Andover to restore 1906 Woodberry

Matthew M. Bellocchio, a Project Manager and designer at Andover Organ since 2003, is a Fellow and past President of the American Institute of Organbuilders.

Andover Organ Company marks seventy years

by Matthew M. Bellocchio

Anniversaries invite us to reflect upon our past and contemplate how far we have come. As 2018 marks Andover Organ Company’s seventieth anniversary, this article will highlight its long and rich history, from its humble beginnings to its recent achievements.

Andover was founded in 1948 as a result of an Organ Institute organized by Arthur Howes, head of the organ department at the Peabody Conservatory, and held each summer on the campus of Phillips Academy in Andover, Massachusetts. Howes had traveled extensively in Europe and observed the developing Organ Reform Movement there. Originating in Germany in the 1930s from Albert Schweitzer’s writings, the movement sparked an interest in early music and performance practices, as well as the building of new organs that could authentically render early music, especially that of Bach. Howes started the Organ Institute to help spread the Organ Reform Movement in America. The faculty included such notable organists as Carl Weinrich (Princeton University), Ernest White (St. Mary the Virgin, New York City), and E. Power Biggs.

Tom Byers, a former Henry Pilcher’s Sons Organ Company employee who lived in nearby Lawrence, Massachusetts, attended the annual institute with his wife. He was inspired to start an organ company that would follow the institute’s philosophy. He chose the name “Andover” for its prestigious association with the Organ Institute and because of the advantages, in the pre-internet days of telephone directories, of appearing near the top of the alphabetical company listings. 

Byers chose the opening line of Psalm 98, “Cantate Domino Canticum Novum” (Sing to the Lord a New Song), as the company motto, which still appears on Andover’s letterhead. This underscored his philosophy of creating a new style of organ, one that looked and sounded differently from what most American organ companies were producing.

Despite its name, the company has never been located in Andover! It started out in the home of Tom Byers in Lawrence, just north of Andover, and later moved to a two-story wooden building in nearby Methuen. In 1979 the company purchased a three-story brick building in a former mill complex at 560 Broadway in Lawrence, where it has been ever since.

Leadership and people

Rather than having a single leader dictate the company’s course, Andover’s many talented employees have each contributed to the company’s development. The company has always been owned and run by its principal employees who, serving as its shareholders and board of directors, make decisions collegially.

Charles Fisk joined the company in 1955 as Tom Byers’s junior partner. Robert J. Reich, a Yale-trained electrical engineer, was hired in 1956, and Leo Constantineau, a woodworking teacher and professional draftsman, in 1957. In 1958, Byers left the company, and Fisk became the owner. Walter Hawkes, who had worked for Holtkamp, was hired as shop foreman. Later that year, Andover signed a new organ contract with Redeemer Lutheran Church in Lawrence, Massachusetts. The contract did not specify the type of action. But the result, premiered on Palm Sunday 1959, was the first new mechanical-action organ built by an American firm in the postwar era. That instrument, Opus 28, is still in use.

The following year, Opus 35, a 33-stop tracker designed by Leo Constantineau and voiced by Charles Fisk, was built for Mount Calvary Episcopal Church in Baltimore, where Arthur Howes was organist. Fisk left Andover in 1961 to start his own company,
C. B. Fisk, in Gloucester, Massachusetts. Andover was reincorporated with Robert J. Reich and Leo Constantineau as the new owners. Reich, who became the Tonal Director, revised Andover’s pipe scales to provide more foundation tone. Constantineau’s case designs gave the company’s new instruments a distinctive visual flair. 

Andover has been blessed with several dedicated individuals who each worked over fifty years at the company. Reich, who joined Andover in 1956, served as President and Tonal Director 1961–1997; he then worked part-time until retiring in 2009. Donald Olson joined the company in 1962 and became Andover’s general manager and visual designer in 1968. His elegant case designs were the hallmark of Andover’s new instruments for nearly four decades. He succeeded Robert Reich as President in 1997, stepped down in 2012 and then worked part-time until fully retiring in 2015. Robert C. Newton, who started at Andover in 1963 and headed the Old Organ Department for many years, retired in 2016.

Andover’s current President, Benjamin Mague, joined Andover in 1975. He holds a Bachelor of Arts degree in music from Colby College and a Master of Music degree in organ from the University of Wisconsin. He served as Andover’s mechanical designer and later as shop foreman before becoming President in 2012. 

John Morlock, Andover’s Tonal Director since 1999, joined the company in 1976, working principally in the Old Organ Department. Don Glover, Andover’s in-house reed voicer, came to Andover in 2004 from the Reuter Organ Company.

Michael Eaton, Andover’s visual designer, joined the company in 1991. He also heads a maintenance team and serves as Treasurer and Clerk for Andover’s board of directors.

Andover’s present team of dedicated and talented people collectively possess over 350 years of organbuilding experience. Other current employees are Ryan Bartosiewicz, Matthew Bellocchio, Eric Dolch, Anne Doré, Andrew Hagberg, Lisa Lucius, Kevin Mathieu, Fay Morlock, Jonathan Ross, Craig Seaman, and David Zarges. Appropriately, more than half of Andover’s employees are church musicians or organists.

Andover has been the parent for many other New England tracker organ companies, having employed over its seventy years many talented individuals who later founded their own companies. These include Philip Beaudry, Timothy Fink, Charles Fisk, Timothy Hawkes, Richard Hedgebeth, Fritz Noack, Bradley Rule, J. C. Taylor, and David Wallace.  

Tonal style

Tonally, the early Andover organs were inspired by the Organ Reform Movement. At the time of Andover’s founding, few American companies were repairing old tracker organs; most just electrified or replaced them. Andover was the first to deliberately retain and renovate nineteenth-century trackers. But, adhering to the Organ Reform philosophy, Byers and his early successors often “improved” those organs tonally. It was not unusual for them to evict the string stops and replace them with mixtures and mutations. Andover’s new instruments came to be characterized by strong Principal choruses with bright mixtures, colorful neo-Baroque style flutes and mutations, and reeds that emphasized chorus over color. 

In the 1980s, as Andover began more frequently to work on significant nineteenth-century American organs, a gradual transition occurred. This was solidified in 1999 when John Morlock, who had started in Andover’s Old Organ Department, succeeded Robert Reich as Tonal Director.

Today, Andover’s tonal style may best be described as “American” and is grounded primarily in the best practices of the nineteenth-century New England builders, in particular the Boston firm of E. & G. G. Hook. Their organs, especially those from the firm’s “golden period” (1850s to 1870s), are admired for their remarkably successful blend of warmth and brilliance. Their pipe scales and voicing techniques worked extremely well in the dry acoustics of many American churches. 

When designing a new organ or reworking an existing instrument, we basically use the same scaling proportions between the various stops of the chorus that the Hooks used. We have found that doing so results in a principal chorus that is nicely balanced between fundamental weight and harmonic development.

Within this framework, adjustments are made to reflect or, in some cases, compensate for the acoustical properties found in each room. Each instrument needs to work and sound well in its “home” and be able to perform its tasks capably and effectively. Andover organs are designed to lead and support congregational hymn singing, as well as interpret a wide range of organ literature.

Maintenance

From the very beginning, organ maintenance was an important part of the company’s work. It created name recognition, established relationships with churches and organists, and provided a consistent revenue stream. Today, Andover maintains over 300 organs annually throughout the Northeast, Mid-Atlantic, and Southeast—from northern Maine to South Carolina, from western New York to the islands off eastern Massachusetts. These instruments range in size from small one-manual trackers in country churches to the world-famous Great Organ (IV/116) in the Methuen Memorial Music Hall; and range in age from a few years to a historic 1762 Snetzler organ. 

We service all types of organ mechanisms—from traditional tracker action to modern solid-state relays and combination actions. Each spring and fall, we schedule extended maintenance tours to visit multiple instruments in a geographical area. This enables our customers to share the travel expenses. 

Many customers treat us like old friends. Occasionally, a church secretary or organist will call us and merely say, “This is so-and-so at First Parish Church,” not realizing that we have over three dozen tuning customers with that name!

Andover Organ firsts

As the leader in the mid-twentieth century tracker organ revival in America, Andover pioneered many innovations that are now standard in the industry. Opus 25, a two-manual built in 1958 for the Rice Institute (now University) in Houston, was an electro-pneumatic instrument utilizing slider chests with pneumatic pallets, one of the first examples of this pallet type. This was decades before the adoption of the “Blackinton-style” pneumatic pallet.

In 1961, Andover carried out the first historically sympathetic restoration of a nineteenth-century American organ: the 1-manual, 1865 E. & G. G. Hook Opus 358 at the Congregational Church in Orwell, Vermont (Andover Opus R-1.)  

Other significant Andover (AOC) restorations include: 

• First Presbyterian Church, Newburyport, Massachusetts (1866 E. & G. G. Hook/AOC 1974); 

• First Parish Church, Bridgewater, Massachusetts (1852 E. & G. G. Hook/AOC 1977); 

• South Parish Congregational Church, Augusta, Maine (1866 E. & G. G. Hook/AOC 1982); 

• Church on the Hill, Lenox, Massachusetts (1869 William A. Johnson/AOC 2001); 

• Old Whaling Church, Edgartown, Massachusetts (1850 Simmons & Fisher/AOC 2004); 

• Centre Street Methodist Church, Nantucket, Massachusetts (1831 Thomas Appleton/AOC 2008); 

• St. Peter’s Catholic Church, Haverstraw, New York (1898 Geo. Jardine & Son/AOC 2011); 

• St. Anna’s Chapel, Newburyport, Massachusetts (1863 William Stevens/AOC 2013).

Utilizing its expertise gained from restoring old tracker organs and building new ones, in 1963 Andover was the first company in the world to re-trackerize an old tracker organ that had been electrified. The instrument was the 1898 James Treat Opus 3 at St. George’s Primitive Methodist Church (now Bethesda Missionary Church) in Methuen, Massachusetts.

Other notable re-trackerizations: 

• First Presbyterian Church, Waynesboro, Virginia (1893 Woodberry & Harris/AOC 1986); 

• St. John’s Episcopal Cathedral, Providence, Rhode Island (1851 E. & G. G. Hook/AOC 1989); 

• Westminster Preservation Trust, Baltimore, Maryland (1882 Johnson & Son/AOC 1991); 

• Sage Chapel, Northfield, Massachusetts (1898 Hook & Hastings/AOC 1996); 

• Unitarian Society, Peterboro, New Hampshire (1867 E. & G. G. Hook/AOC 2003); 

• Christ Episcopal Church, Charlottesville, Virginia (1869 E. & G. G. Hook/AOC 2012).  

The slider and pallet windchests used in most nineteenth-century organs were generally trouble free for many years. However, when heating systems were introduced into churches in the early twentieth century, problems developed. The solid wood chest tops (tables), just below the sliders, were made from a thin, wide plank of air-dried lumber. With constant heating the wooden tables dried out and cracked, allowing air to leak from one pipe hole to the next, resulting in “runs.” 

Andover was the first American company to replace a cracked, solid-wood table with a marine-grade plywood one. The routed bleed channels between the table’s wind holes were then carefully replicated and the entire table graphited, like the original. This type of table replacement is now standard in the industry. The first organ to receive this treatment, in 1965, was the 1897 George W. Reed, at the Baptist Church in Winchendon, Massachusetts. Sadly, the organ burned with the building in 1985. 

One of Andover’s most significant recent projects was the 2016 restoration of the wind system and key action in the 1892 Woodberry & Harris Opus 100 at St. Mary–St. Catherine of Sienna Parish in Charlestown, Massachusetts. With three manuals, 36 stops, and 41 ranks, it is the largest and most significant nineteenth-century organ remaining in original unaltered condition in the greater Boston area. 

The instrument’s action is entirely mechanical and incredibly complex. The three-manual, reversed detached console sits in the center of the gallery, while the pipes and windchests are in cases at either side of a large stained-glass window. Four levels of trackers descend from the keys to squares beneath the floor, then under the console towards the rear window, then turn off at right angles towards the sides, then turn off again at right angles towards the rear, then to squares which send them up to the rollerboards below the chests. The organ’s four divisions have a total of 17 sets of wooden trackers, totaling nearly a mile in length! A Barker machine lightens the touch of the Great and the manuals coupled to it.

The two large reservoirs were stripped and releathered in place. All four layers of trackers were disassembled, labeled, and brought to the shop for replication. Because of the organ’s historic significance, all the new trackers were made of the same materials as the originals but using modern machinery. Andover customized a miniature CNC router to notch the cloth-wrapped tracker ends and built a spinning machine to whip the threaded wire ends with red linen thread, just like the originals. The Barker machine was carefully releathered. “Now she runs like a Bentley,” said one of the instrument’s many admirers.

Rebuilding for reliability

A conservative restoration is the logical decision for an exemplary work by an important builder or a small organ in a rural church with modest musical requirements. But sometimes it is necessary to strike a balance between preserving the original fabric and updating it to suit modern needs. An organ that has already endured several unsympathetic rebuilds, or an aging instrument with unreliable mechanisms and limited tonal resources, in an active church or institution with an ambitious music program might be better served by a sympathetic rebuilding. This was the case with two of Andover’s most significant rebuilds.

The 1876 E. & G. G. Hook & Hastings Opus 828 at St. Joseph Cathedral in Buffalo, New York, was built as a showpiece for the 1876 “Centennial Exposition” in Philadelphia and purchased afterwards by the cathedral. Major changes were made to the organ by Tellers-Kent Organ Company in 1925 and by Schlicker Organ Company in 1976. By 1996, the organ was virtually unplayable during the winter months and a decision of whether to replace it or rebuild it was imminent. In 1998, the cathedral decided that “the organ need not be replaced, but rather completely rehabilitated.” At the same time, the organ’s tonal palette needed expanding to better serve the musical needs of the cathedral and to enable it for use in concerts and recitals.

A team from Andover dismantled the organ in July 1999, loaded it into two moving vans, and transported it back to Lawrence, where eighteen employees labored for more than a year to clean, repair, and expand the instrument. In undertaking this immense job, Andover sought to retain and restore as much of the original as possible. The entire organ was cleaned, and the black walnut case stripped of coats of dark varnish and restored to its original finish. The façade pipes were stripped and repainted in their original designs with colors that harmonized with the cathedral’s interior.

All the original chests and pipework were rebuilt and repaired. The manuals were expanded to 61 notes and the pedals to 32. The two original reservoirs were releathered and two new ones constructed. The Choir is now unenclosed, as it originally was, the Swell box is back to its original size, and the Solo is restored to its original position.

Many of the missing original pipes were replaced with pipes salvaged from the Hook 1877 Cincinnati Music Hall organ, Opus 869. Other compatible Hook organs were visited to develop pipe scales appropriate for the additions to the cathedral organ, which were voiced in the Hook style. The organ is now far closer to its original sound than it has been since the 1923 electrification and rebuilding.

A new floating Celestial Division on a slider windchest was added. This division was based on contemporary E. & G. G. Hook solo divisions, as typified by the organs in the Cincinnati Music Hall and Mechanics Hall, Worcester. There is an 8′ Philomela copied from the 1863 Hook at Church of the Immaculate Conception in Boston, an original Hook 4′ Hohlpfeife, a 2′ Harmonic Piccolo, a Cor Anglais, and a few more modern stops stops such as a French Horn, Dolcan Gamba with Gamba Céleste, Spitzflöte and Spitzflöte Céleste. 

Thomas Murray played the rededicatory recital on June 11, 2001. The St. Joseph Cathedral organ will be featured in a recital by Nathan Laube during the American Guild of Organists Northeast Regional Convention, July 1–4, 2019.

In contrast to the Buffalo cathedral organ, the 1902 Hook & Hastings Opus 1833 at St. John’s Seminary in Brighton, Massachusetts, was a modest two-manual, 18-rank instrument. After nearly a century of use and constant winter heating, the windchests and actions developed serious problems. The original console was replaced in 1946. When the replacement console failed in 2004, a one-manual tracker was put in its place to serve as a temporary instrument until the chapel organ could be rebuilt. 

Our lengthy experience with Hook & Hastings organs taught us that their early electro-pneumatic actions were cumbersome, slow, and difficult to repair. Therefore, in our 2014–2015 rebuilding of the organ, we reused the pipes, windchests, and most of the original parts as the basis of an expanded instrument with a new electric action.

We built a new, solid white oak console in the style of the Hook & Hastings original, with a lyre music rack and elliptically curved stop terraces. To meet the demands of a twenty-first century music program, this reproduction console has state-of-the-art components, including a record/playback module. The façade pipes were stripped and repainted with a new decorative treatment that harmonizes with the Italian Renaissance-style case and chapel. As a crowning flourish, the cross surmounting the case was painted in faux lapis lazuli.

Most of the organ was crammed within the small case, with Swell above Great and the wooden Pedal 16′ Open Diapason pipes at each side. Behind the Swell, in an unfinished gallery, were the organ’s large reservoir and Pedal 16′ Bourdon. We moved the Pedal Open Diapason pipes to the rear gallery and added a Pedal 32′-16′-8′ Trombone and 8′-4′ Principal there. Judicious additions to the Swell expanded its resources. There was sufficient space inside the case behind the Great chest to add a seven-stop unenclosed Choir division.

The end result of these tonal changes and additions is an instrument of 40 stops, 34 ranks, and 1,994 pipes that is more versatile and appropriate for its expanded role. It still sounds very much like a Hook & Hastings organ, but one from an earlier and better period of the firm’s output.

Façade firsts

The company’s work with historic organs gradually led to pipe façade restorations as well. In 1967, Andover was the first American company to make restorative paint repairs to a painted and stenciled pipe façade, at the First Congregational Church in Georgetown, Massachusetts (1874 Joel Butler). Thirteen years later, in 1979, during its rebuilding of the 1884 Geo. S. Hutchings Opus 135 at the Vermont College of Fine Arts in Montpelier, Vermont, Andover carefully stripped a coating of green paint from all the façade pipes, documented the original designs and colors underneath, and repainted the pipes in their original colors and stenciling—another first.

Andover’s Opus 102 (1992) at Trinity United Church of Christ in York, Pennsylvania, was the first new American organ in the modern era to feature painted façade pipes with nineteenth-century style colored bandings. The upper façade flats of this organ contained another first: “frosted tin” pipes, which feature the natural, unplaned finish of the cast tin sheets. This gives them the light color of tin, but with a dull, non-reflective finish.

In recent years, Andover has worked with historic painted decoration conservator Marylou Davis to create new painted-pipe decorations in historically inspired styles. The most notable example of this collaboration is the 82-rank Andover Opus 114 (2007) at Christ Lutheran Church in Baltimore. This was the first twenty-first century American organ façade to combine polychromed and monochrome texture-stenciled pipes, frosted tin pipes, and numerous hand-carved pipe shades, grilles, finials, and skirtings in the casework. 

Opus 114 is also Andover’s first dual-action, double organ. The 13-rank, electric-action gallery organ can be played from its own console or from the front organ’s three-manual mechanical-action console. Likewise, the entire front organ can be played from the two-manual gallery console through couplers and general pistons. The organ’s four matching cases (two in chancel, two in gallery) perfectly suit the church’s Gothic architecture and fool many people into thinking that they were reused from a 19th-century organ. 

Andover has never been afraid to fit an organ around a prominent window. This reflects our design philosophy that an organ should look as if it has always been part of its environment. And in most churches, the window was there long before the organ. Fighting the window can sometimes be a losing battle. Opus 115 (2007) at Church of the Nativity in Raleigh, North Carolina, and Opus 118 (2014) at First Parish Church in Wayland, Massachusetts, illustrate Andover’s creative approach in dealing with windows.

In Raleigh, the modern clear glass window was front and center, at the top of the space where the organ would go. We designed the organ case to frame the window’s central orb and cross. The polished tin façade pipes match the brightness from the window. The organ also serves as a reredos for the altar, which stands in front of it. Looking from top to bottom, one sees the window, the organ, and the altar—light, music, action. The church was very pleased with the result, as were we.

In the 1820 Federal Period meetinghouse in Wayland, there was an elegant Palladian window in the center of the back wall of the rear gallery. Because of the semi-elliptical curve of the gallery’s rear wall, the only apparent organ placement with such a floor plan was in the center. Thus, all the previous organs had blocked the window. Andover’s design put the detached console in the center, by the railing, and divided the organ into two cases that frame, rather than cover, the Palladian window. The choir members sit in the space between the console and cases and benefit from the natural backlighting provided by the window. Again, everyone was pleased with the results.

Seventy years after its humble beginnings, Andover has much to celebrate: 118 new organs and 533 rebuilds/restorations. Andover’s wide-ranging work in building, rebuilding, restoring, and maintaining pipe organs is well-recognized, and best summarized by its mission statement: “Preserving the Past; Enhancing the Present; Inspiring the Future.”

www.andoverorgan.com

David Fienen is Emeritus Professor of Music at Gustavus Adolphus College, St. Peter, Minnesota. At Gustavus, he was Cantor at Christ Chapel, taught organ, music theory, chaired the music department, and served as provost and dean of the college his last two years before retirement.

Sitting under a shade tree in his backyard last summer, sipping iced tea with Charles and Birgitta Hendrickson, I asked him about his philosophy of organ building. His immediate answer was, “If I can make them [the congregation] sing, I have succeeded.” To make them sing—what a fine goal!

First a physicist

Minnesota native Charles Hendrickson grew up in Willmar, Minnesota, where his father had a law practice. During Charles’s young years, his father, Roy, was also chair of the board of trustees at Gustavus Adolphus College (Roy’s alma mater) in St. Peter, Minnesota, from 1945–53. After Roy passed away in 1954, Charles’s mother, Frances, was hired as secretary to President Edgar Carlson at Gustavus from 1955–ca. 1967. Charles had already started his college career at Gustavus, and now the rest of his family moved to St. Peter. In 1957, Charles graduated from Gustavus with a Bachelor of Arts degree in physics and mathematics. It is interesting that he is not the only organbuilder with a physics background—Charles Fisk worked for Robert Oppenheimer on the Manhattan Project before he began building organs.

After college, Hendrickson started graduate studies at the University of Minnesota for one year, then taught physics at Superior State Teachers College (now University of Wisconsin-Superior, Superior, Wisconsin) for a year. He earned his Master of Science degree in physics at the University of Arkansas while also teaching for a year at Union University in Jackson, Tennessee (and serving as head of the department!). He also taught at Northeast State University in Oklahoma before returning to Minnesota to teach physics at Mankato State College (now Minnesota State University Mankato) for a couple of years.

In 1964, Charles married Birgitta Gillberg at Gamla Uppsala Church in Sweden. Birgitta, a native of Sweden, was teaching Swedish at Gustavus at that time. She continued teaching at Gustavus until Eric was born in 1967. She then returned to her academic career in 1975, teaching Swedish and German at Minnesota State University Mankato for 30 years until her retirement.

Hendrickson Organ Company: Beginnings

Hendrickson’s interest in the pipe organ began early in his young life, in 1953, when he watched with fascination as the Möller organ was rebuilt and reinstalled at Bethel Lutheran Church in Willmar. Harry Iverson, who was the Möller representative, supervised the regulation and work at the church, and Hendrickson got involved as a “gopher.” Iverson had previously been the Kimball representative and had designed the Minneapolis Auditorium Kimball organ. During graduate school, Hendrickson followed up on this early interest by working on organs (servicing, repairing, moving, tuning) on a part-time basis.

In 1964, Charles Hendrickson was asked to rebuild and significantly enlarge the 1910 Hillgreen-Lane organ in First Lutheran Church in Winthrop, Minnesota, by the pastor of the church, who was a family friend. Pastor Lambert Engwall had talked his congregation into undertaking the project to enlarge the organ in the church, had raised the money for the project, and convinced Hendrickson to tackle this project. As it was already part way through spring semester, Hendrickson resigned his teaching position at Mankato State and thus committed himself to being an organbuilder.

Several interesting things about this instrument, Opus 1, produced by the nascent Hendrickson Organ Company, are worth noting:

• The Swell division consists of pipes from the previous instrument, with new Hauptwerk, Positief, and Pedal divisions. The casework was mostly new to house the new organ.

• The Positief division was housed in its own case cantilevered on the balcony rail—in Rückpositiv position. This was the first Rückpositiv built in Minnesota.

• Hendrickson rented space in the empty Green Giant canning plant in Winthrop to build the organ with three helpers. (This is reminiscent of how older organ builders like Schnitger operated—building on site or at least in the vicinity of the church.)

• The new pipes added to this organ came from Organ Supply.

• Composer David N. Johnson, then on the faculty of St. Olaf College, played the dedication recital in September 1965.

• In 1982, Hendrickson added two mutations and swapped out two flute ranks, bringing the instrument to 36 ranks.

At about the same time, Hendrickson was asked by his home congregation, First Lutheran Church in St. Peter, Minnesota, to build a “temporary” organ for their new sanctuary then under construction to replace the church that had been destroyed by lightning on Mother’s Day in 1962. He readily complied by assembling a two-manual, eight-rank instrument, partly from salvaged materials. The outstanding acoustics of the building helped this small instrument to be amazingly successful, and it also included a horizontal trumpet! This temporary instrument, Opus 2, installed in 1965, remained in the church longer than expected. It was not replaced until his Opus 45 was completed in 1979, a two-manual, 44-rank instrument with a third coupler keyboard.

Opus 3 was another enlargement project, this time resulting in a two-manual, 30-rank instrument at Grace Lutheran Church, Mankato, Minnesota, using some ranks, offset chests, blower, and console from the previous two-manual, nine-rank M. P. Möller organ built for Grace Lutheran’s previous building. This instrument was also subsequently expanded in 1992 by adding a new Great division, horizontal trumpet, new three-manual console, and other tonal and mechanical revisions (Opus 86, three manuals, 41 ranks).

From these beginnings of the Hendrickson Organ Company in 1964, there followed several new instruments, including Opus 6, of two manuals, eight ranks, at St. John Lutheran Church in Yankton, South Dakota, and Opus 9, of two manuals, 24 ranks, at Blessed Sacrament Catholic Church in La Crosse, Wisconsin, plus more revisions, enlargements, and rebuilds, leading up to Opus 10 in 1970. Interestingly, the Yankton instrument, a larger version of Opus 2, came about because Harold Spitznagel was the architect of both First Lutheran Church in St. Peter (which housed Hendrickson Opus 2) and of St. John Lutheran Church in Yankton (Opus 6). The Yankton instrument originally contained only eight ranks, later enlarged to 12 after a fire in the church in 2009.

It is worthwhile to look further at the early influences on Hendrickson. He is largely a self-taught organbuilder, learning by experience, by voracious reading, and from the influences of Russ Johnson (an acoustician) and Robert Noehren (an organbuilder, performer, and teacher himself). Around the time Hendrickson was starting to build his Opus 1 and Opus 2, he met Robert Noehren at the Central Lutheran Organ Symposium in Minneapolis. From Noehren he became convinced to use primarily all-electric action when building electric-action instruments. And from Noehren, he learned the concepts of judicious borrowing and duplexing to retain clarity in the resulting organ while realizing some economies of budget and space. His Opus 1 at Winthrop used electro-pneumatic chests for the Great and Swell, but all-electric for the Positief. Subsequently, he primarily (though not exclusively) used all-electric chests when building non-mechanical-action instruments.

The Hendrickson factory

The year 1970 saw a new chapter unfold. Hendrickson was contacted by William Kuhlman, professor of organ, to build a new organ for Luther College in Decorah, Iowa. Most of his work prior to this time had been accomplished in his basement, garage, rented facilities, or on site. Now, in order to have a tall erecting room, he took the plunge, purchased land in the industrial park in St. Peter, and built the first part of his organ factory, including in the center a tall room where he could set up this two-story instrument. The organ for Luther College, Opus 10, of two manuals, 35 ranks, was his first mechanical-action instrument. 

This organ was intended as a teaching, practice, and performance instrument, and was built on a movable platform like a hovercraft so it could move to a neighboring room. Subsequently, it was relocated to a permanent teaching studio on the campus, the floating mechanism disabled, and an electric-action, unified trumpet rank on the Great was reinstalled as an 8′ horizontal reed, playable from the mechanical action. Due to heavy use, the keyboards have been replaced twice on this instrument.

The original factory consisted of a tall central erecting room, with the office in the back as an upstairs room, and two flanking rooms for wood work, pipe set up, and voicing. The equipment included the voicing machine originally built by Vogelpohl & Spaeth in New Ulm, Minnesota, in the late 19th century. Over the years, a sizeable building was added behind the original shop, including an assembly room and new voicing room, with the earlier flanking rooms repurposed. Later still, another former business building was moved to adjoin the addition, becoming the office, drafting studio, and library storage for the extensive collection of books and organ journals kept close at hand. (Hendrickson has every issue of The Diapason since 1913, and of The American Organist since 1929!) A large warehouse was added next door for much-needed storage and to house the spray booth. Interestingly, after a tornado struck in 1998, both this author and the Gustavus chaplain rented space in the warehouse to store all of our furniture while our houses were being rebuilt. More recently, a disastrous fire in November 2013 engulfed the original shop building. (Andreas Hendrickson, Charles’s younger son, designed a replacement shop building, which has been recently completed.) Fortunately, the added buildings were separated enough that they were not damaged, and no organs were destroyed except for some wood pipes, machinery, and some supplies. 

With Opus 10 for Luther College, Hendrickson began building mechanical-action instruments, either with mechanical stop action or electric stop action. A significant portion of the organs built by the firm feature mechanical action. When asked, Hendrickson expressed his preference for this type of action “just because I like it.” He also indicated he felt such instruments are “very satisfying” and provide the “best possible solution.” But Hendrickson indicated that throughout his career, he particularly wanted to “satisfy a need.” This is a most salient point—he set out to provide a good musical instrument for a wide variety of situations, large and small, and while his preference would be a tracker organ, sometimes placement, finances, or other considerations necessitated using electric action. If that were the case, he set out to make it the best it could be. Not infrequently, his project working with a church to improve their musical resources would also involve redesigning either the chancel or the balcony to facilitate placement of the new instrument and the location of the choir and/or the liturgical appointments.

During the half-century so far of the Hendrickson Organ Company, the firm has been involved in a wide variety of organ projects, building large and very small instruments, restoring, rebuilding, and expanding both historic instruments and some of their own, adding single divisions and/or replacing consoles—a variety of, as Charles said, “solving problems” for particular situations and congregations. To comment on each of the many projects (opus numbers) undertaken by the Hendrickson Organ Company would occupy far more space than is possible here; instead, a summary is presented, featuring a few interesting examples. 

Mechanical-action instruments

There are 27 mechanical-action organs on the Hendrickson opus list, ranging from a practice instrument with one 8′ flute for each of two manuals and pedal (Opus 33) to his largest instrument at Wayzata Community Church in Wayzata, Minnesota (Opus 92, four manuals, 70 ranks). The Wayzata instrument is unusual in that it incorporates a large Paul Granlund bronze sculpture in the middle of the façade.

Other sizable mechanical-action organs include Opus 47, a three-manual, 43-rank organ in St. Wenceslaus Catholic Church, New Prague, Minnesota, and Opus 35, a three-manual, 59-rank instrument at Sts. Peter and Paul Catholic Church, Mankato, Minnesota. These large instruments have mechanical key and stop action. The New Prague instrument leans toward a French Classic style, though not exclusively. The later Opus 78, of three manuals, 62 ranks, at St. Joseph Cathedral in Sioux Falls, South Dakota, utilizes a multi-channel electric stop action. It was also an instrument of a more complex design because of its size and the necessity for a detached keydesk. Hendrickson also had to redesign the gallery choir risers to accommodate the new organ. All three of these instruments were placed in rear balconies, and the Mankato and New Prague installations feature Rückpositiv divisions.

While most of Hendrickson’s two-manual mechanical-action instruments contain between 12 and 29 ranks, the largest is Opus 45, a two-manual, 44-rank instrument completed in 1979 at Hendrickson’s own church, First Lutheran Church, St. Peter, Minnesota. This instrument finally replaced the “temporary” Opus 2 that he had built nearly 15 years earlier. The organ features a horizontal trumpet on the Great (as had Opus 2) but also includes a trumpet within the case for that division. For this instrument, Hendrickson used a chassis from Laukhuff, Pedal division façade pipes made of aluminum, and a third manual as a coupler manual. This instrument is housed in an excellent acoustical environment and is a particularly successful installation. Marie-Claire Alain examined the organ upon completion and played the dedication recital.

In addition to these full-size tracker organs, the company built five portative organs consisting of one manual (no pedal) with 8′ flute, 4′ flute, and 2′  principal stops. The first such instrument was built for the St. Olaf Choir (Opus 16) and was intended to be able to be transported in a regular coach bus (with a couple of seats removed). To fit that size, the instrument has a short octave in the bass (lacking C#, D#, F#, and G#) and the compass is an octave shorter in the treble than a normal 61-note compass. In addition, the keyboard folds down inside the case, thus fitting through a bus door (at least back in the early 1970s). The stops are divided between bass and treble. The blower is also enclosed in the case, which is mounted on casters and has handles for ease in lifting and moving it around. After a second version was ordered by the Rockford Kantorei in Rockford, Illinois (Opus 18), three more instruments were built—“for every board we cut, we cut three.” These instruments eventually found their way to the University of Wisconsin in River Falls, Wisconsin (Opus 30), Concordia College in Moorhead, Minnesota (Opus 81), and Gustavus Adolphus College in St. Peter, Minnesota (Opus 72a). The organs are principally used for continuo playing.

Electric-action instruments

The Hendrickson opus list includes nearly 60 electric-action instruments. Thirty of these projects involved organs with fewer than 20 ranks, most incorporating at least some borrowing or duplexing, using the ideas Hendrickson had acquired from Robert Noehren. Many of these instruments use all-electric chests, as mentioned above. However, for Opus 60, a two-manual, 19-rank organ built for First Lutheran Church in Glencoe, Minnesota, the builder used slider chests with electric pull-downs. The largest two-manual electric-action instrument is Opus 25, of two manuals, 38 ranks, installed in First Lutheran Church, St. James, Minnesota (another instrument with a horizontal trumpet).

A dozen three-manual instruments (and one four-manual) contain 30 to 54 ranks. Beginning with Opus 1 (three manuals, 34 ranks), the list includes many significant enlargements of instruments by Möller, Aeolian-Skinner, Austin, Hillgreen-Lane, and Schantz, the largest being the expansion of a 1961 Schlicker (three manuals, 32 ranks) as Hendrickson Opus 100 (three manuals, 54 ranks) for Our Savior’s Lutheran Church, Sioux Falls, South Dakota. Two notable large all-new instruments are Opus 51 (three manuals, 46 ranks) at St. Mark Catholic Church in St. Paul, Minnesota, and Opus 34 (three manuals, 51 ranks) at St. John’s Lutheran in Owatonna, Minnesota (yet another organ with a dramatic horizontal trumpet). The Owatonna instrument also uses pallet and slider chests with electric pulldowns.

What is clear from all these instruments is that Charles Hendrickson and the many workers over the years in the shop were interested in creating or improving musical instruments that would “make them sing,” whether in the big city or the small country church. Hendrickson always endeavored to learn from the past, from his own experience, and from the lessons the industry had learned, whether from books or from his colleagues in the business. He was not interested in modeling after a particular style or a particular period, nor was he dogmatic about actions or particular stops, but was focused on a clear, singing tone and satisfying the particular needs of a group of people assembled in a specific congregation.

Rebuilds, restorations, and
renovations of 19th– and early 20th-century organs

The company website (www.hendricksonorgan.com) lists over 116 opus numbers. They include more than two dozen rebuilds, renovations, and restorations, notably:

• Rebuilding and enlarging the 1862 Marklove organ in the Cathedral of Our Merciful Savior in Faribault, Minnesota (Opus 70, two manuals, 34 ranks), using many of the original pipes—possibly the oldest pipes in Minnesota;

• Rebuilding two other late 19th-century organs, one by Hutchings, Plaisted & Co. (Opus 40, two manuals, 21 ranks), and the 1896 Kimball tubular pneumatic instrument located in the Union Sunday School in Clermont, Iowa (Opus 51a, two manuals, 27 ranks). The latter is the largest remaining tubular-pneumatic Kimball in original condition;

• Restoring, rebuilding, or revising several early 20th-century instruments by Hinners, Hillgreen-Lane, Kimball, Estey, and Vogelpohl & Spaeth (a late 19th/early 20th-century Minnesota builder);

• Maintaining, revising, and renovating the large four-manual, 52-rank Hillgreen-Lane organ in Christ Chapel at Gustavus Adolphus College in St. Peter, Minnesota, especially after the 1998 tornado severely damaged the entire campus and community. Organ repairs included cleaning all reeds, re-racking pipes, building a new Great chest, and replacing the keyboards;

• Rescuing Hendrickson Opus 53 (two manuals, 27 ranks) that was housed in St. Peter Catholic Church, which was destroyed by the same tornado. This mechanical-action organ was later used as part of the much larger instrument (Opus 99, three manuals, 40 ranks) designed by Andreas Hendrickson for the new church;

• Rebuilding and moving a much-altered 1931 Aeolian-Skinner (Opus 877) to a church in Arkansas in 1990 (Opus 88, three manuals, 30 ranks), then, after that church had closed, moving the instrument and reinstalling it at Celebration Lutheran Church in Sartell, Minnesota, in 2009 (Opus 115, three manuals, 35 ranks).

Hendrickson as author

From his beginnings in academe, Hendrickson never lost his inquisitive mind or his desire to share what he had learned. An active member of the Associated Pipe Organ Builders of America (APOBA) and the American Institute of Organbuilders, he served as president of APOBA for about 8 years. During that time, he arranged for the organization to commence sponsoring Pipedreams on American Public Media and oversaw the statement APOBA produced regarding “sampled voices” in pipe organs.

A large undertaking by Hendrickson was a long series of articles he wrote, mainly for The American Organist. These included articles on families of tone, divisions of the organ, tonal architecture, pipe materials, and a host of other relevant topics. The Hendrickson Organ Company website lists and links to 46 of these articles written between 1976 and 2003. [http://www.enchamade.com/hendricksonorgan/wb/pages/articles.php]

More recently, Hendrickson returned to his physics roots by collaborating on a research project with Dr. Tom Huber and some of his students at Gustavus Adolphus College. A summary of their study, “Vibrational Modes of an Organ Reed Pipe,” can be accessed at http://physics.gac.edu/~Huber/organs/vibrometer/ and an abstract of Huber’s Faculty Shop Talk about the project can be found at https://gustavus.edu/events/shoptalks/Shop0304.htm.

The future

Charles Hendrickson has retired from active involvement in the work of the Hendrickson Organ Company. The enterprise continues under the leadership of his two sons, Andreas and Eric. Andreas, who holds an architecture degree from the University of Minnesota, is in charge of design, while his older brother, Eric, is head of installations, tuning, and service. Andreas also called on his architecture background to design the rebuilding of the portion of the shop lost to the November 2013 fire. The company services many of their own instruments, plus numerous other instruments around Minnesota and neighboring states. The brothers grew up in the organ factory and learned many of their skills from their father. Thus a new generation is continuing the process of building, rebuilding, and repairing pipe organs in this small town in southern Minnesota. ν

References

Bies, Jessica. “PORTRAITS: Sons of St. Peter pipe organ maker continue Hendrickson legacy,” St. Peter Herald, March 27, 2014. www.southernminn.com/st_peter_herald/news/article_bb355bf8-3aea-55a2-b9…

Hendrickson Organ Company website: http://hendricksonorgan.com

Huber, Tom, Brian Collins, Charles Hendrickson, and Mario Pineda. “Vibrational Modes of an Organ Reed Pipe.” Presentation for Acoustical Society of America Meeting, November 2003. http://physics.gustavus.edu/~huber/organs/

Interviews with Charles Hendrickson in June and July, 2016, plus several phone conversations.

Organ Historical Society Pipe Organ Database: database.organsociety.org

TCAGO Pipe Organ List: http://www.pipeorganlist.com/OrganList/index.html

Vance, Daniel. “Hendrickson Organ Company.” Connect Business Magazine, July 1999, Mankato, Minnesota. http://connectbiz.com/1999/07/hendrickson-organ-company/

Andover Organ Company, 

Lawrence, Massachusetts

Opus R-345, Christ Episcopal Church, Charlottesville, Virginia

From the builder

In projects, journeys, and lives, there are milestone events that mark progress or achievements. The dedication of Andover Opus R-345 at Christ Episcopal Church in Charlottesville, Virginia, was such an event. It was a milestone for three long journeys: the completion of a seven-year project for Andover; the culmination of a decade-long sanctuary renovation process for Christ Church; and the latest chapter in the 143-year odyssey of a resilient New England organ.

With their simplicity and durability, it is not unusual for well-made old tracker organs to outlast the buildings or congregations for which they were originally made. Happily, they can often be relocated and repurposed to fit the musical needs and budget of a new owner. At Andover, we tune and maintain a large number of 19th-century instruments which are now in their second, third, or fourth homes.

The saga of the Christ Church organ certainly illustrates this! The core of the instrument is a three-manual, 29-stop organ built in 1869 by E. & G. G. Hook of Boston as their Opus 472 and originally installed in Grace Episcopal Church in Chicago, Illinois. In 1902, it was moved to another Grace Episcopal Church, in Oak Park, Illinois. In 1922, it was sold to the Third Congregational Church of Oak Park, where it was rebuilt and electrified by Nicholas Doerr of Chicago. The organ was next moved to St. Ludmilla’s Catholic Church in Chicago, probably in 1937 when the Third Congregational Church merged with another congregation. When St. Ludmilla’s closed in 1991, the organ was put into storage. Andover’s Robert C. Newton, a nationally recognized authority on Hook organs, learned of the organ’s availability and purchased it. Opus 472 then made the long journey back to Massachusetts, where it sat in storage, awaiting its fifth home.

Meanwhile, Christ Church in Charlottesville, Virginia, had formed an organ committee to find a replacement for their failing 50-year-old electro-pneumatic organ. That organ had been cobbled together from a variety of used and new parts, and the builder had gone out of business before the organ was finished. Concurrently, plans were begun for a complete renovation of the sanctuary. After much study, the committee determined that the best location for the new instrument would be at the front of the church, to speak directly towards the congregation. This was confirmed by each builder that the committee interviewed during the selection process. 

Being responsible stewards of the church’s resources, the organ committee also researched the option of installing a rebuilt used organ. They determined that if the original organ was a well-made, quality instrument, the end result could be equal, or in some cases superior, to a new organ—yet at significantly less cost. John Whiteside, who became Christ Church’s music director in 2005, contacted us and learned of E. & G. G. Hook Opus 472. Built in 1869, the organ dated from the “golden period” (1850s–1870s) of the firm’s instruments. 

Because the organ had lost its original case, console, structure, action, and wind system during its travels, the surviving Hook pipes and windchests could easily be rearranged to fit the available space in Christ Church. The most essential parts of any organ are the pipes, which define its tonal signature, and the windchests, which influence how the pipes speak and blend.

The Hook firm was one of 19th-century America’s premier organ builders. Their instruments, highly regarded for their mechanical and tonal excellence, were designed and voiced to work well in the dry acoustics of American churches. Though we at Andover build modern instruments designed to serve the needs of today’s church musicians, we draw insight and inspiration from the surviving work of the brothers Elias (1805–1881) and George Greenleaf (1807–1880) Hook and their successor, Francis Hastings (1836–1916). We have been privileged to work on many of their important surviving instruments, including their monumental 101-rank 1875 masterpiece, Opus 801, at the Cathedral of the Holy Cross in Boston, and the famous 1876 “Centennial Exposition” organ, Opus 828, now in St. Joseph Cathedral in Buffalo.

After careful deliberation, the committee recommended that Christ Church purchase and install Hook Opus 472—which would be completely renovated, rebuilt, and enlarged by Andover—at the front of the church surrounding the rose window. This proposal was approved by the church’s vestry, and in April 2005 a contract was signed. 

The rebuilding work started in 2007, with Ben Mague as project team leader. The Hook pipes were restored and the windchests rebuilt and enlarged to accommodate additional stops. New and vintage ranks, scaled and voiced to be compatible with the original Hook stops, were added to augment the organ’s tonal palette. Ben Mague and Michael Eaton engineered a new console, structure, action, and wind system to fit the renovated chancel area. The new casework was designed by Donald Olson. Noted church architect Terry Eason prepared the plans for the sanctuary renovation.

The organ is laid out with the Swell on the left, the unenclosed Choir in the center, and the Great on the right. The Pedal stops are divided among these three locations. The bass of the Pedal reed is behind the Swell, its treble and all of the 16′ Subbass are behind the Choir, and the Double Open Diapasons are behind the Great. 

The organ’s white oak casework was built in our shop. We take great care to design the exterior of each instrument to complement the architecture of its surroundings. Thus, the blind Byzantine arches of the lower casework were patterned after the existing chancel side wall woodwork. The polished tin façade pipes comprise the lowest notes of the Great 8′ Open Diapason and the Pedal 8′ Violoncello. The detached oak console has walnut interior woodwork and a walnut swirl veneered music rack. The pau ferro drawknobs, with 19th-century-style oblique heads with inset engraved labels, are arranged in stepped terraces. The center-pivoted manual keys have bone-plated naturals and ebony sharps.

The manual key action is mechnical, as are all the couplers. To facilitate the positioning of the Pedal pipes in the most advantageous spaces, all of the Pedal stops are on electro-pneumatic unit chests that we designed and built. The stop action is electric. The Solid State Organ Systems combination action, with 100 memory levels and a piston sequencer, affords the player seamless control of the organ’s resources. 

While the rebuilding was underway, Christ Church’s rector departed for another parish. The church postponed the fund-raising for the sanctuary renovations and turned its attention to finding a new rector. Thankfully, during this period a parish donor continued to fund the organ’s rebuilding so the project would not lose momentum. 

The completed instrument was unveiled at an open house at our shop on November 6, 2010. Although the organ was ready, the church was not. Bids had not yet been received for the chancel renovations. It was discovered that part of a rock ledge beneath the chancel would have to be removed to permit excavation for a basement to house HVAC equipment and the organ blower. This increased the scope of the project.

The organ sat, playable, in our shop until May 2011 when, needing that space for other projects, we shipped it to Charlottesville and stored it in the church parish hall. The chancel renovations were finally begun in the fall of that year and nearly finished when we started the organ’s installation in January 2012. Parts of the organ were playable by Easter, when it was first used. The remaining flues and all the reeds were installed and regulated during the following months. On Friday evening, October 5, 2012, noted organ recitalist and recording artist Bruce Stevens played the dedicatory program to a large and excited congregation. It was a milestone event, the happy ending to a long road!

Just as a great organ is the sum of its parts, a great organ company is the sum of its people. We are blessed to have a team of seventeen dedicated craftspeople who, collectively, have over 400 years of organbuilding experience. Those who worked on Opus R-345 were Ryan Bartosiewicz, Matthew Bellocchio, Anne Doré, Michael Eaton, Don Glover, Al Hosman, Lisa Lucius, Benjamin Mague, David Michaud, Tony Miscio, Fay Morlock, John Morlock, Robert Newton, Donald Olson, Casey Robertson, Jonathan Ross, Craig Seaman, and David Zarges.

—Matthew M. Bellocchio

Andover Organ Company

Photos © William T. Van Pelt

Testimonials

It really is a wonderful organ! I’m playing everything from Franck to Rheinberger to Bach . . . and all of these different-style pieces sound really very fine. I find the key action quite graceful to play. Because so many of the sounds are the golden-period Hook sounds we love, we’re thrilled to have such an organ in Virginia—at long last. Thanks for all that you have done to provide this special, magnificent instrument to a location in our state. The only big disappointment is that it’s not here in Richmond!

—Bruce Stevens

University of Richmond

Thanks for the good work . . . and for giving Virginia an E. & G. G. Hook organ. I believe it is the only organ in the state to have most of its tonal components arising from the brothers Hook during their control of the company.

—William T. Van Pelt

Retired Executive Director 

Organ Historical Society

Russell & Co. Organ Builders,
Chester, Vermont
First Presbyterian Church, Ithaca, New York

From the builder
The term magnum opus is often used in the organbuilding trade to denote the apotheosis of an organbuilder’s career. It is an impressive expression, and the organs that receive such an accolade are usually equally impressive. It is interesting to note, however, that the distinction of magnum opus can be an ephemeral one. What a builder thinks of as his ‘biggest and best’ may be eclipsed just a few years later with an opus magnum novum. In any event, at the outset of a project an organbuilder has termed his magnum opus, he inevitably approaches the creation of the instrument with great reverence and dedication. When we received the contract to build our opus 47 for First Presbyterian Church in Ithaca, New York, we knew this would be our magnum opus and, regardless of whether a grander organ would leave our shop in years to come, took on the project in this way, making no little plans to design and build a pipe organ worthy of this special moniker.
First Presbyterian is a grand Romanesque stone structure built in 1894 and located in the heart of downtown Ithaca. The sanctuary seats 500 under a high barrel vault, coffered and richly ornamented with plaster florets. The church enjoys a large, vibrant congregation and an equally active music program, including a sizable adult choir, children’s choir, and handbell choir. In conjunction with the organ project, the sanctuary was renovated to remedy the less-than-desirable acoustics. Previously, the entire floor of the room was carpeted, and the pews were cushioned in heavy velvet. A completely new ceramic tile floor, new and less-absorbent seat cushions, hardened wall surfaces, and a new rear wall designed to reflect sound randomly all contribute to a lively and supportive acoustic, approaching three seconds of reverberation.
The preceding instrument began its life in 1901 as Austin’s opus 39—a three-manual instrument of 47 ranks, including a five-rank Echo organ added in 1930. The organ was installed in the front of the church behind a handsome white oak case crowned with a magnificent central tower rising nearly the full height of the sanctuary. Designed in traditional early 20th-century style, the organ contained the typical myriad of foundation stops, with sparse trimmings of upperwork, undergirded by an ample and satisfying pedal department. Sixty-five years later, Austin was called to rebuild the organ in keeping with the tonal thinking of the day. The result was completely new pipework typical of late 1960s construction and voicing; the Echo organ, thanks to the organist, Dorothy Arnold, was retained and unchanged. With many manual stops sharing common basses, and the pedal division largely borrowed from the manuals, there was little foundation tone. The scaling of the new pipework exacerbated this condition, with halving ratios that resulted in a thin bass and a treble ascendancy unwelcome in so dry a room. The impressive 16¢ and 8¢ 1901 façade was completely replaced by much narrower-scaled pipes with English bay mouths, leaving large, odd-looking gaps between the pipes.
By the 1990s, the organ proved to be inadequate for the many demands the church’s music program placed upon it. Mounting mechanical problems toward the end of the decade that rendered the instrument increasingly unreliable led the church’s organist, George Damp, and the director of music, Larry Doebler, to realize that a completely new instrument was needed to correct the tonal inadequacies of the existing instrument and to fill the needs of the extensive music program. The church named John Schwandt as consultant on the project. Dr. Schwandt recommended requesting proposals from lesser-known builders of high quality. After a national search, Russell & Co. of Chester, Vermont was selected in late 2002 to build the new organ.
A profusion of new romantic organs in recent years, as well as a renewed reverence and interest in the work of early 20th-century American builders, specifically Skinner, was the milieu for the design and construction of this instrument. While Russell & Co. have built several large instruments along French romantic lines, an American romantic/ symphonic organ presented a new challenge: how to take all the lessons learned from our previous instruments, combine them with a century of progress in American organbuilding, and produce an organ capable of accompanying congregational song, playing choral and orchestral literature, and still be able to play the solo organ repertoire, all the while staying true to a ‘symphonic’ ideal.
This challenge was met valiantly with an effective partnership between our firm and George Damp. Having spent all his professional life as an organist, teacher, and church musician, George brought years of experience and a clear idea of what he wanted to the drawing board—a grand, large-scale organ that would make Ernest Skinner proud, but would also not disappoint the likes of G. Donald Harrison. While orchestral voices and ensembles were of great importance, so too was the presence of well-developed and blended choruses in each division.
Our initial proposal was for a three-manual organ with a separately enclosed Solo and Choir sharing one manual. However, during our early discussions with the church music staff, it became clear that to fill all the demands placed upon it, a significantly larger, four-manual instrument would be better suited and would eliminate several reluctant compromises in the original design. Having completed the rebuild of a four-manual Æolian-Skinner, opus 1433, for First Unitarian Church in Worcester, Massachusetts, and the building of a new, large three-manual French romantic organ for the Cathedral of St. Paul, also in Worcester, we felt ready to tackle our first new four-manual organ. During the selection process, George visited Worcester’s First Baptist Church, home to a rebuilt Reuter for which we constructed a new, large four-manual Skinner-style console. Skinner consoles have long been renowned for their visual elegance, impeccable craftsmanship, and intuitive and comfortable ergonomics. It was agreed First Presbyterian should possess such a console to complement the new organ.
First Presbyterian has long been host to performances of choral and chamber music by numerous local ensembles, and the acoustical renovation that preceded the organ installation only made the space more attractive for outside groups’ use. Knowing this, we included in the initial proposal a small division designed for use as a continuo organ at chancel level. George was hesitant at first—it seemed like a water and oil situation to have such a division included in a grand romantic organ. However, with a large, higher-pressure instrument as the main organ, George and Larry Doebler agreed that it would be futile to attempt to use it in continuo playing, and not only agreed to the division’s inclusion, but encouraged its enlargement. What started out as a small five-stop division grew into a full-fledged low-pressure Positiv, complete with a Sesquialtera and a very gently voiced four-rank Scharff. Its elegant case makes use of the crown and columns of the large throne chair that used to sit in the middle of the chancel, blending the case with the rest of the chancel decoration.
While spacious, the two front organ chambers had previously housed 47 ranks of pipes, including a very small pedal division. One of the project’s greatest challenges was to make 79 ranks of pipes fit in these same chambers—including a large-scale independent pedal division with three 32' stops—while maintaining easy access to each pipe and mechanism. After much experimenting in the forgiving world of computer-aided design, a layout that achieved both of these goals was reached. Aside from the Antiphonal and Positiv, the entire instrument is installed behind the organ case, with the Great, Solo and Choir divisions to the congregation’s left, and the Swell and Pedal on the right. There is no ceiling over these chambers, allowing for a great deal of sound to ascend into the barrel vault over the chancel, creating a wonderful blending chamber of sorts, which then projects the sound well into the room. Even from the center of the chancel, it is difficult to tell from which side sounds are coming.
The Antiphonal organ is located high up in the right rear corner of the sanctuary. The Antiphonal Swell division, consisting of the original Echo organ with two additions, is housed in the former Echo organ chamber. The two stops of the Antiphonal Great sit on a newly constructed ledge in front of the chamber, with the pipes from the 8' Prestant forming a simple and elegant façade.
The console constructed for opus 47 models the console at First Baptist in Worcester. Built of quarter-sawn red oak and walnut with a hand-rubbed oil and stain finish, it complements the elegance of the renovated sanctuary and restored organ case. With manual keys of 10th-cut ivory and ebony, and pedals of maple and ebony, the console immediately has a luxurious tactile feel. Through many consultations with George as well as with the organists working in our own shop, the selection and layout of controls were designed to be as intuitive to the player as possible. The stopjamb layout takes its cue from the tall consoles of English cathedrals; this provides the vertical space to lay out the complete choruses of each division in one line, making drawing every plenum quick and straightforward. Though a complete list of playing aids and mechanicals accompanies the specification, several are worth noting here. With the choral accompanist in mind, the Swell is provided with ten divisional pistons, and pedal-to-manual combination couplers with discrete memories are available on each division. A 99-level combination action is included with 16 general pistons and a sequencer; additionally, each piston can be easily modified as to which stops it affects, releasing the player from the distinction and restraints of divisional and general pistons. Divisional cancels are also provided by pushing the division nameplate on the stopjamb.
The key and stop action throughout the instrument is electro-pneumatic, a departure from our usual practice of employing slider and pallet chests. The chests are modeled on late 1960s Aeolian-Skinner pitman chests, with several of our own modifications. Even the Positiv, speaking on 23⁄4" pressure, plays on a pitman chest and works beautifully, resulting in quick and desirable pipe speech, ideal for its anticipated continuo use.
A design goal from the outset of the project was to make the organ large enough to have four complete manual divisions (seven, including the Positiv and Antiphonal Great and Swell), but to keep costs manageable, all the while not sacrificing quality. To this end, we looked to the existing Austin pipework, all having been new (with the exception of the Echo) in 1969, to see what might be reused in the new organ. While hard to believe this neo-baroque pipework could blend its way into an American romantic organ, we found much of the pipework was well constructed and cut up low enough to permit its successful rescaling and revoicing in a very different style.
Of the 40 completely new ranks of pipes added to the organ, all new choruses and flutes are constructed of 94% lead alloy, a practice we have long employed, allowing our voicers to achieve a degree of tonal superiority unattainable with the use of lighter, higher tin content alloys. In general, this allows the 8¢ line to be weighty and warm, progressing through a velvety chorus to light and silvery upperwork—all mixtures in the organ are also of the same high-lead content. The epitome of this construction and voicing style is the 8¢ Montre on the Great, a 42-scale Diapason more English than French, despite its name. Being placed outside the Great expression box, the Montre’s tone is commanding, warm and strong, and is paired with the enclosed 44-scale 8' Principal for lighter choruses. True to the design objective, choruses through at least 4¢ were provided in the three main manual divisions (Great, Swell, Choir), resulting in three very independent divisions that terrace and blend successfully for the performance of French literature. With the old Great 8' Principal revoiced as the Swell Diapason, and the 45-scale English Diapason in the Choir of special variable scale, the five combined 8' Diapasons create a rich, singing tone that serves as a lush solo color, as well as the basis for the aforementioned well-blended choruses.
One of the hallmarks of an American symphonic organ is the abundance of orchestral reeds, so carefully developed by the likes of Skinner a century ago. Fittingly, opus 47 has a delicious array of imitative stops spread out amid the manual divisions. The demand for these stops allowed us to use several ranks we had been storing in our stockroom for many years while the popular organ style called for very different reed stops. In the Choir division, the Clarinet finds its traditional home, and comes to Ithaca as a restored Johnson Bell Clarinet. In our study of early 20th-century American organs, a common finding was that the Choir division, while potentially having enough foundation tone, nearly always lacked the trumpet-class reed timbre to assert itself against the Swell organ. In this light, the second Choir reed deserves special note as an unusual stop, even in this age of rediscovered orchestral sounds. The 8' Waldhorn uses restored Aeolian pipes from the Higgins estate in Worcester, Massachusetts. This medium-scaled, capped trumpet is not quite a French Horn, and not quite a Trumpet, but something in between. It has a chameleon-like quality in that it is a beautiful and haunting solo voice, but when drawn with the full Choir, it acts as a chorus reed, giving the Choir a definite presence amidst full organ.
Two new reeds, the English Horn in the Solo, and the Orchestral Oboe in the Antiphonal Swell, were beautifully voiced by Chris Broome, turning out exactly as we had wanted them, and possessing striking imitative qualities.
For climactic moments in both repertoire and accompaniments, two solo chorus reeds are provided in the Solo division. The enclosed Tuba Mirabilis has harmonic resonators from tenor F# and is voiced on 15" pressure, providing the traditional dark, smooth and powerful tone suggested by its name. The 8' Silver Trumpet, played on 10" pressure, serves to contrast with the Tuba for a different effect. Envisioned in the same manner as the Solo Trumpet Harmonique at Yale’s Woolsey Hall, the pipes are constructed with French shallots and placed outside the Solo enclosure, yielding a brighter and brassier tone. While neither stop is oppressively loud, when combined they yield a tone of refined power that can top full organ with single notes.
Another criterion from early on in the project was to have a profusion of string stops of varying power and brightness to enable a truly orchestral string crescendo from pp to ff. While there are the usual strings sprinkled throughout the Choir and Swell, the Solo strings truly cap the string chorus, possessing incredible intensity and brilliance. Although the Solo was originally designed with one pair, the discovery of two ranks of Skinner orchestral strings in our stockroom led to the addition of a second set to be the pinnacle of the string chorus. Voicer Ted Gilbert worked wonders with these two pairs—the Gamba is the quieter of the two, possessing an almost woody quality, whereas the Cello represents the extreme limit of bright, powerful, shimmering string voicing. Twelve ranks of string or undulating tone in the organ, from the Swell Flauto Dolce through the Solo Cello, provide a seamless powerful crescendo, made even more effective with the use of double expression in the Solo.
No symphonic organ is complete without an expression system that can fully restrain the power of the instrument and instantly change the dynamic of the stops drawn. To this end, no fewer than six Skinner-replica whiffletree expression motors are used in this organ. While the Swell, Choir, and Antiphonal Swell are enclosed and expressive as expected, the Solo and Great warrant description of their expressive capabilities. From the outset, we had designed the Great to be partially enclosed, mainly the reeds and upperwork. Additionally, the Solo was to speak through its own shades into the Great box, providing the division with the aforementioned double expression.
The Great organ’s expressive capabilities were expanded early on with the decision to enclose the entire division with the exception of the 8' Montre and 16' Principal. Through careful scaling and voicing, the division doesn’t suffer its enclosure with the shades open, and contains the tonal resources necessary to lead enthusiastic congregational singing with all 500 seats filled, as well as serving its traditional role in the performance of organ literature. However, with the added benefit of 16-stage expression, these same tonal resources can be manipulated to match any congregation size, as well as provide another enclosed division of power for choral accompaniment.
At the same time, to give the Solo and Great more independence from each other, we added a second set of shades to the Solo, allowing the division to speak directly into the chancel. This provides the Solo division with a third expressive option. As installed, the Solo swell box is behind the Great box and four feet higher. The primary Solo shades open into the Great, with the Solo chancel shades being at the very top of the Solo box, four feet high, and opening directly into the room. While giving an acceptable dynamic range, these smaller shades provide an enormous timbral range, noticed especially with the strings. With the full Solo string chorus playing and the main Solo shades open, the full weight of the 8' stops comes through—one can almost hear bows drawn across the strings. However, when the upper shades open, the full range of upper harmonics from these stops erupts from the box, filling out the sound just when you thought it couldn’t be any brighter and more sonorous.
The control of all these expression options is met with four swell shoes, including the crescendo shoe. The Solo shoe normally controls the chancel shades. However, when the “Solo Double Expression” drawknob is drawn, the Solo shoe operates both sets of Solo shades, as well as the Great shades, in a set sequence to give the maximum crescendo possible. Additionally, a second drawknob closes the Solo chancel shades should that be desired, and sets the Solo shoe to control only the main Solo shades. The Great and Antiphonal Swell expression functions are independently assignable to any shoe, including crescendo. When not assigned, the shades default to a position settable by the organist. Harris Precision Products retrofitted two of their standard drawknob units with potentiometers to set these defaults, and thus these controls are seamlessly integrated into the console via rotating drawknobs. All Swells to Swell is provided to afford simple control over the entire dynamic range of the organ, and indicators are provided below the coupler rail to show the position of each set of shades.
The use of such sophisticated expression functions allows the organist to present the full dynamic range of the orchestra, and the use of the smaller Solo chancel shades allows for the ultimate in dynamic and timbral expression, a feature unique to this organ, and one we hope to further develop and use in subsequent installations.
To complement the varied and colorful manual divisions, a large, independent Pedal division affords the appropriate bass sonority for whatever registration is drawn on the manuals. Consisting of eleven independent ranks and 29 stops, the Pedal organ is augmented by judicious borrowing from the manuals. Four 32' stops are provided to underpin the instrument and provide a true feeling of gravitas. From the initial planning phases of the project, it was made clear that no digital voices were to be used in the organ; thus, all 32' stops play real pipes, or are derived. The Bourdon, of generous scale, is voiced gently for use with the softest registrations, but with enough quint in its tone to be made stronger as more pedal stops are added. The 32' Principal, an extension of the 16¢, uses Haskell pipes to GGGG#, the rest of the 32' octave being a resultant. The full-length 32' Contra Posaune, also masterfully voiced by Chris Broome, gives plenty of weight and power to full organ, but without being brash or rattling. For a ‘second’ 32' reed, the Harmonics is a 102⁄3' cornet, derived from the Great 16' Double Trumpet and 16' Gemshorn, giving the semblance of 32' reed tone underneath smaller tutti registrations.
With the added features of sophisticated expression, as well as the inclusion of more fully developed choruses, First Presbyterian’s instrument represents a logical and successful extension and merging of the two dominant styles of 20th-century American organbuilding: the symphonic and American classic schools. The instrument serves as a platform for the successful performance of a wide body of organ literature, as well as fulfilling its accompanimental roles. In its design, construction, voicing and tonal finishing, we feel truly proud to call this instrument our magnum opus, regardless of what instruments leave our shop in years to come, and thank First Presbyterian for the opportunity to set our sights high and build an organ we have so long dreamed of creating. We therefore commend this instrument to the glory of God and the people of First Presbyterian Church as a product of our finest craftsmanship. May it long bring joy and inspiration to those who hear and play it, just as it has inspired us as organbuilders in its creation.
Those working on the project included: Stephen Russell, David Gordon, Gail Grandmont, Carole Russell, Theodore Gilbert, Jonathan Ortloff, Larry Chace, Frank Thompson, Matthew Russell, Peter Walker, Allan Taylor, Eric Johansson, and Andrew Lawrence.
—Jonathan Ortloff

From the organist
Now in my fifth decade of deep affection for the pipe organ, its music, and its role in worship, I am brought to this point of extraordinary magnificence in the creation of the opus 47 Russell & Co. organ. During these five decades, I have witnessed many trends and fads in organbuilding. The commitment of this church to the pipe organ as its primary medium for the leading of congregational song is all the more inspiring to me.
This instrument transcends the fads of recent decades. The organ/sanctuary committee, formed by this church in the fall of 2000 and guided by our organ consultant, John Schwandt, selected several organbuilders to consider for the project. This committee authorized my colleague Larry Doebler and me to travel far and wide to experience the work of the builders we had selected as finalists, each of whom subsequently visited the church to inspect the sanctuary space and existing organ. In the end, we all had no doubt that Russell & Co. was the appropriate choice for us.
While we were confident that our new organ would be very fine indeed, we could not have anticipated the level of magnificence that has been achieved here by Stephen Russell and his colleagues. In my 50 years of playing pipe organs, I have never been privileged to play an organ so elegant, expressive and versatile as this one. The word synergy is one that I have never before been comfortable using. This powerful word, meaning “combined or cooperative action or force,” is the perfect term to describe the wondrous emergence and continuing presence of this organ. Beginning with the collective sharing of the original committee, the guidance of Anita Cummings, pastor of this church at the outset of the project, the beneficence of Mrs. Dorothy Park, church member and donor of funds for this organ, the courage and vision of church members to undertake and fund the acoustical transformation of the sanctuary from sonically “dead” to vibrant and moderately reverberant, and the mutual respect and creative sharing of organbuilder, consultant and resident organist, have resulted in the ultimate synergy: the harmonious blending of thought, craft, sound and space that is far greater than the sum of its parts.
I offer gratitude and the highest of commendations to master organbuilder/voicer, Stephen Russell, his dedicated staff, and the many others who have had a hand in the three-year process of the emergence of opus 47!
—George Edward Damp

From the church
The history of our new Russell organ begins with the construction of our current sanctuary in 1894. In 1901, the Austin Company installed our first permanent organ (the oak façade that currently supports the visible organ pipes behind the choir is part of that original installation). In 1930, the Echo organ (above the southwest entrance to the sanctuary) was added. In 1969, Austin built a completely new organ in the chancel, one typical of that period—an instrument that, with its sheer power and rough voicing, overwhelmed our beautiful, but acoustically rather dead, sanctuary.
Problems with the Austin organ started to appear in the early 1990s. Minor problems continued to occur, and it was clear that something needed to be done. An organ/sanctuary committee was formed that, early in its existence, possessed the keen insight that the sanctuary itself was a part of the organ (the box that the organ’s voice is dispersed into), and that any renovations to the organ must be accomplished within the acoustical framework of the sanctuary.
As a result, the committee hired an organ consultant, John Schwandt, and an acoustical consultant, Scott Riedel, to guide them through the decision-making process of repairing our organ. Each made an initial, individual presentation to the committee, but most memorable was their joint participation in a lengthy “town meeting” with the committee and members of the congregation. The meeting ended with a focus for the project—to improve our worship experience by enhancing both music and the spoken word through renovations to both the organ and the sanctuary.
Early on in this process, then-pastor Anita Cummings and organist George Damp approached Mrs. Dorothy Park with the invitation to become a supporter of this exciting adventure for the church. After several subsequent discussions, Mrs. Park indicated that the church deserved the finest organ created by the finest builder, and that she would cover the cost of the organ if the congregation would pay for the acoustical renovations.
A clear consensus decided that Stephen Russell was the right person to build the new organ. At the same time, Schickel Architecture of Ithaca was selected to design the renovations to the sanctuary. Several significant changes to the sanctuary were implemented to improve the acoustical environment. Certainly the most outstanding component of the sanctuary renovations is the reconstruction of the rear wall of the sanctuary. Its subtle sunburst pattern surrounding a high circular window is both extremely pleasing to the eye as well as functional in randomly scattering sound.
Suffice it to say, every aspect of the organ, from its general layout to the voicing of each individual pipe (all 5,000 of them) was accomplished with the unique features of our sanctuary in mind. The outcome is truly a gift for the ages, something that First Presbyterian Church can share with Ithaca and the surrounding area for decades to come. One can only hope that the generosity of Mrs. Park and the efforts of those involved in this project will be more than repaid by the joy and exhilaration shared by all those who experience our wonderful new organ.
—Tom Owens,
Elder and member of session,
First Presbyterian Church

From the consultant
It is a privilege to offer a few words regarding Russell & Co. opus 47. In a world that so desperately hungers for and needs beauty, it is satisfying to have been a part of a long process that has ultimately yielded a thing of great beauty that will inspire the generations yet to come.
My primary involvement in this project occurred before contract-signing. It is my fervent belief that consultants should provide general education and thereby enable church committees to make an informed decision about what is best for their congregation’s worship and community life. However, before we could start to talk about organs, it was very important to have the bigger picture in perspective, namely the inferior acoustical properties of the room. The committee wisely considered the importance of good acoustics that benefit congregational prayer, singing, oratory, as well as but not limited to instrumental music. Scott Riedel provided acoustical consultation; the action taken on most of his recommendations yielded a vastly improved sacred space.
The pipe organ, while not the only possible instrument for worship, remains the best single instrument to lead corporate worship because of its ability to sustain tones from soft to loud and from every pitch level. A well-designed and constructed pipe organ should enable an organist to creatively and expressively accomplish this musical leadership, often interpreting music of many different styles. It was my recommendation that an organ of rich, warm tone and with ample variety of color from all pipe families (principal, flute, string, and reed) be considered. The great organbuilders of the past were not striving to build instruments after someone else’s style, but to create organs suited to the rooms in which they were installed and reflecting the cultural identity of their time and place. That Russell opus 47 resembles in some aspects organs of the early half of the 20th century is entirely irrelevant. The fact remains that it is not an E. M. Skinner organ, an Æolian-Skinner organ, a Kimball organ, or any other organ. Rather, I believe that this instrument transcends labeling of any kind. Opus 47 has richness of color, overall warmth, and clarity. In previous periods of organ building, rich fundamental tone and clarity were thought to be mutually exclusive attributes; one could not have both. The refined voicing and the mechanical perfection of the pitman windchest exemplify an organ that will allow for music of any style. Congratulations are due to the committee and congregation for investing in their future so well!
—John D. Schwandt

Russell & Co. Organ Builders, Opus 47
First Presbyterian Church, Ithaca, New York, May 2006

GREAT – II (Expressive)
16' Principal* 49 pipes, 1–12=Pedal
16' Gemshorn* 12
8' Montre* 61
8' Principal 61
8' Bourdon 61
8' Flûte Harmonique 49
8' Gemshorn 61
4' Octave 61
4' Rohrflöte 61
22⁄3' Nasard 61
2' Fifteenth 61
11⁄3' Fourniture IV–V 297
16' Double Trumpet 61
8' Trumpet 61
Chancel Great Off
MIDI on Great
*Unenclosed

SWELL – III (Expressive)
16' Lieblich Gedeckt 61
8' Diapason 61
8' Bourdon 61
8' Viola 61
8' Viola Celeste 61
8' Flauto Dolce 61
8' Flute Celeste 49
4' Octave 61
4' Nachthorn 61
2' Octave 61
2' Plein Jeu IV–V 296
16' Fagotto 61
8' French Trumpet 61
8' Oboe d’Amour 61
8' Vox Humana 61
4' Clarion 61
Tremulant
MIDI on Swell
Swell Sub
Chancel Swell Off
Swell Super

CHOIR – I (Expressive)
8' English Diapason 61
8' Hohlflöte 61
8' Quintadena 61
8' Erzahler 61
8' Erzahler Celeste 49
4' Octave 61
4' Koppelflöte 61
22⁄3' Nazard 61
2' Flute 61
13⁄5' Tierce 61
16' Corno di Bassetto 12
8' Waldhorn 61
8' Clarinet 61
Chimes Ant. Swell
Tremulant
Choir Sub
Choir Off
Choir Super
MIDI on Choir

POSITIV – I
8' Gedeckt 61
8' Spillflöete 61
4' Prestant 61
2' Principal 61
11⁄3' Quint 61
22⁄3' Sesquialtera II 122
1' Scharff III–IV 232
Tremulant
Zimbelstern
Positiv Off

SOLO – IV (Expressive)
16' Cello 12
8' Concert Flute 61
8' Cello 61
8' Cello Celeste 61
8' Gamba 61
8' Gamba Celeste 61
8' English Horn 61
8' Tuba Mirabilis 61
8' Silver Trumpet* 70, double trebles
Chimes Ant. Swell
Tremulant
Solo Sub
Solo Off
Solo Super
MIDI on Solo
*Unenclosed

ANTIPHONAL GREAT – II
8' Prestant 61
8' Stopped Flute 61
Antiphonal Great Off
Antiphonal Great Super

ANTIPHONAL SWELL – III
8' Gedeckt 61
8' Viole Aetheria 61
8' Vox Angelica 49
4' Flute d’Amour 61
8' Orchestral Oboe 61
8' Vox Humana 61
Chimes
Tremulant
Antiphonal Swell Sub
Antiphonal Swell Off
Antiphonal Swell Super

PEDAL
32' Principal (GGGG#) 4
32' Contra Bourdon 12
16' Open

Russell & Co. Organ Builders,
Chester, Vermont
First Presbyterian Church, Ithaca, New York

Paul Fritts & Co., Tacoma,
Washington
St. Philip Presbyterian Church, Houston, Texas

From the organist
Nearly a decade ago, St. Philip Presbyterian Church began planning a major renovation of its facilities. In addition to a new educational building, plans were made to gut the sanctuary and make it a more vibrant and flexible space. By 2004 a new organ was on the horizon as well, thanks to an old electric-action instrument whose shortcomings had become obvious, an enthusiastic committee, and an expert consultant. In 2005 we bid good-bye to the old sanctuary and organ and signed a letter of intent with Paul Fritts for his Opus 29, a three-manual and pedal mechanical-action instrument of 48 stops, which was delivered and installed in the renovated sanctuary in early 2010.
And we couldn’t be happier! The new organ and sanctuary are a perfect match, with the instrument speaking directly into the room from its lofty position in a new gallery. Significant changes had to be made to the former choir loft to support the new organ, with the new gallery extending forward into the sanctuary to accommodate both choir and organ. Fortunately, we were blessed with a building whose basic shape—tall, long, and slender—presented a potentially ideal acoustical environment for organ and choral music. The transformation has been stark: a room that formerly had abundant absorptive and soft surfaces now has several seconds of reverberation. It’s also become a much more appealing visual space: the modernist light-filled sanctuary now boasts handsome millwork, beautiful stained glass, a tile mosaic front wall, and in the rear gallery, a stunning new organ.
Our selection of Paul Fritts & Co. as builders reflects St. Philip’s longstanding commitment to excellence in its music program and the amazing foresight and generosity of its members. Now just a little over a year old, the Fritts organ has generated a great deal of local and even international enthusiasm, and we’re delighted to be sharing it with a wide community of music lovers. I’m especially pleased that organ students from the University of Houston are able to use Fritts Opus 29 for weekly practice and degree recitals, since a splendid instrument like this has so much to teach us.
—Matthew Dirst
Organist
St. Philip Presbyterian Church

From the organ consultant
Long before I became the consultant for a new organ at St. Philip Presbyterian Church in 2004, Matthew Dirst set the groundwork for the project. For many years he had developed a solid relationship of trust, goodwill, and mutual respect between himself and the musicians, clergy, and congregants of St. Philip. It is certainly safe to say that without that special relationship, this project would never have happened. Soon before I came on board, an organ committee had been formed and fundraising had begun. I quickly learned that music was very important to the people of St. Philip. The committee made clear that they wanted an instrument that could lead in worship, accompany the choir, and make possible the performance of great organ music—especially music played by their world-famous organist! But something else came through from our initial meetings. The committee wanted an instrument of high quality that would stand the test of time, and of real beauty that would lead people to a fuller spiritual life.
The committee considered several builders. Committee members took their responsibilities seriously, and some of them made trips well outside the state of Texas to hear recent installations. As soon as they heard the Fritts organ at the University of Notre Dame, they knew what builder they wanted for St. Philip. The size of organ was never the driving force, and in fact the church initially contracted for a smaller (and less expensive) two-manual instrument. I know Matthew Dirst would have been content with it. But additional funds became available, and the size and scope of the instrument increased accordingly.
Besides the desire for a quality instrument that could lead in worship and be featured in concerts, the people of St. Philip Church wanted an instrument that could be used for educational purposes. The organ majors of the University of Houston now practice on this instrument almost every day, take weekly lessons at the church, and present degree recitals on it every semester. Last year, the church began an internship program, which lends support to one lucky UH graduate student in organ. In its role as music educator, the instrument will be featured in numerous conferences and workshops in the years to come, including a national conference sponsored by the Westfield Center for Early Keyboard Studies to be held April 12–15, 2012, and the AGO national convention, scheduled for the summer of 2016. We are most grateful!
My congratulations go first to Matthew Dirst, Associate Professor of Musicology at the University of Houston and organist of St. Philip Church, for his many years of strong leadership and impeccable musicianship. He really deserves such an instrument! I also want to thank the St. Philip Organ Committee—especially its remarkable chairperson, Elizabeth Duerr—for years of hard work and unwavering commitment to excellence. And, finally, thanks go to Paul Fritts and his entire team for the construction and installation of an instrument of real quality—one that I know will inspire the congregants of St. Philip and the citizens of Houston for many years to come.
—Robert Bates
Professor of Organ
University of Houston
Organ Consultant
St. Philip Presbyterian Church

From the organbuilder
Many decisions contribute to the building of an organ, and these decisions become more significant when virtually every part is designed and built in the builder’s workshop. This distinction, achieved by our firm in 1984 when the pipe shop was established, enables creativity to flourish—we can build anything we want.
Organbuilders have been practicing their art for centuries, often with extravagant support. Today we can visit existing organs from most periods and national styles and still experience them firsthand. These visits become more challenging since we must also account for things outside the original builder’s intention. We are experiencing instruments through the veil of rebuilds and restorations over the centuries, some not so sensitive. We must also develop a good understanding of the acoustical environment these organs are speaking in, often a far cry from the typical modern American space. We can both experience how these organs sound and behave today, and also imagine how they once were.
Over the course of many study trips, I have noticed things common to instruments I consider magical. Interestingly, these outstanding instruments are not limited to any national style or time period. When comparing the experiences, I find a substantial convergence in areas of sound. The sounds of the pipes are complex and yet they have an unusual combination of qualities often difficult to achieve but deliberately sought after: their harmonic content is both refined and colorful, and it is balanced with a generous amount of fundamental. The speech is quick and elegant. These qualities are especially challenging, since customary ways of refining speech generally kill the unique harmonic content we hear in the old pipes. Interestingly, we find these sonic qualities in other fine instruments: violins, harpsichords, pianos, and many others. There seems to be a connection to the human voice—richness is present, combined with clarity—and all of this is accomplished, in the case of the organs, without excessive intensity, through the use of relatively low wind pressure. The organs somehow function on a human scale in spite of being grand both in appearance and sound. The pipes have open feet and flueways and relatively high cutups, but are mostly controlled in their sound production by the organ’s wind pressure, the main determinant of the organ’s overall intensity. These things contribute to what has been aptly called a relaxed intensity—the pipes sing robustly without shouting. Many other aspects fall into place when stops are working this way. The blend between them is enhanced and many more stop combinations work together. The organs carry a space remarkably well without having to be loud. They lead rather than direct a congregation. This rather strict approach surprisingly enables an organ to be more eclectic or universal in its capabilities. And, most importantly, they are supremely musical.
These thoughts were on our minds as we considered the design and construction of the new St. Philip Presbyterian Church organ. Many ideas garnered from the study trips expand the design, construction, and voicing, along with the collective experience of our seven craftsmen. The case appearance, in keeping with the spare nature of the church architecture, is an original design and incorporates ideas found in revered cases to make it more interesting. The treble flats curve inward and alternate direction in ancient Dutch fashion, and the proportions of the bass and tenor flats follow well-established trends. Straightforward moldings properly adorn the case and each vertical stile is framed with decorative insets. The carvings are contemporary creations inspired by Renaissance-era Italian organ pipe shades. All is painted a glossy white with gold leaf highlights. The result in the church is both a striking appearance and a comfortable feeling that it belongs.
Tonally the organ is more strict and at its core Germanic. Arp Schnitger’s work forms the basis of our recipe, and for good reason. The level of sophistication in the pipe-making and voicing is a true inspiration. Congregational support is of paramount importance and was at the forefront of our thinking when envisioning the St. Philip tonal design.
There is an abundance of reed stops, and these pipes follow the same principles as the flue pipes. They are made to produce a strong fundamental tone combined with color and refinement. The resonators are cut long to facilitate this, and a welcome consequence is tuning stability.
Eclecticism within this structure can flourish. For the St. Philip instrument we have included many stops and features that broaden the scope. A Swell is present with shades on three sides, along with the required string stops plus the Hautbois (a strict Cavaillé-Coll copy) stop. A string stop is also present on the Great, and there is a wide variety of flutes throughout the organ.
We have also added an electric stop action piggybacked to the mechanical stop action. We do this since there is a vastly different life span between the two systems. Any electric computer system will fail within a relatively short time compared to a well-made mechanical system that can function for centuries. We can avoid this dilemma if the electronic components are included in a non-intrusive way and are easy to replace when it becomes necessary. In the meantime, the organ will not be seriously disabled by failures of these electrical components, since the mechanical system will continue to work. As is usual with modern electrical preset systems, there are the usual features, including hundreds of memory levels and a sequencer.
The wind system is substantial, with four large bellows fitted with all the levers and check valves necessary to foot-pump the organ. When this novelty is utilized and the audience is informed, the performance takes on new meaning. There is a connection to the organ’s legacy—the organ is functioning on a human scale.
All of the four divisions speak directly through the façade—that is, no divisions speak through other divisions, contributing to an easy balance among them. The manual divisions are positioned center case, with Positive at the bottom, Great above, and Swell at the top. The Pedal is divided on each side.
The people of St. Philip Presbyterian are to be much admired for their unyielding support throughout the process leading up to the dedication of the organ in the spring of 2010. I am also humbled by my talented staff who work skillfully and with dedication. We strive to build lasting instruments—instruments that are both durable and very much cherished by those who play them and those who listen. Projects like this have the added benefit of the involvement of a wide group of people, a group too numerous to individually name here. I thank the St. Philip family for their support on many levels throughout the process, and I thank my wonderful crew for their continued excellence and support.
—Paul Fritts
Paul Fritts & Co. Organ Builders

St. Philip Presbyterian Church
Paul Fritts & Co. Organ Builders
Opus 29, 2009

GREAT
16′ Principal*
8′ Octave
8′ Rohrflöte
8′ Salicional
4′ Octave
4′ Spitzflöte
22⁄3′ Quint
2′ Octave
13⁄5′ Terz
IV–VI Mixture
V Cornet (mounted)
16′ Trompet
8′ Trompet
4′ Trompet
8′ Baarpfeife

SWELL
8′ Principal
8′ Bourdon
8′ Violdigamba
8′ Voix celeste
4′ Octave
4′ Koppelflöte
22⁄3′ Nasat
2′ Blockflöte
13⁄5′ Tierce
IV–V Mixture
16′ Fagott
8′ Trompet
8′ Hautbois

POSITIVE
8′ Principal
8′ Gedackt
8′ Quintadena
4′ Octave
4′ Rohrflöte
2′ Octave
11⁄3′ Larigot
II Sesquialtera
IV–V Scharff
8′ Dulcian

PEDAL
16′ Principal
16′ Subbaß
8′ Octave
8′ Bourdon*
4′ Octave
VI–VIII Mixture
32′ Posaune*
16′ Posaune
8′ Trompet
4′ Trompet

*Some pipes transmitted from other stops

Couplers
Swell to Great
Positive to Great
Swell to Positive
Great to Pedal
Swell to Pedal
Positive to Pedal

Compass: Manual, 58 notes; Pedal, 30 notes

Other:
Polished tin front pipes
Solid wood casework with carved pipe shades
Suspended, direct mechanical key action
Mechanical stop action with electric pre-set system
Tremulant
Multiple wedge bellows with foot pumping levers
Wind Stabilizer

70 ranks, 48 stops, 3,488 pipes

Photo credit: Paul Fritts