, Greg Kellison, chairman; Paul Elliott, the rector; David
Foerster, and Sarah Kennedy for selecting me and my firm for this tremendous
commission.

My overwhelming gratitude goes to the members of my staff whose hard work
and dedication made such an excellent instrument so sublime: Charles Eames,
executive vice president, general manager and chief engineer; Brian K. Davis,
associate tonal director; Keith Williams, service department director; Shayne
Tippett, shop manager; Jay Salmon, office manager; Evan Rench, pipe maker,
voicer; Steve Downes, tonal assistant; C. Robert Leach, cabinetmaker; Stuart
Martin, cabinetmaker; Kenneth McCabe, winding systems; Ray Wiggs, consoles,
windchests; Robert Ference, service technician; Stuart Weber, service
technician; Jonathan Borchardt, service technician; JoAnne Hutchcraft Rench,
receptionist.

--John-Paul Buzard

GREAT (4-inch wind pressure)

Manual II - unenclosed pipework

16' Double Open Diapason

8' First Open Diapason

8' Second Open Diapason (ext 16')

8' Viola da Gamba

8' Harmonic Flute

8' Bourdon

4' Principal

4' Spire Flute

22/3' Twelfth

2' Fifteenth

2' Fourniture V

13/5' Harmonic Mixture IV

16' Double Trumpet

8' Trombas (ext Ped)

4' Clarion (ext Ped)

Tremulant

Chimes

8' Major Tuba (20" wind)

8' Tuba Solo (melody coupler)

8' Fanfare Trumpets (Solo)

SWELL (4-inch wind pressure)

Manual III - enclosed and expressive

8' Open Diapason

8' Stopped Diapason

8' Salicional

8' Voix Celeste

4' Principal

4' Harmonic Flute

22/3' Nazard

2' Flageolet

13/5' Tierce

22/3' Full Mixture V

16' Bassoon

8' Trompette

8' Oboe

8' Vox Humana

4' Clarion (ext 16')

Tremulant

8' Major Tuba (Gt)

8' Fanfare Trumpets (Solo)

CHOIR (4-inch wind pressure)

Manual I - enclosed and expressive

16' Lieblich Gedeckt (wood)

8' English Open Diapason

8' Flûte à Bibéron

8' Gedeckt Flute (ext 16')

8' Dulciana

8' Unda Maris

4' Principal

4' Koppel Flute

2' Recorder

2' Mixture III–IV (Dulcianas)

11/3' Fourniture IV

Sesquialtera II (22/3' & 13/5')

16' English Horn

8' Cornopean

8' Clarinet

Tremulant

Cymbalstern (14 bells)

8' Major Tuba (Gt)

8' Fanfare Trumpets (Solo)

Harp (digital)

Celesta (digital)

ANTIPHONAL SOLO (4- & 51/2-inch wind)

Manual IV - in twin cases over the narthex (expressive)

8' Open Diapason

8' Viola da Gamba

8' Gamba Celeste (CC)

8' Melodia

8' Flute Cœlestis II (Ludwigtone)

4' Principal

4' Flûte d'Amour

2' Doublette

11/3' Mixture IV

8' Flügel Horn

8' Corno di Bassetto

Tremulant

Cymbalstern (8 bells)

Chimes (Gt)

8' Fanfare Trumpets

8' Major Tuba (Gt)

Harp (digital)

Celesta (digital)

PEDAL (various wind pressures)

32' Double Open Diapason (digital)

32' Subbass (digital)

32' Lieblich Gedeckt (Ch, digital)

16' First Open Diapason

16' Second Open Diapason (Gt)

16' Bourdon

16' Lieblich Gedeckt (Ch)

8' Principal

8' Bass Flute (ext 16' Bourdon)

8' Gedeckt Flute (ext 16' Lieblich)

4' Choral Bass

4' Open Flute (ext 16' Bourdon)

22/3' Mixture IV

32' Contra Trombone (wood)

16' Trombone (wood, ext 32')

16' Double Trumpet (Gt)

16' Bassoon (Sw)

8' Trumpet (ext 16')

4' Clarion (Sw)

8' Major Tuba (Gt)

8' Fanfare Trumpets (Solo)

CHAPEL (4-inch wind, floating)

8' Open Diapason

8' Aeoline

8' Vox Angelica (tc)

4' Principal

Chapel on Great

Chapel on Swell

Chapel on Choir

Chapel on Solo

Chapel on Pedal

Intraddivisional couplers

Gt/Gt 16-UO-4

Sw/Sw 16-UO-4

Ch/Ch 16-UO-4

Solo/Solo 16-UO-4

Interdivisional couplers

Gt/Ped 8, 4

Sw/Ped 8, 4

Ch/Ped 8, 4

Solo/Ped 8, 4

Sw/Gt 16, 8, 4

Ch/Gt 16, 8, 4

Solo/Gt 16, 8, 4

Sw/Ch 16, 8, 4

Solo/Ch 16, 8, 4

Pedal Stops to Divisional Pistons

The Wicks Organ Company, Highland,
Illinois has built a new organ for the Barrington United Methodist Church,
Barrington, Illinois. In 1999 the church building was destroyed by fire. Their
losses included a 41-rank Möller pipe organ, which had been rebuilt as
recently as 1988. As planning for their new building began, the search for a
new pipe organ started. The church’s demands for their new organ were
that it had to be a great congregational organ, but also able to perform for
recitals as well. The sanctuary was to be a top-notch performance facility as
well as a place of worship. The church desired an organ of 3 manuals and 5
divisions, including an antiphonal. Each division was to have a principal
chorus, and the foundations of the Great organ were to be exposed.

The church committee heard many styles of instruments built by Wicks over
the last seven decades. This included, a North German neo-Baroque style
instrument, a symphonic organ scaled and designed by Henry V. Willis, an
American Classic, and an Aeolian instrument from the 1920s that had been
rebuilt by the Wicks Organ Company in conjunction with Mr. Madison Lindsey. The
service playing abilities of each instrument were demonstrated to the
committee, and they identified and found themselves drawn to the
English/symphonic style of the rebuilt Aeolian instrument. The organ committee
chose Wicks over several other builders after hearing several new Wicks
installations and the company ‘s recent success in exactly this style of
instrument.

The completed organ is described as an English service organ with orchestral
capabilities. The instrument is able to not only provide a seamless crescendo
from ppp to fff, but can do it with flair. In addition to service music, the
organ is able to perform every possible type of organ literature from the
Renaissance to the present. It is also able to realize orchestral
transcriptions with great skill, thanks to the presence of many orchestral solo
stops in each division, blending choruses, and 2-inch thick beveled and overlapping
felted shades. The completed organ consists of 24 ranks of pipes and 25 digital
voices. The Wicks design team pre-engineered space to accommodate real pipe
ranks to replace these voices. The Swell is on 7 inches of wind, the Pedal 10
inches; the Choir and Great are on 6 inches, with the exception of the
Clarinet, English Horn, and Tuba in the choir, which are all on 10 inches.

The solo reeds of this organ are of a unique style, derived from the
Willis/Wicks style reeds used in many Wicks organs over the decades, married to
the traditional ideas of Skinner solo reeds. The end results were clear,
smooth, stops of unique color and great versatility throughout the compass. The
greatest asset to the organ is the lively acoustical environment of the sanctuary.
The collaboration of the building committee, acousticians Kirkegaard &
Associates of Chicago, and the Wicks Organ Company have resulted in a
beautiful, successful combination of organ and room.

The console is drawknob style with 45-degree side jambs, a glass music rack,
and P&S keys with ivory resin naturals and ebony sharps. The drawknobs are
made of polished hardwood. Made of red oak, the interior is very light and the
exterior is stained to match the woodwork of the chancel furnishings. The console
features a tilt tab that allows the digital Tuba and Festival Trumpet to
emanate from the antiphonal division located in the rear of the church instead
of their native divisions. The console also has a Manual I/II transfer for
French literature.

Installation of Opus 6412 began in August of 2003, and an initial tonal
finishing and adjustment of digital voices took place in early September. After
the church’s dedication, Wicks tonal director Dr. William Hamner and reed
voicer Greg Caldwell completed an entire tonal finishing.

--Brent Johnson

Great (exposed)

16’ Violone*

8’ First Open Diapason

8’ Second Open Diapason

8’ Violoncello

8’ Harmonic Flute (Ch)

4’ Principal

4’ Flute Octaviante

2’ Fifteenth

IV Full Mixture

8’ Chorus Tuba (Ch)

8’ Festival Trumpet* (Ant)

8’ Tuba Mirabilis* (Ant)

Chimes* (Ant)

Swell (expressive)

16’ Minor Bourdon*

8’ Open Diapason

8’ Stopped Diapason*

8’ Viola*

8’ Viola Celeste*

8’ Flauto Dolce*

8’ Flute Celeste*

4’ Octave Diapason

4’ Triangular Flute*

22/3’ Nazard*

2’ Recorder*

13/5’ Tierce*

IV Plein Jeu

16’ Waldhorn*

8’ Cornopean

8’ Oboe*

4’ Clarion

8’ Festival Trumpet* (Ant)

8’ Tuba Mirabilis* (Ant)

Tremolo

Choir (expressive)

8’ Geigen (1-12*)

8’ Concert Flute

8’ Dolcan*

8’ Dolcan Celeste*

4’ Octave Geigen

4’ Transverse Flute

2’ Harmonic Piccolo

16’ Bass Clarinet

8’ Clarinet

8’ English Horn

8’ French Horn*

8’ Festival Trumpet* (Ant)

8’ Tuba Mirabilis* (Ant)

8’ Chorus Tuba

Tremolo

Harp*

Antiphonal (unenclosed - floating) (prepared)

8’ Festival Trumpet*

8’ Tuba Mirabilis*

Chimes*

Antiphonal Pedal (prepared)

Pedal

32’ Contre Bourdon*

16’ Open Wood

16’ Major Bourdon

16’ Violone* (Gt)

16’ Minor Bourdon* (Sw)

8’ Principal

8’ Flute

8’ Stopped Flute

4’ Octave

4’ Harmonic Flute (Gt)

32’ Ophicleide*

16’ Trombone (1–12*)

16’ Waldhorn (Sw)

8’ Tromba

8’ Trumpet (Sw)

4’ Oboe (Sw)

7-bell zimbelstern

*= Digital Voices

The Odyssey of an Organbuilder

R. E. Coleberd

R. E. Coleberd, an economist and retired petroleum industry executive, is a contributing editor of The Diapason.

Introduction

The careers of numerous American organbuilders in the late 19th and early 20th centuries are the story of a journey—from Europe to the United States or from shop to shop. From Germany came George Kilgen and Philipp Wirsching; from England John T. Austin, Octavius Marshall, and Henry Pilcher. In the U.S., Adolph Reuter’s sojourn took him from Barckhoff to Pilcher, Verney, Casavant (South Haven), and Wicks before he founded his own firm first in Trenton, Illinois, and then Lawrence, Kansas. A. G. Sparling moved from Lyon & Healy to Stevens to Holtkamp. These individuals and their firms are typical of the rich and colorful history of pipe organ building in America. Yet perhaps none of them comes close to the odyssey of Stanley Wyatt Williams 1881–1971 (see photo). Williams’ lifetime spans the arc of his era—from Robert Hope-Jones to G. Donald Harrison (Aeolian-Skinner) with stops at Electrolian, Wirsching, Murray Harris, Robert-Morton, Kimball, and E. M. Skinner. His talents as a voicer and tonal finisher played a pivotal role in the succession of nameplates in the U.S. West Coast pipe organ industry, and his stellar reputation led to important sales by recognized national builders.

Early Life

Stanley Wyatt Williams was born in London on October 29, 1881, the youngest of four sons and two daughters of George Edward Williams, who described himself as a “gentleman,” having made a comfortable living in the brewing industry. His family was musical; his mother sang a solo for Queen Victoria, and each of the sons was taught a musical instrument.1 As he recalled many years later: “I was always a little bit crazy about organs, not that I knew anything about them.”2 After attending the Mostyn House School in Cheshire and the Whitgift Grammar School at Croydon, Surrey, he enrolled in Dulwich College (southeast of London), founded in 1619.3 G. Donald Harrison graduated from there some years later. Suffering a health setback, Williams withdrew from school on the advice of a London physician.4 In the ensuing soul-searching, a well-known London organist, Charles Lawrence, took him to see an organbuilder and the instrument in the builder’s home. “That interested me more than ever,” he later commented, and he determined to become an organbuilder.5 His daughter, Mary Cowell, recalled that the family apparently was none too pleased with his choice of vocation, considering organbuilding a “trade” and thus beneath the dignity of their aristocratic image.6 Nonetheless his father paid the two or three hundred pounds required to enroll him as an apprentice to the legendary organbuilder, Robert Hope-Jones.7

An electrical engineer by profession who held an important position with the National Telephone Company in Liverpool, Hope-Jones was organist and choirmaster of St. John’s Church in Birkenhead, across the Mersey River from Liverpool. With local financial backing he organized the Hope-Jones Organ Company in Birkenhead, building instruments first in the factory of Norman & Beard in Norwich, and then in the Ingram, Hope-Jones shop in Hereford.8 Williams joined him in 1899 at age 18 (see photo, page 25). He couldn’t have found a better teacher or a more prophetic environment in which to acquire organbuilding skills and prepare for what would become a most interesting career. “As an apprentice . . . I was assigned to work at every phase of organ building. I voiced, I carpentered, I electrified—everything about organbuilding had to be learned. It was something I was later very grateful for.”9 “Not only a genius, but a great teacher,” said Williams of Hope-Jones: “He taught all of us to think for ourselves.”10

The controversial and enigmatic Hope-Jones would exert a profound and far-reaching influence on the King of Instruments through his revolutionary tonal and mechanical innovations. He pioneered what would emerge as the symphonic-orchestral voicing paradigm that swept the American industry in the 1920s. This type of instrument was marked by an ensemble of different tonal groups all at the same pitch, in contrast to the time-honored chorus of different pitches within the same tonal family. Mixtures and mutations were discarded and replaced with unison voices of comparatively wide or narrow scale pipes on higher wind pressures. The entire instrument was enclosed.11 Hope-Jones’s mechanical inventions included double-touch, a key characteristic of theatre organs, and high resistance electro-magnets requiring very little current.12

After completing shop routines, Williams joined the road crew and worked on the organ in the Hereford cathedral. There he met and fell in love with Isabel Robbins, whom he would marry in January 1908. When Hope-Jones immigrated to the United States in the spring of 1903, Stanley elected to remain with the former partner, Eustace Ingram, finishing instruments then under construction. A fellow worker asked whether he had ever considered moving to the States, and told him that an American firm, the Electrolian Company of Hoboken, New Jersey, was looking for a voicer. He interviewed, accepted an offer, and bidding farewell to his sweetheart in Hereford crossed the Atlantic in 1906.13 Williams was to be among several former Hope-Jones apprentices who came to America.14

The Land of Opportunity

Voicers are the cornerstone of any organbuilding enterprise. Stanley Williams was called to voice and finish instruments built by the Los Angeles Art Organ Company, now relocated to Hoboken and renamed the Electrolian Organ Company.15 He installed and finished the Electrolian-built 19-rank, two-manual and pedal instrument in the Wolcott School in Denver, Colorado (among whose pupils was Mamie Dowd, the future wife of President Dwight Eisenhower), and finished an instrument built for a Presbyterian church in Philadelphia. His reputation as a gifted voicer and finisher soon became well-known, for, as he later recounted, when he returned from Philadelphia to Hoboken, seven job offers awaited him.16 The Electrolian assets were next acquired by the legendary Philipp Wirsching of Salem, Ohio, whom Stanley met when he finished the instrument Wirsching built in 1907 for Our Lady of Grace Roman Catholic Church in Hoboken.17 Wirsching moved the business to Ohio, and Stanley joined him there.

Among the Electrolian assets Wirsching acquired was a contract for a two-manual and pedal organ with player attachment for the new palace of the Maharaja of Mysore, India. In January 1908, Williams returned to England, married his sweetheart Isabel, and in July the couple set sail for India to install the organ, traveling through the Mediterranean and the Suez Canal.18 This was to be the “Great Adventure,” surely one of the most fantastic episodes (see photo, page 25) in the history of organbuilding the world over, and long a familiar topic of conversation in the rich folklore of the industry (see James Stark and Charles Wirsching Jr., The Great Adventure, forthcoming). Stanley and Isabel returned to England in January 1910, and in March sailed for America where Stanley resumed work with Wirsching.

While finishing an instrument in Terre Haute, Indiana, Williams received a telegram from the Murray M. Harris Organ Company in Los Angeles asking him to come to the West Coast to finish voicing the instrument they were building for St. Paul’s Episcopal Church in Los Angeles19 (see stoplist). Charles McQuigg, the Harris head voicer, had left the company, no doubt mindful of its precarious financial condition.20 Williams responded, completed the assignment, and returned to Ohio. Then the Harris people, having recognized his skills and eager to maintain their reputation for fine instruments, offered him the head voicer position in the newly reorganized firm. Williams accepted and moved to Los Angeles in 1911 where he would remain for the balance of his career. As David Lennox Smith, Harris scholar, observed: “the most notable addition to the staff of the Murray M. Harris Company in its final years was Stanley Wyatt Williams.”21

Los Angeles Organbuilders

At the turn of the century the market for the King of Instruments on the West Coast was vibrant and growing rapidly, built upon the tidal wave of immigration and the rapid pace of church construction in the emerging metropolitan landscapes. Moreover, the spirit of enterprise was everywhere, marked by numerous “self-made” men eager to apply their talents and fortunes to railroad building, telegraph, mercantile trade, real estate development—and organbuilding. Local businessmen and their funding initially played a pivotal role in the succession of organbuilder nameplates in Los Angeles, as they did in establishing the industry elsewhere, for example, in Erie, Pennsylvania.22 But these “outsiders” invested with virtually no inkling of the inherently high-risk business of building pipe organs. Cost estimating, pricing, competition, and, especially, critical problems of cash flow vexed most builders and overwhelmed others.23 As Stanley explained: “You had to watch your pennies very closely to have a couple left when you finished an organ.”24 For a while the euphoric atmosphere of large buildings, talented employees, and fine, heavily publicized instruments masked these fundamental concerns. But before long financial realities took over.

Murray M. Harris

Organbuilding in Los Angeles began in 1895 when Fletcher & Harris built a two-manual instrument for the Church of the Ascension, Episcopal, in Sierra Madre.25 Murray M. Harris (1866–1922), a skilled voicer who had apprenticed with Hutchings in Boston, continued on his own. In 1900 he recruited a cadre of skilled artisans led by William Boone Fleming (1849–1940) who became superintendent. Harris acquired a spacious factory building and prospered by building instruments for the local market.26 In July 1900, the firm was incorporated as the Murray M. Harris Organ Company and capitalized at $100,000.27 In 1903 Harris contracted to build a 140-stop Audsley-designed instrument for the St. Louis Exposition. It was to be voiced, at Audsley’s request, by John W. Whitely, a well-known English voicer, described as “one of the pioneer spirits in the Birkenhead shops of Mr. Hope-Jones.”28 The St. Louis organ was something of a watershed in American organbuilding history. As David Lennox Smith commented: “The influence of the St. Louis organ could soon be seen in the String Organ divisions, multiple enclosures, and other new features that were included with growing frequency in specifications for large new organs.”29

Soon financial problems began that would continue to plague Harris. Working capital proved inadequate to finish the mammoth St. Louis instrument. In August 1903, the Los Angeles Times reported that shareholders, including Harris, his wife Helen, and others, were delinquent in court-ordered assessments of $10 per share on their stock. The problem resulted when only 352 shares, par value $100 per share, were actually subscribed, and thus of the authorized capitalization of $100,000, only $35,200 was paid-in and perhaps even less. The court stipulated that the additional stock be auctioned off at the company offices to acquire the funds necessary to keep operating.30

Enter Eben Smith, an archetypical entrepreneur who was described in the press as a “mining man” and “Colorado banker.” He had made a fortune in Colorado silver mines and was president of the Pacific Wireless Telephone Company.31 Smith purchased 500 shares of Harris stock, thereby acquiring a controlling interest in the business. He renamed it the Los Angeles Art Organ Company.32 In 1905 a patent infringement lawsuit threatened the company with liquidation, whereupon key employees, led by Fleming, moved east for a brief sojourn in Hoboken, New Jersey, under the name of Electrolian Organ Company.33 By September 1907, the employees, minus Fleming (who moved to Philadelphia where he was subsequently employed to superintend the installation of the St. Louis Exposition organ in the Wanamaker store), were back in Los Angeles, having joined the reorganized Murray M. Harris Organ Company.34 The head voicer was now Charles W. McQuigg, a protegé of John W. Whitely, who had remained in Los Angeles and served briefly as the Pacific Coast representative of the Barckhoff Church Organ Company of Pomeroy, Ohio.35

St. Paul’s Episcopal Church and First Church of Christ, Scientist

The 1911 instrument Stanley Williams was called to voice and finish reflected the manifold changes in stoplist design and voicing taking place in the industry. With Harris’s training at Hutchings and acquaintance with other work in the east, it was not surprising that his early stoplists closely paralleled the work of these builders.36 The 1901 Murray Harris at Stanford University is a good example. As described by Manuel Rosales, who restored this instrument in 1986, the Stanford Harris was a typical 19th-century instrument featuring a well-developed principal chorus on the Great, a secondary chorus on the Swell, and a small Choir organ with not a full chorus but other colors. The voicing, on three to four inches wind pressure, was gentle and clear. Flutes were not exaggerated, i.e., no tibia tone, strings were precise and clear, and pedal stops were well balanced with the manuals. In contrast, the St. Paul’s specification (see stoplist, page 24) was confined to an ensemble of unison and octave voices at 16¢, 8¢, and 4¢ pitches, with emphasis on the 8¢ voice, representing the trend of the day. Diapason scales were much larger, and string scales much smaller than in earlier instruments.37 This characteristic most likely reflected the influence of John Whitely, the voicer who was closely associated with Audsley and who joined Harris in 1903, as well as Charles McQuigg, said to have “absorbed much of Whitely’s technic and ideal.”38

The first organ where Stanley’s design influence is found is the 1912 instrument for the First Church of Christ, Scientist, Los Angeles (see stoplist). Having also felt the impress of Whitely in England, he substituted a Tibia Clausa, a Hope-Jones stop, for the customary Gross Flute on the Great.39 But as Rosales points out, the absence of a tremolo on this division indicates this voice was viewed as filling out the ensemble, in contrast to a solo voice as found in a theatre organ. This organ contained a Dolce Cornet on the Swell and a 22?3' and 2' on the Great in what might be termed a vestigial chorus, but in no way could it be considered a well-developed Great chorus, which by this time had largely disappeared from American stoplists. What emerges is an accompanimental instrument in which the high-pressure Tuba, dominating the ensemble or playing solo against it, is symbolic of the trend.40

Tonal Philosophy, 1913

Williams’ expertise in voicing and finishing was soon recognized. In February 1913, he was the featured speaker at a meeting of the Los Angeles Chapter of the American Guild of Organists.41 His comments reflected his knowledge of English organbuilding, his background with Hope-Jones, and focused on the character and content of foundation tone. True diapason tone must predominate, he asserted. Subject to broad limits, it is bounded by string tone at one end of the spectrum and flute tone at the other. Old diapasons were “mellow and sweet,” a cantabile sound suited to today’s Choir organ. He faulted “Old Masters” for failing to preserve the character and power of voicing throughout the entire compass, which he attributed to imperfect scaling. The prevalence of upperwork and the introduction of “harsh” reeds, in the middle of the 19th century, overbalanced diapason tone, Williams said, leading cynics to refer to the “sausage frying” sound of a full Swell. To remedy this result, diapasons were increased in scale and number. Hard, stringy and nasal, they were brilliant in a way that favored upper partials, sacrificing fundamental tone and thereby blending well with mutations and reeds. Then the pendulum swung back to the other extreme and high-cut mouths produced a flabby tone devoid of the necessary partials and bordering on the fluty.'
He outlined the foundations of a three-manual organ, reflecting the Hope-Jones influence and the tastes of the time. On the Great manual the first diapason should be large scale and with a leathered lip; the second diapason, of medium scale, not leathered, but not in any way stringy. The third should be a “mild and sweet” voice, and quite soft, much like the work of Father Bernard Smith. On the Swell, a Hope-Jones phonon-type should be the first diapason, large scale and leather-lipped, necessary to balance the Swell reeds. The second should be a violin or horn diapason. For the choir organ, a mild geigen or gemshorn was the preferred voice. He cautioned that every stop in a well-voiced organ must have its “individuality,” and lamented builder fads, which he found detrimental to the advancement of the instrument. He challenged organists and organbuilders to work together to uphold the dignity of the instrument and its music to insure its high place in the church service. Williams’ comments offer an interesting contrast to today’s perspective and were superseded in his own thinking as reflected in his work with Kimball and Skinner.

Murray M. Harris, continued

In 1912, a year after Williams joined the Harris firm, financial problems reappeared. Murray Harris sold his interest to a retired mining man from Mexico named Heuer, who soon became disillusioned with the meager (if any) profits in organbuilding, and sold out.42 In August 1913, control of the company passed to E. S. Johnston, former manager of the Eilers Music Company in Los Angeles, who in November that year advertised the Johnston Organ and Piano Manufacturing Company as successor to the Murray M. Harris Co.43 Johnston and real estate developer Suburban Homes then agreed to build a 75,000 square foot factory in Van Nuys, which opened in November 1913. Soon, however, working capital was again exhausted. Johnston and his partner Bell journeyed east in search of funds but apparently returned empty-handed.44 Then Suburban Homes of Van Nuys, having turned down Johnston’s plea for financial backing, were the new owners by default. They renamed the business California Organ Company and promptly palmed it off to the Title Insurance and Trust Company of Los Angeles, holders of the mortgage on the factory building.45

Robert-Morton Organ Company

At this time a sea change was taking place in the whole concept of pipe organs and in the industry that built them. The theatre market, with its radically different instrument, was growing rapidly, having displaced the higher-cost pit orchestra. Equipped with tibias, kinuras and other voices as well as traps and toy counters, these instruments were ideally suited for accompanying silent movies. The Rudolph Wurlitzer Company, whose name would soon become the generic term for the theatre pipe organ, was already enjoying a nationwide business. Within less than ten years, organbuilding in America would be virtually divided into two separate industries, with Wurlitzer, Robert-Morton, Barton, Link, Marr & Colton, Page, and Geneva identified almost exclusively with the theatre paradigm. Other builders, although they built theatre organs, were primarily identified with the church instrument and market.
The California Organ Company was at a crossroads. Would they continue in the church organ industry, now well established nationwide and well represented on the West Coast? Or would they recognize and capitalize on the growing theatre organ market? The resources were in place in Van Nuys: a well-appointed modern factory, skilled artisans, and a talented, experienced senior management, which together had guaranteed the succession of nameplates. As the late Tom B’hend, whose research chronicles much of the history of this era, observed: “The Wurlitzer Hope-Jones instruments were gaining popularity; the unit principle was being accepted without reserve by up and coming theatre organists . . . If the California Organ Company were to enter the theatre field, it would be necessary to produce a unit instrument of comparable quality.”46 With his rich background as an apprentice of Hope-Jones, who could be better qualified to design and build such an instrument than Stanley Williams? As Williams later reflected: “I was the one man on the West Coast who could put this sort of instrument into production.”47

Enter the American Photo Player Company of Berkeley, California. In 1912 this firm produced a small tubular-pneumatic pit instrument combining a few ranks of flue pipes and perhaps a reed stop with a piano. Booming sales and nationwide distribution alerted them to the tremendous potential for a unit theatre organ.48 Negotiations beginning in the spring of 1916 led to the merger of the California Organ and American Photo Player companies and on May 2, 1917, the Robert-Morton Organ Company was duly incorporated.49 As the late David Junchen, noted theatre organ biographer, commented: “Werner (Harry J. Werner, Photo Player promoter) had found just the ticket for expanding his theatre sales, and the owners of the California Organ Co. had found a buyer for the albatross they didn’t want anyway.”50 Stanley Williams was named plant superintendent and the following year vice president. Opus 1, a two-manual organ designed by Williams, was built for the California Theatre in Santa Barbara.51 As B’hend noted: “The men and women who built pipe organs in Southern California never left their work benches to take up fabrication of the Robert-Morton pipe organ.”52

The new company increasingly focused on the theatre instrument, but initially it continued to service a spectrum of the local market, including churches. In 1917 Morton built a $10,000 instrument for the A. Hamburger and Sons Department Store in Los Angeles. The Los Angeles Times noted that it was the first organ of its kind on the Pacific Coast, and was acquired “for the purpose of giving the people a musical education and making shopping more pleasant.”53 In 1920 Williams sold and most likely designed a 72-rank, six-division, four-manual organ for Bovard Auditorium at the University of Southern California in Los Angeles.54 Edward Hopkins lauded Williams’ “English training, practical experience at the voicing machine, and open-minded progressiveness,” saying the Bovard organ “stands pre-eminent.”55 This instrument featured Morton’s horseshoe console (Morton didn’t build drawknob consoles) and concrete swell boxes enclosing the entire instrument.

W. W. Kimball Company

Williams, a realist in business matters, recognized that Morton made the right choice in electing to build theatre pipe organs. Yet his heart was with the classic church organ, and the Bovard instrument no doubt reinforced his convictions. As his daughter reflected: “He didn’t like traps and toy counters.”56 He resigned from Morton in early 1922, and was feted by employees at a Saturday afternoon gathering at the shop in recognition of his eleven years service to Morton and its predecessors.57 Momentarily, he elected to go out on his own. He and his wife Isabel, together with Carl B. Sartwell, his colleague at Morton, formed Stanley W. Williams, Incorporated and built perhaps one or two instruments, his daughter believes; the details are unknown.58 But the odds were against them. By this time what local capital had been available was already committed to the theatre organ business, and nationally known church organ builders were well represented on the West Coast. Stanley soon wisely recognized that with his interests, his next opportunity lay with an established (i.e., well-capitalized) church organ builder.

Williams then began a five-year sojourn with the W. W. Kimball Company of Chicago as their West Coast representative.59 His decision was no doubt influenced by his former colleague in Van Nuys, Robert P. Elliot, with whom he shared many details in a common philosophy of organbuilding. The much-traveled Elliot, who joined California Organ as vice president and general manager in October 1916, left in May 1918 to become head of the organ department at Kimball in Chicago.60 A dynamic and aggressive firm, Kimball was ever alert to market opportunities, and recognized that their name, well-established in pianos and reed organs, carried over into the market for pipe organs. A large newspaper advertisement by the Eilers Music House in Los Angeles, in April 1912, promoting the Kimball Player Piano, mentioned Kimball as “America’s Greatest Pipe Organ Builders.”61

During this period the Kimball company was making far-reaching changes in the mechanical and tonal character of their instrument, attributed primarily to the influence of Elliot and George Michel, the latter widely acclaimed for his superb reed and string voicing. As Junchen noted: “If George Michel was the voice of the Kimball organ, R. P. Elliot was its soul.”62 Improvements in Kimball engineering and action design, coupled with elegant workmanship, were marked by abandonment of two-pressure bellows and two-pressure ventil windchests with hinged pouches in favor of a pitman-action windchest with springs under the pouches. Tonally, Kimball moved away from the liturgical motif in church organ design toward a pronounced symphonic and orchestral paradigm, a new direction for American organbuilders.63

In Los Angeles

Stanley Williams opened his Kimball office in the downtown emporium of the Sherman-Clay Music Company. “For half a century, Sherman, Clay & Co. has been the philosopher and friend of good music on the Pacific Coast,” they advertised.64 When churches went looking for a pipe organ, they logically began with a music retailer. The connection between music retailers and organ sales was a salient but long-overlooked feature of marketing the instrument during this time. As early as 1902, Harris was represented by Kohler & Chase in San Francisco and then independently by Robert Fletcher Tilton, a well-known musician with an office in the Kohler & Chase building.65 In Los Angeles, the Aeolian Company was represented by the George J. Birkel Music Company, and Welte-Mignon by the Barker Brothers department store. Showrooms soon appeared. By 1926 Wurlitzer, Robert-Morton, and Link all maintained showrooms in Los Angeles.66

Williams’ work with Kimball began immediately, as did the maintenance business he established. He installed, finished, and perhaps sold the 23-rank, three-manual Kimball organ in the world-famous Angelus Temple in Los Angeles, an early megachurch seating 5,300 (see stoplist, page 27). This church, dedicated on New Year’s Day 1923, was built by the flamboyant evangelist Aimee Semple McPherson, founder of the International Church of the Four Square Gospel.67 It is a colorful instrument now undergoing restoration in what was once a wonderful acoustic, ideally suited to the worship style and tastes of the founder and the congregation. In what must have been the pinnacle of unification and duplexing, 23 ranks of pipes were spread over 61 speaking stops. Each rank was playable at three or more pitches and duplexed to two or more manuals. Synthetic stops included a saxophone and orchestral oboe. Couplers greatly increased the power and versatility of the instrument. The Orchestral division is in the same chamber as the Great, sharing voices and thereby giving the illusion of a larger organ as does the number of stop tabs on the console.68

Other Kimball sales by Williams in Los Angeles churches included organs in Hollywood Presbyterian, St. James Episcopal, Precious Blood Roman Catholic, and Rosewood Methodist churches.69 He also supervised the re-installation of the 1911 Murray Harris instrument in St. Paul’s Episcopal Cathedral in the new edifice in 1924, replacing the original console with one built by Kimball.70 The largest Kimball organ he sold, in 1926, was a 56-rank, 65-stop, four-manual for the First Baptist Church of Los Angeles (see stoplist).71 The West Coast correspondent of The Diapason, Roland Diggle, described it as having “lovely solo voices and a stunning ensemble.”72

Skinner and Aeolian-Skinner

In 1927 Stanley Williams made his last move, the capstone of his illustrious career, joining Ernest M. Skinner of Boston as Pacific Coast representative.73 He welcomed the opportunity to affiliate with America’s foremost builder of this era, and Skinner in turn was pleased that a man of such knowledge and reputation would now add luster to his prestigious firm. This association was celebrated with a dinner for the local organ fraternity at a fashionable downtown restaurant.74 In July 1928, Williams installed a two-manual, ten-rank, duplexed and unified Skinner instrument, Opus 690, in his home. An enclosed instrument representative of small residence organs built by the Boston patriarch, it comprised a diapason, unit flute, flute and celeste, string and celeste, and four reeds: vox humana, clarinet, French horn, and an English horn—the latter two Skinner favorites.75 Sales of two-, three-, and four-manual instruments began immediately: a four-manual for Immanuel Presbyterian Church, Los Angeles, in 1927, Opus 676, and in 1930 a 78-rank, four-manual organ for the University of California, Los Angeles (UCLA), Opus 818, designed by Harold Gleason in consultation with Lynwood Farnam and G. Donald Harrison (see photo above).76 The same year another four-manual organ was built for Temple Methodist Church in San Francisco, Opus 819.77 Sales in 1931 included a four-manual organ for First Congregational Church, Los Angeles, Opus 856, and the following year a four-manual for the residence of prominent Pasadena pediatrician Dr. Raymond B. Mixsell, Opus 893. Organizer of the Bach Festival in Pasadena, Dr. Mixsell engaged Marcel Dupré to play the inaugural recital on his instrument.78 Williams’ extensive service business, established when he began working for Kimball in 1922, carried him through World War II, when organ companies could no longer build new instruments. After the war, heavy sales resumed.

Tonal Philosophy, 1959

In 1959 Stanley was asked to appraise and recommend updates for the 1926 Kimball organ at the First Baptist Church in Los Angeles, an instrument he had sold and installed.79 The document he prepared sheds light on the evolution of Williams’ tonal philosophy and offers key insights into the prevailing orthodoxy of the 1920s, especially the practices of the Kimball Company, a long-neglected major builder. He asserted that during the 1920s, the entire organbuilding industry in the United States was “to some degree” influenced by the theatre pipe organ. Williams lamented this trend, which saw higher wind pressures and voicing of flutes, diapasons, strings, and reeds that tended to isolate and magnify their differences. He acknowledged the positive contribution of the theatre epoch in “better engineering practice and the speed and reliability of action.”

Williams called for major tonal revisions to make the instrument more suitable for worship services, choir accompaniment, and interpretation of the instrument’s great literature. These revisions included replacing all flue pipes in the Great division except the Gemshorn and the Melodia, substituting a Quintadena for the 16¢ Double Open Diapason, and eliminating the Tromba (see stoplists, pages 27 and above). On the Swell manual the many new ranks recommended included a “small scale bright tone trumpet” in place of the Cornopean, and on the Choir new mutations and a Krummhorn. He recommended revoicing the Gamba and Celeste on the Solo division for a “broader and softer” sound. In 1965 this instrument was enla

by James B. Hartman

Organbuilding in the United States and Canada is a thriving art practiced in hundreds of shops throughout the continent. Emerging from decades of stylistic extremes, organbuilders are combining a wealth of knowledge from the past with new technologies to meet contemporary design challenges. North American builders, compelled by a unique spirit of cooperation and openness, are successfully raising the artistic standards of this time-honored craft. (American Institute of Organbuilders, descriptive statement.)

The organ has occupied a prominent place in the musical culture of Canada since the days of the first European settlement, chiefly because of its close connection with church music and the ambitions of many congregations. The first organs, brought from France, were installed in Québec City around 1660. An anecdotal report mentions the acquisition by a Halifax church of a Spanish instrument that had been seized on board a ship in 1765.1 Following a period in which organs continued to be imported from England and France, organbuilding began as early as 1723 and flourished mainly in Québec and Ontario from the mid-19th century onward.2 By the second half of the 19th century, organ building had become a relatively important industry in Eastern Canada, where companies had acquired sufficient expertise to compete in the international market, including the United States.3

The development of organbuilding in Canada proceeded through several phases, beginning with early builders.4  The first known organbuilder was Richard Coates, who arrived in Canada from England in 1817; he supplied mainly barrel organs to several small churches in Ontario. Joseph Casavant, the first Canadian-born builder, installed his first instrument in the Montréal region in 1840; he transmitted his skills to his sons, who later established the company that achieved world-wide recognition. The arrival from the United States of Samuel Russell Warren in 1836 marked the introduction of professional-calibre organbuilding into the country. His family firm had produced about 350 pipe organs by 1869; it was sold in 1896 to D. W. Karn (see below). Other prominent organ builders included Napoléon Déry (active 1874-1889), Eusèbe Brodeur (a successor to Joseph Casavant in 1866), and Louis Mitchell (active 1861-1893) in Québec, and Edward Lye (active 1864-1919) in Ontario.

The years 1880-1950 were marked by unprecedented growth in organbuilding, beginning with the establishment of Casavant Frères in 1879 in Saint-Hyacinthe, Québec. The Canadian Pipe Organ Company/Compagnie d'orgues canadiennes was established in 1910 by some former Casavant staff, also in Saint-Hyacinthe (when the firm closed in 1931 its equipment was acquired by Casavant). Prominent Ontario builders included the firms of Richard S. Williams (founded 1854 in Toronto), Denis W. Karn (commenced 1897 in Woodstock), C. Franklin Legge (founded 1915 in Toronto, joined by William F. Legge 1919, who later established his own company in Woodstock around 1948), and the Woodstock Pipe Organ Builders (an organization of skilled craftsmen in that Ontario town, 1922-1948). Several smaller, independent builders were active for a time in Ontario, the Maritime provinces, and Manitoba (late 1880s). British Columbia, on the other hand, seems to have had no indigenous organbuilders, for instruments were imported from the United States or from England on ships that sailed around Cape Horn; one of the earliest arrived in Victoria from England by this route in 1861.

In the early 1950s some organbuilders, encouraged by younger organists who had played European instruments, as well as the increasing availability of sound recordings of these organs, turned to classical principles of organbuilding to counter what they perceived as the colorless sound palettes of Canadian organs of the 1930s. The return to earlier tonal aesthetics, inspired by the so-called 17th-century "Baroque organ," found expression in the construction of bright-toned, tracker-action instruments. The "new orthodoxy" was enthusiastically assimilated by Casavant Frères and by a number of independent builders in the same region, some of whom had received their training in Europe. Karl Wilhelm, Hellmuth Wolff, André Guilbault and Guy Thérien, Fernand Létourneau, Gabriel Kney, and Gerhard Brunzema were prominent in this movement, and many of them are still in business. Their accomplishments, along with the activities of other known organbuilders of the 1990s, will be described in chronological order, according to their founding dates, in the remainder of this article.5

Casavant Frères, Saint-Hyacinthe, Québec (1879)

Casavant is the oldest continuing name in organbuilding in North America. Joseph Casavant (1807-1874), the father of the founders of the company, began his organbuilding career while still a Latin student at a Québec religious college, where he completed an unfinished organ from France with the help of a classic treatise on organbuilding. By the time he retired in 1866, after 26 years in business in Saint-Hyacinthe, Québec, he had installed organs in 17 churches in Québec and Ontario, but none of them survive. His sons, Joseph-Claver Casavant (1855-1933) and Samuel-Marie Casavant (1850-1929), worked for Eusèbe Brodeur, their father's successor, for a few years. They opened their own factory in Saint-Hyacinthe, Québec, in 1879, following an extended tour of western Europe inspecting organs and visiting workshops; Claver had apprenticed briefly with a Versailles builder before the tour. In the early years the Casavant brothers were conservative in their tonal design, emulating the ensemble sound of the kind they had heard in old-world instruments that they had examined during their European tour. But from the outset the brothers were innovators, beginning with improvements in the electric operation of their organs in the 1890s. As their reputation spread beyond the cities and towns of their province, production increased steadily.

The company experienced difficult times in the 1930s due to economic conditions, much standardization, and repetitive tonal design. Production was curtailed during the years of World War II due to a shortage of materials, and the company manufactured many unit organs during this period. Later, new initiatives were undertaken by several imaginative artistic directors who served with the firm between 1958 and 1965: Lawrence Phelps from Aeolian-Skinner in the U.S.A.; and European-trained Gerhard Brunzema, Karl Wilhelm, and Hellmuth Wolff.

Most present-day Casavant organs exhibit a conventional design that retains both symphonic and modern elements in subtle synthesis. Casavant organs are recognized for their special tonal qualities and the way the individual stops are blended together into a chorus at all dynamic levels. Time-tested actions include tracker, electrically operated slider windchests, and electro-pneumatic (since 1892; tubular-pneumatic was last used in the mid-1940s). The company workshop has eight departments: metalworking, woodworking, mechanism, consoles, painting, racking, voicing, and assembly. Virtually all components are made in the workshop, including all flue and reed pipes (to 32-foot-length), reed shallots, windchests, consoles, keyboards and pedalboards, and casework, although specialized wood carving and gilding are done by outside artisans. A few electrical components, such as blowers, power-supply units, electromagnets, solid-state combination and coupling systems, and hardware, are purchased from world-wide suppliers. All visual designs are coordinated with their intended surroundings; there are no stock designs. Organs are completely assembled for rigorous testing and playing in preparation for on-time delivery.

The company resumed the construction of tracker-action instruments in 1961 after a lapse of about 55 years, producing 216 such organs since that date. By the end of 1998 the total output amounted to 3,775 organs of all sizes, and many of these have received enthusiastic testimonials from renowned recitalists over the years. Although sales were limited mainly to North America until World War II, Casavant organs now have been installed in churches, concert halls, and teaching institutions on five continents. The firm's largest instrument is a five-manual, 129-stop organ with two consoles installed in Broadway Baptist Church, Fort Worth, Texas, in 1996. The great majority of the very large instruments have been installed in locations in the United States; the exception is the four-manual, 75-stop organ in Jack Singer Concert Hall, Calgary Centre for the Performing Arts, in 1987. The company also engages in renovation projects and additions to existing organs.

The key personnel include Pierre Dionne, President and Chief Operating Officer (from 1978), formerly Dean of Administration at the Business School of the University of Montréal; Stanley Scheer, Vice-President (1984), formerly Professor of Music and Head of the Department of Fine Arts at Pfeiffer University, Misenheimer, North Carolina, holds a Master of Music degree in organ performance from Westminster Choir College, Princeton, New Jersey; Jean-Louis Coignet, Tonal Director (1981), a professionally trained physiologist with a doctorate from the Sorbonne, contributor to music journals, the most knowledgeable authority on the work of Cavaillé-Coll today, was formerly organ expert for the City of Paris; Jacquelin Rochette, Associate Tonal Director (1984), formerly Music Director of Chalmers-Wesley United Church, Québec City, holds a Master's degree in organ performance from Laval University, performs regularly on CBC radio, and has recorded works by several French composers for organ; Denis Blain, Technical Director (1986), with many years of practical experience in virtually all aspects of organbuilding, is in charge of research and development; Pierre Drouin, Chief Engineer, holds a Bachelor of Architecture degree from Laval University, introduced computer-assisted drafting, and supervises the design and layout of each organ. In 1998 the company had 85 full-time employees, many with more than 30 years of service with the company. All levels of management and production personnel function as a team.

Keates-Geissler Pipe Organs, Guelph, Ontario (1945)

The company was established in 1945 in London, Ontario, by Bert Keates (he came from England in his infancy) and relocated to Lucan, Ontario, in 1950. When it was incorporated in 1951 the assets of the Woodstock Pipe Organ Builders (formerly Karn-Warren) were purchased. The company moved to Acton, Ontario, in 1961, a more central location in the province. In 1969 the growing firm took over the business of the J. C. Hallman Company, a manufacturer of electronic instruments and pipe organs, when it discontinued making pipe organs (but not parts for them). For several years some organs were manufactured under the name of Keates-Hallman Pipe Organs.6 The company moved to Guelph, Ontario, in 1994.

Dieter Geissler was born in Dittelsdorf, Saxony, Germany, where he began his trade as a cabinetmaker. At the age of 14 he commenced his apprenticeship with Schuster & Sohn, Zitau, where he remained from 1946 to 1950. In 1951 he moved to Lübeck, West Germany, where he worked as a voicer with E. Kemper & Sohn for five years. In 1956 he moved to Canada to join Keates's staff. When Keates retired at the end of 1971 Dieter Geissler became president of the firm, which he purchased in 1972, and adopted the present company name in 1982. His son, Jens Geissler, joined the company in 1978.

Keates-Geissler organs are offered in all types of action and are custom built to any required size. Altogether, 147 new organs7 have been installed at locations in Canada, the United States (about 15), and Barbados, West Indies. The output includes a number of four- and five-manual instruments; the largest is a five-manual, 231-stop organ, installed in the First Baptist Church, Jackson, Mississippi, in 1992 (a compilation of its original 1939 E. M. Skinner instrument, a 1929 five-manual Casavant organ removed by Keates-Geissler in 1986 from the Royal York Hotel, Toronto, and some additional structures by the company). The firm has undertaken a substantial number of renovation, rebuilding, and reinstallation projects over the years, about 1,500 altogether, about 75 of these in the United States.

All wooden pipes are made in the factory, but metal pipes are made by Giesecke or Laukhuff in Germany to the company's scaling specifications; preliminary voicing is done in the factory before final voicing on-site. The windchests of electro-pneumatic instruments feature Pitman-chest action that includes some unique features to overcome the effects of extremes in temperature and humidity; the company is the only such manufacturer in Ontario and one of a few in Canada. Expandable electronic switching systems are designed and made in the factory from readily available components to facilitate replacement. Solid-state switching and multiple-memory combination actions are also manufactured. Console shells are handcrafted from solid wood in the factory; tracker touch is an available option. Keyboards are custom made to the company's specifications by Laukhuff, Germany, and blowers are acquired mainly from the same company. The company had four full-time employees in 1998; other part-time workers are hired as needed.  

Guilbault-Thérien, Saint-Hyacinthe, Québec (1946)

This company originated with the Providence Organ Company, established in Saint-Hyacinthe in 1946. The partners, André Guilbault, whose father Maurice Guilbault had worked for Casavant, and Guy Thérien, a voicer from Casavant, joined forces in 1968 when the elder Guilbault retired. The present company name was adopted in 1979. When André Guilbault retired in 1992, Alain Guilbault (no relation) acquired an interest in the company.

At the outset the company manufactured electro-pneumatic instruments, but built its first mechanical-action instrument (Opus #1 in a new series), a two-manual, 7-stop organ, in 1970, immediately followed by several small one- and two-manual instruments. From 1974 onward the typical instruments were medium-size, two-manual organs. Larger instruments of three or four manuals began to appear with greater frequency after 1983, the largest being a four-manual, 45-stop organ installed in Grace Church, White Plains, New York, in 1989, the only installation in the United States to that time. While the tonal layout of the organs is mainly inspired by European sources, mainly French, the swell divisions of the larger instruments are sufficiently versatile to handle symphonic literature.

The output of new organs was about 55 to 1998, mainly in Québec and Ontario. The company's work has also involved the restoration and reconstruction of a similar number of Québec organs, mainly by Casavant, but including some of historical significance that are over a hundred years old by such early builders as Napoléon Déry and Louis Mitchell. 

Several compact discs featuring performances by Québec organists on instruments manufactured by the company, or on reconstructed historical Casavant instruments, have been released in the past decade.8

Principal Pipe Organ Company, Woodstock, Ontario (1961)

The company was established by Chris Houthuyzen in Woodstock, Ontario, a town with a continuing tradition of organbuilding. The founder served his apprenticeship and received further training in The Netherlands before coming to Canada. Small to medium-sized instruments, employing electro-pneumatic action, are the company's specialty, with a contemporary emphasis on the guiding principles of Dutch organbuilding. A total of 119 installations have been completed over the years; the largest was a four-manual, 58-rank instrument. Wooden pipes are made in the shop, but most metal pipes come from suppliers in the United States; their scaling is dictated by the acoustics and intended use of the organ. Chests, reservoirs, ducting, consoles, and casework are manufactured on the premises. Much of the company's work involves rebuilding and maintaining organs, as well as the installation and servicing of church bells, including cast and electronic carillons on behalf of the Verdin Company, Cincinnati, Ohio. The company had three employees in 1998.

Gabriel Kney, London, Ontario (1962-1996)

Gabriel Kney was born in Speyer, Germany; his father was a master cabinetmaker and amateur bassoonist, and his mother was a singer. He served his apprenticeship in organbuilding with Paul Sattel in Speyer (1945-1951), where he assisted in the restoration of historic, sometimes war-damaged, instruments, along with new organ construction. Since the era was a time of transition from the "Romantic" style of organbuilding to the concepts of Orgelbewegung, this trend provided him with the opportunity to learn about and participate in the building of organs of both concepts. Concurrently he was a student of organ literature, liturgical music, harmony, and improvisation at The Institute of Church Music in the same city.

He emigrated to Canada in 1951 and joined the Keates Organ Company in Lucan, Ontario, as an organbuilder and voicer. In 1955 he was co-founder, with John Bright, of the Kney and Bright Organ Company in London, Ontario, with the intention of specializing in tracker instruments. The timing was premature, for only a few musicians and teaching institutions found such instruments of interest; with the exception of two teaching organs of tracker design supplied to a college in the United States, most of the early organs were requested to have electric key action. In 1962 Gabriel Kney established his own company in London, Ontario, where, with enlarged facilities and a staff of six to eight, he specialized in mechanical-action instruments. Organs from the period between 1962 and 1966 were designed in the historic manner of Werkprinzip, with organ pipes enclosed in a free-standing casework and separated into tonal sections. The tonal design of smaller instruments followed 18th-century North European practices, with some tuned in unequal temperaments of the period.

Altogether, his shops produced 128 organs since 1955; the largest in Canada being the four-manual, 71-stop, tracker-action instrument with two consoles in Roy Thomson Hall, Toronto. Since the early 1970s almost three-quarters of the installations were in locations in the United States, several of these in large universities. Occasionally maintenance and historic instrument restoration projects were undertaken.

Wooden pipes were made in the shop, with the exception of very large pipes made to specifications by suppliers in the United States, England, or Germany. Metal pipes also were made to order by independent pipemakers in Germany or Holland. Some console components, such as keyboards, were obtained from suppliers in the United States, England, or Germany. Electric switching devices came from the United States in earlier years, later from England. Blowers were imported from Laukhuff in Germany, Meidinger in Switzerland, or White in the United States. All casework and chest construction was done in the shop.

In 1996 Gabriel Kney retired from active organbuilding and closed his company. Since then he has acted as a consultant to churches seeking advice on organ purchase, restoration, and tonal redesign, and sometimes to other organbuilders.

Karl Wilhelm, Mont Saint-Hilaire, Québec (1966)

Karl Wilhelm was born in Lichtenthal, Rumania, and grew up in Weikersheim, Germany. At the age of 16 he entered apprenticeship with A. Laukhuff, Weikersheim (1952-1956), followed by working experience with W. E. Renkewitz, Nehren/Tübingen (1956-1957), and Metzler & Söhne, Dietikon, Switzerland (1957-1960). After moving to Canada, in 1960 he joined Casavant Frères, where he established the department and trained several employees for the production of modern mechanical organs; while there he was responsible for the design and manufacture of 26 organs. In 1966 he established his own firm, first in Saint-Hyacinthe, then moved to new facilities in Mont Saint-Hilaire, near Montréal, Québec, in 1974. For a while he was assisted by Hellmuth Wolff, now an independent builder (see below).

Karl Wilhelm specializes in building mechanical organs of all sizes, 147 to date, of which 69 are located in the United States and two in Seoul, Korea. Of the total output, 43 are one-manual instruments, 93 are two-manual instruments of medium size, and 11 are three-manual instruments--the largest is a 50-stop instrument in St. Andrew's Presbyterian Church, Toronto, installed in 1983. Two have detached consoles, and four have combination actions with electric stop-action; all instruments have mechanical key action. The design and layout of instruments adhere to the principles of the classical tradition of German and French organbuilding. Three-manual instruments feature a large swell division, suitable for the performance of Anglican Church music and the Romantic repertoire.

All wooden pipes are made on the premises, along with almost one-half of the metal pipes that are handmade of a tin-lead alloy; other metal pipes are imported from Germany. Scaling and voicing are done in the classical open-toe manner for natural speech and mellow blend. Windchests and bellows, consoles and action, and cases are manufactured in a 9,000 sq. ft. workshop. Organs may have cases of contemporary design, or perhaps are more ornate with moldings and hand-carved pipe shades that are compatible with the architecture of the location. Blowers are acquired from Laukhuff, Germany; miscellaneous parts come from other suppliers. The firm does not engage in rebuilding or renovation but services and tunes its own instruments throughout North America. In 1998 the firm had five employees, all trained by Karl Wilhelm.

Wolff & Associés, Laval, Québec (1968)

Hellmuth Wolff was born in Zurich, Switzerland. While a teenager he apprenticed with Metzler & Söhne, Dietikon, Switzerland (1953-1957); in his spare time he built his first organ, a four-stop positiv instrument. He received additional training with G. A. C. de Graff, Amsterdam (1958-1960) and with Rieger Orgelbau, Schwarzach, Austria (1960-1962). In the United States (1962-1963) he worked with Otto Hofmann, in Austin, Texas, and Charles Fisk, in Gloucester, Massachusetts. After moving to Canada he worked with Casavant Frères (1963-1965) in its newly established tracker-action department, and then with Karl Wilhelm (1966-1968), with whom he had worked at Casavant. In the interval 1965-1966 he returned briefly to Europe to work as a designer and voicer with Manufacture d'orgues Genève, in Geneva. Besides playing the piano and singing in choirs wherever he went, he completed his musical training by taking organ lessons with Win Dalm in Amsterdam and later with Bernard Lagacé in Montréal.

In 1968 he opened his own business in Laval, Québec, with one employee; his present associate, James Louder, started his apprenticeship with Hellmuth Wolff in 1974, after training in classical guitar and English. The first large project undertaken in that year was the construction of a three-manual, 26-stop instrument at the Church of St. John the Evangelist, New York City; this was one of the city's first modern tracker-action organs and it incorporated features not yet seen in North America. In 1977 the company moved to a new shop; the firm became incorporated in 1981, and James Louder became a partner in 1988.

Hellmuth Wolff has been part of the Organ Reform in North America since the movement came to this continent in the early 1960s. He specializes in mechanical-action instruments, large and small, whose design is inspired by French or German classical traditions, although other styles are represented that are designed to accommodate a wide range of organ literature. A total of 42 organs have been manufactured; about one-half of these were installed in locations in the United States. While a few small residence or practice instruments have been built, the majority are two-manual organs, in addition to eight three-manual organs, and one four-manual, 50-stop/70-rank instrument installed in Christ Church Cathedral, Indianapolis, Indiana, in 1989.9 Other related activities include rebuilding, restoration, and maintenance work, chiefly in the Montréal area.

Wooden pipes are made on the premises, while metal pipes are acquired from several pipemakers in Canada, U.S.A., and Europe; some reeds are made there, also. Windchests, consoles, and cases are also manufactured on site. Blowers are acquired from Meidinger and Laukhuff in Germany. Several installations feature both mechanical stop-action and capture systems; the first was built in 1977 for the Eighth Church of Christ, Scientist, in New York City; it was probably the first such system in North America. Both sequencers and traditional multilevel capture systems are used. There were eight employees in 1998.

Hellmuth Wolff, along with his associate, James Louder, have contributed to symposiums and written publications on organs and organbuilding.10 Fourteen compact discs, featuring performances by Canadian and American artists on Wolff instruments, have been released, and three others are in preparation.11

Brunzema Organs, Fergus, Ontario (1979-1992)

Gerhard Brunzema was born in Emden, Germany, and grew up in Menden on the Ruhr river, a northern part of the country where there was an abundance of historic organs. After World War II he apprenticed with Paul Ott in Göttingen and worked with him as a journeyman organbuilder (1948-1952). He received extensive technical training, including acoustics, at the Brunswick State Institute for Physics and Technology (1953-1954), and received a Master's degree in organbuilding in 1955. In 1953 he joined the prominent European organbuilder Jürgen Ahrend in the construction and restoration of organs, some in Holland and Germany of great historical significance; this association continued for 18 years. After emigrating to Canada he joined Casavant Frères in 1972 and served as artistic director until 1979; during that time he was responsible for the design of several notable organs in Canada, the United States, Japan, and Australia, along with the restoration of a number of historic Casavant instruments in Ontario and Québec. His experience at Casavant gave him the opportunity to work with very large organs, an experience that was lacking in Germany.

In 1979 he established his own business in Fergus, Ontario. Throughout his career he specialized mainly in small, one-manual, four-stop, continuo organs (25 in all); most of his nine two-manual instruments--the largest was 25 stops--were made between 1985 and 1987. In 1990 he was joined by his son, Friedrich, who had completed his apprenticeship in Europe. Until the time of his death in 1992, Gerhard Brunzema's total output amounted to 41 instruments; of these, 20 were installed in Canadian locations (mainly in eastern provinces), 17 in the United States, one in the Philippines, one in South Korea, and two in European countries. The tonal design of his instruments was strongly influenced by Schnitger organs that he had studied and restored while in Europe. He believed that basic organ design cannot be learned through restoration work, because such instruments were conceived by others; nevertheless, in restorations the intentions of the original builders should be respected. As for new instruments, his philosophy was that "An organbuilder should choose a style and stay with it, so that he not only continues to develop his own skills, but also continues to help improve the skills of the people working for him. . . . Become a master of one thing, get over the initial difficulties very quickly, and then polish your knowledge, the details of which will finally add up to a very good result."12

Koppejan Pipe Organs, Chilliwack, British Columbia (1979)

Adrian Koppejan was born in Veenendaal, Holland, and apprenticed with his father, who was an organbuilder there. He worked with Friedrich Weigle in Echterdingen by Stuttgart, Germany (1963-1966), with Pels & Van Leeuwen in Alkmaar, Holland (1968-1972) as shop foreman of the mechanical organ department, and with his father's company, Koppejan Pipe Organs, in Ederveen, Holland (1968-1972). He moved to Canada in 1974 and established his own company five years later.

Adrian Koppejan strives for a clear, warm, but not loud sound in his instruments, a preference inspired by classical organs of North Germany. This sound palette is reflected in the instruments in which he specializes: small and medium-size tracker instruments; he has built five electromechanical organs, as well. His output to date consists of 19 organs; these have been installed in churches and private residences in British Columbia, Alberta, and Washington state. His largest organ is a three-manual, 31-stop, electromechanical instrument, with a MIDI system, installed in the Good Shepherd Church, White Rock, B.C., in 1995. An instrument of similar size was constructed in 1998. Rebuilding, restoration, maintenance, and tuning are also part of regular activities.

Wooden pipes are mostly acquired from Laukhuff, Germany; metal pipes come from Stinkens in Holland and Laukhuff in Germany. Keyboards are made in Germany by Laukhuff or Heuss. Winding mechanisms, consoles, solid oak cabinets, and casework are manufactured in the shop. Blowers are supplied by Laukhuff, and electrical control systems come from Peterson in the U.S.A. There were two part-time employees in 1998 as Adrian Koppejan reduced the scope of his operations in anticipation of retirement.

Orgues Létourneau,  Saint-Hyacinthe, Québec (1979)

Fernand Létourneau was born in Saint-Hyacinthe, Québec, where he worked for while as a carpenter before entering employment with Casavant Frères in 1965; there he apprenticed with his uncle, Jean-Paul Létourneau, who was head reed voicer. He remained with the company for 14 years, where he was head voicer from 1975 to 1978, when he decided to set up his own independent company. First, with the help of a Canada Council grant, he embarked on an organ tour of Europe to study the voicing of old masters. Upon his return to Canada in 1978 he began building organs in Sainte-Rosalie, Québec, and became incorporated in 1979. His first organ, a two-manual, 6-stop instrument, was started in the basement of the family house and then displayed in the shop of a cabinetmaker; it was later acquired by the Conservatoire de Musique du Québec, Hull, where dozens of students have learned to play the organ on this small instrument. In 1984 he moved back to Saint-Hyacinthe, where three other organbuilders were already established. The factory's first building was formerly a municipal water-filter plant; the partially underground space provided a room 35 feet in height, ideal for erecting organs. A second industrial building was acquired recently to supplement the original premises.

A total of 55 organs of various sizes have been built to 1998; 13 others are in progress. The great majority have mechanical action, utilizing classical principles used in European instruments, and with the flexibility provided by ranks inspired by Dom Bédos, Schnitger, and Cavaillé-Coll. The largest will be a four-manual, 101-stop, mechanical-action instrument intended for the Francis Winspear Centre, Edmonton, Alberta. International distribution has been common from the outset, beginning with three early instruments that were installed in Australian locations in the early 1980s (the builder had become known on account of his activities as a voicer of Casavant instruments in that country). Others have been placed in New Zealand, Austria, England (Pembroke College, Oxford, 1995; an instrument is under construction for the Tower of London for completion in late 1999), the United States (over one-third of the total production), and Canada (chiefly eastern provinces, a few in the west). The company now has permanent representatives in the United States, England, and New Zealand. Fernand Létourneau prefers to build instruments of eclectic tonal design that are suitable for the performance of a wide range of organ literature. Historic restorations have also been undertaken.

All organ components, with the exception of electronics, are made in the factory, including wooden and metal pipes to 32-foot length, keyboards, consoles, and casework. Blowers are acquired from Laukhuff, Germany. Middle-size organs are equipped with electronic sequencers, card readers, and similar devices. The company is constantly engaged in rebuilding and restoring instruments of different vintages to original condition, about 50 to date, several of which have been designated as historical or heritage instruments. In 1998 there were 45 full-time staff in the Létourneau "family," of which a number are related to one another as father-son/daughter, uncle, brother, cousin, and husband-wife.  

         

R. E. Coleberd

R. E. Coleberd is a contributing editor to The Diapason.

Introduction

Pipe organ building in America today, as portrayed in the music media, is described exclusively as the crafting of new instruments, some with mechanical action and nearly all with carved or gilded cases. This is understandable given the news value of new instruments, but it is nonetheless unfortunate because it ignores a vital segment of organbuilding today: the restoration, rebuilding, refurbishing, updating, and modernizing of existing instruments as well as the building of new instruments from recycled and new material. This activity is primarily the work of individuals and small firms, unsung heroes in the spectrum of organbuilding today. Their work is especially important for two reasons: it speaks to the ongoing primacy of the King of Instruments as the time-honored musical medium in a house of worship, and the determination of congregations, recognizing this fact, to preserve and promote the pipe organ for present and future generations.
In 1966 the author published, in these pages, “The Place of the Small Builder in the American Organ Industry.” His comment that the independent builder “may well assume increasing importance in the future of the pipe organ and the organ industry”1 was perhaps prophetic of the situation today. In many ways this narrative is a continuation and update of that article. Forty years ago the pipe organ industry was dominated by the major builders, whose work accounted for 80% of the new instruments in a market where the discarding and replacement of older instruments was a major portion of the work. Today the situation is vastly different. The market is now only a shadow of its former self. Several major builders have folded, unable to continue under greatly diminished factory production; buyers have welcomed the electronic instrument amid drastically diminished mainline church membership and budgets; and the academic market, with certain notable exceptions, is gone because colleges and universities are market-driven and direct capital resources to enrollment demand.
Yet, organbuilding continues, and pipe organs will always be built in this country and the world over. An important segment of this effort, now demanding recognition, is the work of talented individuals, working alone and in collaboration with other artisans, to craft instruments of singular artistic merit in accordance with public recognition today that a pipe organ is a work of art and the work of an artist. In a statement in 1966 prophetic of the situation today, Robert J. Reich, founder and now retired president of the Andover Organ Company, an early participant in the tracker organ revival in America, stated his philosophy of organbuilding as “the craftsman’s approach to construction and the musician’s approach to tone.”2 Musical interest and skill begin early and often with other instruments, while craftsmanship is acquired through formal and informal training.
This article describes the career of D. Steuart Goodwin: the experiences and individuals who shaped his philosophy of organbuilding, details of several instruments in his opus list, and his contemporary voicing and tonal finishing assignments. Steuart has won the admiration and respect of organ committees, organists, and builders as evidenced by his assignments across the country. Jack Bethards, president of Schoenstein Organbuilders, calls Goodwin a genius:

There is no other way to explain his brilliance in so many fields. Steuart combines the well-honed skill of a master craftsman with the cultivated taste and sensitivity of a fine artist. He has a real gift for design both visual and tonal. He is a musician through and through. His touch with pipes is magical. With ease and efficiency, he can bring the best musical quality out of just about any set of pipes.3

Said Manuel Rosales of Rosales Organbuilders:

My friend and colleague Steuart Goodwin is a rare individual, whose organ building talents combine great skill, good taste, and economy of resources. He is equally at home with visual design, tonal finishing, and hands-on organbuilding. His love of the craft is exemplified by the warm and inviting sounds of his new instruments and many revoicing projects. He and his work continue to be a source of personal and professional inspiration for me, his coworkers, and his clients.4

Early life and education

Donald Steuart Goodwin, Jr. was born on April 9, 1942 in Riverside, California, the son of a building contractor who sang in college musical productions, and a sometime public school teacher and housewife who taught piano privately.5 His grandfather, Phillip Goodwin, taught violin in Redlands, California, and played in a string quartet. Steuart’s folks met at the University of Redlands, a Baptist liberal arts college long known for its fine musical program. Arthur Poister taught organ there in the 1920s when a celebrated four-manual, 54-rank Casavant organ, recently restored and updated, was installed in Memorial Chapel. The organ program at Redlands is primarily associated with Leslie Spelman (1903–2000), a nationally known teacher and pedagogue who joined the faculty in 1937.6
Steuart’s musical interests began early; his 96-year-old mother recalls that he could carry a tune at the age of two. He began cornet lessons in the fourth grade and enrolled in the band at Lincoln School in Riverside. He recalls as a youngster asking his mother about the Estey pipe organ in the family’s Methodist church, but what really turned him on was when, at the age of fourteen, he and his father saw Disney’s 20,000 Leagues under the Sea and heard Captain Nemo play Bach’s Toccata and Fugue in D minor. “I went home and played my older sister Jane’s recording over and over, checked out books at the library on organbuilding, and from that time on I was permanently ‘hooked’,” he says.7
Eager to study organ, Steuart approached Roberta Bitgood, organist at Calvary Presbyterian Church in Riverside, who had studied organ with Clarence Dickinson and who was later national president of the AGO. She suggested he begin with a year of piano instruction, which he did, before studying with her for two years, in the 11th and 12th grades.8 While in high school, his future organbuilding career began when he installed a three-rank Robert Morton theatre organ in his family’s garage. His theatre organ interest continued and became part of his work.
In 1959 he matriculated in the music program at the University of Redlands, majoring in composition under Wayne Bohrnstedt, having already written two chorale preludes for organ and a sonata for woodwind quintet. He sang in the University Choir his freshman year and played in the concert band all four years. In 1961, his sophomore year, he won the $800 first prize in the Forest Lawn Foundation Writing Awards Contest with an essay entitled, “The Organ Builder Finds His Place.”9 During Goodwin’s junior year, the band director persuaded three trumpeters to switch to French horn, which was a wise move for Steuart as he went on to play horn for 13 seasons in the University-Community Symphony—until it was converted to all union professionals.10 In recent years he has played French horn in a woodwind quintet and in the Redlands Fourth of July Band.
Goodwin studied organ at Redlands with Raymond Boese (1924–1988), who came to Redlands in 1961 to join his former teacher and now colleague Leslie Spelman in the music department.11 By his junior year, Steuart had become dissatisfied with the Wicks, Harry Hall (New Haven), and Robert Morton practice organs on campus, all dated and woefully inadequate for modern pedagogy and performance. He convinced the school that they needed a tracker instrument, having been listening avidly to recordings by E. Power Biggs playing and narrating tracker organs in Europe. Scouring classified ads in The Diapason, he found an 1870s George Stevens (Cambridge) instrument for sale by Nelson Barden.12 After months of negotiating with school officials, the parties reached an agreement, whereby the school would pay for the instrument and shipping, and Goodwin would install it in Watchorn Hall. In gratitude for this effort, the school awarded him three credits toward graduation.13 Steuart’s senior recital at Redlands, featuring his own compositions, included a Trio for horn, violin and piano, a Quintet for woodwinds, a Sonata for organ, and a Suite for brass.14 He graduated with a bachelor’s degree in music in 1964.
During this period he built a small organ with paper pipes on which he could play a Haydn clock piece (see photos). Then, in a remarkable coincidence, E. Power Biggs played a recital on the Casavant in the Redlands chapel. Goodwin showed him the paper-pipes organ, and Biggs, unprompted, played that particular Haydn piece on it. Recognizing Steuart’s interest and promise, Biggs suggested that he apply for a Fulbright scholarship to study organbuilding in Europe. In his letter of recommendation to the Institute of International Education, Biggs wrote:

Steuart Goodwin has the possibly-unusual wish to study organ building in Europe, preferably in the center of fine organs, old and new, which is Holland. . . . I cannot think of anyone who would be more qualified for a Fulbright grant than Steuart Goodwin, nor anyone who could make better use of the opportunity. Already at Redlands he has proved his theoretical grasp of the subject, and his ability to transform ideas into action, and practical results.”15

The choice for the Fulbright year abroad for Goodwin, 1964–65, was between Flentrop and von Beckerath. He chose Flentrop because most Hollanders speak English, and his German was very limited. His experience was mixed, probably unlike that of most Fulbright scholars, he comments. He was assigned to the pipe shop where he acquired pipemaking skills, but he had a brief run-in with Mr. Flentrop. Inadvertently interrupting a conference while trying to introduce himself, he was subsequently ushered into the maestro’s office and severely scolded. “If we had been Germans you would have been thrown out immediately,” Flentrop said, adding, “you can stay here if you will simply work in the pipe shop and keep quiet. Try to observe the Dutch boys and behave as they do.”16 This meant never asking questions—asking questions was unheard of for an apprentice. He was never allowed to see the company woodworking shop in Koog an de Zaan. He did, however, make several sets of pipes for the Rugwerk division of the large four-manual Flentrop instrument in St. Mark’s Episcopal Cathedral in Seattle.
At the end of his Flentrop sojourn, Goodwin met with Dr. Martin Vente, internationally renowned organ historian and scholar, who provided him with a map locating important Dutch organs nearby. He spent several days traveling by train and bicycle to see many of them. The one that deeply impressed him and would greatly influence his emerging tonal philosophy and mark his work today was at the Oude Kerk in Amsterdam, ironically dismissed by Flentrop as too romantic.17 “I suffered something of a cognitive dissonance over this, since Flentrop represented the Neo-Baroque ideal espoused by Biggs,” Steuart comments. “I was supposed to like the Baroque, but found myself more deeply moved by the 19th-century voluptuousness of this instrument.”18
Returning from Holland, he opened a small shop in San Bernardino, soon welcoming an opportunity to move to a larger, well-equipped facility nearby, the former Fletcher Planing Mill, whose owner was retiring. There he built three small tracker organs and rebuilt two. Opus 1, a six-rank, two-manual tracker for the Fine Arts building at the University of Redlands, was originally purchased by the organ professor, Raymond Boese. He sold his interest to the university, which paid Steuart a nominal sum and traded him the Hall and Morton instruments. The stoplist comprised a Gemshorn 8' and Principal 2' on Manual I, a Gedeckt 8' and Rohrflute 4' on Manual II, and a 16' Bourdon and 4' Choral Bass on the Pedal, plus the usual couplers. His Opus 2, 1972, was an 11-rank, two-manual tracker for the Fourth Ward Mormon Church in Riverside. In 1973 he built Opus 3, a one-manual, four-rank rental organ. This instrument was used at the Memorial Chapel, University of Redlands, for the Feast of Lights one year, and has been rented by the Ambassador Auditorium and by the Los Angeles Philharmonic and Chamber Orchestras for use in the Dorothy Chandler Pavilion and Hollywood Bowl. It is now in a home in Altadena.19 Reflecting on Opus 1 and 2, he describes this period as his Biggs, Flentrop, Schlicker days and says:

In each of these first two small organs there was to be only one independent eight-foot rank on the Great. It needed to work as an accompanimental sound as well as the foundation for a small principal chorus. At St. Bavo in Holland, I had heard an unforgettably warm tapered hybrid stop called ‘Barpijp,’ which inspired me to use a Gemshorn instead of a less flexible Principal or Stopped Flute. I experimented with using Gemshorns in a Swell division, but soon grew out of that and came to greatly prefer real string tone.20

During this long period of apprenticeship including travel, reading, talking with organists and organbuilders, and perhaps most importantly listening—to records and instruments—his philosophy of organbuilding and tonal ideals were taking shape, and he made certain fundamental decisions about the direction of his emerging career. He determined that he wanted to work individually, expressing his own artistic concepts, free from the constraints of established large builders where opinions differ, compromises are often the rule, and mimicking some academic paradigm or current fashion is required. His primary goal became to achieve “a certain populist sensibility when it comes to providing what will please congregations and audiences.”21 “Many times I have wondered whether to stay [in Redlands], but if I were to work for a nationally known organ builder, I would lose the independence I have here,” he told the San Bernardino Sun-Telegram in 1978.22 And as he told columnist Nelda Stuck of the Redlands Daily Facts in 1987, “There is no area of music I can think of where there are so many factions and arguments about style,” referring to Baroque vs. Romantic pipe organs and tracker vs. electro-pneumatic action.23

Trinity Episcopal Church

Opus 4, an instrument in which he takes particular pride, illustrates the scope of Goodwin’s early work and evidences his talents in voicing and case designs: the 35-rank, 31 speaking stops, three-manual tracker in Trinity Episcopal Church, Redlands, California. Originally built in 1853 by the prominent New York City builder George Jardine for the First Presbyterian Church in Rome, New York, it was acquired by St. Michael’s Ukrainian Catholic Church in Rome in 1908, where it was rebuilt by C. E. Morey of Utica, New York. Meanwhile, Trinity Church in Redlands installed a three-manual Austin, Opus 111, in 1904.24
The Jardine-Morey organ was acquired through the Organ Clearing House, and over a period of 19 months was rebuilt, together with parts of the Austin, as an eclectic instrument combining 802 original and 838 new pipes for a total of 1640 (see 1975 stoplist). This project illustrates the amalgamation of older and new material into an instrument of singular artistic merit. Through a vision of what these two instruments together could and should be, Goodwin was able to “see” how the skilful blending of solo and foundation stops would produce vibrant and colorful choruses and ensembles. This organ fulfills Goodwin’s conviction that there has to be a visual-sonic relationship, i.e., a relationship between what you see and what you hear (see photos). “A pipe organ should be capable of choruses, amalgams of many tones from many pipes, producing a rich, subtly infused musical statement,” he told Dennis Tristram, a reporter for the Riverside Daily Press newspaper.25
In an arched nave opening three lancet arches were formed of oak and filled with 15 newly painted and stenciled dummy pipes retained from the Austin façade. Trinity Church has been described as an example of 19th-century Anglo-American architecture, which led to the chancel case design that Steuart based on the case at Peterborough Cathedral in England designed by Arthur George Hill (1857–1923), described as one of the great Victorian organ builders.26
During the construction of this organ Steuart joined the choir, and ultimately became confirmed as a member of the church. This has provided an unusual opportunity for the builder to repeatedly update and modify the instrument over many years, both tonally and mechanically. The large single bellows was replaced a number of years ago with individual regulators for each division, resulting in steadier wind and the possibility of divisional tremulants. More recently electric stop and combination actions were installed, several ranks were added and others moved around, giving the organ more scope and a more English flavor (see 2004 stoplist).

Tonal evolution

Goodwin’s work is especially noteworthy because it represents the crafting of instruments embracing the required resources in tonal families and pitches capable of performing the great music of antiquity as well as today’s requirements, but one that is free from the strident and narrow definitions of Baroque, Neo-Baroque, North German, South German, or American Classic stoplists, scales, wind pressures, and voicing. These eclectic instruments, beginning with the work of individual artisans and small shops, have influenced a new style of organs, free from the prejudices against stops that in the 1950s were considered “old hat” and indicative of an obsolete organ that should be replaced. Formerly verboten stops—the Melodia, Cornopean, Harmonic Flute, and Vox Humana, for example—are now recognized for their intrinsic musical content and are often embraced without hesitation by many builders who incorporate them in their instruments, confident of their ongoing musical value. This approach extends to the use of wooden flue work and open flutes, a defining characteristic of American organbuilding from the very beginning, but largely eschewed in the 1950s in favor of metal ranks and tapered, half-tapered, stopped, and chimneyed stops.
Steuart’s Opus 5 was a restoration for St. Mark’s Episcopal Church in Upland, California, of E. & G. G. Hook & Hastings’ Opus 734, 1873, formerly located in the First Baptist Church in Bloomington, Illinois. Opus 6 is a four-rank, two-manual house organ, featuring an ornate case and suspended action (see photo).27 This is an early example of an elaborate 18th-century case as built by the Dutch and Germans and pioneered by John Brombaugh in America at a time when the European builders were building modern cases in this country. In 1978, in a brief detour from mechanical action, Steuart built a two-manual, six-rank unit organ with electric action for the United Methodist Church in Yucaipa, California. “I never built another unit organ for a church,” he comments. “I am enthusiastic about the unit principle for a theatre organ, but you can easily overdo it in church work if you are concerned about good tone.”28
In 1978, David Dixon, who met Manuel Rosales at Schlicker in Buffalo and who became his partner in Los Angeles (and who later returned to Schlicker before his untimely death at an early age), approached Steuart about working for them, which he elected to do. He assisted in their introduction to tracker work, in designing cases, traded organ philosophy with Manuel, and acquired some refinements in voicing technique from Dixon.
Opus 8, a 13-rank, two-manual electropneumatic action organ for the First Baptist Church in Colton, California in 1979, marked a major milestone in Goodwin’s tonal philosophy, and contains elements that characterize his later work. In earlier years he was interested in tracker action, but over time came to believe that even 11 ranks (Opus 2, Fourth Ward Chapel, L.D.S. Church, Riverside) in a tracker aren’t very flexible. He became convinced of the value of a unit Gedeckt stop, which he first used in Colton and subsequently on several 12- or 13-rank instruments (see stoplists for Colton and St. George’s Episcopal Church). He began searching for a small, flexible church organ design, and the unit Gedeckt was part of the answer. “I hit upon it almost by accident while contemplating for Colton how to best use a couple of pitman chests incorporating one unit chest,”29 he comments, adding:
“The concept begins, as usual, with a complete principal chorus, 8' through mixture, on the Great. Next, on the Swell, I use a pair of strings (real string tone, not hybrids), a medium-bright Trumpet, and (where space and finances permit) a 4' Principal or Fugara. Budgetary concerns generally limit independent pedal ranks to the ubiquitous 16' Bourdon. The Great also contains an open metal flute, which, in the Colton prototype, was originally part of an Aeolian house organ. The pipes looked ridiculous to one brought up on Neo-Baroque ideals. The heavily nicked mouths were cut-up two-thirds in a half circle, and, yet, when you blew on them they were magically beautiful. I began to realize that you couldn’t depend on what other people said was good, you had to trust your own ears.
“The 85 to 97 pipes of a Lieblich Gedeckt are located on a unit chest in the Swell box. This rank is made available at three pitches on the Great, six on the Swell, and four to six pitches on the Pedal. Importantly, the Gedeckt stop tabs on each division are grouped together to the right of the straight stops and couplers, and they are not affected by the couplers.
“This arrangement makes the structure of the tonal design quickly apparent to an organist, while simultaneously making registration practically goof-proof. For instance, it is impossible to mix the derived mutations on the Swell with the principal chorus on the Great. I settled on the Lieblich Gedeckt for the one unified rank because it blends well at all pitches and because the pitch-beats caused by an equal-tempered rank used at mutation pitches are only barely discernible.
“In an organ of only 12 or 13 ranks, one can make dozens of useful combinations and build ensembles suggesting a much larger instrument. For instance, on the Pedal the 51⁄3' through 2' pitches—when used with the Great chorus coupled—reinforce the 16' line and create the impression that there is a Pedal mixture. A solo Cornet effect can be registered as follows: couple the string and celeste to the Great and silence them on the Swell using the Unison Off. Then set a solo combination of Gedeckt pitches such as 8', 4', 22⁄3' and 13⁄5' on the Swell (tremulant optional).
“The point of all this is to provide excellent sound and unusual flexibility in a small church organ design. To keep these organs even more affordable, we incorporate many used parts and pipes. A brand new console shell is hardly a necessity when so many are available used. I like to put the money where it counts the most—in careful voicing and tonal finishing, new electronic relays, and high quality visual designs.”30
The discovery of the Aeolian open metal flute, quixotically called Flute Piano (apparently for people barely musical and certainly not organists) was to mark a milestone in Goodwin’s career. Placed in the Great of his instrument in Colton, it proved to be of such great value as both a solo and ensemble stop that it led him to incorporate 8¢ open flutes on that division routinely. Most instruments, having a Chimney Flute on the Great and Gedeckt on the Swell, don’t have the flexibility of an open 8' flute, an important color in his judgment, adding, “I voice it quietly in the bass and midrange and somewhat ascendant from middle C up so one rank can be used three ways: as an accompaniment stop in the left hand, a solo stop in the treble and a lighter foundation than a Diapason in a Principal chorus.”31
Perhaps the most impressive example is found at Holy Cross Church in Santa Cruz, California. Built in 1889 on the site of one of the famous Spanish Missions, Holy Cross is an imposing neo-Gothic brick building with splendid acoustics. Starting with a 13-rank A. B. Felgemaker tracker obtained through Alan Laufman and the Organ Clearing House, Goodwin added 10 ranks including an open metal flute, two mixtures, two chorus reeds and a string celeste (see before and after stoplists above right, and photo on page 28).
In 1995, Steuart installed his Opus 15, a remarkably cohesive two-manual and pedal organ of 12 ranks, featuring the unit Gedeckt and the 8' open flute discussed above in St. George’s Episcopal Church, Riverside (see stoplist on page 26, and photo left). The striking white oak case is accented with bronze moldings and padouk wood stripes.32

Voicing and tonal finishing

In 1980 Steuart became associated with the Schoenstein firm in San Francisco, which marked still another chapter in his career, one that would grow and distinguish his work today. He worked closely with Jack Bethards, Schoenstein president, in the major renovation of the epic Aeolian-Skinner organ in the Mormon Tabernacle in Salt Lake City, where he did most of the flue voicing. Bethards does extensive consulting coast-to-coast, and when he concludes that the major problem with an organ is inferior tonal work, he often recommends Steuart, who, working with his assistant Wendell Ballantyne, has had nationwide assignments: New York, Georgia, Texas, and North Carolina. Reworking an older instrument almost always begins with a sensitive new organist, and one job leads to another. This work typically involves removing sizzle and chiff, increasing foundation tone, repitching a mixture with new breaks, and replacing unsuitable pipes. With his fine reputation as a voicer and finisher, when prospects hear his work, they want the same thing. For example, Steuart’s current work at the Covenant Presbyterian Church in Charlotte, North Carolina, is the direct result of his work at Myers Park Baptist Church there. Goodwin’s recent theatre work includes voicing, in collaboration with Lynn Larsen, a large theatre and romantic instrument in the home of Adrian Phillips in Phoenix, Arizona, and completing a mostly seven-rank Wurlitzer organ in his own home in Highland. His much admired tonal work on the epic four-manual, 26-rank Wurlitzer in Plummer Auditorium, Fullerton, led to his election to the governing board of the Orange County Theatre Organ Society.33

Summary

In a varied career marked by many accomplishments, Steuart Goodwin represents the individual organbuilder, working alone or in collaboration with others, a vital segment in the spectrum of organbuilding in America today. Long neglected but deserving of greater recognition, the work of these persons may well assume greater significance in the future of the trade and the instrument. Beginning with a rich musical background, often both instrumental and vocal, which continues, they acquire the knowledge and skills of building the pipe organ through travel, reading, observation and apprenticeship. In their deep commitment to the King of Instruments, they gladly sacrifice more lucrative occupations. Today and tomorrow, amid the manifold and far-reaching changes in our culture, the majestic pipe organ is recognized as a work of art and the work of an artist. There can be no better example of this truth than the life and work of Steuart Goodwin.
 

Steuart Goodwin & Co. Opus List

1. 1970. Two-manual, six-rank tracker practice organ. Now in home of Dr. Harold Knight in Dallas, Texas.
2. 1972. Two-manual, 11-rank tracker, 4th Ward, Church of Jesus Christ of Latter-day Saints, Riverside, California.
3. 1974. One-manual, four-rank portable rental organ. Now in home of Bruce and Mary Elgin, Altadena, California.
4. 1976. Three-manual, 35-rank tracker, Trinity Episcopal Church, Redlands, California. With components of an 1852 Jardine from Rome, New York, obtained through the Organ Clearing House.
5. 1977. Two-manual, 17-rank tracker, St. Mark’s Episcopal Church, Upland, California. Rebuild of E. & G. G. Hook & Hastings #734, 1873, obtained through the Organ Clearing House.
6. 1978. Two-manual, four-rank practice organ in the home of Frances Olson, Mount Baldy Village, California.
7. 1978. Two-manual, six-rank unit organ, now in St. John’s Episcopal Church, Corona, California.
8. 1979. Two-manual, 13-rank electro-pneumatic, First Baptist Church, Colton, California.
9. 1984. Two-manual, 13-rank tracker, Our Lady of the Rosary Cathedral, San Bernardino, California. Rebuild of Moller #1701, 1913, obtained through the Organ Clearing House.
10. 1988. Two-manual, 23-rank tracker, Holy Cross Church, Santa Cruz, California. Based on A. B. Felgemaker #506, 1889, enlarged and considerably modified visually and tonally.
11. 1991. Two-manual, 11-rank, electric action, Stake Center, Church of Jesus Christ of Latter-day Saints, Simi Valley, California. Incorporates many pipes and parts of Moller #5482, 1928, obtained through the Organ Clearing House.
12. 1992. Two-manual, 13-rank electro-pneumatic, Fontana Community Church, Fontana, California. Incorporates console and many pipes from the church’s 1920s Spencer organ.
13. 1993. Three-manual, 38-rank, electric slider chests, First Christian Church, Pomona, California. Extensive tonal revisions. Based on Hook & Hastings #2240 with prior modifications and additions by Ken Simpson and Abbott & Sieker.
14. 1995. Two-manual, 19-rank, electric and electro-pneumatic, St. Timothy Lutheran Church, Lakewood, California.
15. 1995. Two-manual, 12-rank, electro-pneumatic, St. George’s Episcopal Church, Riverside, California.

Other work

The tonal finishing team of Steuart Goodwin and Wendell Ballantyne has done extensive work on organs in California, Georgia, North Carolina, New York, Texas and Utah.
Steuart has worked on many case design and voicing projects with Rosales Organbuilders and Schoenstein & Co. For photographs and details visit .
For research input and critical comments on earlier drafts of this paper, the author gratefully acknowledges: Edward Ballantyne, Jack Bethards, Ken W. List, Albert Neutel, Donald Olson, Michael Quimby, Robert Reich, Manuel Rosales, Jack Sievert, and R. E. Wagner.