Cover feature

Parkey OrganBuilders,
Duluth, Georgia
Opus 11, First Presbyterian Church, Gainesville, Georgia
Our first conversations with Michael Henry, director of music for First Presbyterian Church, Gainesville, Georgia, took place in early 2007. At that time, the church had a two-manual, 23-rank Möller organ installed in 1975. Our discussions revolved around the mechanical condition of the Möller and the limitations of the tonal design. The church knew that work was imminent for the Möller in order to maintain reliability. As usual, funding remained an issue.
In mid-2008, Joseph S. Hatfield, a local business owner and church member, made provisions for a large bequest shortly before he passed away. This meant that the budget actually became larger than originally projected, and the discussions expanded to replacement of the Möller organ. The planning process broadened to include a consultant, James Mellichamp, Vice-President of Academic Affairs and organ professor of Piedmont College in Demorest, Georgia.
The original organ was a product of the neo-baroque influence and presented many challenges for use in church services. Our collaboration with Dr. Mellichamp produced a new three-manual and pedal specification of 40 ranks. The specification was designed to provide a more comprehensive instrument for choral accompaniment, congregational hymns, and an expansive list of organ literature.
The new organ incorporates two enclosed divisions—Swell and Choir. The Great and main Pedal stops remain unenclosed. Secondary Pedal stops are drawn from the Swell and Choir divisions, offering options for enclosed Pedal. The organ offers a tremendous level of independent stops, with very minimal unification. Three principal choruses are available. The primary principal chorus is located in the Great division, with a secondary principal chorus located in the Choir division. The Pedal division also features its own independent chorus from 16′ pitch to Mixture. The organ retains some of the flutes and strings from the previous Möller. These stops were rescaled and revoiced for new locations and pitches. We then completed the complement of flutes. Along with new strings in the Swell division, a secondary string and celeste stop were added to the Choir division.
The Great division is more eclectic than our previous designs. The principals are generously scaled, with the foundation pitch focused on the 8′ rather than the 4′ pitch as in the previous organ. The principals offer a warm body of sound, with a clear articulation and singing character to provide an excellent backbone for congregational singing. The 8′ and 4′ flutes offer a nice complement to the principals, while providing good color on their own. The 8′ and 4′ flutes also provide the foundation for a complete French flute Cornet décomposé. The Great Trompete is of German design, so while powerful it allows for a good blend with the principal chorus for ensemble use.
The Swell division is conceived as a French-based design, including the use of harmonic flutes at 4′ and 2′ pitches. The Trompette is fiery and is complemented by the 16′ Basson and 8′ Oboe. The commanding presence of the 8′ Trompette in the space did not require a 4′ reed. The foundations are drawn from the 8′ Viola and 8′ Chimney Flute, with the focus of the chorus from the 4′ Principal. Our use of violas helps to reinforce the 8′ foundation in a division that does not contain separate principal or diapason tone. Our violas provide a slightly more weighted sound, yet retain the sonority of string tone. The 4′ Harmonic Flute and 2′ Octavin (Harmonic Piccolo) provide a soaring intensity for the Swell division and tie in well to the Plein Jeu IV. The swell box construction features our own sound-insulated, double-wall design for excellent expression, providing a much greater effect than the previous Möller swell box.
The Choir division offers the versatility of an English Choir, while blending some of the options for sounds of a Positiv. The Choir features the same style of expression box construction as the Swell division. An 8′ Violin Diapason is our starting point for the Choir division. The 8′ Violin Diapason and 4′ Violin Principal were conceived to provide some of the missing sounds from the old organ. First Presbyterian has long enjoyed the presence of a strong choral ministry, with an expansive repertoire of anthems and oratorios from the Baroque period to the contemporary era. The shortcomings in choral support and expressiveness of the Möller organ were the main considerations and concerns of the organ committee. The principals and the inclusion of an 8′ Dulciana and 8′ Unda Maris add a new dimension of options and sound that the organist never had in the old organ. The 2′ Principal and 11⁄3′ Quint add the final clarity to the Choir division with sparkling elegance. The 8′ Schalmei provides a pleasant crossover between a small ensemble reed and a light solo reed.
The Pedal division provides more than ample undergirding for the entire organ. A new polished façade comprises the Pedal 16′ Principal and 8′ Octave as well as the bass of the Great 8′ Principal. The division hosts an independent 16′ Subbass, 4′ Choral Bass, 4′ Nachthorn, Mixture III, and 16′ Posaune. After our discussions with the consultant, we provided both a 32′ Resultant and a derived 32′ Cornet from the tonal resources. Both offer that extra level of depth in the pedal line between soft and full registrations.
During the construction of an organ at Parkey OrganBuilders, it is our goal to provide a cohesive musical instrument. While adopting influences and ideas from many of the schools of organ construction, the specification nomenclature and the tonal finishing reflect the solidity of American organbuilding. One of the best compliments we receive regularly is that “stops blend beautifully and do what they are supposed to do.” Much care is given to the scaling of each stop as it relates to its solo and ensemble needs. All of our instruments are carefully finished in their space at completion of the installation.
When tracker action is not an option, our firm elects to use electro-pneumatic action in slider, unit, and pitman variations. Winding systems are always regulated via wedge or box reservoirs for optimal control, yet allowing for a gentle wind flex to prevent a sterile sound. Our operation in Duluth, Georgia is one of the largest facilities in the southeastern United States dedicated solely to the construction of pipe organs. Our use of modern-day technology—including CAD (computer-aided design), Photoshop, and CNC (computer numerically controlled) machinery—allows us to create organs with artistic flair, established mechanical designs, and high levels of accuracy. Our staff is involved with the creation of the organ from paper to final installation. Custom consoles, casework, windchests, wooden pipework, and winding systems are all constructed in our Duluth location.
The console for Opus 11 is constructed in a solid walnut case with burled walnut veneers as well as maple, mahogany, and ebony. The console features turned wooden drawknobs in ebony with maple faces. Engravings provided throughout are laser-engraved in our shop. Custom English keyboards feature bleached bone naturals with ebony sharps. Our ergonomic designs for console construction are based on AGO standards to provide a comfortable familiarity for the organist. Solid State Organ Systems are used for capture, relay, and MIDI and are known the world over for their reliability and intuitive designs for the organist.
We appreciate the cooperation of Michael Henry and the staff and members of First Presbyterian Church, Gainesville, Georgia. The church has made a conscious effort already on three occasions to involve children and youth in the organ project through the removal of the original pipework, an excursion to our shop to view the new organ through assembly, and a hands-on “bringing in the pipes” event for celebratory installation of the first pipes on Epiphany. We also thank James Mellichamp for his direction and cooperative collaboration in this instrument. The end results have provided a substantial experience in both sight and sound. Instruments of this caliber continue to provide enthusiasm and excitement for our staff. The dedicatory recital is scheduled for April 18, 2010, and will be performed by Dr. Mellichamp. First Presbyterian Church appreciates the generosity of Mr. and Mrs. Joseph S. Hatfield, who made this project a reality.
—Phillip K. Parkey
President and Tonal Director
Parkey OrganBuilders

Parkey OrganBuilders
Staff listing, Opus 11
Tonal design and finishing: Phillip Parkey
Mechanical engineering and visual design, installation: Michael Morris
CNC operations for console, structure, windchest construction winding systems and installation: Philip Read, Josh Okeson
Console and relay wiring, installation: Doug Rogers
Chest actions, wiring, winding, assembly, installation: Otilia Gamboa
Office manager and installation: Josh Duncan
Voicing and tonal finishing, installation: Kenny Lewis

Parkey OrganBuilders, Opus 11
First Presbyterian Church,
Gainesville, Georgia

GREAT (Unenclosed)
16′ Bourdon Swell
8′ Principal 61 pipes
8′ Metal Gedackt 61 pipes
4′ Octave 61 pipes
4′ Spitz Flute 61 pipes
22⁄3′ Nazard 61 pipes
2′ Tapered Flute 61 pipes
13⁄5′ Tierce 61 pipes
11⁄3′ Mixture IV 244 pipes
8′ Trompete 61 pipes
8′ Fanfare Trumpet Prepared for
Tremolo
Zimbelstern

SWELL (Enclosed)
16′ Bourdon 12 pipes
8′ Chimney Flute 61 pipes
8′ Viola 61 pipes
8′ Viola Celeste GG 54 pipes
4′ Principal 61 pipes
4′ Harmonic Flute 61 pipes
2′ Octavin 61 pipes
1′ Plein Jeu IV 244 pipes
16′ Bassoon 12 pipes
8′ Trompette 61 pipes
8′ Oboe 61 pipes
Tremolo
Swell 16
Swell Unison Off
Swell 4

CHOIR (Enclosed)
8′ Violin Diapason 61 pipes
8′ Gedeckt 61 pipes
8′ Dulciana 61 pipes
8′ Unda Maris TC 49 pipes
4′ Violin Principal 61 pipes
2′ Principal 61 pipes
11⁄3′ Quint 61 pipes
8′ Schalmei 61 pipes
8′ Fanfare Trumpet Great
(Uncoupled)
Tremolo
Choir 16
Choir Unison Off
Choir 4

PEDAL
32′ Resultant 32 notes
16′ Principal 32 pipes
16′ Subbass 32 pipes
16′ Bourdon Swell
8′ Octave 12 pipes
8′ Bass Flute 12 pipes
4′ Choral Bass 32 pipes
4′ Nachthorn 32 pipes
2′ Mixture III 96 pipes
32′ Cornet V 32 notes
16′ Posaune 32 pipes
16′ Bassoon Swell
8′ Trompete 12 pipes
4′ Schalmei Choir
8′ Fanfare Trumpet Great

Couplers
Great to Pedal 8
Great to Pedal 4
Swell to Pedal 8
Swell to Pedal 4
Choir to Pedal 8
Choir to Pedal 4

Swell to Great 16
Swell to Great 8
Swell to Great 4
Choir to Great 16
Choir to Great 8
Choir to Great 4

Swell to Choir 16
Swell to Choir 8
Swell to Choir 4

MIDI on Swell
MIDI on Great
MIDI on Choir
MIDI on Pedal

Great/Choir transfer

Capture System
(100 levels of memory)
10 general pistons, thumb and toe
6 divisional pistons, thumb/manual
6 divisional toe studs for Pedal
Swell to Pedal reversible, thumb and toe
Great to Pedal reversible, thumb and toe
Choir to Pedal reversible, thumb and toe
Swell to Great reversible, thumb only
32′ Resultant reversible, toe only
32′ Cornet reversible, toe only
Zimbelstern reversible, thumb and toe
Full Organ reversible, thumb and toe
General Cancel, thumb only
Set piston, thumb only

“Any Piston Next” sequencer

Full MIDI interface and record/playback is included
Cover photo by Travis Massey, Magic Craft Studio

A. E. Schlueter Pipe Organ Company, Lithonia, Georgia
Hendricks Avenue Baptist Church, Jacksonville, Florida
The early morning hours of December 23, 2007 were of significance and great loss for the Hendricks Avenue Baptist Church. Due to contract negotiations with the symphony, the then-locked-out musicians of the Jacksonville Symphony Orchestra performed at Hendricks Avenue Baptist Church with a “Messiah Sing” on the evening of December 22. The proceeds of this performance were to benefit the Health and Welfare fund of the members of this institution. This was the last performance ever held in the sanctuary. Sometime in the morning hours of the 23rd a fire started and in a matter of hours consumed the church to the foundation. On the brink of Christmas, the stunned members and staff assembled on the church grounds in front of the still-smoldering pyre of their sanctuary, to console, pray, and plan. From this immeasurable loss they resolved to bolster their presence in the Jacksonville community with a new church and renewed dedication to their ministry.
Reverend Dr. Kyle Reese assembled a team to plan and oversee the rebuilding of the sanctuary. They vowed to have the church open no later than December 23, 2009, when they would again open the church to the public with a performance of Handel’s Messiah. In addition to Pastor Reese, key members who were to play a role in our building an instrument were O’Neal Douglas, chairman of the Sanctuary Renovation Task Force; Bill Mason, organ committee chairman; Reverend Tommy Shapard, Minister of Music and Worship; and Brenda Scott, organist. A constant presence on this construction project was O’Neal Douglas, who served as a living Gantt chart. He invested untold hours to assure the clear communications and coordination between all the different trades involved to build this church by the required completion date.
Lost in the fire was a three-manual, 48-rank Möller that had been installed in 1989. As one of the last instruments from Möller, it was a very good example of their building style and had been well loved by the congregation. Prior to working with our firm as a sales representative, Herbert Ridgeley Jr. represented the Möller firm. He had worked with then minister of music Reverend Kendall Smith on the installation of this Möller instrument. Marc Conley of our staff had worked on this instrument when he was employed by Möller. With these past affiliations, we began the initial discussions with the church as they considered a replacement pipe organ and evaluated firms that might build this instrument. In the words of Tommy Shapard, the charge of the organ committee was “to design an instrument with a variety of colors and levels of expression available in the new instrument to give our congregation and choir the opportunity to sing together more vitally and creatively as a worshipping body.”
I will always recall an exchange that took place early in our meeting with the organ committee. As we talked about a proposed stoplist, we were five minutes into the discussion when Chairman Mason raised a finger and jokingly said, “Arthur . . . from this point forward whenever we say Baptist, we want you to think Presbyterian.” He was referring to the landmark III/62 instrument our firm was building at that time for New York Avenue Presbyterian in Washington and its ties to President Lincoln and theologian Peter Marshall. (See cover feature, The Diapason, July 2010.) I came to find a much deeper meaning in his offhand quip. In public and private discussions, I have heard other builders refer to a “type” of organ they design by denomination. Personally, I do not believe one serves any church well by imprinting their view of any particular denomination—a generic “this is it” approach to stoplist and tonal design of an instrument. This is true regardless of whether it be Baptist, Methodist, Presbyterian, Catholic, Episcopal, or any other denomination. There are and always will be the subtle and not so subtle differences in a church’s worship style. Often in my professional career I have had a church explain their “traditional” worship only to find a worship style that I might personally find to be contemporary, or often a church that describes itself as “contemporary” to be traditional. The euphemism “blended” often used by many churches to describe their music in worship does not solve any identity issues either. As a builder, it is incumbent upon you to experience a church’s worship with your own eyes and ears and then really listen to how your client will use the organ in their worship. This is the only surefire way to refine a stoplist and scale sheets into a cogent amalgam that will allow you to design, voice, and tonally finish an instrument that truly serves the vision of the church you are working for.
A very real challenge in the design of this instrument was that the church moved very fast in the design of a building to assure their December 23, 2009 first service. By the time a contract was signed with our firm, the basic design of the building was locked in place and key building materials had been ordered. We had to work with the architect to design space for an instrument in a building that was already well defined. To allow for an instrument, space would have to be created. As a design team, we found that if we changed the width of the hallway access to the baptistery on the right and left and had a concrete lentil poured above the hallway and above the baptistery, room could be provided for a 43-foot-wide chamber of varying depth and elevations. Taking into account the sloping ceilings in the chambers, we planned a left-to-right division orientation of Swell, Great/Pedal, and Choir. The enclosed divisions of the organ have tone openings on their front and also on the side openings into the center Great and Pedal division. These side openings provide a coalescence and focus for the enclosed resources into the central axis of the instrument.
The chancel façade is designed to frame the baptistery. The façade is silver with polished mouths and features pipework from the 16′ Principal, 16′ Violone, 8′ Octave, and 8′ Diapason. The casework has a maple finish to match the church furnishings. To support the needs of audio-visual functions in their ministry, a projection screen was incorporated into the center section of the upper organ case.
The completed organ is 60 ranks, divided among three manual divisions in the chancel and a floating Antiphonal division in the rear of the church. My specification and scaling for this instrument has its roots in American Classicism, with an emphasis on the English elements found within this stylistic construct. All of the organ divisions are weighted around 8′ chorus structure. The Great is designed around a diapason chorus that has richness and warmth but that still maintains clarity in its phrasing. The Swell features an independent 8′ Principal, which allows the 8′ Swell string scales to be narrower, since these stops do not need to provide the core 8′ flue foundation. The Gemshorn in the Choir is generously scaled, with a wide mouth to support a function in this division analogous to a foundational Spitz Principal. The mixtures in the enclosed divisions are pitched at 2′ and provide a logical completion to the enclosed division principal choruses. This allows completion of the 8/4/2 chorus ladder without breaks in pitch or the need for independent 2′ principals as single stop draws. In addition to avoiding the stridency sometimes found in mixtures with pitches above 1′, this treatment of the mixtures also frees up the 2′ pitch registers for independent manual flutes.
While individually differing in color, the two enclosed divisions have parallel flue pitch registers for support of choral accompaniment. With a large, effective shade front, these divisions provide ample resources of weight and color against the human voice.
The organ reeds were designed with English shallots, which prove much more favorable in a dryer American acoustic. As is our common practice, the organ reeds are placed on separate reservoirs, separate tremolos, and individual unit electro-pneumatic windchests. This treatment allows the reeds to be freed from the strictures of the manual flue wind pressures. This allows complete freedom in scale, shallot design and treatments, and tongue thickness. With a separate tremolo, achieving the correct depth and speed on the reed stops does not become as elusive as it can sometimes be when flues and reeds share a common plenum.
For a large festive solo voice, the chancel organ features a high-pressure English Tuba. This stop is located in the Choir division, and under expressive control it can be used as a darker ensemble reed when it is dynamically caged. It is carried down to the 16′ register to effectively ground the Pedal division.
A very complete Pedal division was desired, with multiple pitches represented from 32′ through 4′. Just the 16′ registers alone represent nine of the 24 stops in the Pedal division. In addition to independent Pedal registers, full advantage was taken of manual-to-pedal duplexes. The result is a plethora of stops under the organist’s control, with a full range of colors and dynamics.
Early on in the design of this instrument, we prepared for a 10-rank Antiphonal. Due to the beneficence of several members, the church was able to contract for this “prepared for” item and have it installed with the chancel instrument. Visually, the rear organ takes its design from the chancel façade. Positioned between the two cases is an 8′ Trompette En Chamade with brass bells. Cognizant of its position in the church and the presence of the high-pressure English Tuba in the chancel organ, the stop was voiced on a moderate 7½ inches pressure. By its position, it has presence and lacks the offensiveness that is sometimes associated with this stop. The core of the Antiphonal organ includes a complete 8′ principal chorus, a lyrical 8′ Gedeckt, and an ethereal pair of 8′ Erzahler Celestes.
Foundational support for the Antiphonal division is provided by a Pedal 16′ Stille Gedeckt and 8′ Stille Principal in the Antiphonal Pedal division. In addition to providing foundation for the rear division, these stops are also very useful in larger organ registrations by adding definition and dimension to the chancel bass presence.
Never to be forgotten in an instrument of this size is the need for quiet contemplative moments. Early in our meetings we talked about the need for the organ to have the resources for what we began to refer to as “the whisper.” In the Choir division, we added a Ludwigtone stop. This is a wooden set of pipes with a dividing wall in the center of the pipe that has two separate mouths. Its unique construction allows each pipe to produce two notes, one of which can be tuned off-beating. In our stoplist as the Flute Celeste II, when it is drawn with a closed box, full couplers, and the Antiphonal Klein Erzahlers added to it, with a light 16′ Pedal stop, there is a moment of being surrounded by an ethereal magic that is at once all enveloping and yet without any weight.
Mechanically this organ uses our electro-pneumatic slider chests, with the organ reeds placed on electro-pneumatic unit chests. Conventional ribbed box regulators are used for the winding system.
The resources of the organ are controlled by a three-manual drawknob console. Built in the English style, the console sits on a rolling platform to allow mobility. The console exterior is built of maple, with an ebonized interior. The console features modern conveniences for the organist, such as multiple memory levels, programmable crescendo and sforzando, transposer, MIDI, and the ability to record and play back organ performances.
To allow full control in the tonal finishing of this instrument, we set sample pipes on the windchests in the organ chambers and then removed the pipes from the chambers to continue work with a portable voicing machine located in the chancel. This allowed us to work unimpeded and be more accurate with cutups and initial nicking, feathering, and flue regulation than could have possible within the confines of the organ chambers and the sea of pipework on each chest. After “roughing in” the pipework voicing, the stops were reinstalled in the organ chamber for final voicing and tonal finishing. In a process that lasted months, the tonal finishing was completed by a team including Daniel Angerstein, Peter Duys, John Tanner, Marc Conley, and Bud Taylor. In addition to our tonal finishers, our installation team included Marshall Foxworthy, Rob Black, Patrick Hodges, Jeremiah Hodges, Kelvin Cheatham, Joe Sedlacek, and Wilson Luna. I am thankful for their dedication and the long hours they put into this project to make sure that our tonal ideals for this instrument were not only achieved but exceeded.
The new sanctuary was finally at a point of completion by November 16 that we were able to begin the installation. The organ was brought up divisionally to allow autonomous work by our staff in multiple divisions. This allowed 40 ranks of the organ to be brought online when first heard in public on December 23, 2009. On this day, our staff was able to return home to be with their families during Christmas, and two family members, Art Schlueter Jr. and Arthur Schlueter III, were able to begin their Christmas together at the public opening of this church with Handel’s Messiah. Forever in my memory will be standing tall as father and son during the Hallelujah Chorus. As with all organ projects, there was still work to be done to complete and finish the organ, but it was a satisfying conclusion to a year that saw the installation of multiple new instruments by our firm and the fulfillment of a promise to this congregation and community.
A final chapter to this story must be told. To assist their search for an organbuilder and evaluate plans for a new instrument, the organ committee engaged local Jacksonville organbuilder, Jim Garvin, as part of their working group. As I developed my proposal for the church, he was a ready translator to discuss the minutiae of the organ proposal—from chest design, stop type, material construction, winding systems, etc. As a builder, I found it a great pleasure to work with Jim, who ably served as a liaison between the organbuilder and the church. Sadly, during the building of this instrument Jim began a battle with cancer. Even as he was weakened by his fight with the cancer, he never wavered in his role as consultant through the organ installation and dedication. I am happy to say that he lived to sing and worship with this instrument. One of our collective proudest moments was at the inaugural organ dedication with Dr. Al Travis. With a solid look in the eye and a firm stance, we exchanged handshakes as equals who had both worked to the best of our abilities on behalf of Hendricks Avenue Baptist Church. Earlier this year Jim lost his fight with cancer. His funeral was held at Hendricks Avenue Baptist Church, where I again returned to hear organ and choir, but this time to say goodbye. I will forever be grateful for my consultant and colleague I worked with in the completion of this project. Reminiscent of the way the project started, I once again heard Handel, as Jim’s final request for his service had been the Hallelujah Chorus.
Additional information on our firm and projects can be viewed at www.pipe-organ.com or by writing A. E. Schlueter Pipe Organ Company, P.O. Box 838, Lithonia, GA 30058.
—Arthur E. Schlueter III, tonal and artistic direction

All photos taken by Tim Rucci (www.timrucci.com)

Hendricks Avenue Baptist Church
Three manuals, 60 ranks

GREAT—Manual II
(unenclosed) (16 ranks)
16′ Violone 61 pipes
8′ Diapason 61 pipes
8′ Violone 12 pipes
8′ Flute Harmonique 49 pipes
(1–12 Pedal Bourdon)
8′ Bourdon 61 pipes
4′ Octave 61 pipes
4′ Spire Flute 61 pipes
22⁄3′ Twelfth 61 pipes
2′ Super Octave 61 pipes
IV Mixture 11⁄3′ 244 pipes
III Klein Mixture 2⁄3′ 183 pipes
16′ Double Trumpet 61 pipes
(English shallots)
8′ Trumpet 12 pipes
16′ English Tuba (Choir) (non-coupling)
8′ English Tuba (Choir) (non-coupling)
4′ English Tuba (Choir) (non-coupling)
Chimes (Choir)
Zimbelstern 9 bells
Great to Great 4′
Tremulant

CHOIR—Manual I (enclosed)
(13 ranks)
16′ Gemshorn 12 pipes
8′ Hohl Flute 61 pipes
8′ Gemshorn 61 pipes
8′ Gemshorn Celeste 49 pipes
8′ Flute Celeste II 80 pipes
(Ludwigtone)
4′ Principal 61 pipes
4′ Spindle Flute 61 pipes
2′ Harmonic Piccolo 61 pipes
11⁄3′ Quint 61 pipes
III Choral Mixture 2′ 183 pipes
8′ Clarinet 61 pipes
(English shallots with lift caps)
8′ English Tuba 61 pipes
(non-coupling)
Tremulant
Choir to Choir 16′
Choir Unison Off
Choir to Choir 4′

SWELL—Manual III (enclosed) (14 ranks)
16′ Lieblich Gedeckt 61 pipes
8′ Geigen Principal 61 pipes
8′ Viole de Gamba 61 pipes
8′ Viole Celeste TC 49 pipes
8′ Rohr Flute 12 pipes
4′ Geigen Octave 61 pipes
4′ Nachthorn 61 pipes
22⁄3′ Nazard TC 49 pipes
2′ Flageolet (from 16′) 24 pipes
13⁄5′ Tierce TC 49 pipes
IV Mixture 2′ 244 pipes
16′ Bassoon 61 pipes
(English shallots with lift caps)
8′ Trumpet 61 pipes
(English shallots)
8′ Oboe 12 pipes
4′ Clarion 12 pipes
Tremulant
Swell to Swell 16′
Swell Unison Off
Swell to Swell 4′

ANTIPHONAL—floating division (10 ranks)
8′ Weit Principal 61 pipes
8′ Gedeckt 61 pipes
8′ Klein Erzahler 61 pipes
8′ Klein Erzahler Celeste 49 pipes
4′ Principal 61 pipes
III Mixture 2′ 183 pipes
8′ Trompette En Chamade 61 pipes

ANTIPHONAL PEDAL
16′ Stille Gedeckt 12 pipes
8′ Stille Principal 32 pipes

PEDAL (7 ranks)
32′ Violone (digital)
32′ Bourdon (digital)
16′ Principal 32 pipes
16′ Violone (Great)
16′ Gemshorn (Choir)
16′ Subbass 32 pipes
16′ Lieblich Gedeckt (Swell)
8′ Octave 32 pipes
8′ Violone (Great)
8′ Gemshorn (Choir)
8′ Bourdon 12 pipes
8′ Gedeckt (Swell)
4′ Choral Bass 12 pipes
4′ Bourdon 12 pipes
IV Mixture 22⁄3′ 128 pipes
32′ Posaune (digital)
32′ Harmonics (wired Cornet series)
16′ Trombone (ext Tuba) 12 pipes
16′ Double Trumpet (Great)
16′ Bassoon (Swell)
8′ English Tuba (Choir)
8′ Trumpet (Great)
4′ Clarion (Great)
4′ Oboe Clarion (Swell)

Inter-manual couplers
Great to Pedal 8′, 4′
Swell to Pedal 8′, 4′
Choir to Pedal 8′, 4′
Antiphonal on Pedal

Swell to Great 16′, 8′, 4′
Choir to Great 16′, 8′, 4′
Antiphonal on Great

Swell to Choir 16′, 8′, 4′
Antiphonal on Choir

Antiphonal on Swell

MIDI controls (programmable as preset stops) (with record/playback) (audio included)
MIDI on Pedal
MIDI on Great
MIDI on Swell
MIDI on Choir

Combination system with a minimum of 128 levels of memory

Parkey OrganBuilders,
Duluth, Georgia, Opus 10
Holy Trinity Lutheran Church,
Marietta, Georgia
Holy Trinity Lutheran Church made the commitment to a pipe organ in the late 1970s as part of the construction of their new sanctuary. Though a new pipe organ was not in the plan, the church purchased a Votteler-Holtkamp-Sparling organ from First & Calvary Presbyterian Church in Springfield, Missouri. A dedicated group of members aided by a consultant/organbuilder moved the organ to Marietta, Georgia, and completed the installation of the organ in late 1980.
By 1980, the organ had been moved, altered, and enlarged. During the mid-1990s, Tim Young, the current organist, took the job as parish musician and began to evaluate the instrument and bring it into line with the needs of the church’s music program. Over time it was realized that the organ was far too large in sound to balance the room, and, unfortunately, some of the additions had not been as successful as originally hoped.
We were invited to look at the organ in 1997 and make a proposal to replace the console and relay switching system. In 2000, our firm completed a new three-manual drawknob console complete with new relays and capture system by Solid State Logic (now Solid State Organ Systems). This vastly improved the control of the organ, and the movable console allowed some changes of the choir space and chancel area.
In 2004, we made a number of changes, with new pipework to improve the diapason/principal choruses for a better balance in the room. Part of our tonal work included the addition of mutations to the Choir division in place of some of the redundant 8′ stops added in the 1950s by the Kilgen Organ Company. The changes worked very well and were well received by the membership.
By 2005, the church was discussing a major renovation of the sanctuary. The organ was showing its age in the mechanical/windchest department. Due to immediate need, chestwork was constructed and installed in the Great division in 2006. The church council later voted to include the pipe organ in the sanctuary renovation.
The sanctuary renovation was the impetus to remove the entire organ and recreate it as one cohesive instrument. By 2007, working with Tim Young, we completed the details of an ongoing tonal revision and layout of the organ, and a contract was signed in early 2008.
The organ was removed in summer 2008. Work began with new windchests and winding systems. The new organ features electro-pneumatic slider chests of our design and construction. The winding system is provided by single-rise box regulators. Chamber layouts were changed for improved tonal design and egress and to accommodate the relocation of the choir in the chancel. A new case and façade were designed in conjunction with Frank Friemel and added to the organ to replace the grille cloth and curtains of 1980. The case contains the bass of the 8′ Principal and 16′ Violone. It is built of clear red oak and finished to coordinate with the church’s interior finishes and woodwork. Acoustical improvements were made to the worship space to enhance the congregational singing and tonal presence of the organ and other instruments.
From the first we had planned for tonal changes to fill voids in the specification and create a better balance for congregational singing and choral accompaniment. The Clarinet and Oboe stops were retained from the 1929 Holtkamp organ, as were some of the flutes and strings. One rank of interest is the 8′ Ludwigtone from the 1929 Holtkamp; it was retained in the Choir division. The principal ranks are new, providing three complete principal choruses—one in each manual division. New trumpet ranks were added to the Swell, Great and Pedal divisions.
The Great division features a principal chorus of American heritage found in organs of the mid to late 1800s. The Swell division is based on an American Classic design that became prevalent in the 1930s. The Swell division starts with the backbone of an 8′ Violin Diapason and builds through to mixture. The strings and flutes retained in the Swell division promote a bit of romantic flair not lost in the history of the organ. The Choir division features many nuances of an English Choir division, again hosting its own diapason chorus through to mixture. The Choir principal (called Geigen) displays a lighter, articulate tone, useful for choral work. The 4′ Fugara is a string principal, adding a singing quality to the division while providing good blend with the Geigen.
The principal choruses combine to provide a solid foundation for congregational singing much as found in the Silbermann organs of the 1700s. Our flutes throughout the organ offer a wide variety of color, utilizing both open and closed variations in wood and metal. The reeds provide both color for solo work and fire for the final cap of the ensemble.
Tim Young worked closely with us during the reinstallation and tonal finishing of the instrument. The physical installation was completed in December 2008, and the final tonal work was completed in early 2009. Matthew Brown of Salisbury, North Carolina, a student of Gillian Weir, was a featured recitalist in April 2009. He demonstrated the flexibility of the organ through the works of Sweelinck, Bach, Harris, Vierne, Demessieux, and Calvin Hampton.
Our appreciation goes to Tim Young, organist; Ann Murphy, music director; and Ralph Daniel, charter organ committee member, for their help and cooperation on our Opus 10.
—Phil Parkey

GREAT
16′ Sub Principal 29 pipes
(1-32 from Pedal Violone)
8′ Principal 61 pipes
8′ Bourdon 61 pipes
4′ Octave 61 pipes
4′ Spitzflote 61 pipes
2′ Super Octave 61 pipes
III Fourniture 183 pipes
8′ Trumpet 61 pipes
4′ Clarion 12 pipes
Chimes
Zimbelstern
Great 16–Unison Off–4

SWELL
16′ Lieblich Gedeckt 61 pipes
8′ Violin Diapason 61 pipes
8′ Stopped Diapason 61 pipes
8′ Salicional 61 pipes
8′ Voix Celeste 61 pipes
4′ Principal 61 pipes
4′ Flute Harmonic 61 pipes
2′ Flute 61 pipes
III Plein Jeu 183 pipes
16′ Basson 12 pipes
8′ Trompette 61 pipes
8′ Oboe 61 pipes
4′ Oboe Clarion 12 pipes
Tremulant
Swell 16–Unison Off–4

CHOIR
8′ Geigen 61 pipes
8′ Flute 61 pipes
8′ Ludwigtone 61 pipes
8′ Dulciana 61 pipes
8′ Unda Maris TC 49 pipes
4′ Fugara 61 pipes
4′ Chimney Flute 61 pipes
22⁄3′ Nazard 61 pipes
2′ Flautino 24 pipes
13⁄5′ Tierce 61 pipes
III Mixture 183 pipes
8′ Clarinet 61 pipes
8′ Trumpet Gt
Tremulant
Choir 16–Unison Off–4

PEDAL
32′ Contra Bourdon 32 notes
16′ Diapason 32 notes
16′ Subbass 32 pipes
16′ Violone 32 pipes
16′ Lieblich Gedeckt Sw
8′ Octave 32 pipes
8′ Flute 12 pipes
8′ Gedeckt Sw
4′ Choral Bass 32 pipes
4′ Open Flute 32 notes
III Mixture 32 notes
16′ Bombarde 32 pipes
8′ Trumpet 12 pipes

Couplers
Great to Pedal 8, 4
Swell to Pedal 8, 4
Choir to Pedal 8, 4
MIDI to Pedal

Swell to Great 16, 8, 4
Choir to Great 16, 8, 4
MIDI to Great

Swell to Choir 16, 8, 4
MIDI to Choir
Choir to Swell 8
Choir/Great Transfer

Russell & Co. Organ Builders,
Chester, Vermont
First Presbyterian Church, Ithaca, New York

From the builder
The term magnum opus is often used in the organbuilding trade to denote the apotheosis of an organbuilder’s career. It is an impressive expression, and the organs that receive such an accolade are usually equally impressive. It is interesting to note, however, that the distinction of magnum opus can be an ephemeral one. What a builder thinks of as his ‘biggest and best’ may be eclipsed just a few years later with an opus magnum novum. In any event, at the outset of a project an organbuilder has termed his magnum opus, he inevitably approaches the creation of the instrument with great reverence and dedication. When we received the contract to build our opus 47 for First Presbyterian Church in Ithaca, New York, we knew this would be our magnum opus and, regardless of whether a grander organ would leave our shop in years to come, took on the project in this way, making no little plans to design and build a pipe organ worthy of this special moniker.
First Presbyterian is a grand Romanesque stone structure built in 1894 and located in the heart of downtown Ithaca. The sanctuary seats 500 under a high barrel vault, coffered and richly ornamented with plaster florets. The church enjoys a large, vibrant congregation and an equally active music program, including a sizable adult choir, children’s choir, and handbell choir. In conjunction with the organ project, the sanctuary was renovated to remedy the less-than-desirable acoustics. Previously, the entire floor of the room was carpeted, and the pews were cushioned in heavy velvet. A completely new ceramic tile floor, new and less-absorbent seat cushions, hardened wall surfaces, and a new rear wall designed to reflect sound randomly all contribute to a lively and supportive acoustic, approaching three seconds of reverberation.
The preceding instrument began its life in 1901 as Austin’s opus 39—a three-manual instrument of 47 ranks, including a five-rank Echo organ added in 1930. The organ was installed in the front of the church behind a handsome white oak case crowned with a magnificent central tower rising nearly the full height of the sanctuary. Designed in traditional early 20th-century style, the organ contained the typical myriad of foundation stops, with sparse trimmings of upperwork, undergirded by an ample and satisfying pedal department. Sixty-five years later, Austin was called to rebuild the organ in keeping with the tonal thinking of the day. The result was completely new pipework typical of late 1960s construction and voicing; the Echo organ, thanks to the organist, Dorothy Arnold, was retained and unchanged. With many manual stops sharing common basses, and the pedal division largely borrowed from the manuals, there was little foundation tone. The scaling of the new pipework exacerbated this condition, with halving ratios that resulted in a thin bass and a treble ascendancy unwelcome in so dry a room. The impressive 16¢ and 8¢ 1901 façade was completely replaced by much narrower-scaled pipes with English bay mouths, leaving large, odd-looking gaps between the pipes.
By the 1990s, the organ proved to be inadequate for the many demands the church’s music program placed upon it. Mounting mechanical problems toward the end of the decade that rendered the instrument increasingly unreliable led the church’s organist, George Damp, and the director of music, Larry Doebler, to realize that a completely new instrument was needed to correct the tonal inadequacies of the existing instrument and to fill the needs of the extensive music program. The church named John Schwandt as consultant on the project. Dr. Schwandt recommended requesting proposals from lesser-known builders of high quality. After a national search, Russell & Co. of Chester, Vermont was selected in late 2002 to build the new organ.
A profusion of new romantic organs in recent years, as well as a renewed reverence and interest in the work of early 20th-century American builders, specifically Skinner, was the milieu for the design and construction of this instrument. While Russell & Co. have built several large instruments along French romantic lines, an American romantic/ symphonic organ presented a new challenge: how to take all the lessons learned from our previous instruments, combine them with a century of progress in American organbuilding, and produce an organ capable of accompanying congregational song, playing choral and orchestral literature, and still be able to play the solo organ repertoire, all the while staying true to a ‘symphonic’ ideal.
This challenge was met valiantly with an effective partnership between our firm and George Damp. Having spent all his professional life as an organist, teacher, and church musician, George brought years of experience and a clear idea of what he wanted to the drawing board—a grand, large-scale organ that would make Ernest Skinner proud, but would also not disappoint the likes of G. Donald Harrison. While orchestral voices and ensembles were of great importance, so too was the presence of well-developed and blended choruses in each division.
Our initial proposal was for a three-manual organ with a separately enclosed Solo and Choir sharing one manual. However, during our early discussions with the church music staff, it became clear that to fill all the demands placed upon it, a significantly larger, four-manual instrument would be better suited and would eliminate several reluctant compromises in the original design. Having completed the rebuild of a four-manual Æolian-Skinner, opus 1433, for First Unitarian Church in Worcester, Massachusetts, and the building of a new, large three-manual French romantic organ for the Cathedral of St. Paul, also in Worcester, we felt ready to tackle our first new four-manual organ. During the selection process, George visited Worcester’s First Baptist Church, home to a rebuilt Reuter for which we constructed a new, large four-manual Skinner-style console. Skinner consoles have long been renowned for their visual elegance, impeccable craftsmanship, and intuitive and comfortable ergonomics. It was agreed First Presbyterian should possess such a console to complement the new organ.
First Presbyterian has long been host to performances of choral and chamber music by numerous local ensembles, and the acoustical renovation that preceded the organ installation only made the space more attractive for outside groups’ use. Knowing this, we included in the initial proposal a small division designed for use as a continuo organ at chancel level. George was hesitant at first—it seemed like a water and oil situation to have such a division included in a grand romantic organ. However, with a large, higher-pressure instrument as the main organ, George and Larry Doebler agreed that it would be futile to attempt to use it in continuo playing, and not only agreed to the division’s inclusion, but encouraged its enlargement. What started out as a small five-stop division grew into a full-fledged low-pressure Positiv, complete with a Sesquialtera and a very gently voiced four-rank Scharff. Its elegant case makes use of the crown and columns of the large throne chair that used to sit in the middle of the chancel, blending the case with the rest of the chancel decoration.
While spacious, the two front organ chambers had previously housed 47 ranks of pipes, including a very small pedal division. One of the project’s greatest challenges was to make 79 ranks of pipes fit in these same chambers—including a large-scale independent pedal division with three 32' stops—while maintaining easy access to each pipe and mechanism. After much experimenting in the forgiving world of computer-aided design, a layout that achieved both of these goals was reached. Aside from the Antiphonal and Positiv, the entire instrument is installed behind the organ case, with the Great, Solo and Choir divisions to the congregation’s left, and the Swell and Pedal on the right. There is no ceiling over these chambers, allowing for a great deal of sound to ascend into the barrel vault over the chancel, creating a wonderful blending chamber of sorts, which then projects the sound well into the room. Even from the center of the chancel, it is difficult to tell from which side sounds are coming.
The Antiphonal organ is located high up in the right rear corner of the sanctuary. The Antiphonal Swell division, consisting of the original Echo organ with two additions, is housed in the former Echo organ chamber. The two stops of the Antiphonal Great sit on a newly constructed ledge in front of the chamber, with the pipes from the 8' Prestant forming a simple and elegant façade.
The console constructed for opus 47 models the console at First Baptist in Worcester. Built of quarter-sawn red oak and walnut with a hand-rubbed oil and stain finish, it complements the elegance of the renovated sanctuary and restored organ case. With manual keys of 10th-cut ivory and ebony, and pedals of maple and ebony, the console immediately has a luxurious tactile feel. Through many consultations with George as well as with the organists working in our own shop, the selection and layout of controls were designed to be as intuitive to the player as possible. The stopjamb layout takes its cue from the tall consoles of English cathedrals; this provides the vertical space to lay out the complete choruses of each division in one line, making drawing every plenum quick and straightforward. Though a complete list of playing aids and mechanicals accompanies the specification, several are worth noting here. With the choral accompanist in mind, the Swell is provided with ten divisional pistons, and pedal-to-manual combination couplers with discrete memories are available on each division. A 99-level combination action is included with 16 general pistons and a sequencer; additionally, each piston can be easily modified as to which stops it affects, releasing the player from the distinction and restraints of divisional and general pistons. Divisional cancels are also provided by pushing the division nameplate on the stopjamb.
The key and stop action throughout the instrument is electro-pneumatic, a departure from our usual practice of employing slider and pallet chests. The chests are modeled on late 1960s Aeolian-Skinner pitman chests, with several of our own modifications. Even the Positiv, speaking on 23⁄4" pressure, plays on a pitman chest and works beautifully, resulting in quick and desirable pipe speech, ideal for its anticipated continuo use.
A design goal from the outset of the project was to make the organ large enough to have four complete manual divisions (seven, including the Positiv and Antiphonal Great and Swell), but to keep costs manageable, all the while not sacrificing quality. To this end, we looked to the existing Austin pipework, all having been new (with the exception of the Echo) in 1969, to see what might be reused in the new organ. While hard to believe this neo-baroque pipework could blend its way into an American romantic organ, we found much of the pipework was well constructed and cut up low enough to permit its successful rescaling and revoicing in a very different style.
Of the 40 completely new ranks of pipes added to the organ, all new choruses and flutes are constructed of 94% lead alloy, a practice we have long employed, allowing our voicers to achieve a degree of tonal superiority unattainable with the use of lighter, higher tin content alloys. In general, this allows the 8¢ line to be weighty and warm, progressing through a velvety chorus to light and silvery upperwork—all mixtures in the organ are also of the same high-lead content. The epitome of this construction and voicing style is the 8¢ Montre on the Great, a 42-scale Diapason more English than French, despite its name. Being placed outside the Great expression box, the Montre’s tone is commanding, warm and strong, and is paired with the enclosed 44-scale 8' Principal for lighter choruses. True to the design objective, choruses through at least 4¢ were provided in the three main manual divisions (Great, Swell, Choir), resulting in three very independent divisions that terrace and blend successfully for the performance of French literature. With the old Great 8' Principal revoiced as the Swell Diapason, and the 45-scale English Diapason in the Choir of special variable scale, the five combined 8' Diapasons create a rich, singing tone that serves as a lush solo color, as well as the basis for the aforementioned well-blended choruses.
One of the hallmarks of an American symphonic organ is the abundance of orchestral reeds, so carefully developed by the likes of Skinner a century ago. Fittingly, opus 47 has a delicious array of imitative stops spread out amid the manual divisions. The demand for these stops allowed us to use several ranks we had been storing in our stockroom for many years while the popular organ style called for very different reed stops. In the Choir division, the Clarinet finds its traditional home, and comes to Ithaca as a restored Johnson Bell Clarinet. In our study of early 20th-century American organs, a common finding was that the Choir division, while potentially having enough foundation tone, nearly always lacked the trumpet-class reed timbre to assert itself against the Swell organ. In this light, the second Choir reed deserves special note as an unusual stop, even in this age of rediscovered orchestral sounds. The 8' Waldhorn uses restored Aeolian pipes from the Higgins estate in Worcester, Massachusetts. This medium-scaled, capped trumpet is not quite a French Horn, and not quite a Trumpet, but something in between. It has a chameleon-like quality in that it is a beautiful and haunting solo voice, but when drawn with the full Choir, it acts as a chorus reed, giving the Choir a definite presence amidst full organ.
Two new reeds, the English Horn in the Solo, and the Orchestral Oboe in the Antiphonal Swell, were beautifully voiced by Chris Broome, turning out exactly as we had wanted them, and possessing striking imitative qualities.
For climactic moments in both repertoire and accompaniments, two solo chorus reeds are provided in the Solo division. The enclosed Tuba Mirabilis has harmonic resonators from tenor F# and is voiced on 15" pressure, providing the traditional dark, smooth and powerful tone suggested by its name. The 8' Silver Trumpet, played on 10" pressure, serves to contrast with the Tuba for a different effect. Envisioned in the same manner as the Solo Trumpet Harmonique at Yale’s Woolsey Hall, the pipes are constructed with French shallots and placed outside the Solo enclosure, yielding a brighter and brassier tone. While neither stop is oppressively loud, when combined they yield a tone of refined power that can top full organ with single notes.
Another criterion from early on in the project was to have a profusion of string stops of varying power and brightness to enable a truly orchestral string crescendo from pp to ff. While there are the usual strings sprinkled throughout the Choir and Swell, the Solo strings truly cap the string chorus, possessing incredible intensity and brilliance. Although the Solo was originally designed with one pair, the discovery of two ranks of Skinner orchestral strings in our stockroom led to the addition of a second set to be the pinnacle of the string chorus. Voicer Ted Gilbert worked wonders with these two pairs—the Gamba is the quieter of the two, possessing an almost woody quality, whereas the Cello represents the extreme limit of bright, powerful, shimmering string voicing. Twelve ranks of string or undulating tone in the organ, from the Swell Flauto Dolce through the Solo Cello, provide a seamless powerful crescendo, made even more effective with the use of double expression in the Solo.
No symphonic organ is complete without an expression system that can fully restrain the power of the instrument and instantly change the dynamic of the stops drawn. To this end, no fewer than six Skinner-replica whiffletree expression motors are used in this organ. While the Swell, Choir, and Antiphonal Swell are enclosed and expressive as expected, the Solo and Great warrant description of their expressive capabilities. From the outset, we had designed the Great to be partially enclosed, mainly the reeds and upperwork. Additionally, the Solo was to speak through its own shades into the Great box, providing the division with the aforementioned double expression.
The Great organ’s expressive capabilities were expanded early on with the decision to enclose the entire division with the exception of the 8' Montre and 16' Principal. Through careful scaling and voicing, the division doesn’t suffer its enclosure with the shades open, and contains the tonal resources necessary to lead enthusiastic congregational singing with all 500 seats filled, as well as serving its traditional role in the performance of organ literature. However, with the added benefit of 16-stage expression, these same tonal resources can be manipulated to match any congregation size, as well as provide another enclosed division of power for choral accompaniment.
At the same time, to give the Solo and Great more independence from each other, we added a second set of shades to the Solo, allowing the division to speak directly into the chancel. This provides the Solo division with a third expressive option. As installed, the Solo swell box is behind the Great box and four feet higher. The primary Solo shades open into the Great, with the Solo chancel shades being at the very top of the Solo box, four feet high, and opening directly into the room. While giving an acceptable dynamic range, these smaller shades provide an enormous timbral range, noticed especially with the strings. With the full Solo string chorus playing and the main Solo shades open, the full weight of the 8' stops comes through—one can almost hear bows drawn across the strings. However, when the upper shades open, the full range of upper harmonics from these stops erupts from the box, filling out the sound just when you thought it couldn’t be any brighter and more sonorous.
The control of all these expression options is met with four swell shoes, including the crescendo shoe. The Solo shoe normally controls the chancel shades. However, when the “Solo Double Expression” drawknob is drawn, the Solo shoe operates both sets of Solo shades, as well as the Great shades, in a set sequence to give the maximum crescendo possible. Additionally, a second drawknob closes the Solo chancel shades should that be desired, and sets the Solo shoe to control only the main Solo shades. The Great and Antiphonal Swell expression functions are independently assignable to any shoe, including crescendo. When not assigned, the shades default to a position settable by the organist. Harris Precision Products retrofitted two of their standard drawknob units with potentiometers to set these defaults, and thus these controls are seamlessly integrated into the console via rotating drawknobs. All Swells to Swell is provided to afford simple control over the entire dynamic range of the organ, and indicators are provided below the coupler rail to show the position of each set of shades.
The use of such sophisticated expression functions allows the organist to present the full dynamic range of the orchestra, and the use of the smaller Solo chancel shades allows for the ultimate in dynamic and timbral expression, a feature unique to this organ, and one we hope to further develop and use in subsequent installations.
To complement the varied and colorful manual divisions, a large, independent Pedal division affords the appropriate bass sonority for whatever registration is drawn on the manuals. Consisting of eleven independent ranks and 29 stops, the Pedal organ is augmented by judicious borrowing from the manuals. Four 32' stops are provided to underpin the instrument and provide a true feeling of gravitas. From the initial planning phases of the project, it was made clear that no digital voices were to be used in the organ; thus, all 32' stops play real pipes, or are derived. The Bourdon, of generous scale, is voiced gently for use with the softest registrations, but with enough quint in its tone to be made stronger as more pedal stops are added. The 32' Principal, an extension of the 16¢, uses Haskell pipes to GGGG#, the rest of the 32' octave being a resultant. The full-length 32' Contra Posaune, also masterfully voiced by Chris Broome, gives plenty of weight and power to full organ, but without being brash or rattling. For a ‘second’ 32' reed, the Harmonics is a 102⁄3' cornet, derived from the Great 16' Double Trumpet and 16' Gemshorn, giving the semblance of 32' reed tone underneath smaller tutti registrations.
With the added features of sophisticated expression, as well as the inclusion of more fully developed choruses, First Presbyterian’s instrument represents a logical and successful extension and merging of the two dominant styles of 20th-century American organbuilding: the symphonic and American classic schools. The instrument serves as a platform for the successful performance of a wide body of organ literature, as well as fulfilling its accompanimental roles. In its design, construction, voicing and tonal finishing, we feel truly proud to call this instrument our magnum opus, regardless of what instruments leave our shop in years to come, and thank First Presbyterian for the opportunity to set our sights high and build an organ we have so long dreamed of creating. We therefore commend this instrument to the glory of God and the people of First Presbyterian Church as a product of our finest craftsmanship. May it long bring joy and inspiration to those who hear and play it, just as it has inspired us as organbuilders in its creation.
Those working on the project included: Stephen Russell, David Gordon, Gail Grandmont, Carole Russell, Theodore Gilbert, Jonathan Ortloff, Larry Chace, Frank Thompson, Matthew Russell, Peter Walker, Allan Taylor, Eric Johansson, and Andrew Lawrence.
—Jonathan Ortloff

From the organist
Now in my fifth decade of deep affection for the pipe organ, its music, and its role in worship, I am brought to this point of extraordinary magnificence in the creation of the opus 47 Russell & Co. organ. During these five decades, I have witnessed many trends and fads in organbuilding. The commitment of this church to the pipe organ as its primary medium for the leading of congregational song is all the more inspiring to me.
This instrument transcends the fads of recent decades. The organ/sanctuary committee, formed by this church in the fall of 2000 and guided by our organ consultant, John Schwandt, selected several organbuilders to consider for the project. This committee authorized my colleague Larry Doebler and me to travel far and wide to experience the work of the builders we had selected as finalists, each of whom subsequently visited the church to inspect the sanctuary space and existing organ. In the end, we all had no doubt that Russell & Co. was the appropriate choice for us.
While we were confident that our new organ would be very fine indeed, we could not have anticipated the level of magnificence that has been achieved here by Stephen Russell and his colleagues. In my 50 years of playing pipe organs, I have never been privileged to play an organ so elegant, expressive and versatile as this one. The word synergy is one that I have never before been comfortable using. This powerful word, meaning “combined or cooperative action or force,” is the perfect term to describe the wondrous emergence and continuing presence of this organ. Beginning with the collective sharing of the original committee, the guidance of Anita Cummings, pastor of this church at the outset of the project, the beneficence of Mrs. Dorothy Park, church member and donor of funds for this organ, the courage and vision of church members to undertake and fund the acoustical transformation of the sanctuary from sonically “dead” to vibrant and moderately reverberant, and the mutual respect and creative sharing of organbuilder, consultant and resident organist, have resulted in the ultimate synergy: the harmonious blending of thought, craft, sound and space that is far greater than the sum of its parts.
I offer gratitude and the highest of commendations to master organbuilder/voicer, Stephen Russell, his dedicated staff, and the many others who have had a hand in the three-year process of the emergence of opus 47!
—George Edward Damp

From the church
The history of our new Russell organ begins with the construction of our current sanctuary in 1894. In 1901, the Austin Company installed our first permanent organ (the oak façade that currently supports the visible organ pipes behind the choir is part of that original installation). In 1930, the Echo organ (above the southwest entrance to the sanctuary) was added. In 1969, Austin built a completely new organ in the chancel, one typical of that period—an instrument that, with its sheer power and rough voicing, overwhelmed our beautiful, but acoustically rather dead, sanctuary.
Problems with the Austin organ started to appear in the early 1990s. Minor problems continued to occur, and it was clear that something needed to be done. An organ/sanctuary committee was formed that, early in its existence, possessed the keen insight that the sanctuary itself was a part of the organ (the box that the organ’s voice is dispersed into), and that any renovations to the organ must be accomplished within the acoustical framework of the sanctuary.
As a result, the committee hired an organ consultant, John Schwandt, and an acoustical consultant, Scott Riedel, to guide them through the decision-making process of repairing our organ. Each made an initial, individual presentation to the committee, but most memorable was their joint participation in a lengthy “town meeting” with the committee and members of the congregation. The meeting ended with a focus for the project—to improve our worship experience by enhancing both music and the spoken word through renovations to both the organ and the sanctuary.
Early on in this process, then-pastor Anita Cummings and organist George Damp approached Mrs. Dorothy Park with the invitation to become a supporter of this exciting adventure for the church. After several subsequent discussions, Mrs. Park indicated that the church deserved the finest organ created by the finest builder, and that she would cover the cost of the organ if the congregation would pay for the acoustical renovations.
A clear consensus decided that Stephen Russell was the right person to build the new organ. At the same time, Schickel Architecture of Ithaca was selected to design the renovations to the sanctuary. Several significant changes to the sanctuary were implemented to improve the acoustical environment. Certainly the most outstanding component of the sanctuary renovations is the reconstruction of the rear wall of the sanctuary. Its subtle sunburst pattern surrounding a high circular window is both extremely pleasing to the eye as well as functional in randomly scattering sound.
Suffice it to say, every aspect of the organ, from its general layout to the voicing of each individual pipe (all 5,000 of them) was accomplished with the unique features of our sanctuary in mind. The outcome is truly a gift for the ages, something that First Presbyterian Church can share with Ithaca and the surrounding area for decades to come. One can only hope that the generosity of Mrs. Park and the efforts of those involved in this project will be more than repaid by the joy and exhilaration shared by all those who experience our wonderful new organ.
—Tom Owens,
Elder and member of session,
First Presbyterian Church

From the consultant
It is a privilege to offer a few words regarding Russell & Co. opus 47. In a world that so desperately hungers for and needs beauty, it is satisfying to have been a part of a long process that has ultimately yielded a thing of great beauty that will inspire the generations yet to come.
My primary involvement in this project occurred before contract-signing. It is my fervent belief that consultants should provide general education and thereby enable church committees to make an informed decision about what is best for their congregation’s worship and community life. However, before we could start to talk about organs, it was very important to have the bigger picture in perspective, namely the inferior acoustical properties of the room. The committee wisely considered the importance of good acoustics that benefit congregational prayer, singing, oratory, as well as but not limited to instrumental music. Scott Riedel provided acoustical consultation; the action taken on most of his recommendations yielded a vastly improved sacred space.
The pipe organ, while not the only possible instrument for worship, remains the best single instrument to lead corporate worship because of its ability to sustain tones from soft to loud and from every pitch level. A well-designed and constructed pipe organ should enable an organist to creatively and expressively accomplish this musical leadership, often interpreting music of many different styles. It was my recommendation that an organ of rich, warm tone and with ample variety of color from all pipe families (principal, flute, string, and reed) be considered. The great organbuilders of the past were not striving to build instruments after someone else’s style, but to create organs suited to the rooms in which they were installed and reflecting the cultural identity of their time and place. That Russell opus 47 resembles in some aspects organs of the early half of the 20th century is entirely irrelevant. The fact remains that it is not an E. M. Skinner organ, an Æolian-Skinner organ, a Kimball organ, or any other organ. Rather, I believe that this instrument transcends labeling of any kind. Opus 47 has richness of color, overall warmth, and clarity. In previous periods of organ building, rich fundamental tone and clarity were thought to be mutually exclusive attributes; one could not have both. The refined voicing and the mechanical perfection of the pitman windchest exemplify an organ that will allow for music of any style. Congratulations are due to the committee and congregation for investing in their future so well!
—John D. Schwandt

Russell & Co. Organ Builders, Opus 47
First Presbyterian Church, Ithaca, New York, May 2006

GREAT – II (Expressive)
16' Principal* 49 pipes, 1–12=Pedal
16' Gemshorn* 12
8' Montre* 61
8' Principal 61
8' Bourdon 61
8' Flûte Harmonique 49
8' Gemshorn 61
4' Octave 61
4' Rohrflöte 61
22⁄3' Nasard 61
2' Fifteenth 61
11⁄3' Fourniture IV–V 297
16' Double Trumpet 61
8' Trumpet 61
Chancel Great Off
MIDI on Great
*Unenclosed

SWELL – III (Expressive)
16' Lieblich Gedeckt 61
8' Diapason 61
8' Bourdon 61
8' Viola 61
8' Viola Celeste 61
8' Flauto Dolce 61
8' Flute Celeste 49
4' Octave 61
4' Nachthorn 61
2' Octave 61
2' Plein Jeu IV–V 296
16' Fagotto 61
8' French Trumpet 61
8' Oboe d’Amour 61
8' Vox Humana 61
4' Clarion 61
Tremulant
MIDI on Swell
Swell Sub
Chancel Swell Off
Swell Super

CHOIR – I (Expressive)
8' English Diapason 61
8' Hohlflöte 61
8' Quintadena 61
8' Erzahler 61
8' Erzahler Celeste 49
4' Octave 61
4' Koppelflöte 61
22⁄3' Nazard 61
2' Flute 61
13⁄5' Tierce 61
16' Corno di Bassetto 12
8' Waldhorn 61
8' Clarinet 61
Chimes Ant. Swell
Tremulant
Choir Sub
Choir Off
Choir Super
MIDI on Choir

POSITIV – I
8' Gedeckt 61
8' Spillflöete 61
4' Prestant 61
2' Principal 61
11⁄3' Quint 61
22⁄3' Sesquialtera II 122
1' Scharff III–IV 232
Tremulant
Zimbelstern
Positiv Off

SOLO – IV (Expressive)
16' Cello 12
8' Concert Flute 61
8' Cello 61
8' Cello Celeste 61
8' Gamba 61
8' Gamba Celeste 61
8' English Horn 61
8' Tuba Mirabilis 61
8' Silver Trumpet* 70, double trebles
Chimes Ant. Swell
Tremulant
Solo Sub
Solo Off
Solo Super
MIDI on Solo
*Unenclosed

ANTIPHONAL GREAT – II
8' Prestant 61
8' Stopped Flute 61
Antiphonal Great Off
Antiphonal Great Super

ANTIPHONAL SWELL – III
8' Gedeckt 61
8' Viole Aetheria 61
8' Vox Angelica 49
4' Flute d’Amour 61
8' Orchestral Oboe 61
8' Vox Humana 61
Chimes
Tremulant
Antiphonal Swell Sub
Antiphonal Swell Off
Antiphonal Swell Super

PEDAL
32' Principal (GGGG#) 4
32' Contra Bourdon 12
16' Open

Russell & Co. Organ Builders,
Chester, Vermont
First Presbyterian Church, Ithaca, New York

A. E. Schlueter Pipe Organ
Company, Lithonia, Georgia
First United Methodist Church, Atlanta, Georgia
Atlanta First United Methodist Church was originally organized as Wesley Chapel in 1847, and has maintained a long tradition of excellence in worship. The present church was built in 1903, when Mr. Asa Candler purchased the former church site for the headquarters of Coca-Cola. After moving to the new location, the church changed its name to Atlanta First United Methodist Church. Many Methodist luminaries have served this congregation, including the venerable Pierce Harris.
The first pipe organ known to be installed in the church was a two-manual Roosevelt in 1885. When the present church was built, this instrument was moved. In 1919, the organ was re-actioned and rebuilt by Möller. Further changes occurred in 1953 when the organ was enlarged to 46 ranks by another firm. A new façade was built from new and existing pipes in a “pipe fence” array; while commanding in stature, the new façade did not pay homage to the architecture of the building and was poorly constructed. Fortunately, during the 1950s work, ten stops from the former Roosevelt instrument were retained; unaltered, they could be considered for inclusion in the new 2008 instrument. Over the succeeding years, the organ was rebuilt as sections failed and generally kept in working order. The organ provided the basic needs for service playing, but, quite simply, was too small for the space.
Jump forward to 2003 when senior pastor Rev. Wayne Johnson commissioned a feasibility task force to redefine the church’s mission and plan for future ministry. As with many downtown churches, the community around the church was displaced as office buildings replaced homes. Yet this church saw opportunity. The feasibility task force determined it needed to continue its television ministry, continue its education through the Candler School (founded at Atlanta FUMC, but now only affiliated through the denomination), and renovate and restore the church building. It was noted that the organ needed to be addressed as part of the building infrastructure. The task force engaged an architect to provide possibilities for the chancel renovation. J. Donald Land, director of music and organist, led the charge to consider the organ and its renovation or replacement.
A. E. Schlueter Pipe Organ Company was one of several firms interviewed for the project. We viewed this as a real opportunity to build an instrument of significance in our hometown. It is not often that an opportunity develops to build a “Magnum Opus” in the same city as a firm’s location. The Schlueter family decided that the building of this instrument was more important than simple financial gain. Trust that our pencils were very sharp because of this unique opportunity to create art. In our interview, we discussed with the committee the opportunity for an organ of multiple divisions and a wide palette of colors, in an organ case that would complement the church. Specific emphasis was placed on preserving the stewardship of the past. In our design, pipework from the two previous instruments was incorporated in the various departments of the organ.
Quality organbuilding is never the result of one individual but of the synergy of a team. In this respect, our firm was ably assisted by the Atlanta First United Methodist Church clergy, music staff, church staff, and feasibility task force. These individuals readily gave of their time and talents and provided invaluable assistance from the inception of the organ project to its installation and tonal finishing. Specifically we would like to recognize Dr. Bob Smith, chair of the feasibility task force, who was charged with the selection of the architect and organbuilder; J. Donald Land, director of music and organist; Wally Colly, church liaison; senior pastor Rev. Wayne Johnson, deceased, whose vision propelled this project forward even in his absence; and current senior pastor Dr. Jim Ellison.
As part of the building renovation, the choir loft was to be lowered (it was eight feet above the pulpit). This meant that the organ case would need to begin from a much lower plane than the actual organ chamber. We designed the lower case walls to begin below the main organ chassis and act as a reflective shell for the choir. The interior layout of the organ was designed to allow the choir to hear the organ without taking the full brunt of large registrations. In effect, the organ “blooms” just forward of the choir loft.
At the center point of the organ, the chamber is only nine feet deep, so modest cantilevers were designed into the organ case to grow the chamber space without creating a large shelf above the choir that would hamper hearing the organ. Visually, these forward pipe towers give the illusion of a more forward presence.
The engineering that developed would require the organ divisions to be stacked one on top of another. Often stacked organs rely on the division above to form the ceiling for the lower division. This is a problem because the sound speaks into windlines, reservoirs or schwimmers, organ actions, or other parts. It is also mechanically difficult to service the above division because of the sea of pipes located below it; this is often remedied by placing additional perch boards over the pipes, thus adding more impediments to sound reflection. Our solution was a careful design that built dedicated floors and ceilings in each division.
The layout of the organ finds the Swell, String and Choir divisions located on the bottom level. The Solo and Great divisions are located in the top level of the organ, with the Pedal in an open two-story chamber in the center of the case. The Great is enclosed with a ceiling that allows it to speak into the center of the case and to blend with the lower divisions in the chancel, rather than going completely over the musicians’ heads. This purposefully built chamber has proved very effective in coalescing the many divisions of the organ and eliminates geographic specificity of the individual organ stops. The rear of the church houses the Antiphonal, Antiphonal Pedal and Trompetteria divisions of the organ. The Antiphonal is situated at the same height as the Great organ, thus promoting tuning stability.
Because the church has a very active television ministry, there was a concern about the console being exposed and commanding behind the pulpit. A lift was designed that allows the console to be lowered to reduce its visual signature, and, when not needed for other church events, the console can be lowered down and rolled into a side parking location. The platform then can be raised to increase the available space in the chancel.
The console and organ case are constructed of quarter-sawn white oak. We made a conscious effort to incorporate elements of the church building into the console and organ case. Our design engineers, Howard Weaver and Robert Black, saw to it that arches, quatrefoils, and acanthus leaves became part of our vocabulary. It was clear that portions of the organ case would require large grille openings to provide maximum divisional egress into the room. We did not desire to use cloth grilles in the organ case. These impede airflow, are long-term maintenance issues, and affect sound. We designed wood grilles with an open quatrefoil pattern, which allow both the free passage of sound and airflow for tuning stability.
In designing the console, we were very concerned about the ergonomics of its layout. Those who have had the opportunity to sit at larger consoles are aware of their visual and physical challenges. To overcome some of the issues of actually reaching the playing surfaces, we foreshortened the organ sharps as the keys ascended from Manual I to Manual V. The keyboards are not sloped, but with subtle adjustment to the manual relationships even Manual V is comfortable to reach. A similar consideration was given to the pedalboard and expression shoes, which were designed using proportions normally found in our three-manual consoles. Special attention was given to the layout of the pistons, toe studs, drawknobs, and tilting tablets. The end result is that all of the controls can be used and seen without the leaning and craning about that occurs on a large console. It is a very comfortable console to play.
Some interesting facts about the organ:
• the organ contains 93 ranks with 5,360 pipes represented in nine divisions;
• in excess of 10,000 board feet of lumber were used to build this instrument;
• the organ contains over 10 miles of wiring for switching and control;
• the organ uses wind pressures that range from 3½" to 11";
• the main manual windchests are slider, with reeds on electro-pneumatic windchests;
• three divisions of the organ are located in the rear chambers;
• the Trompette en Chamade in the rear of the sanctuary is made from brass;
• the organ weighs over 44,000 lbs.;
• the front organ case stands over 43 feet tall;
• the instrument contains pipes of lead, tin, zinc, brass, and wood;
• the wind for the organ is created by three blowers;
• the organ is controlled with a five-manual console.
The tonal design of this organ was the result of many discussions. Prior to scaling this instrument, organist Don Land and I were able to visit a number of recent instruments built by our firm. Doing this in a short time frame was very helpful to determine tonally where we had gone and where we were going. Don brought in local organists Tom Alderman, David Stills and Richard Morris for their input to the specification and console layout. Tom Alderman worked as a consultant to Don. As a triumvirate, we worked through the myriad of decisions involving the final stoplist, drawknob layout, couplers, pistons, toe studs, and other controls. In the end, I recognize that I was offered a tremendous level of trust and generally an unfettered hand in the tonal design and scaling of the organ.
As the final specification became the math of scales, halving ratios, metal thickness, mouth widths, cut-ups, and languid bevels, I had the good fortune of having Daniel Angerstein and John Tanner to look over my notes. We have worked together on many projects over the years.
For tonal finishing, I was very ably assisted by a team led by Daniel Angerstein, with the assistance of John Tanner, Lee Hendricks, and Bud Taylor. I want to thank Daniel, John, Lee, and Bud for their input regarding division balance, dynamics, color, neutrality, fundament, harmonics, chiff (or lack of), treble ascendancy, and so many other factors. There must always be a final arbiter of design and direction and, in those instances where I followed a different path or tonal treatment, the civility for further discourse remained. I would like to personally single out Daniel Angerstein for his contribution to this project.
It is the daily give and take and discussion that allows art to flourish. It is a rule of organbuilding that you will not make everyone happy with your choices and decisions. The most important question is not “what will others think?” but “have I completed the work to the best of my ability and the charge or commission that I was given by my client to achieve their vision?” As a builder, it is important always to remember what the service role of the instrument will be, and that in the end, the instrument you are building is a tool for worship and is part of the church fabric. Just as your thumbprints are on the instrument, so must be the thumbprints of the church members.
On a project of this size, one challenge was keeping the organ in tune and making adjustments called for during tonal finishing. To make this happen, the voicers would work from 8 am to noon and then break. During lunch hour, members of our staff would take the opportunity to “punch-list” final items and adjustments. When the voicers returned, the room again would settle into the silence of single tones and “louder, softer, more flue, less flue,” etc. After the voicers left in the evening, the crew was again released to make adjustments until 9 pm, when the tuning crew arrived to perform the nightly vigil of preparing the organ for the voicers in the morning. Where stops required work beyond a reasonable ability to perform it in the chamber, we would prepare sample Cs and remove the stop for voicing in our shop. The completed stop would then be installed into the organ for final finishing. This ballet of work went on for weeks on end, and I wish to thank the dedicated members of my staff for the completion of this instrument and for the internal support provided from one staff member to another.
Special recognition must go to our craftsmen, Marc Conley and Robert Black, who were ever present in overseeing the design, engineering, and building of all of the myriad parts that constitute an instrument of this stature. They ensured that the final fit and finish met our standards of quality in engineering and execution. Marc served on the “sharp end of the stick” and worked untold hours at the church to see the project to its completion.
Tonally, this instrument reflects our desire to create organs that possess warmth and clarity. In this room, which promotes clarity of tone and gentle unforced voices, we found wonderful bass presence but the need for an ascendant treble. In the tonal design, all of the divisions of the organ are based on an 8' principal chorus. We differentiated these principal choruses, in addition to the vast array of flutes, strings, and mutations to allow the performance and support of many schools of repertoire. The organ was designed with numerous strings and celestes. It is an absolute joy to hear a transcription on the organ or the subtle undergirding of a choir. With the plethora of solo reeds in the organ, we were able to provide differing reed choruses in the various divisions and pure ensemble function for some of these departments. The organ has reeds designed after English, German, and French styles. The completed instrument pays homage to the important organbuilders and organbuilding styles of the past but is not a copy of any particular builder or style.
This instrument was designed to play a role in all musical styles of worship, from traditional to contemporary. To support the non-traditional role, the instrument is equipped with MIDI capability and a separate chamber audio system. This allows other tones not normally associated with the organ to be generated and controlled by the console. In this manner the organ can blend its voices with other sounds and participate in services that might normally exclude the pipe organ.
Early on, the client had discussed the inclusion of some digital voices in the organ. There was a desire for some stops in the organ that would be considered secondary or tertiary in nature and were the type of stops that might normally be drawn out of a MIDI sound module. They did desire that these stops be voiceable and individually tunable, which specifically excluded MIDI voices. In our interview, we were asked if we would consider working with Walker Technical Company in the installation of these voices. Even though the majority of our experience had been limited to 32' and 16' extensions and percussions, we were aware of the high quality of engineering and sound quality provided by Walker.
As we considered the inclusion of digital voices, the primary question was how? It is probable that, in consultation with the client, we could have left prepared-for stops in the console, to be completed by a third party without our direct involvement. In effect, the stops could have been added in a “don’t ask, don’t tell” fashion, which we considered unpalatable. I am well aware that this method of installing digital stops has allowed some firms to remain “intellectually honest,” but I consider this method to be, at best, morally untenable. If you are providing for additions to the organ in the console and relays, which forces a digital solution because the chamber, winding system, or structure could never accommodate the proposed installations, you cannot pretend you simply did not know, and worse, you have ceded part of your tonal vision to a third party. We considered that if this were the desire of the client, we would work to ensure as seamless an integration of the adjunct stops as possible and to consult on the stops and their voicing.
One fundamental concern with the inclusion of digital stops is where does one start and where does one end once the genie is “out of the bottle.” Our consideration was simple—even though there was a possibility to use digital voices, we strongly desired the organ to be able to stand on its own with the speakers and amps unplugged. There were instances where it would have been much easier to leave out that additional 16' register of pipes in lieu of a digital voice. I am proud to say we resisted this temptation and made organbuilder choices.
Bob Walker worked directly with our firm and Daniel Angerstein in voicing and tuning these stops, and we were very pleased with the final results. Where we desired the voicing and balances to be altered and changed, Mr. Walker was accommodating and worked to achieve a result in keeping with our overarching tonal philosophy for this instrument. The digital stops are as seamless as we had hoped, and the stops contribute around the periphery, as planned by the client, without overtly placing their presence on the stoplist. To the critics, I would say that our firm approached this instrument with integrity of design, and you can indeed play the organ successfully without any digital stop. There are now 93 ranks of wind-blown pipes where there were 46 ranks, and we have completed the tonal vision of our clients in a unified, cohesive manner.
In the end, how do we view this project? In truth, we are still overwhelmed by the opportunity presented to us and the fine work completed by our staff. It is as if we have been so close to the project it is difficult to see what we have done. Analytically, we are aware that the instrument is stunning to hear and see, and yet it will take time to back away far enough from the façade, console, and thousands of pipes to see and hear what others already know of this instrument.
Personally, I do know this—our firm was gifted with an opportunity to build an instrument that we could only have dreamed of at the beginning of our career. We are grateful for the trust placed in us by Atlanta First United Methodist Church and so very fortunate to have the talented and skilled staff that we enjoy. Our tonal philosophy is to “build instruments that have warmth not at the expense of clarity and clarity not at the expense of warmth.” We are thankful to have been given such a grand canvas upon which to express our tonal ideals.
In summation, I would like to thank my father and our company founder, Arthur E. Schlueter, Jr. He is the foundation upon which our company was built and continues to thrive. His continuing role as artist, mentor, and president provides the ongoing oversight of our firm. I am humbly proud to call him both Boss and Dad, as we together work to build instruments for worship.
—Arthur E. Schlueter III

A.E. Schlueter Pipe Organ Company wishes to thank its staff including:
Arthur E. Schlueter Jr., president
Arthur E. Schlueter III, vice president/tonal and artistic direction
John Tanner, vice president of production/tonal finisher
Howard Weaver, senior design engineer
Rob Black, master cabinet-maker/organ engineer
Marc Conley, production supervisor
Bud Taylor, assistant production supervisor
Shan Dalton, office manager
Bob Parris, executive assistant
Barbara Sedlacek, office support
Mike Norris, woodshop foreman
Tony DiLeo, console builder
Bob Black, BSME, mechanical engineer
Joe Sedlacek, console wiring
Jeffery Chilcutt, CAD operator
Michael DeSimone, leathering and assembly
Dustin Carlisle, organ assembly
Sam Polk, organ assembly, tuning assistant
Kelvin Cheatham, organ assembly
Wilson Luna, assembly and wiring
Norma Renteria, leathering, assembly and wiring
Rockshawn Owens, organ assembly
Ruth Lopez, leathering and assembly
Kevin Cartwright, tuning & tonal assistant
Bob Weaver, leathering, assembly, tuning and service
Othel Liles, electrical engineer
Patty Conley, relay wiring
Herb Ridgely, Jr., sales & support
Mike Ray, electronics technician
David Stills, sales & support
Rick Stewart, sales & support
Dave Kocsis, program manager

The cover photo is by Michael Mitchell of Creative Expressions. Other photo credits as indicated.

GREAT (Manual II, unenclosed)
32' Contre Bourdon (Pedal)
16' Bourdon (Pedal)
16' Violone 73 pipes
8' First Open Diapason 61 pipes
8' Second Open Diapason 61 pipes
8' Violone (ext)
8' Harmonic Flute 49 pipes
(common bass from Rohrflote)
8' Rohrflote 73 pipes
5-1/3' Gross Quint 61 notes+
4' Octave 61 pipes
4' Prestant 61 pipes
4' Rohr Flute (ext)
3-1/5' Gross Tierce 61 notes+
2-2/3' Twelfth 61 pipes
2' Super Octave 61 pipes
2' Waldflote 61 pipes
2-2/3' Cornet III 183 notes+
1-1/3' Fourniture V 305 pipes
2/3' Scharf IV 244 pipes
16' Contra Trompete 85 notes+
8' Trompete (ext)
4' Clarion (ext)
16' Trombone (Solo)
8' Tromba (Solo)
8' Festival Trumpet (Solo)
Tremulant
Chimes (enclosed with Solo)
Cymbalstern
Great to Great 4'
MIDI on Great A
MIDI on Great B

SWELL (Manual III, enclosed)
16' Lieblich Gedeckt 73 pipes
8' Violin Diapason 61 pipes
8' Traverse Flute 61 notes+
8' Stopped Flute (ext)
8' Viola de Gambe 61 pipes
8' Viola Celeste 49 pipes
8' Viol Dolce Celeste II 122 notes+
8' Flute Celeste II 122 notes+
4' Prestant 61 pipes
4' Harmonic Flute 61 pipes
4' Unda Maris Celeste II 122 notes+
2-2/3' Nazard 61 pipes
2' Flageolet 61 pipes
1-3/5' Tierce 61 pipes
2' Plein Jeu Grave IV–VI 330 pipes
2/3' Plein Jeu Acuta III–IV 208 pipes
16' Bombarde 61 notes+
16' Contre Fagotto 85 pipes
8' Trompette 73 pipes
8' Oboe 61 notes+
8' Vox Humana 61 notes+
4' Clarion (ext 8')
4' Fagotto Clarion (ext 16') 24 pipes
Tremulant
Swell to Swell 16'
Swell Unison Off
Swell to Swell 4'
MIDI on Swell A
MIDI on Swell B

STRING ORGAN
(Manual III, enclosed with Swell)
16' Viol Celeste II 122 notes+
8' Viol d’Orchestra 61 notes+
8' Viol Celeste Sharp 61 notes+
8' Viol Celeste Flat 61 notes+
8' Dulcet Celeste II 122 notes+
4' Violina Celeste II 122 notes+
4' Dulcet Celeste II 122 notes+
8' Vox Mystique 61 notes+
Tremulant
String Unison Off

CHOIR (Manual I, enclosed)
16' Quintaton 61 notes+
8' Weit Principal 61 pipes
8' Voce Umana 61 notes+
8' Bourdon 61 pipes
8' Gemshorn 61 pipes
8' Gemshorn Celeste 49 pipes
8' Unda Maris II 122 notes+
4' Principal 61 pipes
4' Nachthorn 61 pipes
2-2/3' Nasat 61 pipes
2' Wald Flute 61 pipes
1-1/7' Septieme 61 notes+
1-3/5' Terz 61 pipes
1-1/3/ Quint 61 pipes
1' Sifflote 61 pipes
8/9' None 61 notes+
2' Choral Mixture IV 244 pipes
1/2' Terz-Cymbal III–IV 208 pipes
16' Corno di Bassetto 61 notes+
8' Clarinet 61 pipes
16' Dulzian 61 notes+
8' Holzregal 61 notes+
4' Rohr Schalmei 61 notes+
8' Tromba (Solo)
8' Harp 73 notes+
4' Celesta (ext)
Tremulant
Choir to Choir 16'
Choir Unison Off
Choir to Choir 4'
MIDI on Choir/Pos A
MIDI on Choir/Pos B

ANTIPHONAL (Manual I, enclosed)
16' Bourdon 97 pipes
8' Principal 61 notes+
8' Gamba 61 pipes
8' Salicional 61 pipes
8' Voix Celeste 49 pipes
8' Gedeckt (ext)
8' Flute Celeste II 122 pipes
4' Principal 61 pipes
4' Harmonic Flute 61 pipes
2-2/3' Nazard (ext 16')
2' Blockflote (ext 16')
2' Mixture IV 244 pipes
16' Contre Trumpet 61 notes+
8' Harmonic Trumpet 61 pipes
8' Flugel Horn 61 pipes
Tremulant
Antiphonal to Antiphonal 16'
Antiphonal Unison Off
Antiphonal to Antiphonal 4'

SOLO (Manual IV, enclosed)
8' Major Open Diapason 61 notes+
8' Violincello 61 pipes
8' Violincello Celeste 49 pipes
8' Doppelflote 61 pipes
8' Flauto Mirabilis 61 notes+
4' Claribel Flute 61 pipes
4' Eclat V 305 notes+
8' Tromba 61 pipes
8' English Horn 61 pipes
8' Harmonic Trumpet 61 pipes
8' Festival Trumpet 61 notes+
8' French Horn 61 notes+
16' Tuba Magna 73 notes+
8' Tuba Mirabilis (ext 16')+
4' Tuba Clarion (ext 16')+
Tremulant
Solo to Solo 16'
Solo Unison Off
Solo to Solo 4'
MIDI on Solo A
MIDI on Solo B

TROMPETTERIA
(Manual V, enclosed with Antiphonal in gallery)
8' Tuba Mirabilis (Solo)
16' State Trumpet 85 notes+
8' State Trumpet (ext)+
4' State Trumpet (ext)+
2' Tierce Mixture V 305 notes+
16' Trompette en Chamade TC
8' Trompette en Chamade 61 pipes
4' Trompette en Chamade 49 notes

PEDAL (unenclosed)
32' Contre Diapason 32 notes+
32' Contre Bourdon 32 notes+
32' Contre Violone 32 notes+
16' Principal 44 pipes
16' Wood Open 32 notes+
16' Violone (Great)
16' Bourdon 44 pipes
16' Lieblich Gedeckt (Swell)
16' Quintaton (Choir)
8' Octave (ext 16')
8' Violone (Great)
8' Bourdon (ext 16')
8' Gedeckt (Swell)
4' Choralbass 32 pipes
4' Nachthorn 32 pipes
4' Rohr Flute (Great)
2' Octavin 32 pipes
2-2/3' Mixture V 160 pipes
32' Contre Bombarde 32 notes+
32' Contre Basson 32 notes+
16' Ophicleide 32 notes+
16' Trombone 12 pipes
16' Bombarde (Swell)
16' Contre Fagotto (Swell)
16' Corno di Bassetto (Choir)
8' Festival Trumpet (Solo)
8' Bombarde (ext 32')
8' Tromba (Solo)
4' Clarion (Solo)
4' Clarinet (Choir)
MIDI on Pedal A
MIDI on Pedal B

ANTIPHONAL PEDAL (enclosed)
32' Echo Bourdon 32 notes+
16' Principal 32 notes+
16' Bourdon (Antiphonal)
8' Octave 32 notes+
8' Gedeckt (Antiphonal)
16' Contre Trompette (Antiphonal)

+ Walker stops

Coupler Rail
Great to Pedal 8, 4
Swell to Pedal 8, 4
Choir to Pedal 8, 4
String to Pedal 8
Antiphonal to Pedal 8
Trompetteria to Pedal 8
Solo on Pedal (couplers follow through)
Swell to Great 16, 8, 4
Choir to Great 16, 8, 4
String to Great 8
Antiphonal to Great 16, 8, 4
Trompetteria to Great 8
Solo on Great (couplers follow through)
Swell to Choir 16, 8, 4
String to Choir 8
Antiphonal to Choir 8
Trompetteria to Choir 8
Solo on Choir (couplers follow through)
Antiphonal to Swell 16, 8, 4
Trompetteria to Swell, 8
String on Solo 8 (couplers follow through)
Trompetteria to Solo 8

Goulding & Wood, Inc.,
Indianapolis, Indiana
Opus 28 (1996) and Opus 49 (2009)
First United Methodist Church, Rocky Mount, North Carolina

From the organbuilder
One of the greatest pleasures we have as organbuilders is seeing the development of our relationships with the congregations whose churches house our instruments. We have found that our organs serve as catalysts for ongoing shared experiences with musicians, clergy, and lay people across a wide spectrum of geographic, demographic, and denominational ranges. We are grateful for our ever-growing circle of friends, many of whom feel like family. Nowhere is this truer than with the people of First United Methodist Church in Rocky Mount, North Carolina. We have continued to maintain close ties with the congregation even as the staff musicians have changed through the years. As such, it was with great excitement that we received word that the church was interested in fulfilling the preparations left on our Opus 28 instrument from 1996. As the conversation continued, the church further inquired about the realization of an Antiphonal division as well.
Discussion over this Antiphonal organ had been brief at the time of the chancel instrument installation. Console preparations to control the division were included, but no timeline was established for moving forward. Part of this preliminary design was to situate the instrument on the rear wall of the main sanctuary, allowing it to also speak into the adjacent chapel. The two rooms are perpendicular in orientation, with the back wall of the sanctuary serving as the side wall of the chapel. Although no definite decisions were made in 1996, the assumption was that the small Kilgen extension organ that served the chapel would provide a repository for the pipework of this very modest division.
As we considered the project more fully, it became apparent that the resources of the Kilgen organ were insufficient for either chapel or sanctuary use. Rather than using any sort of unit chest design, we proposed building an instrument employing a slider windchest with all new pipework. To maximize the flexibility of the organ for chapel use, we split the slider chest grid at middle C and furnished separate stop controls for bass and treble slides. The chapel console then accesses the instrument through divided stops, much in the way of a seventeenth-century English organ. This concept similarly influenced the specification, although the organ is not an attempt to copy any historical style. At the same time, the choice of a wooden Stopped Diapason, an elegantly thin Dulciana with matching celeste, and treble Cornet derives from English precedents. In scaling and voicing, however, the pipework adheres to the acoustical environment of both chapel and sanctuary, balancing with the tonal style of the chancel instrument so as to contribute to a satisfying musical ensemble when paired together.
In order to negotiate the dual uses of the organ, and to maximize the division’s expressive capabilities, the organ speaks through shade frames behind each façade. Upon turning on the chapel console, the shade frame facing into the main sanctuary closes and remains fixed, focusing all the sound into the chapel. Conversely, turning on the chancel console closes the chapel shades and allows the sanctuary side shade to be assigned to either the Swell or Choir shoe. All stops reside within the expression enclosure, including the 16′ Stopped Diapason. Within the chapel, the organ has a wide dynamic range, from the faint whisper of the Dulciana with the box closed to a satisfying full organ that fills the room with warmth. Although the chapel has a modestly sized floor plan, it has the same ceiling height as the main sanctuary. The proportions of the room, then, create a generous acoustical environment. The large cubic volume accommodates the abundant sound of the organ, while the placement of the instrument high on the wall distributes sound evenly, resulting in a musical presence that is embracing but never oppressive.
Mechanically, the organ is arranged in two levels, with the bass chest above the treble chest. Access for tuning and maintenance is easy throughout the layout despite the small size of the case. All mechanical systems and winding, including the blower, are located inside the case, yet the organization is logical and efficient. The division of the windchest into bass and treble facilitates imaginative use of the organ within the chapel. By drawing different combinations for right and left hands, two-manual repertoire can be rendered convincingly. Cornet voluntaries and trios with obbligato pedal are especially effective.
Tonally, the organ is typical of our organs in favoring fairly high cut-ups, substantial scaling, and thick-walled pipework, all of which encourages fundamental development. The Open Diapason is modestly scaled at 149 mm, taking into account the intimate context of the chapel. By contrast, the Stopped Diapason is a full 85 mm by 114 mm, adding thickness and weight to ensembles. Similarly, the 4′ Recorder is scaled at 81 mm with a 20th halving ratio and constructed of linen lead with a gentle 2:3 ratio taper. The Dulciana is a slender 88 mm at 8′ C and bearded for the first two octaves. Mouth widths are narrow, allowing for high cut-ups; all stops below 2′ pitch have 2/9 mouths, with the exception of the 4′ Recorder, whose first two octaves have 1/5 mouths. Only the treble of the 2′ and the Fourniture have 1/4-width mouths, restraining the upper end from growing glassy or obtrusive.
The current project also completed the chancel organ, rounding out the reed choruses in particular. The Great division received a new 16′ Fagotto, lending gravitas and weight to the ensemble. The Swell’s battery of reeds is now capped with a powerful 4′ Clairon, and the 16′ Basson is extended to 32′ pitch for the Pedal division. Other additions to the Pedal are a blending 8′ Trompete and solo 4′ Schalmei. Crowning the organ in the chancel is a commanding 8′ Bombarde with generous fundamental development and rich power. This reed also provides an effective contrast with the brilliant 8′ Fanfare Trumpet located within a section of the Antiphonal case partitioned from the main division. As such, it does not speak into the chapel, nor is it accessible by the chapel console. As an Antiphonal solo color, however, it is a thrilling presence in the room, able to stand up against full organ from the front. The only flue preparation was the 8′ Harmonic Flute on the Great, and the addition of this color opens up its own wealth of repertoire.
As with all of our recent work, the metal pipework for both the new instrument and the preparations was built by A. R. Schopp’s Sons, Inc. of Alliance, Ohio. Bob Schopp, David Schopp, Joe Russo, and their entire staff are a terrific resource and helpful partners in achieving the musical goals we seek. This job also required some sophisticated alterations to the chancel console solid-state systems, modifying controls built before the organ in back was even designed. We are grateful to Duncan Crundwell, Mark Gilliam, and Alan Bragg of Solid State Organ Systems for providing these changes and the new control systems, all of which worked from the start without a single glitch. Norman Y. Chambliss III of Chambliss and Rabil Contractors, Inc. ably and cheerfully coordinated the room modifications, including preparation of the rear wall to accommodate the steel support structure. Dr. Marcia Heirman, director of music for First United Methodist Church, has been a great friend to our shop throughout her tenure, and this project was especially fulfilling to embark upon with her. We look forward to watching as she continues to develop the music ministries of the church and incorporates the organ into the worship life of the congregation. We also wish to recognize the important work, sincere friendship, and unflagging support of the late Harry Pearsall. Harry was instrumental in the 1996 organ project, and we enjoyed keeping in touch with him through the intervening years. He was the first one to notify us of the prospect of this project in the spring of 2007, and he anticipated the completion of the organ with great eagerness. Unfortunately, Harry passed away in August shortly before the installation of the Antiphonal organ. We shall miss Harry’s kind smile and gentle presence on our future trips to Rocky Mount, and we are grateful to have this instrument as a testament to his perseverance and commitment to liturgical music in the church. May his dedication and stewardship serve as a reminder to all who hear the organ that, in the words of senior pastor Bob Bergland, music is “means of grace that people may come into the presence of God and have that experience of God’s nearness.”
—Jason Overall

Goulding & Wood, Inc.
Robert Duffy—case design and construction/supervision, installation
Mark Goulding—project team leader, installation
Robert Heighway—console design and construction, case construction, structure, installation
Phil Lehman—business manager, office support
Tyler MacDonald—slider chest construction, installation
Jason Overall—project development, onsite regulation
Tim Piotrzkowski—winding, chest construction, installation
Kurt Ryll—engineering and design
David Sims—voicing, console and system wiring, onsite tuning and regulation
Michael Vores—structure, winding, case construction, installation
Brandon Woods—tonal design and voicing

From the director of music
A long anticipated completion of the original 1996 Goulding & Wood (Opus 28) organ was realized in November 2009 as the company installed 1,048 additional pipes at First United Methodist in Rocky Mount. The installation included the addition of an Antiphonal division for the main organ, a new console in the chapel, the completion of the reed choruses in the chancel, a new fanfare trumpet in the antiphonal division for use in the sanctuary only, and a harmonic flute solo stop on the Great. Completed, the organ now fills the sanctuary with 69 ranks of beautiful and warm timbres.
The most obvious addition to the organ is the stunning Antiphonal division with a beautiful double façade, whose presence at the rear of the sanctuary fits so well architecturally it seems as if it has always been there. The chancel side of the double façade allows this division to be played independently from a new one-manual, split console in the chapel to serve as a new chapel organ. Independently, this organ is catalogued as Opus 49 by Goulding & Wood. The organ now embraces and surrounds the congregation with music and fills the large sanctuary without overpowering and overwhelming.
The organ completion was dedicated in the worship service on January 10. Upcoming dedication recitals will be presented by Dr. Monica Sparzak of Fayetteville, North Carolina, February 21; Dr. William Weisser of Edenton Street United Methodist in Raleigh, March 14; Christin Baker, sub dean of the East Carolina AGO chapter and an East Carolina University student, April 11; and Dr. Marcia Heirman with Lawrence Goering on May 16; all of these recitals will be at 4 pm. Coming in the fall will be Dr. Marilyn Mason, University Organist and Chairman of the University of Michigan Organ Department in Ann Arbor, Michigan; Dr. Michael Stefanek of Green Bay, Wisconsin; and Jeffrey Thompson of Goldsboro, North Carolina. Dates and times for the fall 2010 recitals will be announced later.
—Dr. Marcia Heirman

Goulding & Wood, Inc.
Opus 28 (1996) and Opus 49 (2009)
First United Methodist Church
Rocky Mount, North Carolina

Opus 28 Chancel Organ
(prepared pipework installed in 2009 listed in bold)
GREAT (Manual II)
16′ Violone
8′ Principal
8′ Violone (extension)
8′ Harmonic Flute
8′ Bourdon
4′ Octave
4′ Block Flute
2′ Super Octave
22⁄3′ Sesquialtera II (tenor c)
11⁄3′ Mixture IV
16′ Fagotto
8′ Trumpet
8′ Bombarde
8′ Fanfare Trumpet (hooded, in
Antiphonal case)
Tremulant
Great to Great 16
Unison Off
Great to Great 4
Chimes

SWELL (Manual III, enclosed)
8′ Geigen
8′ Geigen Celeste (tenor c)
8′ Stopped Diapason
4′ Principal
4′ Clear Flute
2′ Octave
11⁄3′ Quint
2′ Plein Jeu III–IV
1′ Cymbale II
16′ Basson-Hautbois
8′ Trompette
8′ Hautbois (extension)
4′ Clairon
8′ Fanfare Trumpet (Antiphonal)
Tremulant
Swell to Swell 16
Unison Off
Swell to Swell 4

CHOIR (Manual I, enclosed)
16′ Rohr Gedeckt (extension)
8′ Rohrflöte
8′ Salicional
8′ Salicional Celeste (tenor c)
8′ Flauto Dolce
8′ Flute Celeste (tenor c)
4′ Principal
4′ Spielflöte
22⁄3′ Nazard
2′ Spitzflöte
13⁄5′ Tierce
11⁄3′ Larigot
1′ Sifflöte
8′ Oboe
8′ Bombarde (Great)
8′ Fanfare Trumpet (Antiphonal)
Tremulant
Choir to Choir 16
Unison Off
Choir to Choir 4

PEDAL
32′ Resultant (from Rohr Gedeckt)
16′ Principal
16′ Subbass
16′ Violone (Great)
16′ Rohr Gedeckt (Choir)
8′ Octave
8′ Pommer
8′ Violone (Great)
8′ Rohr Gedeckt (Choir)
4′ Choralbass
4′ Koppelflöte
2′ Octavebass
11⁄3′ Mixture II
32′ Contre Basson (extension/Swell)
16′ Posaune
16′ Basson (Swell)
8′ Trompete
8′ Basson (Swell)
4′ Schalmei
8′ Bombarde (Great)
8′ Fanfare Trumpet (Antiphonal)

Opus 49 Antiphonal/Chapel Organ

MANUAL
8′ Open Diapason (1–13 in façade)
8′ Stopped Diapason
8′ Dulciana
8′ Unda Maris
4′ Principal (1–6 in façade)
4′ Recorder
2′ Fifteenth
22⁄3′ Sesquialtera II (from middle c)
11⁄3′ Fourniture II–III
Tremulant

PEDAL
16′ Stopped Diapason (extension of
Manual stop)
8′ Stopped Diapason (Manual stop)
Manual to Pedal Coupler

Chapel console: One-manual mahogany keydesk with natural keys in maple and sharps in rosewood. Stop controls divided bass and treble (b-24/c-25) except Fourniture, Dulciana, and Unda Maris.

Chest action: Goulding & Wood’s exclusive design of electro-pneumatic slider and pallet windchest.

Casework: Dual façades with two sets of speaking display pipes. Woodwork designed and painted to match church interior.

Goulding & Wood, Inc.
823 Massachusetts Ave.
Indianapolis, IN 46204

800/814-9690
[email protected]
www.gouldingandwood.com