Cover feature (September, 2005: Dobson)

Three Decades of Building Organs in Lake City, Iowa

John A. Panning

John A. Panning is tonal director of Dobson Pipe Organ Builders. A native of Wisconsin, he worked for two years with Hammes-Foxe Organs, Inc. in the Milwaukee area prior to joining Dobson in 1984. In these twenty years, he has been involved in every facet of pipe organ design, construction and maintenance. Mr. Panning has served two terms as Secretary of the American Institute of Organbuilders, and is currently a member of the AIO Journal committee. He was a member of the National Council of the Organ Historical Society from 1985–1991, and has served on two OHS convention committees. He has been North American Editor of Publications for the International Society of Organbuilders since 1991.

Thirty years ago this month, Lynn Dobson opened an organ building workshop in Lake City. Three decades later, clients from near and far have made the journey to this small western Iowa town.

Lynn A. Dobson, founder of the Dobson Pipe Organ Builders, was born in Carroll, Iowa, in 1949, and grew up on a farm in nearby Lanesboro. In 1966, he received a scholarship from the Hill Foundation to attend the Minneapolis School of Art summer session for gifted students. He graduated from Wayne State College in Wayne, Nebraska, in 1971 with majors in art and industrial education. During his college years, he built a twelve-stop mechanical-action organ in a shed on the family farm; this organ, Op. 1 (II/15), was eventually sold to Our Savior’s Lutheran Church in Sioux City, Iowa, where it still serves today. Upon graduation, Dobson taught high school art in Plattsmouth, Nebraska. However, the desire to be involved with organ building persisted, and in 1974 he left teaching to work for the Hendrickson Organ Company of St. Peter, Minnesota. In November 1974, he established his own firm, opening a small shop at 120 West Main Street in Lake City, Iowa.

What follows is a chronicle of the more important dates in the company’s history, a big-picture overview of three decades of art and craft as practiced by an increasingly prominent Midwestern American organ builder.

1975 ~ The young company’s first contract comes from one of Dobson’s former teachers, Antony Garlick, a music professor and composer at Wayne State College. The ten-stop residence organ incorporates both new and revoiced pipework. When Garlick moved in 1986, he sold the organ to Mary Brooks of Doylestown, Pennsylvania. In 1998, she in turn sold it to The Church of the Holy Spirit in Harleysville, Pennsylvania, and Dobson was once again called upon to move the organ, making several additions to suit its new, larger home. In his first year of business, Dobson is accepted as a member of the American Institute of Organbuilders (AIO).

1976 ~ Olivet Congregational Church, St. Paul, Minnesota, signs a contract for Op. 4 (II/33). The organ’s donor gave his gift to the church on the condition that it help launch the business of a promising young organ builder. At this time Lynn Dobson was assisted by his father Elmer Dobson, Jon Thieszen, who first began as summer help during college and would later become the company’s technical designer, and voicer Robert Sperling, a former co-worker at Hendrickson. The resulting instrument is a monumental achievement for so young a firm.

1979 ~ The company moves to its current location at 200 North Illinois Street, completely renovating the historic building and adding an erecting room with a 30¢ ceiling. In addition to instruments built for area churches, Dobson receives commissions from two Minnesota colleges as the decade closes. The first is a small studio organ for St. Olaf College (Op. 8, II/7; 1978). The second Minnesota institution, Bethany Lutheran College in Mankato, commissions an organ for its chapel (Op. 10, II/21; 1979), located in the school’s historic Old Main building. Op. 10 enjoys wide attention in organ journals. In 1996 it undergoes some tonal additions (increasing its size to 24 ranks) and receives a dramatic revision to its case to better suit its second home, Bethany’s new Trinity Chapel.

1980 ~ The decade opens with larger and more diverse projects, including one less than a block from the original Main Street shop: Lake City Union Church purchases a two-manual instrument (Op. 13, II/29; 1980). Dobson is engaged by Westminster Presbyterian Church of Des Moines, Iowa, to complete the organ (Op. 14, II/38; 1981) left unfinished by Lawrence Phelps Associates after that firm’s insolvency. Nearby Iowa State University in Ames, Iowa, contracts for a practice organ (Op. 16, II/3; 1981) and a teaching studio organ (Op. 21, II/18; 1982). The capabilities of the shop were enlarged during this period by several new employees, among them Tom Kult, a skilled cabinetmaker who later becomes shop foreman; David Storey, an organ builder who had previously worked for Jim McFarland in Pennsylvania; and Lake City native Sally Winter, secretary. Robert Sperling becomes full-time voicer. The firm is accepted for membership in the International Society of Organbuilders and is invited to join the Associated Pipe Organ Builders of America (APOBA); Lynn Dobson is elected to the AIO Board of Directors.

1983 ~ The completion of large two-manual organs for the Church of St. Michael in Stillwater, Minnesota (Op. 23, II/34; 1983) and First Presbyterian Church in Manhattan, Kansas (Op. 24, II/43; 1983) are harbingers of Dobson’s expansion into the rest of the country. Op. 24 is the largest organ built by the firm to date, and is the first organ in the United States to employ a “dual” stop action, one that can be operated mechanically by the organist as well as electrically through a solid-state combination action.

1984 ~ John Panning, an organ builder from Wisconsin, joins the crew this year; he is later appointed the firm’s tonal director. The shop is remodeled and enlarged at this time to accommodate the fabrication of mechanical key action parts and console chassis. In November, the firm celebrates its 10th anniversary with an open house and a recital by Guy Bovet on Op. 13 at Lake City Union Church; hundreds of clients and friends of the company attend.

1985 ~ Op. 28 (II/30; 1985), for The Church of the Holy Comforter in Burlington, North Carolina, is the first of many Dobson instruments to be located outside of the Midwest. From 1985 to 1990, the firm builds twenty new organs in Pennsylvania, New York, North Carolina and Virginia, in addition to five Midwestern states. Eight are for universities and colleges, of which five are institutions affiliated with church bodies: Bethel College, North Newton, Kansas (Op. 27, II/19; 1985), St. Olaf College, Northfield, Minnesota (Op. 29, II/30; 1985), Augsburg College, Minneapolis, Minnesota (Op. 42, III/44; 1988), Calvin College, Grand Rapids, Michigan (Op. 44, III/49; 1989), and Wartburg Theological Seminary, Dubuque, Iowa (Op. 46, II/15; 1989). Op. 42 and 44 are both for new college chapels designed in cooperation with Dobson. New shop personnel by the end of this decade include Meridith Sperling (pipe racking, general organ building), Lyndon Evans and Randy Hausman (cabinetmakers), Dean Heim (general organ building, and later shop foreman), Art Middleton (key action and consoles) and Bob Savage (leatherwork and electrical). Dobson hosts the annual spring meeting of APOBA, during which the firm is elected president.

1989 ~ The first AIO Midyear Seminar is held at the Dobson shop. Twenty organ builders from across the country participate in lectures on case design and construction, cost accounting, shop administration and equipment. By this time the firm is well known for its artistic and innovative organ case design.

1990 ~ Gradual evolution of the firm’s tonal style continues. Although specialized instruments such as the organ in Italian style for Indiana University (Op. 35, II/26; 1987) have been built, most are of eclectic design. Earlier instruments explored the neo-classic aesthetic; new projects blend both classical and romantic influences. Op. 44 (1989) at Calvin College includes a 16¢ Open Wood in the Pedal, two enclosed divisions and a rich, smooth tonal palette. Joining the firm this year are Kirk Russell (business manager) and Dean Zenor, an organ builder from Connecticut.

1992 ~ Two instruments built this year demonstrate the firm’s range. Op. 55 (II/32) for St. John Lutheran Church in Storm Lake, Iowa, features Kirnberger III tuning, dual wind systems (a wedge bellows for flexible wind, a parallel-rise bellows and wind stabilizers for steady wind) and a freestanding case with attached console at the rear of the church. The chancel location and Anglican church music emphasis of St. Luke’s Episcopal Church, Kalamazoo, Michigan, result in Op. 57’s (II/42) more romantic tonal design. Op. 56 (II/17), for Trinity Lutheran Church, Manhattan Beach, California, is the first Dobson installation on the West Coast. The firm is incorporated as Dobson Pipe Organ Builders, Ltd., a new 4,500 sq. ft. wood shop is built, and a pipe shop is set up. The company becomes a prize sponsor for the National Improvisation Competition of the American Guild of Organists.

1993 ~ Op. 60 (III/49) for First United Methodist Church, Mesa, Arizona, the firm’s seventh three-manual instrument, features a Solo as the third manual rather than a more customary Positive or Choir. Voiced on 6≤ wind pressure with mechanical action, this division includes an 8¢ Harmonic Flute, 4¢ Flute Octaviante, Cornet V, and 8¢ Bombarde, all under expression except for the Cornet, which is mounted outside the Solo enclosure.

1995 ~ The mid-’90s see an even wider variety of projects, ranging from Op. 62 (II/11; 1994), a residence organ for Rich Wanner in Berkeley, California, to the 1996 renovation of the important four-manual 1959 Schlicker organ at Valparaiso University, Valparaiso, Indiana, and its enlargement to 102 ranks. Other notable organs delivered are Op. 65 (II/36; 1995) for the University of South Carolina, Columbia, South Carolina, Op. 67 (II/32; 1996) for Wartburg College, Waverly, Iowa, and Op. 69 (II/31; 1997) for Pakachoag Church, Auburn, Massachusetts. Voicer and pipemaker William Ayers joins the firm during these years.

1998 ~ The organ for St. Paul’s Episcopal Church in Minneapolis, Minnesota, (Op. 70, II/45) unabashedly combines classical and romantic tonal elements in a fresh and original way. This same line is followed in the large three-manual instrument for West Market Street Methodist Church in Greensboro, North Carolina (Op. 71, III/58; 1999), voiced in collaboration with Los Angeles organ builder Manuel Rosales. A somewhat more classical course is taken with the instrument at St. Joseph Abbey in St. Benedict, Louisiana (Op. 73, III/38; 2000), which is greatly enhanced by the Abbey church’s five seconds of reverberation. Joining the firm by the end of the decade are Scott Hicks (general organ building), Gerrid Otto (windchests, general organ building), John Ourensma (voicing, pipemaking) and Randall Pepe (wood pipemaking and general organ building).

2000 ~ The firm’s work at the beginning of a new century includes the monumental instrument for the Cathedral of Our Lady of the Angels in Los Angeles, California (Op. 75, IV/105; 2003) and the company’s first contract for a major concert hall, Verizon Hall in Philadelphia’s Kimmel Center for the Performing Arts (Op. 76, IV/125; 2006), the new home of the Philadelphia Orchestra. These high-profile projects bring Dobson into collegial working relationships with world-famous architects: José Rafael Moneo for the cathedral project and Rafael Viñoly for the concert hall.

2003 ~ Not to be lost among the contracts for immense organs are instruments of more normal size delivered to churches and universities in Delaware, Illinois, and Minnesota. Op. 78 (III/42) for St. John’s Methodist Church in Augusta is Dobson’s first instrument in Georgia, housed in an elegant cherrywood case with carved pipeshades. Joining the firm during the first years of the century are Antal Kozma (technical design) and Donny Hobbs (general organ building, voicing, pipemaking).

2004 ~ Op. 80 (II/26), for St. Paul’s Church, Rock Creek Parish, Washington, D.C., was set up and played in Lake City during a 30th anniversary open house. To further celebrate, a festive reception for friends of the company was held during the Los Angeles AGO convention following Martin Jean’s recital on Op. 75 at the Cathedral of Our Lady of the Angels. The second phase of the installation of Op. 76 (IV/125) in Verizon Hall takes place during the summer, while Op. 79 (II/23), for Shepherd of the Bay Lutheran Church, Ellison Bay, Wisconsin, is installed in the fall. Ongoing design work includes a significant concert hall instrument for the new Atlanta Symphony Center, designed by famed architect Santiago Calatrava of Zürich. Instruments for the Chapel of the Cross in Chapel Hill, North Carolina, and the Lutheran Church of the Good Shepherd in Lancaster, Pennsylvania, give the shop a small respite between these large projects.

Since 1994, the daily operation of the shop has been under the direction of a management team consisting of Lynn Dobson (president and artistic director), John Panning (tonal director), Jon Thieszen (technical designer), Dean Heim (shop foreman), Dean Zenor (project manager) and Kirk Russell (business manager).

News, specifications of every organ, and many photographs can be found on Dobson’s website at

<www.dobsonorgan.com&gt;.

Dobson Pipe Organ Builders, Ltd.

William Ayers, 1994, voicer, pipemaker

Mitch Clark, 2004, technical designer

Lynn A. Dobson, 1974, president and artistic director

Lyndon Evans, 1988, cabinetmaker

Randy Hausman, 1988, cabinetmaker

Dean Heim, 1988, shop foreman, general organbuilding

Scott Hicks, 1997, general organbuilding

Donny Hobbs, 2003, general organbuilding, voicing

Antal Kozma, 2001, technical designer

Arthur Middleton, 1987, machinist, key action, wood pipes

Gerrid D. Otto, 1998, windchests, general organbuilding

John Ourensma, 1999, voicer, pipemaker

John A. Panning, 1984, tonal director, voicer

Kirk P. Russell, 1990, business manager

Robert Savage, 1989, leatherwork, electrical, general organbuilding

Meridith Sperling, 1985, windchests, general organbuilding

Jon H. Thieszen, 1975, technical designer

Sally J. Winter, 1983, accounting and secretarial

Dean C. Zenor, 1990, key action, administrative

Dobson Pipe Organ Builders,
Lake City, Iowa
The Lutheran Church of the Good Shepherd,
Lancaster, Pennsylvania

Dobson Pipe Organ Builders of Lake City, Iowa, has completed its Op. 83 for the Lutheran Church of the Good Shepherd in Lancaster, Pennsylvania. The church building, dedicated in 1973, required updating of its HVAC systems as well as minor changes to the gallery to accommodate the organ. The project then expanded to include new lighting and sound systems, an elevator to the choir room and gallery, and other architectural changes to improve liturgical functions and make the nave completely handicapped accessible. The design team included Donald Main of M&M Architects, acoustician Scott Riedel, the Rev. Marilyn Witte, cantor, and the Rev. Mark Russell, senior pastor.
The organ’s freestanding case is made of hard maple with a natural finish, and features a multi-dimensional façade designed to give interest to what would otherwise be a disproportionately wide layout. In stepped groups of three and five, the pipes of the Great and Pedal 8' Prestant stops are punctuated by burgundy painted wood pipes of the 16' Bourdon. Horizontal maple boards backed with China blue grille cloth form the toeboards at the lowest levels, then recede to become a screen behind the façade pipes. The case wings support the remainder of the 16' Bourdon, the entire 16' Subbass, and the interior treble pipes of the Pedal Prestant. The manual divisions are located at impost level behind the façade; the Great is on the right side, the Swell on the left. The full-length Pedal 16' Trombone stands on the lower case floor and rises between the manual divisions. The organ employs mechanical key action for the manuals, electric action for the Pedal, electric stop action and an eight-level combination action. The organ is voiced on a wind pressure of 76 millimeters, which is supplied by a large, weighted single-rise bellows. Principal and string pipes are 75% tin, while flutes are either 30% tin or wood.
A festival Eucharist of rededication and dedication of the organ took place on September 17, 2006 with the Rev. Marilyn Witte, cantor, at the organ. Martin Jean, of Yale Institute of Sacred Music, played the dedicatory recital in the afternoon. Additional programs included recitals by Mark Mummert, Paul Jacobs and Gerre Hancock.
—John A. Panning
Dobson Pipe Organ Builders

GREAT (I)
16' Bourdon 58 pipes
8' Prestant (partly in façade) 58 pipes
8' Chimney Flute 58 pipes
4' Octave 58 pipes
4' Spire Flute 58 pipes
2' Fifteenth 58 pipes
22'3' Cornet III (mounted, g20–d51) 96 pipes
11'3' Mixture IV 232 pipes
8' Trumpet 58 pipes
Swell to Great

SWELL (II, enclosed)
8' Lieblich Gedackt 58 pipes
8' Viola 58 pipes
8' Viola Celeste (FF) 53 pipes
4' Principal 58 pipes
4' Harmonic Flute 58 pipes
2' Piccolo 58 pipes
1' Mixture III 174 pipes
8' Oboe 58 pipes
Tremulant

PEDAL
16' Subbass 32 pipes
16' Bourdon (Gt)
8' Principal (partly in façade) 32 pipes
8' Gedackt (ext) 12 pipes
4' Choralbass (ext) 12 pipes
16' Trombone 32 pipes
8' Trumpet (ext) 12 pipes
Great to Pedal
Swell to Pedal
Zimbelstern

Dobson Pipe Organ Builders,
Lake City, Iowa
University of Delaware,
Newark, Delaware
For years without a pipe organ on campus, the University of Delaware in Newark is now the home of Dobson Op. 74, a two-manual mechanical-action instrument of 22 ranks. Made possible by the generosity of Edward and Naomi Jefferson and named in their honor, the new organ is installed in the original home of Newark’s St. Thomas Church (Episcopal), which stands adjacent to the campus and was purchased and restored by the university for use as a small recital hall. Deconsecrated in 1956, the former church’s subsequent physical decline has been arrested by a careful restoration directed by Homsey Architects of Wilmington, Delaware.
Located in an intimate setting with only seventy seats, Op. 74 has been designed primarily for use as a teaching and recital instrument. It is capable of accommodating a generous range of organ literature and is well suited for use with small instrumental ensembles. Because of the modest size of the hall, the voicing treatment emphasizes warmth and color rather than strength or brilliance. The metal pipes are made of alloys containing from hammered 12% tin to burnished 75% tin. The Pedal Subbass and basses of the manual 8' flute stops are made of poplar and cherry, while the Great Flute 4' has open pipes of hard maple. The instrument is voiced on a wind pressure of 70 millimeters, supplied from a large, weighted, single-rise reservoir.
The instrument’s location in a balcony of modest depth led to the unusual placement of the console on the right side of the instrument when viewed from the front. The Great is located immediately adjacent to the console; the Swell, whose enclosure has shutters on three sides, is in the center of the case; the Pedal is at the left side. The casework is constructed of white oak with a fumed, oiled and lacquered finish, and is embellished with colors and 24K gold leaf. The woodwork of the drawknob console incorporates black walnut, ebony, rosewood, Carpathian elm burl and cow bone. The instrument has mechanical key and stop actions. For increased versatility, a system of mechanical duplexing permits the three Pedal voices to play at both unison and octave pitches.
Dedication series recitalists included David Herman (Trustees Distinguished Professor of Music and University Organist), Thomas Trotter, and William Owen. In addition to being the first organ on campus, the instrument carries another distinction: it is thought to be the first pipe organ whose entire installation, from delivery to final tuning, was broadcast live on the Internet. Video clips and stills recorded by the webcam can still be found at
<http://www.udel.edu/pipeorgan/&gt;.
—John Panning

GREAT (58 notes)
8' Prestant
8' Chimney Flute
4' Octave
4' Flute
2' Super Octave
11⁄3' Mixture IV
8' Trumpet
Swell to Great

SWELL (58 notes, expressive)
8' Bourdon
8' Salicional
4' Principal
4' Chimney Flute
2' Piccolo
11⁄3' Gemsquinte
22⁄3' Cornet II
8' Oboe
Tremulant (affects entire organ)

PEDAL (32 notes)
16' Subbass
8' Principal
8' Gedackt (ext)
4' Choralbass (ext)
16' Trombone
8' Trumpet (ext)
Great to Pedal
Swell to Pedal

Fowler Organ Company, Lansing, Michigan, Opus 21
Andrews University, Theological Seminary Chapel
Berrien Springs, Michigan
The instrument is centered in the front of the chapel, which seats approximately 400. It is housed in a free-standing case built of red oak with the console contained within the case. The case is a contemporary adaptation of a classic case form with the bass pipes of the 8' Principal/8' Pedal Octave in flamed copper. The upper flat is from the Great Principal, the lower flat is the Pedal Octave, both in polished tin.
Since the instrument dominates the front of the chapel, it was felt that it needed to make a statement of purpose beyond simply being a musical instrument. The pipe shades were designed in collaboration with the builder and carved by Norman Moll; he and his wife Dorothy are significant benefactors to the university and to this instrument. The carvings are symbols that can be seen both in a traditional sense and yet be open to wider interpretation. The center tower contains the circle surrounding the Alpha and Omega, representing God the Father and creator eternal. The other carvings—the dove, the lamp, the book, and the praying hands—can be interpreted in a variety of ways depending on the experiences of the viewer. These are set on a background of rays radiating outward, clad in flamed copper.
The layout of the instrument follows the case design with the Swell in the lower center, the Great directly above, and the Pedal divided on either side. The action is electro-mechanical throughout, and the operating system is multiplex solid state. This includes a multi-memory combination action, transposer, and MIDI control with onboard synthesizer and sequencer. The manual keys are rosewood with maple sharps; the drawknobs were hand turned from hard maple by Mr. Moll’s father.
Tonal design follows an “American Classic” model. The flues are generously scaled, voicing is lightly articulate and clearly defined. The reeds are quite colorful and distinctive. The Great Cromorne, built with “clarinet” style resonators and closed German shallots, has the ability to play solo or blend into the ensemble. The Trompette is extended to 16' with half-length basses and Cavaillé-Coll-style shallots.
—Brian Fowler

GREAT
8' Principal
8' Bourdon
4' Octave
4' Rohrflute
22⁄3' Nazard
2' Blockflute
13⁄5' Tierce (T/C)
III Mixture
8' Trompette (Sw)
8' Cromorne
Tremulant
MIDI on Great
16' Swell to Great
8' Swell to Great
4' Swell to Great
16' Great
Unison Silent
4' Great

SWELL
8' Holz Gedeckt
8' Viole de Gambe
8' Viole Celeste (T/C)
4' Harmonic Flute
4' Viola
2' Principal
8' Trompette
8' Cromorne (Gt)
4' Clarion
Tremulant
MIDI on Swell
16' Swell
Unison Silent
4' Swell

PEDAL
32' Resultant Bass
16' Subbass
16' Gedecktbass
8' Octave
8' Bourdon
4' Choralbass
2' Doublette
16' Bombarde
8' Trompette
4' Cromorne
MIDI on Pedal
8' Great to Pedal
4' Great to Pedal
8' Swell to Pedal
4' Swell to Pedal

Accessories
Multi-memory combination action
Transposer
Sequencer
Digital synthesizer
Balanced swell expression
Crescendo pedal

 

Cover

Lauck Pipe Organ Company, Otsego, Michigan

Trinity Christian College, Palos Heights,
Illinois

Trinity Christian College is a four-year liberal arts college founded in
1959 and located in Palos Heights, Illinois, a suburb 25 miles southwest of
Chicago. It is dedicated to providing students with a quality higher education
in the Reformed Christian tradition. The college has grown extensively in
recent years with many new buildings erected. In 2001, the college dedicated a
new 1,200-seat auditorium: The Martin and Janet Ozinga Chapel. The chapel is
also the home of the college's music department with faculty offices, rehearsal
rooms, a recital hall, a music computer lab, and practice rooms. An organ for
the auditorium was envisioned from the building's conception.

Under the chairmanship of music department chair Helen Van Wyck, a committee
was formed to choose a builder for the organ. Paula Pugh Romanaux was selected
as the consultant to work with the committee. After visiting several of our organs,
Lauck Pipe Organ Company was chosen to build the organ. Working with the
builder, the committee decided that the instrument would be located at the back
of the stage and would occupy the central position. The committee felt that an
organ with a detached console would prove more flexible, especially when used
with orchestra and to accompany small ensembles.

Several designs for the organ case were prepared ranging from traditional to
contemporary, the latter being chosen. The proportions of the case are generous
in order to fill the expansive rear wall of the stage area. The façade
consists of the 16' Principal, 8' Pedal Octave and the 8' Great Diapason,
with  pipes of polished tin. The
casework is arranged so that the Pedal division occupies the center and two
outer towers. Between the left and center tower is the Great Principal chorus
with the Choir division above. Between the right and center towers are the
Great flutes and reed with the Swell division above. A shallow case with
expression shades capable of a full range of motion allow for excellent egress
of sound. The emblem at the top of the center tower is the college's logo done
in relief and gilded.

Over the past 30 years, we have built many French-terraced consoles with
curved terraces, but Marilyn Mulder, the school's organ instructor, suggested a
console based on a design she saw at Chicago's Orchestra Hall. From her
photograph, we designed and built a console with straight, oblique terraces.
The woodwork is of cherry to match other furnishings in the chapel. The
terraces, keycheeks, manual and pedal sharps, and drawknobs are all of
rosewood. The manual naturals are of bone. Peterson supplied the MIDI system
and combination action. Lauck manufactured the coupler and relay systems, as
well as the electric expression servos.

The room, alas, suffers from insufficient reflection of sound. As we worked
with the acoustician and architect, the organ committee and I realized we would
not be able to have all of our requests granted; the acoustician was more
interested in absorbing rather than reflecting sound. The architect and
building committee did agree that the expansive drywall ceiling would be well
supported and made up of a double layer glued together so as to not absorb the
lower frequencies. Preliminary acoustical tests of the room proved that we
needed a lot of sound to fill it. The organ had to be scaled very boldly, with
variable scales and higher cut-ups being freely employed. In addition, generous
wind pressures, especially in the reeds, would be used. Our tonal concept was
to establish well-developed Principal choruses in each division, colorful and
contrasting flute choruses, and chorus reeds that bind together well. This goal
was achieved and supplemented by colorful solo reeds and strings with character
and variety.

The Great is based on a 16' Principal. The 8' extension of the Principal can
be used as a second Diapason and creates a rich fond d'orgue with the open and
stopped flutes. Mutations provide for a Great Principal Cornet. To ensure a
bold, full pedal, the 16' Diapason is really a 16' open wood located in the
central tower of the case. The Great 16' Principal is also available in the
Pedal for use in lighter textures, while the 8' Octave and 4' Choralbass are
independent. The Trumpet-en-Chamade is made of tin and is voiced on 10 inches
of wind pressure using domed parallel shallots. The Pedal Trombone unit is also
voiced with domed parallel shallots on 8 inches of wind pressure. The Swell
reeds are on 6 inches of wind with the Bassoon/Oboe having tapered shallots and
the Trumpet/Clarion parallel shallots. The Swell Gamba and Gamba Celeste are
slotted with rollers throughout. It is a well-developed string tone with good
strength and carrying power; however, the expression boxes and shades are
heavily built and can make the strings evaporate when desired. The Swell also
has a Flute Celeste, which is built as a Ludwigtone; basically, two wood pipes
built with a common middle wall on one foot. The Choir Viola and Viola Celeste
are of about equal power to the Swell strings but are not slotted and are of a
broader tone quality. They are voiced to work together perfectly yet retain
their individual colors.

The Lauck employees that built Opus 55 include: Craig Manor, console design
and construction, wood pipes; Ken Reed, pipemaker, office manager; Ben Aldrich,
design, windchests, foreman; Bob Dykstra, windchests, wood pipes, casework;
Dick Slider, windchests, lower casework; Dan Staley, circuit board
manufacturing, wiring; Jim Lauck, design, voicing, tonal finishing; Jonathan
Tuuk; tonal finishing.

--Jim Lauck

Lauck Opus 55, 2002

3 manuals, 46 ranks, electric action

GREAT

16' Principal  (61 pipes)

8' Diapason (61 pipes)

8' Principal (12 pipes)

8' Rohrflute (61 pipes)

8' Flute Harmonique (61 pipes)

4' Octave (61 pipes)

4' Principal (12 pipes)

4' Flute Octaviante (12 pipes)

22/3' Quint (61 pipes)

2' Superoctave (61 pipes)

13/5' Tierce (61 pipes)

IV Fourniture (244 pipes)

8' Trumpet (61 pipes)

8' Trumpet-en-Chamade (61 pipes)

                        Great
to Great 4

                        Swell
to Great 16-8-4

                        Choir
to Great 16-8-4

                        Zimbelstern

SWELL

16'  Bourdon (12 pipes)

8' Bourdon (61 pipes)

8' Gamba (61 pipes)

8' Gamba Celeste (49 pipes)

8' Flute Celeste (49 pipes)

4' Principal (61 pipes)

4' Spitzflute (61 pipes)

2' Blockflute (12 pipes)

V Mixture (293 pipes)

16' Bassoon (61 pipes)

8' Trumpet (61 pipes)

8' Oboe (12 pipes)

4' Clarion (12 pipes)

Tremulant

Swell to Swell 16-UO-4

CHOIR

8' Gedeckt (61 pipes)

8' Viola  (61 pipes)

8' Viola Celeste (49 pipes)

4' Principal (61 pipes)

4' Koppelflute (61 pipes)

22/3' Nazard (61 pipes)

2' Octave (61 pipes)

2' Flautino (12 pipes)

13/5' Tierce (61 pipes)

11/3' Larigot (5 pipes)

III Scharff (183 pipes)

8' Cromorne (61 pipes)

8' Trumpet-en-Chamade (Gt)

Tremulant

Choir to Choir 16-UO-4

Swell to Choir 16-8-4       

PEDAL

32' Sub Bourdon (electronic ext)

16' Diapason (open wood) (32 pipes)

16' Principal (Great)

16' Subbass (32 pipes)

16' Bourdon (Swell)

8' Octave  (32 pipes)

8' Principal (Great)

8' Bass Flute (12 pipes)

4' Choralbass  (32 pipes)

II Rauschquint (64 pipes)

II Mixture  (24 pipes)

32' Contra Bassoon (electronic ext)

16' Trombone (32 pipes)

16' Bassoon (Swell)

8' Trumpet (12 pipes)

4' Clarion (12 pipes)

4' Cromorne (Choir)

Great to Pedal 8-4

Swell to Pedal 8-4

Choir to Pedal 8-4

Lauck Pipe Organ Company

92 - 24th Street

Otsego, MI 49078-9633

Telephone: 269/694-4500

Fax: 269/694-4401

<[email protected]>

Cover photo by Richard Lanenga

 

Paul Fritts and Co., Tacoma,
Washington, has built a new organ for Vassar College, Poughkeepsie, New York.
The mechanical-action pipe organ is installed in the 500-seat Mary Anna Fox
Martel Recital Hall of the Belle Skinner Music Building. It contains 34 stops
distributed over two manuals (Hauptwerk and Positiv) and Pedal.

The tonal design reflects both the North and Middle German schools of
organbuilding from the first half of the eighteenth century. North German
features include fully independent manual and pedal divisions with
well-developed upper work; a full spectrum of mutation stops (two on double
draws); and seven reed stops, 20% of the registers. Middle German building is
represented by a variety of six manual 8' flue stops; the “gravity”
of 16' stops in each manual division and four 16' pedal stops; a Tierce rank
which can be added to the Hauptwerk Mixture; and the inclusion of the Positiv
division in the main case, rather than positioned to the rear of the player.

The northern features pay homage to the seventeenth-century style of Arp
Schnitger and the middle German school points more to the pre-Romantic
eighteenth-century styles of Wender, Trost, Hildebrandt and others. The new
Vassar organ is well-suited for music of J. S. Bach with its cosmopolitan
mixture of northern, middle, and southern European traits. Other literature
from the sixteenth-century through the works of Mendelssohn will also sound to
advantage.

The new organ is placed centrally in a gallery nine feet above the stage
floor in the front of the hall. The case has a bright burgundy enamel finish.
Gold leaf highlights the gray painted pipe shades. The case and many internal
parts are crafted from popular. 
Many other woods were chosen for their various properties, including
mahogany, oak, maple, ebony, redwood and sugar pine.

Along with the new organ came alterations to the organ gallery and stage
area significantly improving acoustics, and a climate control system for the
recital hall. The Marian and Speros Martel Foundation Inc. donated funds
covering both the organ and hall improvements. Glenn D. White recommended
acoustical improvements, and Richard Turlington designed architectural plans
for the room. Frances D. Fergusson, President of Vassar College, initiated the
project. George B. Stauffer was consultant.

To inaugurate the new instrument, Merellyn Gallagher, James David Christie,
and Joan Lippincott played solo recitals in February and March 2003.

HAUPTWERK

16' Principal

8' Octava

8' Rohrflöte

8' Viol di Gamba

4' Octava

4' Spitzflöte

Nasat/Cornet II*

2' Superoctava

Mixture Tierce

Mixture IV–VI

16' Trompet

8' Trompet

POSITIVE

8' Geigenprincipal

8' Gedackt

8' Quintadena

4' Octava

4' Rohrflöte

2' Octava

2' Gemshorn

11/3' Quinte

Quint/Sesquialtara II*

Mixture IV–V

16' Fagotto

8' Dulcian

PEDAL

16' Principal**

16' Violon

16' Subbass

8' Octava***

8' Bourdon***

4' Octava

Mixture V–VII

16' Posaune

8' Trompet

4' Trompet

* Double draw

** Bottom octave transmission from Hauptwerk

*** Extension

Couplers

                        Positiv
to Hauptwerk

                        Hauptwerk
to Pedal          

                        Positiv
to Pedal

Manual/Pedal compass: 56/30, flat pedalboard

Burnished tin front pipes

Solid wood casework with pipe shades carved by Judy Fritts

Suspended key action

Mechanical stop action

Variable tremulant

Three bellows fitted with pedals for foot pumping

Wind stabilizer

Pitch: A 440

Temperament: Kellner

Wind pressure: 74 mm. (ca. 3≤)

Fabry Pipe Organs, Inc., of Fox
Lake, Illinois, has completed the 5-rank antiphonal division added to the
original Möller organ in Faith Evangelical Lutheran Church, Homewood,
Illinois.

Fabry Inc. installed the original M.P. Möller instrument (2 manuals, 19
ranks) in 1980 in the rear balcony of the sanctuary and has been maintaining
the organ since that time. The console was prepared for an antiphonal division.
On many occasions while tuning the instrument, the organist, Mrs. Phyllis
Silhan, would always say, “I hope I get to see this instrument completed
before I retire.” Twenty-two years later, the church elected to add the
antiphonal division.

The new antiphonal division was installed in October of 2002. The original
specification for this division--8' Gedeckt, 4' Gemshorn, 2' Flautino, II
Mixture--was changed to 8' Gedeckt, 4' Octave, 4' Harmonic Flute, 2' Fifteenth,
and 8' Oboe. A new solid-state relay was provided that is totally prepared for
the addition of a small antiphonal console.

Fabry Inc. would like to thank the organist, Mrs. Phyllis Silhan, and
Reverend Dr. Timothy Knaff, who coordinated the entire project. David G. Fabry
built all the chestwork and new casework. Crew leader Joseph Poland handled the
installation.

GREAT

8' Principal

8' Bourdon

4' Octave

2' Super Octave

IV Fourniture

8' Trompette (Sw)

SWELL

8' Rohrflote

8' Viola

8' Viola Celeste

4' Spitz Principal

4' Rohrflote (ext)

2' Hohlflote

III Scharf

8' Trompette

ANTIPHONAL (new division)

8' Gedeckt

4' Octave

4' Harmonic Flute

2' Fifteenth

8' Oboe

PEDAL

16' Contra Bass

16' Rohr Bourdon (ext)

8' Principal (Gt)

8' Rohrflote (Sw)

4' Nachthorn

16' Bombarde (ext)

4' Clarion (Sw)

COUPLERS

                        Gt
& Sw to Ped 8

                        Sw
to Gt 16-8-4

                        Gt
4

                        Sw
16-UO-4

                        Antiph
to Ped 8

                        Antiph
to Gt 8

                        Antiph
to Sw 8

John-Paul Buzard Pipe Organ Builders, Champaign, Illinois

Opus 31: St. Bede Catholic Church, Williamsburg, Virginia

This new instrument was just installed this spring, the tonal finishing completed during April and June. This is the 31st new pipe organ built by John-Paul Buzard Pipe Organ Builders of Champaign, Illinois, and
the first of two new Buzard organs to be installed in Williamsburg churches. Williamsburg Presbyterian Church will receive Opus 32 next spring for their new Georgian style building at the entrance to Colonial Williamsburg.

The organ at St. Bede Catholic Church is the result of eight
years of planning and dreaming, hoping and praying. St. Bede’s
communicant strength is about 3,000 families, formerly located in a small
landlocked building close to Colonial Williamsburg. The former site simply could not accommodate the parish’s phenomenal growth, nor could the entire parish worship together. When planning the new building, St. Bede’s pastor, the Rev. Monsignor William Carr, insisted that the new
church include a pipe organ, and that the organbuilder be commissioned to work with the architect from the beginning. The new building, designed by architect Tom Kerns, seats 1,500 and is expandable to seat 2,000.

The then music director, and later consultant for the project, Steve Blackstock, formed a musical instruments committee to select the
organbuilder, as well as other musical instruments for purchase. The musical instruments committee directly communicated with the parish’s building committee (called the core committee) as the new building was planned, to make sure that the organ’s requirements were supported throughout the process.

Even though this church is not located in the Colonial District, there was great concern on the part of the core committee that the building relate to the area’s Georgian architecture--no small feat for a big round room--and that, since the organ case would be the significant visual element in the church, it must reflect appropriate features of Georgian design. A great emphasis was placed on the importance of art and
music as direct participants in liturgical expression, and the organ had to
appeal to all the senses in this surprisingly intimate--although rather
large--space. 

As the building’s design process unfolded, and the cost estimates exceeded projections, significant “value engineering” of the building was undertaken to allow the church to be built. The organ project was shelved and its estimated cost applied toward the building. It became apparent that an organ, whenever it would be installed, would need a small antiphonal division at the opposite end of the church to assist in congregational singing, due to a change in building materials.
Certain stops in the organ were prepared for future addition, to lower the
initial price. The music personnel changed, and the parish concentrated upon building the church. 

Once the building was up, Monsignor Carr’s passion for building the new pipe organ was rekindled. His love of fine art and artistic liturgical expression is infectious. It was through his inner fire that he established the notion in the minds of the parishioners that the church was simply not finished until the pipe organ was installed. Although at the time the church did not have an organist, our contract was signed the week following
the new building’s dedication. 

As the organ’s installation date approached, the parish hired organist Neil Kraft of Ohio to be their new director of music. He has already established himself in the Tidewater area as a musician of high
caliber, and the perfect person to develop an inclusive parochial music
program, with the organ as the principal musical instrument. A concert series to celebrate the dedication of this new instrument is being organized. The opening recital was played by Erik Wm. Suter on Sunday, September 30, and John Scott will play in June of 2006. The church is working on sponsorship of a concert featuring the Virginia Symphony, but this is currently in the planning stage. The new pastor, the Rev. John Abe, is committed to making St. Bede known for beautiful music, both in liturgical and concert contexts, for Williamsburg and the greater Tidewater area.

The organ case stands three stories tall and is made of 11/2-inch thick solid white oak and white oak veneers. Walnut is used for the pipe shades and accenting trim details. This is truly heroic cabinet making! The façades incorporate pipes of the Great 16’ Double Open
Diapason (the low 20 notes of which are shared in the pedal), the Great First and Second 8’ Open Diapasons, and the Pedal 8’ Principal. The
16’ Pedal First Open Diapason of wood stands behind the organ case and is stained and finished in a dark walnut color. Resonators of the low octaves of the Pedal 32’ and 16’ Trombones are made of beautiful, clear pine, continuing upscale in thick 52% tin pipe metal as this stop becomes the manual Tromba, voiced on 7” wind. The big Tuba stands vertically in the Choir box just behind the shutters, and is certainly the Tromba’s big brother, being voiced on nearly 30” pressure!

The Procession Organ’s case is also of white oak, to match the Main Organ case. Its pipe shades are carved basswood. Celtic crosses
have been cut into the tower tops and are enameled in rich, dark purple (the manufacturer’s color name “Monsignor” led to the whimsical
decision to incorporate it into the case in honor of Monsignor Carr), and
outlined in gold leaf. When played with the Main Organ, the Processional
Organ’s two Principal stops have the effect of “pulling” the sound out of the Main Organ’s case and surrounding the listeners with an
incredibly inescapable, voluptuous tone.

The console of 11/2-inch thick white oak is attached to an easily moved platform. And it’s a good thing, because the organ is heard in its best balance starting about 15 feet away from the case. We utilize
AGO radiating, concave pedalboards for their superior ergonomics. In a modern, eclectic pipe organ, the pedalboard’s shape should not limit an
organist’s ability to play in styles other than that which a flat pedalboard
dictates.

Those who have followed our work know that our instruments
are liturgical organs that play literature remarkably well. Our style is in
direct response to the need for an organ to function liturgically and
musically, but not at the expense of a particular historical, national, or
idiosyncratic musical style. Only a classic concept of organbuilding can truly accomplish this, and I think only an organist-trained organbuilder has the ability to empathize with modern American musical requirements, reconcile these to classic organbuilding practices, and know how to achieve the intended results. 

Slider windchests keep the tonal design physically honest,
and offer speech, voicing, and tuning advantages (as well as virtually no
long-term maintenance). Our proprietary Slider Pedal Chest allows us to play a single rank of pedal pipes at several pitches--without giving up slider chest speech, tuning stability, and repetition characteristics. Because they’re pedal stops, and usually only one note is played at a time, we can scale these individual ranks to be appropriate for two or three tonal contexts and save the client some money. 

Although we were one of the first American organbuilders to
reintroduce the Tuba into modern practice, in 1991 at the Chapel of St. John the Divine in Champaign, our tonal innovations are often of a subtler (and quieter) nature.  For example, in this organ we have specially developed Dolcan-shaped pipes for the metal top octaves of open wood ranks; they sound like wood pipes, but stay in tune. We have perfected Walter Holtkamp’s Ludwigtone as our Flute Cœlestis, its plaintive and gentle celesting tone evocative of something heavenly, which
explains the pun in the nomenclature. We have refined the 18th-century French Flûte à Bibéron (“Baby-Bottle Flute”) to be a colorful chimney flute tone suitable for solos, the foundation of a flute chorus, or secondary foundation for a principal chorus.

The sound of the organ is warm and rich, filling the space
nicely with a generous foundation. Each chorus has its own distinctive color, so there is no redundancy within each family of sound. The organist is able to lead congregational singing with a wide variety of color, at many different volume levels. And, recitalists won’t be disappointed in the tonal
resources and the informed manner of their disposition and execution. 

Everyone seems to have found “favorite” stops in this instrument. Of course the Pontifical Trumpets titillate the eye and ear, and most visitors want to hear them right off the bat. However, my 16-year-old son Stephen, already an organist of greater accomplishment than his father, fell in love with the Choir 8’ English Open Diapason while preparing a recital for the Tidewater POE held last June. “It has something to tell you,” he says. What higher compliment can an organbuilder receive? After all, shouldn’t pipe organs have a strong emotional appeal, so that when played they grab you and don’t let go? yes"> 

Henry Willis once said that truly great organs are only created when 90% of the project’s effort is expended upon the last 2% of perfection. After the organ is built, installed, and voiced, it’s that last step of careful, time-consuming, painstaking tonal finishing that imparts a living soul into the instrument. That you feel “connected” while listening or playing is no happy accident, but the result of careful listening and exacting craftsmanship on the part of the voicer working on the pipes. It is only when one is working at this level that organbuilding is truly an art.
And, it is only when clients have the sensitivity and sensibility to know the
difference that truly world-class pipe organs are commissioned.
style="mso-spacerun: yes"> 

It has been a tremendous honor to build this instrument, and
to work with Father Abe, Monsignor Carr, Steve Blackstock, Neil Kraft, and the wonderful people at St. Bede’s Church. We look forward to many years of wonderful music-making and musically inspired liturgies at St. Bede’s.

Deepest thanks to the staff of Buzard Pipe Organ Builders who have made this instrument so much more than the sum of its parts:

Charles Eames, executive vice-president, chief engineer,
general manager

Brian K. Davis, associate tonal director, head voicer, director, tonal department

Phillip S. Campbell, business manager

Keith Williams, director, service department

Shayne Tippett, shop manager

Stuart Martin, cabinet maker

C. Robert Leech, cabinet maker

Bob Ference, cabinet maker and service technician

Lyoshia Svinarski, wind system construction

Kenneth McCabe, wind system construction

Ray Wiggs, console, electrical systems, wind chest
construction

Evan Rench, pipe maker, voicer, racking, tonal associate

Stephen P. Downes, pipe preparation, racking, tonal
associate

Todd Wilson, service technician, installation

Stuart Weber, service technician

Jay K. Salmon, office manager

JoAnne Rench, receptionist

--John-Paul Buzard

43 straight speaking stops, 54 ranks, across three manuals
& pedal

GREAT ORGAN (4” wind)

16’ Double Open Diapason (tin in façade)

8’ First Open Diapason (tin in façade)

8’ Second Open Diapason (1–8 from 16’)

8’ Viola da Gamba (tin)

8’ Claribel Flute (open wood)

4’ Principal

4’ Spire Flute

22/3’ Twelfth

2’ Fifteenth

13/5’ Seventeenth

2’ Fourniture V

V Cornet (tenor C, preparation)

8’ Trumpet (preparation)

8’ Tromba (Ped)

4’ Clarion (from Tromba)

8’ Major Tuba (in case)

8’ Tuba Solo (melody coupler function)

8’ Pontifical Trumpets (polished copper, horizontal,
over entry door)

SWELL (4” wind)

8’ Violin Diapason

8’ Stopped Diapason (wood)

8’ Salicional

8’ Voix Celeste

4’ Principal

4’ Harmonic Flute

2’ Octavin

22/3’ Full Mixture V

16’ Bassoon (full length)

8’ Trompette

8’ Oboe

4’ Clarion

Tremulant

8’ Major Tuba (Ch)

8’ Pontifical Trumpets

CHOIR ORGAN (4” wind)

16’ Lieblich Gedeckt

8’ English Diapason

8’ Flûte à Bibéron

8’ Flute Cœlestis (doubled open wood)

4’ Principal

4’ Suabe Flute (open wood)

22/3’ Nazard

2’ Recorder

13/5’ Tierce

11/3’ Mixture IV

16’ English Horn (preparation)

8’ Clarinet

Tremulant

Cymbalstern

8’ Major Tuba (30” wind)

8’ Pontifical Trumpets (51/2” wind)

PROCESSIONAL ORGAN

(4” wind, housed in a case over the entry doors)

8’ Open Diapason (tin in façade)

4’ Principal

PEDAL (various pressures)

32’ Double Open Diapason (1–12 digital)

32’ Subbass (1–12 digital)

32’ Lieblich Gedeckt (1–12 digital)

16’ First Open Diapason (open wood)

16’ Second Open Diapason (Gt, tin-façade)

16’ Bourdon

16’ Lieblich Gedeckt (Ch)

8’ Principal (tin-façade)

8’ Bass Flute (ext 1st Open)

8’ Bourdon (ext 16’)

8’ Gedeckt Flute (Ch)

8’ Spire Flute (preparation)

4’ Choral Bass (ext 8’)

4’ Open Flute (ext yes">  8’ Bourdon)

32’ Contra Trombone (from 16’, wood)

16’ Trombone (wood)

16’ Bassoon (Sw)

8’ Trumpet (from 16’)

4’ Clarion (from 8’)

8’ Major Tuba (Gt)

8’ Pontifical Trumpets

The organ has a full set of inter- and intra-manual couplers. These have been omitted from this specification for brevity and ease of reading.

Dobson Pipe Organ Builders, Ltd., Lake City, Iowa
Church of St. Peter Claver,
West Hartford, Connecticut
Dobson Pipe Organ Builders, Lake City, Iowa, has completed its Op. 85 for the Church of St. Peter Claver in West Hartford, Connecticut. The parish, founded in 1966, erected a church in 1969 to the designs of John Riley of the firm of Russell, Gibson and von Dohlen of West Hartford. Peter Claver, a Jesuit priest, spent forty years in Cartagena, Colombia, in the early 1600s, ministering to slaves shipped there from Africa. To recall this service, the design of the church evokes the hold of a ship, an image familiar to slaves, with light being admitted from a latticed skylight above.
As originally built, St. Peter Claver was supplied with an electronic organ and wall-to-wall carpeting. But the organ project, undertaken in 2006 at the initiative of Tim Stella, St. Peter Claver Director of Music, and Ezequiel Menendez, Director of Music at the Cathedral of St. Joseph in Hartford, was part of a renewal of the church building, including enhancements such as a tile floor. The musicians, originally located at the front near the altar, were given a dedicated space at the rear of the church. While this proved advantageous in many ways, it required the organ to be placed under the lowest point of the ceiling, with the added vexation of two roof trusses passing through the space. Because the ceiling is low, the case design is a horizontal, rather than vertical, composition. The Great Prestant 8′, the organ’s single principal stop at 8′, wouldn’t fill the façade from side to side, so Lynn Dobson created groups of pipes that float in front of a neutral wooden screen. The organ case, made of white oak with a natural finish, is slightly folded in the middle like a book, making a very shallow V that fits gracefully into the corner and embraces the choir. The screen behind the horizontal wooden ribs is a muted blue, while the exposed pipes of the Pedal Bourdon 16′ are painted a burgundy color.
Though the organ budget was not large, the church renovations significantly improved the acoustic, greatly enhancing the effectiveness of the organ and all musical sounds created in that space. The stoplist provides all of the basics: a complete principal chorus on the Great, a lesser chorus capped by the principal-like Gemshorn on the Swell, a variety of flutes including the ingredients for a jeu de tierce on the Swell, a pair of strings, and a reed in each division. In addition to the normal unison couplers, there is a Swell to Great 16′ coupler, which greatly increases registrational possibilities. Principals, strings and reeds are made of 75% or 52% tin; flutes are made of 30% tin or poplar. The organ is voiced on 75 millimeters wind pressure, supplied by a blower within the organ case and regulated by a large weighted reservoir. Mechanical key and stop actions are provided for the manuals, and electric action for the two Pedal stops. The console is detached; built of white oak like the case, the console interior and music rack are trimmed with American black walnut and veneered with Carpathian elm burl.
The organ was dedicated in November 2007, and Ezequiel Menendez, assisted by his wife Mercedes Featherston, presented a dedicatory recital on October 20, 2008 that included works by Mendelssohn, Zipoli, Couperin, Hollins, Franck, Piazzolla, Ginastera and Bach.
—John Panning, Tonal Director
Dobson Pipe Organ Builders

GREAT – 58 notes
8′ Prestant
8′ Chimney Flute
4′ Octave
2′ Fifteenth
11⁄3′ Mixture IV
8′ Trumpet
Swell to Great 16′
Swell to Great 8′

SWELL – 58 notes (enclosed)
8′ Gedackt
8′ Salicional
8′ Celeste FF
4′ Principal
4′ Open Flute
22⁄3′ Nazard
2′ Gemshorn
13⁄5′ Tierce
8′ Oboe

PEDAL – 32 notes
16′ Subbass
8′ Bourdon (Subbass)
16′ Fagotto
8′ Trumpet (Fagotto)
Great to Pedal
Swell to Pedal

Tremulant (affects entire organ)