Cover feature

John-Paul Buzard Pipe Organ Builders, Champaign, Illinois

Maxwell Street Presbyterian Church, Lexington, Kentucky, Buzard 2009–2010 renovation

Hayes Barton United Methodist Church, Raleigh, North Carolina, Buzard Opus 39, June 2010

I am proud to showcase a recently completed new organ, and a renovation project successfully accomplished by our service and tonal departments, to give a glimpse into the depth of our firm, and the differing types of projects that we regularly and successfully undertake.
Some years back The Diapason featured a renovation project of ours at First Presbyterian Church, also in Lexington, Kentucky. Word of the success of this project quickly sped through the community, and we were contacted by Maxwell Street Presbyterian Church’s music director, Clif Cason, about the possibility of giving their 1963 Rieger tracker action organ a mechanical and tonal “going over.” He and the parishioners at Maxwell Street Church liked the transparency and vigor of the organ’s neo-Baroque style, but weren’t convinced of the inharmonic noise in the flue voicing, nor the unstable and thin-toned reeds. The organ exhibited mechanical symptoms which signaled that work was necessary, and we discovered that the organ was impossible to tune, or keep in tune.
All of us had a turn to inspect this organ: general manager Charles Eames, tonal director Brian Davis, service department director Keith Williams, service department foreman, David Brown, and I. We discovered that the pallets had been covered in a foam-rubber substance, which was becoming sticky and gooey. Additionally, the felt bushings in the keyboards and pedalboard had worn to a point at which the action was clattery. The organ leaked wind inordinately, especially where the pull-down wires exited the slider chests’ pallet boxes.
We re-covered the pallets with felt and leather. All the deteriorated leather purses at the pull-down wires were replaced with felt punchings held down by small lead weights. Keyboards and pedalboard were restored, tracker “combs” that had been removed were replaced, small “bleed” holes were drilled into the slider chests’ tables, and the action was re-hung and balanced properly. Since re-regulating the action and eliminating the flaws we found in our initial inspection, we have discovered that many of the steel needle-axles that act as a bearing for the actions’ squares have worn and will on occasion jump out of their bearing clevises. Replacement of these axles will be a future maintenance operation.
Tonally, the organ was not a happy instrument. Years of heavy cone tuning had done its damage, especially to the small mixture pipes in the organ. Tuning scrolls on façade pipes and the larger flue pipes on the chests had been rolled down too far, and could not tune flat enough. Throughout, the sound was noisy, with a disproportionate amount of speech articulation, scratchiness in the tone, and in many of the small mixture pipes, quick speech to the point of over-blowing an octave. The reeds’ resonators were too short to couple to the pitches that the reeds’ tongues were producing, contributing to a thin and unstable tone. We all concluded that the existing flue pipes could be physically restored and the voicing amended for a significantly improved musical result. However, the reed pipes needed to be replaced.
Our tonal director, Brian Davis, came to us from Visser-Rowland & Associates and was not only intimate with the techniques of flue-regulation voicing, but also significant achievements in neo-Baroque reed making that had been made by German reed pipe maker Roland Killinger in the late 1960s. These developments produced neo-Baroque reeds of excellent tone and tuning stability, even though voiced on very low wind pressures. Ironically, just as Mr. Killinger’s experiments began to produce results, the neo-Baroque trend ended, and few of these new reeds were ever made—until this project.
All of the organ’s pipes (except the largest wood pipes screwed onto the case sides) came back to our workshop for cleaning, repair, and re-voicing. The damage to the small pipes by heavy cone tuning was too significant to warrant restoration of the cone-tuning system, so we installed stainless steel tuning slides on the smaller pipes, and restored (in many instances replaced) the scrolls on the larger pipes. While we had the pipes out we also removed the toeboards to vacuum clean the chest tables and sliders, and to manufacture toeboard overlays and new racking for the new reeds. We observed that the organ used modern-style spring-loaded slider seals, except that from about middle “C” on up these sleeves were sealed with diaphragms of pneumatic leather—all of which were ripped and leaking. No wonder this organ could not be tuned, and no wonder former technicians simply bashed and bashed those poor little pipes sharper and sharper with their tuning cones—because they weren’t receiving enough wind, because of the leaking leather! New slider seals sans leather replaced the originals. Not surprisingly, now the organ can be tuned, and stays in tune.
In order to get as much sound from the relatively small-scaled 16′ Subbass pipes (stamped “Lieblich” by the way), the corrugated tubing connecting the toe holes on the chest to the toes of the pipes screwed onto the case was replaced with larger diameter tubing, and we installed “lifters” onto the pallets, so that the pedal action would be able to open the pallets farther.
There was a half-length 16′ Posaune in the Pedal, but it was of such small scale, producing no fundamental pitch, that we opted to place a nicely scaled 8′ Trompete in its place. Music director Clif Cason envisions a second phase of the project to install a new full-length 16′ Posaune in the back of the organ, and a Pedal 16′ Offenbass in additional cases alongside the existing instrument. This may be tied into a long-hoped-for chancel renovation and re-configuration project.
The re-installation of the organ took approximately two weeks, and tonal finishing occupied three weeks. The result is a phenomenally clean, clear, transparent, buoyant, musical sound. The reeds are full and round, the direct result of Roland Killinger’s research from the 1960s. This organ, and our rebuilt organ at First Presbyterian Church, will be featured in the AGO regional convention to be held next summer in Lexington.
It is possible to work faithfully in a style that may not be one’s own when renovating an existing instrument. But this takes complete subrogation of one’s self from the tonal and mechanical equation. Our firm has the depth and experience to successfully undertake such a project, while at the same time developing our own personal style of modern organbuilding. Many know that I’m a romantic at heart. One of my colleagues said to my son at the recent AGO convention (to paraphrase) “It’s because of your father, that we can build modern romantic organs.”
The new organ at Hayes Barton United Methodist Church in Raleigh, North Carolina came about because the wonderful people on the organ committee had a romantic and emotional reaction to our organs at All Saints Episcopal Church in Atlanta, Georgia, and Williamsburg Presbyterian Church in Williamsburg, Virginia. They asked their consultant, Keith Shafer, why they needed to listen to any other builders’ instruments after hearing ours, because they knew in their hearts that they had fallen in love. But they followed the consultant’s discipline, and hearing others confirmed their impression of heart. They had to have a Buzard organ in their church!
Their organ project was coupled with a tremendously successful sanctuary renovation project, in which the visual and acoustical environments were transformed into a dignified, lively and holy place of worship. Organist David Witt spent endless hours coordinating architects, contractors, and consultants. The interior designer was Terry Byrd Eason and the acoustician was Dana Kirkegaard.
Engineering this instrument of 43 stops and 52 ranks was one of the greatest physical challenges for executive vice-president Charles Eames (also a Visser-Rowland alumnus). Every inch of roof gable, every nook and cranny of former organ chambers, and a space above a newly developed sacristy became home for the instrument, all of which can easily be reached for maintenance and tuning.
The warmth and breadth of the tonal palette encompasses a dynamic and lively Principal chorus as the backbone of the instrument, as well as flute, string, and reed choruses. No two stops of the same class are identical, which translates into tremendous tonal variety. The organ can accompany a single small child, through a choir of 100. And, the improved acoustics coupled with our voicing allows one to feel the sound all around oneself, and that one is always supported in singing.
During our last week of tonal finishing in early June, son Stephen came down to Raleigh from his last summer at Westminster Choir College in Princeton, New Jersey, and played an impromptu concert for the members of the church’s building and organ committees. Playing for about half an hour, the clarity of the Principal choruses was highlighted, then the softer, suave voices in the Swell and Choir as well as the lyrical reeds; then the organ’s orchestral nature shone in the Willan Introduction, Passacaglia, and Fugue. All agreed that they never thought pipe organs could sound this way.
Yes, I am a romantic at heart, a professional of mind, perhaps a pragmatist and dreamer all rolled into one. But so is everyone else on my staff, and we would love nothing more than to be a part of your worshipping community, whether it involves building you a new pipe organ, or renovating an instrument you have, with which you want to fall in love again.
—John-Paul Buzard

Maxwell Street Presbyterian Church, Lexington, Kentucky
1963 Rieger Orgelbau, Austria, mechanical action, 21 stops, 30 ranks
2010 renovations John-Paul Buzard Pipe Organ Builders, Champaign, Illinois. Completed October 15, 2010

HAUPTWERK Manual I 55mm wind pressure
8′ Principal 61 pipes
8′ Röhrflöte 61 pipes
4′ Octave 61 pipes
II Sesquialter 122 pipes
2′ Blockflöte 61 pipes
11⁄3′ Mixtur V 305 pipes
16′ Röhrschalmei 61 pipes*
8′ Trompete 61 pipes*
II–I 8′

POSITIV Manual II
55mm wind pressure
8′ Holzgedeckt 61 pipes
4′ Principal 61 pipes
4′ Koppelflöte 61 pipes
2′ Octave 61 pipes
11⁄3′ Quint 61 pipes
2⁄3′ Scharff IV 244 pipes
8′ Krummhorn 61 pipes*
Tremulant

PEDAL 55mm wind pressure
16′ Offenbass (* prepared for)
16′ Subbass 44 pipes
8′ Octavbass 32 pipes
8′ Subbass 32 notes
4′ Gemshorn 32 pipes
2′ Rauschpfeiffe III 96 pipes
16′ Posaune (* prepared for)
8′ Trompete 32 pipes*
4′ Schalmei 32 pipes*
Tremulant
I–P 8′
II–P 8′
(* denotes new pipes)

John-Paul Buzard Pipe Organ Builders, Champaign, Illinois
Hayes Barton United Methodist Church, Raleigh, North Carolina
Three manuals, 43 stops, 52 ranks, electric-slider action
Completed June 2010

GREAT (4-inch wind pressure)
16′ Lieblich Gedeckt 61 pipes
8′ Open Diapason 61 pipes
polished tin in façade
8′ Viola da Gamba 61 pipes
8′ Flûte Harmonique 61 pipes
polished tin in façade
8′ Bourdon 61 pipes
4′ Principal 61 pipes
4′ Spire Flute 61 pipes
22⁄3′ Twelfth 61 pipes
2’ Fifteenth 61 pipes
11⁄3′ Mixture IV 244 pipes
8′ Trompete 68 pipes
(doubled flue trebles)
8′ Tromba (Pedal)
4′ Tromba Clarion (Pedal)
8′ Major Tuba (Choir)
Tuba Solo (melody coupler)
Tremulant
Cymbalstern 14 bells
Chimes (digital)
Great-Great 16-UO-4
Swell-Great 16-8-4
Choir-Great 16-8-4

SWELL (4-inch wind pressure)
16′ Gedeckt Pommer 43 pipes
(1–18 from Great)
8′ Violin Diapason 61 pipes
8′ Stopped Diapason 61 pipes
8′ Salicional 61 pipes
8′ Voix Celeste 61 pipes
8′ Flûte Cœlestis 86 pipes
(Ludwigtone)
4′ Principal 61 pipes
4′ Harmonic Flute 61 pipes
22⁄3′ Nazard 61 pipes
2′ Recorder 61 pipes
13⁄5′ Tierce 61 pipes
2′ Full Mixture IV 244 pipes
16′ Bassoon 85 pipes
8′ Trompette 68 pipes
(doubled flue trebles)
8′ Oboe 61 pipes
4′ Clarion (ext Bassoon)
8′ Major Tuba (Choir)
Tremulant
Chimes (digital)
Swell-Swell 16-UO-4

CHOIR (4-inch wind pressure, except as noted)
8′ English Open Diapason 61 pipes
8′ Flûte à Bibéron 61 pipes
8′ Dulciana 61 pipes
8′ Unda Maris 49 pipes
4′ Principal 61 pipes
4′ Block Flute 61 pipes
2′ Doublette 61 pipes
11⁄3′ Larigot 61 pipes
1′ Fourniture IV 244 pipes
8′ Clarinet 61 pipes
8′ Tromba (Pedal)
4′ Tromba Clarion (Pedal)
8′ Major Tuba 61 pipes
25 inch wind pressure
Tremulant
Chimes (digital)
Harp (digital)
Celesta (digital)
Choir-Choir 16-UO-4
Swell-Choir 16-8-4

PEDAL (4-inch wind pressure, except as noted)
32′ Double Open Diapason (digital)
32′ Subbass (digital)
32′ Lieblich Gedeckt (digital)
16′ Open Diapason 32 pipes
wood and metal in facade;
1–6 12-inch wind
16′ Bourdon 44 pipes
8′ Open Bass 44 pipes
polished tin in façade
8′ Principal 44 pipes
polished tin in façade
8′ Bourdon (ext)
8′ Violoncello 32 pipes
polished tin in façade
4′ Choral Bass (ext)
4′ Open Flute (ext)
16′ Trombone 85 pipes
7-inch wind pressure
16′ Bassoon (Swell)
8′ Trumpet (ext)
4′ Clarion (ext)
8′ Major Tuba (Choir)
Chimes (digital)
Great-Pedal 8-4
Swell-Pedal 8-4
Choir-Pedal 8-4

Photo credit: John-Paul Buzard

800/397-3103
www.Buzardorgans.com

John-Paul Buzard Pipe Organ Builders, Champaign, Illinois
Second Presbyterian Church,
Bloomington, Illinois, Opus 37
This instrument of 43 stops and 56 ranks is the 37th new organ built by Buzard Pipe Organ Builders of Champaign, Illinois. The Buzard firm had originally been selected as the church’s builder of choice in 1991, when plans were first developed to build a new sanctuary. In more recent years, when the original Victorian-era building was found to be structurally unsound, the desire to design and construct a new church building acquired a new sense of urgency. The decision to include a pipe organ in a very modern building in the context of a very modern ministry was not made lightly, nor easily. The wisdom of the church leadership held that worship styles both timeless and modern needed to be embraced wholeheartedly. The organbuilder and architect enjoyed an unusually collaborative and collegial relationship in the design of the entire building as well as the new instrument. The new sanctuary was completed in 2005, and the new organ arrived in June 2008, giving the construction dust plenty of time to settle. Although the room’s acoustics are more absorptive than we would have preferred, sound is heard evenly and in balance throughout the room.
The organ’s dramatic visual design is intended to be a stylized rendering in organ pipes of a Celtic cross. The background fields of Great and Pedal Diapason and Principal pipes are made of polished tin. The pipework elements of the cross itself are polished copper Pedal Principals and the horizontally mounted Festival Trumpets. The giant blocks of white oak that hold the Festival Trumpet pipes are clad in polished copper to emphasize the cross’s horizontal arms. The circle that binds the four arms of the cross together is a 16-foot diameter ring of Baltic birch, leafed in 24-karat red gold.
The instrument is housed in a solid white oak case standing three stories tall, 24 feet wide, 12 feet deep, flanked by walls that act as projection screens. The pipe shades are of basswood. Some of the small panels are enameled in indigo, which accent is also found in the stained glass windows. It is located on the axis of the church, above and behind the choral singers, to provide optimal projection of sound to the congregation and choir, and to be a living and integral participant in the worship service and the church’s interior design. A closed-circuit remotely operated television camera is mounted between and just behind two pedal façade pipes so that worshipers can see themselves projected on the screens(!).
The traditional portion of the church’s music program includes everything from children’s choirs through a large adult choir, small instrumental ensembles through full symphony orchestra performances. And of course the organ must support congregational singing and excel in its solo role. Therefore, this instrument had to exhibit an unusually wide dynamic range to accommodate musical needs of every size and type, but also the classic disposition that allows an organ to play the literature. The organ possesses a singularly noble and majestic tone quality. Each division is based upon sub-octave pitches, and the voicing is full and warm. The Great and Pedal feature First and Second Diapasons, and all the divisions include a wealth of warmly voiced 8′ stops to provide a rich variety of accompanimental colors at several volume levels. The design includes full couplers at 16′, 8′, Unison Off, and 4′ pitches for increased flexibility. Although the instrument sounds very big when everything is coupled, or when the high pressure Tubas or Festival Trumpets are used (excelling in its occasional role with a full symphony orchestra), the organ itself is not inherently loud—it can be as delicate as a child’s voice. Its sound fills the worship space gracefully, without having to yell to make its point.
Buzard organs have become known as exceptional accompanying organs, which is the primary use to which pipe organs are put in modern worship services. But, by virtue of an historically and nationalistically informed point of view, Buzard organs also musically render the entire solo repertory from early contrapuntal styles through the most modern symphonic transcriptions. Our principals have something to tell you. Their choruses are clear, but meaty. Flutes are singing and liquid, strings are warm and harmonically interesting. Chorus reeds add varying degrees of “clang” to their divisions: for example, the Swell 16′, 8′, and 4′ reed battery is of authentic French construction, the typically bright and bold sound tailored to this division’s classic musical character, whereas the Trompete on the Great is darker. Trombas appear on most of our Great organs as extensions of the Pedal Trombones (a Willis trick), which offers the organist two degrees of reed color and volume, depending upon the musical context. Our solo and pedal reeds take more of an orchestral approach: smooth, round, warm, and always interesting, whether soft or loud.
Our metal pipes are all made of high-tin-content pipe metal, planed and polished. The reeds use either this rich pipe metal or wood for their resonators. In this organ, the 32′ Contra Trombone resonators are white pine and full length down to low FFFF#. The wood flue pipes are made from poplar or mahogany with cherry mouths.
All Buzard organs employ slider and pallet windchests to eliminate long-term maintenance, and provide superior tonal blend and tuning stability. All Buzard organs employ wooden winding systems to reduce turbulence and noise, and schwimmer regulators at each slider chest to provide a steady wind supply.
The instrument was dedicated in public recitals by organist emerita Doris Hill, concert organist Ken Cowan, and Mr. Cowan’s student and the builder’s son, Stephen Buzard. A new CD featuring Stephen Buzard playing this organ will be released later this year on the Delos label.
—John-Paul Buzard

Buzard Opus 37
Second Presbyterian Church,
Bloomington, Illinois
43 straight speaking stops, 56 ranks,
3 stops prepared for future addition

GREAT (4-inch wind)
16′ Double Open Diapason (tin in façade)
8′ First Open Diapason (tin in façade)
8′ Second Open Diapason (1–8 from 16′)
8′ Viola da Gamba
8′ Claribel Flute (Melodia)
8′ Principal
4′ Spire Flute
22⁄3′ Twelfth
2′ Fifteenth
13⁄5′ Seventeenth (prepared)
2′ Fourniture V
2⁄3′ Sharp Mixture III
8′ Trompete
Cornet V (prepared)
Tremulant
8′ Trombas (Ped Trombone)
4′ Tromba Clarion (ext Trombas)
8′ Major Tuba (Ch)
8′ Tuba Solo melody coupler
8′ Festival Trumpets (horizontal
polished copper)

SWELL (4-inch wind)
8′ Open Diapason
8′ Stopped Diapason
8′ Salicional
8′ Voix Celeste
4′ Principal
4′ Harmonic Flute
2′ Octavin (harmonic)
22⁄3′ Full Mixture V
16′ Bassoon (full length)
8′ Trompette
8′ Oboe
4′ Clarion
Tremulant
Chimes (21 notes)
8′ Major Tuba (Ch)
8′ Festival Trumpets (Gt)

CHOIR (4-inch wind)
16′ Lieblich Gedeckt
8′ English Diapason
8′ Flûte à Bibéron
8′ Flûte Cœlestis II (Ludwigtone)
4′ Principal
4′ Suabe Flute (open wood)
22⁄3′ Nazard
2′ Recorder
13⁄5′ Tierce
11⁄3′ Mixture IV
16′ English Horn
8′ Clarinet
Tremulant
Cymbalstern
8′ Major Tuba (25 inches wind)
8′ Festival Trumpets (Gt)

PEDAL (various pressures)
32′ Double Open Diapason (digital)
32′ Subbass (digital)
32′ Lieblich Gedeckt (digital) (Ch)
16′ First Open Diapason (wood & metal)
16′ Second Open Diapason (Gt)
16′ Bourdon
16′ Lieblich Gedeckt (Ch)
8′ Principal (tin in façade)
8′ Open Bass (ext 16′ First Open)
8′ Bourdon (ext 16′ Bourdon)
8′ Violoncello (tapered)
4′ Choral Bass (ext 8′ Open Bass)
4′ Open Flute (ext 16′ Bourdon)
22⁄3′ Mixture IV (prepared)
32′ Contra Trombone (wood)
16′ Trombone (ext 32′, wood)
16′ Bassoon (Sw)
8′ Trumpet (ext Trombone)
4′ Clarion (ext Trombone)
8′ Major Tuba (Ch)
8′ Festival Trumpets (Gt)

Cover

Buzard Pipe
Organ Builders, Champaign, Illinois

Opus 29,
completed November, 2003

All Saints
Episcopal Church, Atlanta, Georgia

Some years ago I was contacted about a new organ for All Saints Episcopal
Church by the assistant organist, Jefferson McConnaughey. We seemed to be
speaking the same language concerning how we thought organs should sound, and I
was eager to meet him, music directors Ray and Elizabeth Chenault, and to visit
the church. Our conversations were put on hold while the parish called a new
rector and undertook other projects. At the time we were blessed with
commissions to build the organ at St. Paul's Episcopal Cathedral, Oklahoma
City, and large instruments for Glenview Community Church (III/71) and Holy
Family Catholic Church of Rockford, Illinois (III/56).

A few years went by, and I was invited to visit the church. Judging from the
size of the instrument under discussion, I expected to enter a huge space.
Instead, the church was more modest than vast, the acoustic more understated
than generous. At first blush, it seemed that 40 stops could have adequately
met their needs. But, no real lady ever gives up all her secrets at once, and
so I patiently looked and listened.

I listened to their former instrument while walking around the room, and
observed the acoustical phenomena under which the musicians had been laboring
for so long. The organ, although installed in the chancel in relatively close
proximity to the congregation, diminished drastically in volume in the nave. I
concluded that a part of the organ had to be installed in the body of the
church, to support singing and "pull" the sound out of the main part
of the organ installed in the chancel. Additionally, sound generated in the
nave lost its energy quickly; sound simply didn't travel well without becoming
garbled.

The musicians wanted to be able to properly register an organ to
"text-paint" Anglican Chant, choral anthems and ceremonial music in
the Anglican musical tradition. They needed a wide variety of accompanimental
tone colors at every dynamic level so that the organ could always support the
singers, even at pianissimo volume levels. It was equally important that the
organ musically render the great body of organ literature, even that of the
French Baroque school, of which Mr. McConnaughey seemed quite fond. And, the
Chenaults are duo organists; the literature which has been (and has yet to be)
commissioned for them had to be accommodated. This requires a large organ, as
coloristic stops outside the component voices for the essential choruses had to
be included and integrated into the design. Fortunately, these stops were never
in competition for space or funding, nor were our classic concepts of the
hierarchical scaling of divisions within the instrument ever compromised. Some
specific organs were studied: The Temple Church, London; King's College,
Cambridge; and St. Paul's Cathedral, London.

There is a beautiful chapel behind the Epistle side choir stalls, at 90
degrees to the axis of the church, which also serves as an overflow room on
Sundays. Worshippers there were relegated to viewing services on a small
closed-circuit TV, and could not participate in the hymn-singing because, being
outside the body of the church, they couldn't hear the organ. If the new organ
were to address and meet all the musical and acoustical requirements of the
church, then the chapel also needed to have some pipes in it, so that those
seated there could feel a part of the worshiping community.

All of these requirements were brought to bear upon a single instrument. Yes,
I agreed, this instrument has to be large--very large. Even if the room seats
only 550 souls, the musical and physical requirements dictated an organ of a
size which one might initially think out of proportion.

The position and installation of the new Main Organ was relatively
straightforward. The Great, Swell, Choir, Tuba, and Pedal would have to be
installed in the chancel, in an enlarged version of their existing chamber,
plus spaces created by cantilevering steel platforms into the chancel space on
both Epistle and Gospel sides.

The antiphonal division, a romantic Solo Organ including a Diapason Chorus
which mirrors the Great, had to be installed in the nave. But there was no
floor space for cases, no desire to see columns, and windows everywhere, many
of them signed by Louis Comfort Tiffany. By clever engineering of the diatonic
windchest layouts (which we had first used at St. Paul's Cathedral in Oklahoma
City) we were able to tuck the Solo Organ cases up in the rafters of the church
above the narthex, on either side of a central great window. By creative use of
perspective, we were able to engineer the location of the supporting steel
platforms so that they wouldn't block the view of the Tiffany windows in the
side aisles, yet give us sufficient height for the pipes inside the cases.

As conversations concerning the tonal design took shape, Ray, Elizabeth, and
Jeff fell in love with our tonal style which, while embracing eclecticism, has
its own unique personality. They visited both our large organs, and Jeff
actually played Sunday services on our Opus 7 organ at The Chapel of St. John
the Divine in my wife Linda's stead. The All Saints organ is a very logical
outgrowth of our style as practiced in our smaller organs, and as our two
larger organs have led us. The humble beginnings of Opus 7 at the Chapel, in
which we made 29 stops into a cathedral organ, can be seen all over this much
larger organ. Well-informed national and historical inspirations are
distributed throughout, so that the whole is at unity with itself. No German
Hauptwerk, French Récit or English Chair Organs for us. For example the
Great includes the mature English practice of 8' First & Second Open
Diapasons, married nicely to the French Fonds d'Orgue. A voluptuous Full English
Swell has continental fire by virtue of the authentic (but modified) French
reed battery, but the lyrical soft solo reed is a plaintive English Oboe. No
quirky nomenclature either. Although rooted in 19th-century English practice of
"Diapason, Principal, Twelfth, Fifteenth," etc., the stops in our
organs are what they say they are. If the Swell reed is spelled
"Trompette," you can be assured that you will hear a Trumpet with
French shallots and pipe construction.

The Great is based upon a 16' Double Open Diapason of tin which stands
proudly in the Gospel side case along with the rest of the division. A complete
Diapason chorus through Mixture, flutes at 8' & 4', and a Viola da Gamba
make up the flue work, and the reeds are Trombas, brought up to the manuals from
the Pedal Trombone. The Mixture breaks at octaves, rather than at fifth
intervals. In this way, one doesn't hear alternating unison and fifths playing
as the top rank, and the breaks are virtually unheard.

The Great also incorporates an harmonic corroborating stop which was more at
home in English and American concert organs of the early part of the last
century. Our four-rank Harmonic Mixture has in it a unison, a quint, a tierce,
and a flat-seventh. These are all the harmonics present in Tromba class reeds,
which are on the Great at 8' and 4' pitches. We originally included the
Harmonic Mixture as a way to prevent the dark Trombas from covering the
brightness of the mixture work in full organ, but have found that when used
sans Trombas, the ancient flavor of 18th-century Dutch organs is perceived in
an uncanny way. One could even imagine the wind to be unsteady--but of course
it's not!

The Solo has a Diapason Chorus nearly mirroring the Great, and despite its
distance from the Main Organ, it can exactly balance the Great Plenum in
certain contexts. The Solo contains a pair of E. M. Skinner-inspired Gambas,
the celesting rank in the case across the church from its unison pair. Now
that's a Celeste! The Flügel Horn, while a lyrical romantic solo reed, has
just enough harmonic interest to function beautifully as a chorus reed. The
Bassett Horn is certainly at home playing obbligato parts in Elgar, but has
just enough Cromorne in it to play Daquin with a French nose in the air.

One can use the Choir in a classic context, as a Positiv when a lighter foil
to the Great is desired. But this division is the real choral accompanying
workhorse. It's one of the most elegant, light, but profound Choir divisions we
have created. The Choir features a flute chorus from 16' up, and a proper
Diapason chorus complete with a four-rank quint mixture, a fifth interval
higher than the Great. But the luxurious feature in this day and age is our
Dulciana Chorus, which includes a three-rank mixture in which the 4' enters
early on at tenor C. Our Dulcianas are truly small Diapasons, and there is
nothing like the effect of accompanying voices with Diapason color, but at such
a soft volume. The Dulciana Mixture has many uses in coloring and painting
texts, 90% of which I would never have envisioned. Our Cornopeans are
small-scaled, but fundamental Trumpets as the original prototypes were, not the
horn-like Cornopeans one would otherwise love to hate. The Clarinet is truly of
English style, and the English Horn is orchestral in color with enough body to
be the foundation of the Choir reed battery, yet enough jazz in the color to
differentiate itself from the more fundamental Swell English Oboe.

The Chapel Organ includes a small-scaled Diapason Chorus at 8' and 4' to
lead the hymn-singing, and an 8' Aeoline and Vox Angelica. These very, very
soft string-toned stops allow the worshippers there to feel connected, and also
provide a powerfully effective pianissimo "wrap-around" effect as the
softest sounds concluding a smooth decrescendo. These little strings can just
be barely heard in the nave as the expression box closes on the Solo Flute
Cœlestis. When they play alone, they are literally in another room, off in
the distance.

In the All Saints organ, the Great, Swell, Choir, Solo, and a portion of the
Pedal divisions play upon 4 inches of wind pressure. The Trombones and Trombas
play upon 7 inches of wind, the Solo Festival Trumpets on 6 inches, and the
Major Tuba plays upon 20 inches of wind. The Tuba is housed in its own
expression box, and the organist can easily select which expression shoe may be
used to operate the Tuba's expression (or whether it is to remain open) by a
simple rotary switch. We aim to expand the color and dynamic range of the pipe
organ, while keeping the console controls simple and straightforward.

Before I was selected as their builder, Ray, Elizabeth, and Jeff charged me
to design the perfect instrument for all their requirements, and they would
undertake the responsibility of presenting this plan to the organ committee to
get their reaction, and see if the instrument would have to suffer at the hands
of "value engineers." Although my past experience made me somewhat
timid about presenting such a large (expensive) instrument as part of a
selection competition, we arrived at the specification of 63 straight speaking
stops, 87 ranks of pipes (5229 pipes overall), in five free-standing cases
throughout their church.

I will never forget the evening of a crucial organ committee meeting when I
received an excited telephone call from Ray. The musicians presented the
proposal and the room fell silent. People on the committee asked questions to
the effect: "Now, do all three of you musicians agree on this builder? Do
all three of you agree with each other in every respect to this instrument?"
When the answer was an emphatic yes, a committee member said: "How many
times do musicians agree with each other about anything, let alone every of the
many thousands of details in this organ's design!? This is what we need for All
Saints, and we need John-Paul to build it for us." A member of the
committee, Sarah Kennedy, later wrote a check for the entire project, in loving
memory and in honor of her family, The Kenans.

The organs' visual designs were developed during August and September of
2001. The first draft of the Chapel Organ's design was revised to be more in
keeping with the modern nature of the chapel (and less like King's College,
Cambridge). The Main Organ and the Solo Organs were built according to my first
pen-and-ink renderings.

All of my design drawings are executed by hand. The discipline of cleaning
the drafting table and truing the parallel bars and 90-degree instruments
contributes to clearing my mind of everything except what I need to think about
for the organ on the blank piece of paper.

It is always my goal to design organ cases which appear as though they had
always been in the church. The All Saints cases use shapes and colors found
throughout the room, and mirror the restrained nature of the Victorian Gothic
design. But the cases become vivid, exciting, and dramatic by incorporation of
the fabulous red enamel and gold leaf adorning the church's clerestory. The
inclusion of the red gave me license to add contracting pieces of red-stained
Honduras mahogany in the stained white oak cases. The soaring nature of the
Solo Organs, as their lines ascend while moving toward the great window, seemed
to cry out for heraldic angels, announcing the Great Day of Judgment on
gold-leafed trumpets. Thanks to parishioner David Foerster for making these
possible.

All of us will remember exactly where we were on 9/11. I was at the drafting
table finishing the designs for the Main Organ cases. I had penciled the
drawing the day before and was preparing to ink the drawing when I heard the
news reports. My entire staff came up to the drafting room and we all went to
the conference area where a small television showed us the horrors unfold as
the second airliner smashed into the second building. As we heard a large
airplane overhead, being sent to land at our local airport, I was asked if we
were going to close for the day. I said, no. We had to go about our task of
making beautiful things, especially in light of the ugliness that visited
itself on our country that day. If we wanted to take time off individually to
mourn our country's losses, go with my blessing, but the doors would remain
open and I would continue to draw a beautiful pair of pipe organ cases.

I set to cleaning out my India ink pens, and put on a CD of The English
Anthem II from St. Paul's Cathedral,
London.

Oh Lord, look down from heaven, and behold the habitation
of Thy holiness and of Thy glory: Where is Thy zeal and Thy strength? Thy
mercies towards me, are they restrained?

My deepest thanks to the musicians at All Saints Church, everyone on the
organ committee, Greg Kellison, chairman; Paul Elliott, the rector; David
Foerster, and Sarah Kennedy for selecting me and my firm for this tremendous
commission.

My overwhelming gratitude goes to the members of my staff whose hard work
and dedication made such an excellent instrument so sublime: Charles Eames,
executive vice president, general manager and chief engineer; Brian K. Davis,
associate tonal director; Keith Williams, service department director; Shayne
Tippett, shop manager; Jay Salmon, office manager; Evan Rench, pipe maker,
voicer; Steve Downes, tonal assistant; C. Robert Leach, cabinetmaker; Stuart
Martin, cabinetmaker; Kenneth McCabe, winding systems; Ray Wiggs, consoles,
windchests; Robert Ference, service technician; Stuart Weber, service
technician; Jonathan Borchardt, service technician; JoAnne Hutchcraft Rench,
receptionist.

--John-Paul Buzard

GREAT (4-inch wind pressure)

Manual II - unenclosed pipework

16' Double Open Diapason

8' First Open Diapason

8' Second Open Diapason (ext 16')

8' Viola da Gamba

8' Harmonic Flute

8' Bourdon

4' Principal

4' Spire Flute

22/3' Twelfth

2' Fifteenth

2' Fourniture V

13/5' Harmonic Mixture IV

16' Double Trumpet

8' Trombas (ext Ped)

4' Clarion (ext Ped)

Tremulant

Chimes

8' Major Tuba (20" wind)

8' Tuba Solo (melody coupler)

8' Fanfare Trumpets (Solo)

SWELL (4-inch wind pressure)

Manual III - enclosed and expressive

8' Open Diapason

8' Stopped Diapason

8' Salicional

8' Voix Celeste

4' Principal

4' Harmonic Flute

22/3' Nazard

2' Flageolet

13/5' Tierce

22/3' Full Mixture V

16' Bassoon

8' Trompette

8' Oboe

8' Vox Humana

4' Clarion (ext 16')

Tremulant

8' Major Tuba (Gt)

8' Fanfare Trumpets (Solo)

CHOIR (4-inch wind pressure)

Manual I - enclosed and expressive

16' Lieblich Gedeckt (wood)

8' English Open Diapason

8' Flûte à Bibéron

8' Gedeckt Flute (ext 16')

8' Dulciana

8' Unda Maris

4' Principal

4' Koppel Flute

2' Recorder

2' Mixture III–IV (Dulcianas)

11/3' Fourniture IV

Sesquialtera II (22/3' & 13/5')

16' English Horn

8' Cornopean

8' Clarinet

Tremulant

Cymbalstern (14 bells)

8' Major Tuba (Gt)

8' Fanfare Trumpets (Solo)

Harp (digital)

Celesta (digital)

ANTIPHONAL SOLO (4- & 51/2-inch wind)

Manual IV - in twin cases over the narthex (expressive)

8' Open Diapason

8' Viola da Gamba

8' Gamba Celeste (CC)

8' Melodia

8' Flute Cœlestis II (Ludwigtone)

4' Principal

4' Flûte d'Amour

2' Doublette

11/3' Mixture IV

8' Flügel Horn

8' Corno di Bassetto

Tremulant

Cymbalstern (8 bells)

Chimes (Gt)

8' Fanfare Trumpets

8' Major Tuba (Gt)

Harp (digital)

Celesta (digital)

PEDAL (various wind pressures)

32' Double Open Diapason (digital)

32' Subbass (digital)

32' Lieblich Gedeckt (Ch, digital)

16' First Open Diapason

16' Second Open Diapason (Gt)

16' Bourdon

16' Lieblich Gedeckt (Ch)

8' Principal

8' Bass Flute (ext 16' Bourdon)

8' Gedeckt Flute (ext 16' Lieblich)

4' Choral Bass

4' Open Flute (ext 16' Bourdon)

22/3' Mixture IV

32' Contra Trombone (wood)

16' Trombone (wood, ext 32')

16' Double Trumpet (Gt)

16' Bassoon (Sw)

8' Trumpet (ext 16')

4' Clarion (Sw)

8' Major Tuba (Gt)

8' Fanfare Trumpets (Solo)

CHAPEL (4-inch wind, floating)

8' Open Diapason

8' Aeoline

8' Vox Angelica (tc)

4' Principal

Chapel on Great

Chapel on Swell

Chapel on Choir

Chapel on Solo

Chapel on Pedal

Intraddivisional couplers

Gt/Gt 16-UO-4

Sw/Sw 16-UO-4

Ch/Ch 16-UO-4

Solo/Solo 16-UO-4

Interdivisional couplers

Gt/Ped 8, 4

Sw/Ped 8, 4

Ch/Ped 8, 4

Solo/Ped 8, 4

Sw/Gt 16, 8, 4

Ch/Gt 16, 8, 4

Solo/Gt 16, 8, 4

Sw/Ch 16, 8, 4

Solo/Ch 16, 8, 4

Pedal Stops to Divisional Pistons

The Wicks Organ Company, Highland,
Illinois has built a new organ for the Barrington United Methodist Church,
Barrington, Illinois. In 1999 the church building was destroyed by fire. Their
losses included a 41-rank Möller pipe organ, which had been rebuilt as
recently as 1988. As planning for their new building began, the search for a
new pipe organ started. The church’s demands for their new organ were
that it had to be a great congregational organ, but also able to perform for
recitals as well. The sanctuary was to be a top-notch performance facility as
well as a place of worship. The church desired an organ of 3 manuals and 5
divisions, including an antiphonal. Each division was to have a principal
chorus, and the foundations of the Great organ were to be exposed.

The church committee heard many styles of instruments built by Wicks over
the last seven decades. This included, a North German neo-Baroque style
instrument, a symphonic organ scaled and designed by Henry V. Willis, an
American Classic, and an Aeolian instrument from the 1920s that had been
rebuilt by the Wicks Organ Company in conjunction with Mr. Madison Lindsey. The
service playing abilities of each instrument were demonstrated to the
committee, and they identified and found themselves drawn to the
English/symphonic style of the rebuilt Aeolian instrument. The organ committee
chose Wicks over several other builders after hearing several new Wicks
installations and the company ‘s recent success in exactly this style of
instrument.

The completed organ is described as an English service organ with orchestral
capabilities. The instrument is able to not only provide a seamless crescendo
from ppp to fff, but can do it with flair. In addition to service music, the
organ is able to perform every possible type of organ literature from the
Renaissance to the present. It is also able to realize orchestral
transcriptions with great skill, thanks to the presence of many orchestral solo
stops in each division, blending choruses, and 2-inch thick beveled and overlapping
felted shades. The completed organ consists of 24 ranks of pipes and 25 digital
voices. The Wicks design team pre-engineered space to accommodate real pipe
ranks to replace these voices. The Swell is on 7 inches of wind, the Pedal 10
inches; the Choir and Great are on 6 inches, with the exception of the
Clarinet, English Horn, and Tuba in the choir, which are all on 10 inches.

The solo reeds of this organ are of a unique style, derived from the
Willis/Wicks style reeds used in many Wicks organs over the decades, married to
the traditional ideas of Skinner solo reeds. The end results were clear,
smooth, stops of unique color and great versatility throughout the compass. The
greatest asset to the organ is the lively acoustical environment of the sanctuary.
The collaboration of the building committee, acousticians Kirkegaard &
Associates of Chicago, and the Wicks Organ Company have resulted in a
beautiful, successful combination of organ and room.

The console is drawknob style with 45-degree side jambs, a glass music rack,
and P&S keys with ivory resin naturals and ebony sharps. The drawknobs are
made of polished hardwood. Made of red oak, the interior is very light and the
exterior is stained to match the woodwork of the chancel furnishings. The console
features a tilt tab that allows the digital Tuba and Festival Trumpet to
emanate from the antiphonal division located in the rear of the church instead
of their native divisions. The console also has a Manual I/II transfer for
French literature.

Installation of Opus 6412 began in August of 2003, and an initial tonal
finishing and adjustment of digital voices took place in early September. After
the church’s dedication, Wicks tonal director Dr. William Hamner and reed
voicer Greg Caldwell completed an entire tonal finishing.

--Brent Johnson

Great (exposed)

16’ Violone*

8’ First Open Diapason

8’ Second Open Diapason

8’ Violoncello

8’ Harmonic Flute (Ch)

4’ Principal

4’ Flute Octaviante

2’ Fifteenth

IV Full Mixture

8’ Chorus Tuba (Ch)

8’ Festival Trumpet* (Ant)

8’ Tuba Mirabilis* (Ant)

Chimes* (Ant)

Swell (expressive)

16’ Minor Bourdon*

8’ Open Diapason

8’ Stopped Diapason*

8’ Viola*

8’ Viola Celeste*

8’ Flauto Dolce*

8’ Flute Celeste*

4’ Octave Diapason

4’ Triangular Flute*

22/3’ Nazard*

2’ Recorder*

13/5’ Tierce*

IV Plein Jeu

16’ Waldhorn*

8’ Cornopean

8’ Oboe*

4’ Clarion

8’ Festival Trumpet* (Ant)

8’ Tuba Mirabilis* (Ant)

Tremolo

Choir (expressive)

8’ Geigen (1-12*)

8’ Concert Flute

8’ Dolcan*

8’ Dolcan Celeste*

4’ Octave Geigen

4’ Transverse Flute

2’ Harmonic Piccolo

16’ Bass Clarinet

8’ Clarinet

8’ English Horn

8’ French Horn*

8’ Festival Trumpet* (Ant)

8’ Tuba Mirabilis* (Ant)

8’ Chorus Tuba

Tremolo

Harp*

Antiphonal (unenclosed - floating) (prepared)

8’ Festival Trumpet*

8’ Tuba Mirabilis*

Chimes*

Antiphonal Pedal (prepared)

Pedal

32’ Contre Bourdon*

16’ Open Wood

16’ Major Bourdon

16’ Violone* (Gt)

16’ Minor Bourdon* (Sw)

8’ Principal

8’ Flute

8’ Stopped Flute

4’ Octave

4’ Harmonic Flute (Gt)

32’ Ophicleide*

16’ Trombone (1–12*)

16’ Waldhorn (Sw)

8’ Tromba

8’ Trumpet (Sw)

4’ Oboe (Sw)

7-bell zimbelstern

*= Digital Voices

John-Paul Buzard Pipe Organ Builders, Champaign, Illinois, Opus 34

Mt. Pleasant Lutheran Church (ELCA), Racine, Wisconsin

From the designer and builder

Did you know that the Jetsons are parishioners of Mt. Pleasant Lutheran Church, Racine, Wisconsin? You know them: George, Jane (his wife), daughter Judy, and his boy, Elroy. Outside the world of futuristic fiction, they must have had an influence in the design of this church building, which is locally known as “The Space Ship Church.” Built in 1975, it is a dish with an inverted saucer as its roof; large plate glass windows surround its perimeter, filling in the space at which the two join.

This building’s unique shape determines how it is accessed and used—functionally and liturgically. Ahead of its time in terms of accessibility, upon entering at ground level, one enters the lower level fellowship areas and upper level worship area by a series of switch-back ramps that wind around the building’s diameter. Liturgically, this is a church in “three-quarter round,” which presents its own challenges for communion and processional traffic flow.

The building’s shape also determines its acoustical environment, and therefore the limits of a pipe organ’s physical and tonal design. Consultant Scott Riedel guided the church in improving the acoustics and creating a better area for music-making, by altering the shape of the walls facing the congregation, filling in gaps between ceiling beams, and replacing the carpeting in the choir’s seating area with hardwood flooring. And, in fact, sound is now heard more clearly and evenly through the room, especially in the outer ring of seating at the edge of the room’s diameter. But, the remaining carpet and pew coverings do their work too well, absorbing bass frequencies.

We were able to observe this phenomenon clearly before the church’s former organ was removed. The 16¢ pedal sounds were weak in the church, but in the lower level fellowship hall, the tone boomed to overtake normal conversation.

The organ chamber, while perfectly sited across the front of the worship area, is horizontal in nature, with a maximum ceiling height of 14'. Congregational seating comes to within four feet of the organ’s left side; the choral singers are about eight feet from the right side. The wide layout, and very present location of the organ, demanded that the design be practical, and required a very gentle touch in its scaling and voicing. Since the pipes could not be elevated above the congregation’s heads, the sound is produced directly at the level of people’s ears, requiring very refined voicing. The enclosed accompanimental divisions of the organ needed to be located to the right, nearer the choir, which meant that the Great needed to be on the left. People on the left side of the organ would be only four feet away from the Great Mixture. Oh, yes, there were also four steel roof support columns in the organ chamber, which could not be moved, and had to be worked around.

Those of you who have followed our work, or played our instruments, know that our organs have a smooth, warm, pervading, and significantly grand tone. They can be bright when they need to be, but the various stops are not inherently so. (The last thing we want to do is voice the high pitches in the mixtures to be bright!) Our organs are not crowned by high-pitched mixture-work (as in neo-classic organs), but by the heroic blend that results from mixtures and reeds singing together, reinforcing unison pitch. In the case of this church, we needed to fill the entire building (basement included) with bass frequencies, and gradually decrease the intensity of tone as the pitches rose, in order to have the organ sound smooth, balanced in the tonal spectrum, and consonant with our artistic style. To have achieved the balance it has—whether one is sitting next to the Great Mixture, or in the outside ring—is a testament to the organ’s solid construction, painstaking attention to scaling, and countless hours of listening and adjusting the sounds in the church. Our head voicer, Brian Davis, was promoted to the position of tonal director as a result of this organ’s success in the face of such overwhelming challenges.

The visual design’s “prime directives” were to bring order to random asymmetry, lead the eye toward the center of the worship area, emphasize what little verticality the space actually has, and give a dignified prominence to a steel sculpture in front of the organ—the base of the church’s three-bladed steeple, which pierces the roof and ascends to a needle point in the sky.

The three arms of the steeple are of unequal width, connected by horizontal welded rods, and form a sculpture in the nature of a cross. Original descriptions of the sculpture allude to the Trinitarian symbolism of its three blades. The organ chamber is located immediately behind the sculpture, the center portion curved in the outline of the stone font, the sides on a slightly reverse curve as the chamber returns to the side walls. Aside from the planned asymmetry of the steel sculpture, the exact dimensions and precise placement of the organ chamber behind the sculpture could not be ascertained until the old organ was removed and the chamber developed by moving offices and closets previously flanking the former instrument. The chamber space itself was asymmetrical as registered to the centrally located sculpture.

We decided to design the organ’s façade in three sections, not only to emphasize the Trinitarian symbolism, but to give us some practical constructional flexibility in reconciling the many dimensional variables. Even though everything was accurately constructed in the shop to careful measurements taken once the organ chamber was constructed, we still needed to do more woodworking on-site than we would have liked, or than other situations have ever required.

The center section, being behind the flat-black steel sculpture, needed some visual grounding, but not heaviness. The former organ was basically dark, with lots of black grille-cloth, which made the steel sculpture disappear. We therefore displayed the centrally located large wood pipes in a light, natural finish in the center section, with the horizontal bright polished copper reed resonators wrapping themselves around the sculpture from above and behind. This central display is symmetrical, and acts as a perfect backdrop to gently soften the tension created by the wide-versus-narrow blades of the sculpture in front. The low octave of the 8¢ Pedal Principal flanks this display of the wood pipes, the pipes being mounted on toeboards that follow the curve of the font, to act as a transition to the façade’s side elements.

In order to provide motion, rhythm, and verticality to this horizontal instrument, the left and right sides feature the largest of the polished tin Principal pipes, mounted on casework with a toeboard “sill” lower than that of the center section. The façade pipes’ feet are significantly lower than the windchests in the organ, so we had to hide the chests and reservoirs behind them with black felt to eliminate potential visual confusion. The pipes on the outside edges are supported by arched toeboards, rising above the façade’s sill (or impost if this were an organ case), which we enameled blue to relate to other colors in the room. The largest Pedal Principal pipes we could fit in the façade are from 16¢ FFF, which sit on the floor, to break the horizontal line of the sill and challenge the height of the central steel sculpture. As the compass of this stop ascends, the smaller pipes are racked up on the sill, but the mouth line forms one continuous rising arch, leading the eye inward. Subtle touches of pipe spacing from the edges of the upright casework members were added to subtly influence one’s viewing of the “symmetrically asymmetrical organ.”

The tonal design of this instrument is fairly typical of what we do, with the exception of the four-stop Solo Organ, which is at home on the bottom manual keyboard. The Great, Swell, and Pedal are full and well developed, consonant with our style. The Solo offers some evocative coloristic sounds and the flexibility of a third keyboard in a situation in which there was neither room nor money for a full Choir Organ. Usually our organs’ solo reeds are Tubas. But, in this close acoustic, we were extremely concerned that the high volume, located so close to the listeners, would drive them all out onto Green Bay Road and us out of town on a rail! We therefore opted to make these Trombas, on lower pressure with slightly more open shallots for a relatively dark tone, but at a solo volume in balance with the rest of the organ. The Great 8' Trumpet is truly a luxury. This Trumpet is a beautifully blending chorus reed and also very useful for solo work. The Swell reed battery, though, is what’s worth writing home about! Here’s the power in the organ, beautifully tailored for its uses in a wide variety of contexts, but it is never too loud in the room. The Swell 16' Bassoon, which plays in the Pedal as well, perfectly balances not only the Swell battery, but also the Great full chorus for those many times when it is used as a “pointed” pedal reed and the darker, heavier Trombone would be too much.

It has been a pleasure to work with the people of Mt. Pleasant Lutheran Church, and consultant Scott Riedel, on this new instrument. Pastor Stephen Samuelson, music director Joshua Brown, and the organ committee fell in love with our instruments after hearing the organ we built at St. David’s Episcopal Church, Glenview, Illinois. Their vision for how the new organ would transform their unique worship space was inspiring. It was our privilege to be given the challenges and create something truly beautiful.

—John-Paul Buzard



From the organist and director of music

Like any good Lutheran, I must start with a confession. Five years ago, when I pulled up to Mt. Pleasant Lutheran Church for my first interview, I thought “Who designed this thing, Frank Lloyd Wrong? It embodies disappointing American church architecture with its wide squat room, plenty of carpet and more wasted space than the inside of an SUV!”

Fortunately, like any good Lutheran, I put my trust in God’s abiding grace, and returned to Mt. Pleasant as their organist and director of music to discover the beauty of this building. A ribbon of windows keeps the outside world in plain sight, and the roof line surrounds the building with a crown of thorns. The triune tower rises up from the baptismal font, punctuating this architectural statement, which has served as the church’s very best evangelism tool since its completion 30 years ago!

The church’s former small organ had been assembled in an ad hoc manner through the years, and suffered from the oppressive acoustical environment and poor chamber layout. With the able guidance of Scott Riedel and Associates, the church crafted a plan to remodel the sanctuary, double its reverberation time, and replace the aging organ. The organ committee considered many fine builders. John-Paul Buzard’s warmth of tone, quality of workmanship, and, to quote the Senior Pastor Stephen Samuelson, “bang for the buck,” all contributed to the church’s final selection of his firm.

This unique American church required an equally unique American organbuilder. John-Paul Buzard and his team tackled the church’s twin challenges of odd architecture and unforgiving acoustics with great aplomb. In the process they demonstrated that the best organbuilders, particularly for American churches, need a flexible approach to fit a wide range of applications. From high gothic architecture with grand acoustics to restrained “prairie style” architecture with limited acoustics, John-Paul Buzard has adapted and delivered stunning results while maintaining his tonal style and uncompromising quality.

Opus 34, the result of three years’ careful planning and execution, has both matched and enhanced the sanctuary’s architectural style. More importantly, it has brought an entirely new dynamic to the worship life of the congregation. With a tonal scheme based on a wide array of 8¢ pitches, the organ fully supports the congregation’s singing and easily fills the room with sound. The two complete principal choruses allow the organ to lead congregations of varying sizes, from 10 to 600. The wide selection of reed and flute stops offers ample color and variety for responding to hymn texts and playing repertoire.
The organ was first played for worship on Reformation Sunday 2006, and Mary Preston will play the inaugural recital this month. I am grateful to all of the Buzard staff who worked at a strenuous pace to deliver and install our organ, and to Scott Riedel for his insight and guidance throughout the project. Finally, a special thanks to the staff, worship and music and organ committees, and members of Mt. Pleasant Lutheran Church who had the long-term vision required to undertake this project.

—Joshua Brown

Buzard Opus 34
33 stops, 40 ranks

GREAT (4" wind)

16' Lieblich Gedeckt

8' Open Diapason

8' Flûte à Bibéron (wide chimneys)

8' Viola da Gamba

4' Principal

4' Spire Flute

22⁄3' Nazard

2 Fifteenth

13⁄5' Tierce

11⁄3' Mixture IV

8' Trompete

Tremulant

Cymbalstern

8' Festival Trumpet (Solo)

Great to Great 16', UO, 4'

Swell to Great 16', 8', 4'

Solo to Great 16', 8', 4'

SWELL (4" wind)

8' Violin Diapason

8' Stopped Diapason

8' Salicional

8' Voix Celeste (gg)

4' Principal

4' Harmonic Flute

2' Recorder

2' Full Mixture IV

16' Bassoon

8' Trompette

8' Oboe

4' Clarion

Tremulant

8' Festival Trumpet (Solo)

Swell to Swell 16', UO, 4'

Solo to Swell 8'

SOLO (4" wind)

8' Harmonic Flute

8' Flute Cœlestis II (Ludwigtone)

4' Open Flute

8' Clarinet

8' Festival Trumpet (horizontal)

Tremulant

Chimes

Solo to Solo 16', UO, 4'

Swell to Solo 16', 8', 4'

PEDAL (4" wind)

32' Subbass (1–12 digital)

32' Lieblich Gedeckt (1–12 digital) (Gt)

16' Open Diapason (in façade from FFF)

16' Bourdon (stoppered wood)

16' Gedeckt (Gt)

8' Principal

8' Bass Flute (ext 16')

8' Spire Flute

4' Choral Bass (ext 8')

4' Open Flute (ext 16')

16' Trombone

16' Bassoon (Sw)

8' Trumpet (ext 16')

8' Festival Trumpet (Solo)

Great to Pedal 8', 4'

Swell to Pedal 8', 4'

Solo to Pedal 8', 4'

J.H. & C.S. Odell,
East Hampton, Connecticut
Scarborough Presbyterian Church, Scarborough, New York
I remember receiving my first phone call from Scarborough Presbyterian Church in late January 2005. I was delighted to have the chance to become acquainted with this church and with its organ, my own family’s J.H. and C.S. Odell Opus 327, installed in 1894. Six years on, there is much to report.
One cannot help but be immediately taken in by the beauty of Scarborough Presbyterian, both interior and exterior. The church is set along old Route 9 in Briarcliff Manor. Approached from either north or south, the siting of the building (whose exterior is rich with classical elements) blends in gracefully with its setting.
Scarborough Church was a gift from Mrs. Elliott Shepard as a memorial to her husband in 1893. The architects of record for the church were Haydel and Shepard, a short-lived partnership of Stanford White’s nephew, Haydel, and a nephew of Mr. Shepard. Their only other significant building, the Fabbri Mansion on Manhattan’s 64th Street, echoes the neo-classical style of Scarborough Church—briefly called, “Shepard Memorial,” but organized later as Scarborough Presbyterian. A reprint of the dedication announcement from the May 12, 1895 edition of the New York Times includes copious detail of the building’s appointments, which in modern architectural parlance is properly classified as Beaux-Arts:

The main design of the ground plan is a cross, a porte cochere being one of the short arms of the cross, and the pastor’s study the other arm. The church is built of granite rubble, with trimmings of Indiana limestone. The granite is of a pink tinge, which harmonizes pleasantly with the grayish limestone, and the effect is very striking to the visitor.
The height of the tower from the steps to the top of the cross is about 120 feet. The architecture of the exterior is a distinctly American interpretation of the Renaissance idea as it was in the time of Louis XIV. The granite used in the body of the structure was quarried on the estate of Col. Shepard, which is a short distance south of the edifice.
In the three large windows of the main structure, each nineteen feet high, are stained glass designs. Strictly classical treatment has been used in the interior of the building. The main auditorium has a seating capacity of 350, and the Sunday-school room of 150 persons. The floors are of mosaic in the church, and the pews are of carved wood. The building is as near as possible fireproof, as little wood being employed in the construction as circumstances would permit.
The wood-paneled [coffered] ceiling is secured to the entablature by carved wooden corbels. This ceiling is one of the main features of the room. It is made of California redwood. Its side surfaces are enriched with twenty-eight panels, each six feet square, and with carved wooden rosettes in their centers. This design encloses, as in a large frame, a large panel, itself broken up and subdivided into a considerable number of smaller panels. In the center of the ceiling is a great carved redwood cross. The inner walls are of cement, tinted to harmonize with the ceiling.
The choir dome, under which the pulpit is placed, at the end of the church, is paneled with rosettes, and a large skylight admits light from above. The building is lighted at night with electric lights, and the heating is to be in the winter season by hot-air appliances from the basement. Perfect ventilation is secured by means of exhaust flues in the side walls from the floors to the roof. The organ is in the main tower, while the keyboard is under the choir dome.

As the article states, the console was originally placed in the chancel area, leading me to speculate that this organ was likely the first all-electric adaptation of the patented Odell tubular-pneumatic action. In comparison, there are appreciable, if minor, design differences in the primary mechanism employed in the manual chest action used in our Op. 313 at St. Michael’s Church on West 34th Street in Manhattan. That organ, which is presently under our care and slated for major restoration work in 2012, was originally all tubular-pneumatic when it was built only one year prior in 1893. It has been interesting to note the nuance in mechanisms, scaling, and voicing practices of two Odell instruments that were built at nearly the same time.
As one can easily imagine the unwieldiness of playing the gallery organ from the chancel, it is not surprising that the console was later relocated to the gallery. Apart from this, the organ remained largely intact until the first major campaign of rebuilding and revisions began in the late 1980s through the 1990s.
At one time, there had been ambitious plans for the instrument, evidenced in the documentation of the Peterson switching system installed by a prior technician. Most of these plans went unrealized, though the addition of an anachronistic and stylistically questionable “Positiv” division had been carried out. Other changes included additional reed stops in the Swell, as well as evidence of attempts at rescaling, mostly in the principal stops of the Great.
In the meantime, problems of the winding system and mechanism were largely ignored. It was in this state that I first examined the organ at Scarborough in 2005. The Swell chest was then largely non-functional, owing mostly to issues with stuck sliders and pallet actions in need of rebuilding. I quickly realized that not only would a program of full mechanical restoration be needed, but also a careful reversal of many of the tonal changes, if the final result were to resemble anything that would make sense to a properly trained organist.
In addition to the difficulties with the organ, Scarborough was managing a leadership transition, something that is always trying in the life of any parish. The congregation faced this while contemporaneously entertaining bids for the organ project from us and other local firms, as well as considering wholesale replacement of the organ with a new electronic substitute. It was not until I made a detailed presentation to the congregation that we were able to at least keep the latter option off the table.
While we eventually prevailed as selectee for the organ project, there was no appreciable progress in going to contract until the appointment of Kenneth Potter as organist and director of music in 2007. Potter took the position on the condition of the organ’s restoration. This was agreeable to the Session and we were at last able to proceed.
No sooner had Mr. Potter taken the position than he reached out to me, and a lively discussion ensued on how best to revise and restore the organ. Plans at one point had even branched out into an entirely new case design, for which I excitedly prepared several conceptual sketches, but these were later set aside for both practical and aesthetic reasons. With our limited budget, the majority of our work would have to focus on restoration of the pipes, console, and mechanism. Moreover, with limited gallery space and an already richly appointed interior, it was difficult to realize a case design that would match the level of ornamentation or allow for a proper sense of proportion without getting into models that we knew would be far too elaborate. We officially went to contract in late 2007 and set to commence work in early 2008.
Eventually we settled on the design one sees today, which in many respects closely resembles the organ’s 1894 specification. The floating “Positiv” is gone, its Oboe restored and returned to its proper place in the Swell. The Swell Vox Humana was likewise deleted in favor of the Bassoon 16′, though not without some regret. The addition of the Clarion 4′ was kept, though the stop was revoiced in order to be more in scale (in terms of power) with the rest of the division’s reed chorus. Apart from careful tonal finishing and some adjustments to the power of some of the stops, the rest of the division remains as original but for the replacement of the Aeoline with a matched Voix Céleste for the Salicional.
I approached the Great with similar care. In sorting through the pipework in the shop I was able to review (and correct) prior attempts in rescaling and revoicing. Thankfully, the critical backbone stops of the division (the Open Diapason 8′, Gross Flute 8′, Gamba 8′, and Harmonic Flute 4′) had been left mostly untouched. Efforts had been made to re-scale the principal chorus from 4′ upward with limited success: rather than inserting new pipes in the bass and shifting the entire rank upward, pipes from various sources were randomly inserted in the compass of the Principal, Twelfth, and Fifteenth. To the uninitiated this probably seemed a harmless practice, but I was determined to restore some sense of order. Thus we maintained (and in some cases increased) the rescaling, as my experience with Odell scaling practices from this era (as well as my review of this instrument in particular) called for a significant increase in order to balance the power of the stops of the chorus without attempting to “voice around the scale.” Thus I reoriented the prior attempts at rescaling by fabricating new pipes with properly matching 2/7 mouths, using matched common metal (roughly 70% lead) as opposed to the uncharacteristic spotted metal used before. This allowed better control in the adjustment of the power of these ranks as I worked on them in the voicing room.
The other changes to the Great included the addition of the original Swell Bourdon on new unit windchests, so as to be available at 16′ and 8′ pitch. The Dulciana was deleted in favor of a new, matching principal-scaled Seventeenth. This exchange was part of an overall plan to keep a third-sounding rank available in the division, since the original Great Cornet mixture (17-19-22) was to be rescaled and recomposed into a suitable chorus mixture based on 2′ pitch (15-19-22). The original Cornet Mixture in the Swell had been retained, and Ken and I were in agreement that one tierce mixture per organ was more than sufficient.
Apart from these changes, pipe restoration was straightforward. Along with the windchests and console, everything was brought back to our facility and carefully cleaned. Metal ranks went through our pipe shop for repair. Wooden pipes were repaired and pipe stoppers were repacked. But for the Bassoon 16′ in the Swell and the Trumpet in the Great (which I kept for myself to work on), the Swell reeds went to Trivo in Hagerstown for restoration. Broken reed pipes were properly reblocked, tuning inserts were replaced, and shallots, tongues, and wedges were carefully cleaned and refitted as required.
The rebuilding of the mechanism presented several challenges. The manual windchests were essentially Odell slider chests with electro-pneumatic pulldown motors and slider motors. Both chests were completely stripped down to their tables at our facility so they could be evaluated and repaired. Thankfully, re-tabling was not needed, though damage to some of the sliders was so severe that some of them had to be replaced. Unlike modern slider chests (where engineered plywood is used), the bottoms of the Odell chest grids are covered with motor cloth, and the pallet openings are formed by blocking in the channels inside the pallet box and covering the area with a layer of packing leather. All this was restored to match the original configuration, whereafter the grid channels were carefully sized with thinned shellac, as is the custom. It was an arduous, not to say messy process, but the result was the total elimination of the numerous runs and bleeds encountered prior to removal. Finally, the chest pallets were all re-dressed with new felt and leather, and the motor and primary systems rebuilt.
With the slider motor system we faced a particular difficulty: Odell pneumatic slider motors were an innovative design in their day, but they can be fickle. When they work, they work well, but they often grow slow and unresponsive. Knowing this, in the planning stages of the project I seriously considered conversion to an electric slider motor system, but instead held this out as a last resort. The original pneumatic motors were dutifully rebuilt, and after some experimentation I eventually realized a solution: by placing the slider motor assemblies on their own separate wind reservoir and increasing the pressure moderately, I realized two immediate benefits: the slider motion was now swift and sure, and the action of the sliders no longer had any effect on the divisional wind pressure as they were actuated. I owe the inspiration for this concept to my colleague Timothy Fink, who several years ago used a similar approach when he designed his own pneumatically powered slider system (based in part on the Odell design) for the new organ he built for Grace Lutheran Church in Naples, Florida.
As the Pedal division had recently had its action rebuilt, we were free to leave this section alone and concentrate our remaining efforts on the console, winding system, and façade.
Dealing with the winding system was simple. The original massive single-rise reservoir was replaced with four new properly sized Odell reservoirs, one for each division, and the fourth for the aforementioned slider motor assemblies.
The console carcass was gutted and fitted with new, rear-fulcrum keyboards with basswood levers, and the manual compass restored to the original 58 notes. The newer pedalboard was kept. The stop-action rail and stop-action magnets were replaced with a much more reliable Harris tilting-tablet assembly, whose appearance is more characteristic of a traditional Odell console. The interior of the console was fitted with new panels made of sapele. We installed a new, integrated control system with the customary modern feature set.
The façade, which contains the bottom seventeen notes of the Great Open Diapason, was carefully stripped, repaired, and restored. The original zinc tuning flaps were replaced with spotted metal tuning scrolls. I personally handled the preparation and finishing process. A catalyzed base primer that bonds directly to the metal was used as the undercoat, over which I applied specialized metal lacquer mixed with gold flake powder. The result is a richer, deeper gold color that was accented by the application of silver flake lacquer on the pipe mouth inserts.
Our final step was to replace the 1950s-era wall panels below the impost of the façade. The layout was sketched by my wife Susan, who is a classically trained architect. With no cues from me, she intuitively established a rail and stile pattern that picked up on the center point placements of the pipes in the façade, while maintaining symmetry throughout. The panel molding, which required a custom-made set of molder knives, is a duplication of the custom panel moldings used throughout the church. The panels themselves are made from the same sapele used in the console, and are stained to match the existing appointments. Though it is minor, this was a welcome embellishment to the appearance of the organ.
Members of the Odell staff who contributed to this project include: John Williams (chest restoration, new chest, panel, and reservoir fabrication), Stewart Skates (pipe repair, fabrication, and restoration), Scotty Giffen (site, restoration, and assembly work), David Wason (wiring, site, restoration, and assembly work), Douglas Keilitz (site work, tuning, and tonal finishing), and myself (design, planning, wood and metal pipe finishing, voicing, and tonal finishing). Rigging for the removal and reinstallation was handled by our friends at Auer’s of New York City, long known for their skill in handling this sort of work.
We are grateful to the staff and congregation of Scarborough Presbyterian Church for being given the opportunity to restore this instrument and return it to service. I am particularly grateful to Kenneth and Christine Potter (who have become great friends as well as champions of our work), and also the Reverends Chris Iosso, Dae Jung, and Tim Ives, worship and music committee chair Lindsay Farrell, and most especially the late Florence Fletcher, to whose memory the new organ façade is dedicated.
—Edward Odell
East Hampton, Connecticut

It isn’t often that an organist takes a job with the congregation already understanding that the organ needs to be rebuilt, and he gets a significant say in how it gets done. My first decision was to commit what one might call a heresy among organists. I agreed that the organ needed to be reduced in size; we went from 37 ranks to 30. The results speak for themselves, as much of that reduction involved removing redundant ranks, ranks that served no useful purpose.
Prior to the rebuild, the Swell had become almost completely unplayable and been more or less abandoned. We realized the removal of the entire instrument to the Odell shop would be needed. Now rebuilt, the Swell is a wonderful division of great subtlety and color.
It made sense to keep certain additions, but we wanted these additions to form a real ensemble, and for the organ to speak into the room naturally. A fine Clarion 4′ had been added to the Swell. The Bassoon 16′, Cornopean 8′, Oboe 8′, and Clarion 4′ formed a reed battery that we were loath to break up. In order to keep it, the old Vox Humana 8′ had to go. I deeply regretted this loss, but I love the full reed chorus as it is now. The Aeoline 8′ went the same way to make room for the Voix Céleste. There was more than enough pipework left for quiet music, with the very gentle strings, a Stopped Diapason 8′, and a lovely Rohr Flute 4′ of surpassing beauty.
In the Great division, the previous Tierce had been derived from a split slider on the Mixture. It never worked very well, but I felt it was important to have a full Cornet on the Great, so we sacrificed the Dulciana. The Seventeenth that took its place is the only wholly new rank in the rebuild. The Dulciana’s place in the tonal scheme was taken by an 8′ extension of the 16′ Bourdon. I felt that with the three other strong 8′ stops (Open Diapason 8′, Gross Flute 8′, and Gamba 8′) we needed a quiet 8′ flute. This Bourdon 8′ can be coupled with the Gamba 8′ and form a fonds doux, but it also works beautifully alone, or with the Principal 4′ or Harmonic Flute 4′. With all 8′ flue stops on the Great drawn, one has a close approximation of the classic fonds de huit. After rescaling and restoration, the Great chorus is powerful and intense. With the coupling of the Swell reeds, it becomes immense.
In the process of this rebuild, I learned a lot about what stops are truly necessary. As someone who cut his teeth on the Organ Reform movement, I had difficulty understanding a tonal scheme built on generously scaled 8′ stops, with smaller upperwork, or a second manual division without a Principal 4′. In time, I have come to understand this instrument on its own terms. The Violina 4′ really does serve a purpose, and I have come to love the very modest 4′ Rohr Flute in the Swell; it is delicate and very non-intrusive, and I never seem to stop finding uses for it. The Flute 2′ with the Cornet III makes a wonderful sparkle in that division without adding weight. The Oboe 8′, now returned to the Swell, is an excellent addition to the division’s chorus, adding just enough weight to balance the flues. So much for the Swell organs I was previously accustomed to, with their 8′ Gedeckt foundation and blazing upperwork!
It thrills me endlessly to have other organists come in and play. I love to wander around downstairs and listen, often asking what stops they have on. This organ, which sounds immensely powerful in the gallery, is gentle and convincing downstairs—the fullest registration is not overpowering, but rather full, blended, and satisfying.
There isn’t an ugly stop on the entire instrument. Every rank is distinct, beautiful, and makes the listener sit up and notice, whether quiet, mezzo forte, or loud. Nothing is overbearing and the range of color is amazing. Edward Odell has demonstrated great skill as a voicer, taking stops that had been poorly regulated, and restoring, focusing, and adjusting them to create a satisfying, integrated ensemble. He was ably assisted by Doug Keilitz on the tonal finishing.
Let me conclude by saying we are blessed with some of the finest acoustics I have ever experienced in a church, both for organ and choral music. The instrument is now inspiring our choir to new heights. As I had hoped, the wonderful sounds coming from the loft are enhancing our worship and attracting new members.
—Kenneth Potter
Organist and Director of Music

J.H. & C.S. Odell Opus 327
Scarborough Presbyterian Church, Scarborough, New York

GREAT
16′ Bourdon 70 pipes
8′ Open Diapason 58 pipes
8′ Gamba 58 pipes
8′ Gross Flute 58 pipes
8′ Bourdon (from 16′ Bourdon)
4′ Principal 58 pipes
4′ Harmonic Flute 58 pipes
22⁄3 Twelfth 58 pipes
2′ Fifteenth 58 pipes
13⁄5′ Seventeenth (new) 58 pipes
III Mixture 174 pipes
8′ Trumpet 58 pipes

SWELL – Expressive –
in reconfigured expression chamber
16′ Bourdon 58 pipes
8′ Open Diapason 58 pipes
8′ Stopped Diapason 58 pipes
8′ Salicional 58 pipes
8′ Voix Céleste 58 pipes
4′ Violina 58 pipes
4′ Rohr Flute 58 pipes
2′ Flute 58 pipes
III Cornet 174 pipes
16′ Bassoon 58 pipes
8′ Cornopean 58 pipes
8′ Oboe 58 pipes
4′ Clarion 58 pipes
Tremulant

PEDAL
32′ Resultant (special configuration,
from Open Wood and Bourdon)
16′ Open Wood 30 pipes
16′ Bourdon 54 pipes
8′ Gedeckt (ext 16′ Bourdon)
8′ Violoncello 30 pipes
4′ Flute (ext 16′ Bourdon)
16′ Bassoon (from Swell)

Mixture Compositions
Great
1 to 25 15-19-22
26 to 37 12-15-19
38 to 58 8-12-15

Swell
1 to 25 17-19-22
26 to 37 15-17-19
38 to 58 8-15-17

Couplers
Great to Pedal 8′ (reversible)
Great to Pedal 4′
Swell to Pedal 8′ (reversible)
Swell to Pedal 4′

Great to Great 16′
Great Unison Off
Great to Great 4′

Swell to Great 16′
Swell to Great 8′ (reversible)
Swell to Great 4′

Swell to Swell 16′
Swell Unison Off
Swell to Swell 4′

Pistons
12 generals (duplicated on toe pistons)
6 divisionals per division
4 reversibles (3 coupler, 1 Sforzando)

Accessories
32 levels of capture memory
12-step transposer
Programmable Sforzando
Memory controls in keyslip
Programmable Crescendo
MIDI for record/playback

Marceau & Associates Pipe Organ Builders, Inc., Seattle, Washington
Trinity Parish Episcopal Church, Seattle, Washington

From the builder
My first contact with Trinity Parish took place in the summer of 1978, when, as an employee of Balcom & Vaughan Pipe Organs of Seattle, I was on the crew that removed the church’s 1902 Kimball instrument. I recall the rather thick layer of furnace dust and grime that made the removal fairly dirty! Since none of the windchests or reservoirs were to be retained in the new organ project, these components were destined for the dump. That project incorporated some of the original Kimball pipework, but not with any degree of success. I subsequently relocated to Portland, Oregon and founded Marceau Pipe Organs in 1985.
I had begun maintenance of the Trinity pipe organ in 1983, when Martin Olson was appointed organist/choirmaster. As the existing console began to show signs of advancing age, Marceau Pipe Organs was awarded the contract of building our first three-manual, tiered drawknob console. With the able assistance of Frans Bosman (who built the console shell), we assembled new components from P&S Organ Supply (keyboards), Harris Precision Products (stop action controls), and Solid State Logic (combination action—now Solid State Organ Systems), and installed this in the fall of 1989.
The second phase focused on a redesign of the organ chamber to accommodate new slider-pallet windchests (produced in the Marceau shop) and a façade that would pay homage to the original Kimball façade. The budget did not allow for the total number of stops to be installed at that time. It was through fate that this instrument was completed! The massive Nisqually earthquake of 2001 almost closed this historic building for good, if it were not for the unshakable vision of this congregation, led by their rector, the Rev. Paul Collins.
During the time in which the church was being rebuilt and upgraded, we were fortunate enough to acquire a large pipe organ of about 35 ranks. From this inventory, stops that were prepared for future addition could be added at about half the cost of new pipes. One of the unique trademarks of a Marceau pipe organ is the inclusion of vintage pipework that is rescaled, revoiced, and re-regulated to be successfully integrated with stops, both old and new. The Trinity Parish pipe organ is no exception. A quick glance at the stoplist suggests a number of musical possibilities that make it possible to interpret organ repertoire from Bach to Manz and everything in between!
In 2005, I moved back to Seattle to open a Seattle office for our activities in the Puget Sound region. In 2008, we moved into a small but very useful shop in the Ballard district and have seen our work increase dramatically since then. While I enjoy each project that comes through the shop, I will always think fondly of our Opus IV at Trinity Parish and how that instrument continues to be one of great satisfaction and pride.
—René A. Marceau

From the organist
I started as organist/music director at Trinity Parish Church in 1983, over 27 years ago. At that time, there was a recently remodeled pipe organ, with no façade pipes, grille cloth, and a used console that was gradually failing. I had worked with Marceau & Associates on other organ projects in the past and engaged him to build us a new console. This proved to be the start of a professional and personal friendship that has lasted many years! This was Marceau’s first console and was planned with tonal revisions and (hopefully) new pipework in the future. I didn’t know where the money was to come from, but I had a lot of faith. Shortly after the new console was built, notes started going dead, and we found out that the organ had used Perflex instead of leather; we faced a future with an increasing number of dead notes.
At this time the vestry encouraged us to look at the existing tonal plan, and the organ was totally rebuilt using slider chests. Each of the three arches of the organ had façade pipes installed, helping to keep the visual appearance of the organ consistent with the nineteenth-century English Country Gothic architecture. At this point, we were out of money and only about a third of the planned pipework was installed.
Our planning for fund raising came to an abrupt halt on Ash Wednesday 2001. The Nisqually earthquake hit about an hour before the 12:10 Ash Wednesday service. The organ was not too badly damaged, but the building was unusable. Part of the tower collapsed into the nave, and the north and south transept walls moved outward, so that daylight could be seen coming through the walls! We were red-tagged by the city, meaning that no one could go into the building. For almost five years we worshipped in the parish hall, using the piano and a lovely one-manual positive (built by Marceau), lent to us by the Seattle AGO chapter. At times we didn’t know if the money would be found to rebuild the church, but Trinity persevered and the millions of dollars needed were raised.
As we approached the completion of the church restoration, we realized that if we didn’t finish acquiring the missing pipework now, it might never happen. The vestry gave approval, and thanks to a lot of searching by René Marceau, we added the missing 20 ranks of pipes—all recycled pipework. Today, the 19th-century sanctuary has solid wood floors, hard reflective walls, and very little carpet. Thanks to Marceau’s voicing skills, the pipework from 1902 works with the ranks added in the 1970s and 2000s.
During the first several weeks in the rebuilt sanctuary and “new” organ, I was surprised that almost everyone stayed and listened quietly to the postlude, but I didn’t think it would last. I was proven wrong again! Four years later, almost everyone still stays for the postlude! Years ago, under the leadership of Ed Hanson, there was a weekly lunchtime organ recital every Wednesday. When the church and the organ were rebuilt, I decided to revive that tradition, and for some years now we have had a weekly organ recital, often featuring student organists from the area. These recitals, combined with other concerts here at Trinity, make this organ one of the most heard organs in the Seattle area.
—Martin Olson
Organist/music director

History
Trinity Episcopal Church has a long history as one of Seattle’s oldest congregations—and music has been a part of that history from the very beginning. While the parish’s first organ was a reed organ of unknown manufacture, the parish has the credit of being the first to bring a pipe organ to Seattle. Preserved vestry notes from February 2, 1882, page 82, indicate a signed order to buy an organ “of Mr. Bergstrom’s make” for $1,500. This is further corroborated in Thomas E. Jessett’s Pioneering God’s Country—The History of the Diocese of Olympia, 1853–1953, in which he states on page 33, “The first pipe organ in Washington was installed in Trinity Church, Seattle, in 1882.”
By 1900, the parish was ready to acquire a larger instrument, and a contract was drawn up towards the purchase of a larger pipe organ. The vestry even announced they were willing to spend $6,000 if necessary. Such was the importance of music to the parish!
A contract was signed with the Hutchings Organ Co. of Boston for an organ to cost $2,500 plus $138 for a water engine to provide wind. The organ was shipped in December 1900. Such a listing does not appear on the Hutchings opus list, so it was likely built under the name of Hutchings-Votey, whose opus list is not complete. Coincidentally, the parish requested Dr. Franklin S. Palmer of San Francisco to come test the completed organ and to play the dedicatory concert. Dr. Palmer would later become the organist of St. James R.C. Cathedral in Seattle, and was principal in the design and acquisition of that congregation’s well-known 4-manual, 1907 Hutchings-Votey. Sadly, the Hutchings-Votey only lasted about a year, and was destroyed by a fire within the church on January 19, 1902.
By May 2 of that same year, the vestry awarded a contract to the W. W. Kimball Co. of Chicago for a three-manual organ to cost $7,500. It had 30 speaking stops and 29 ranks, and despite the growing influence of orchestral organs, the Kimball was built more along mid-to-late 19th-century tonal designs, with a mostly complete 16′, 8′, 4′, 22⁄3′, and 2′ principal chorus on the Great, capped by an 8′ Orchestral Trumpet. The Swell reflected more of the orchestral influence, with one 16′ flue register, six 8′ flue registers, and only one 4′ flue register, plus an 8-8-8 reed complement. Even the Choir sported a 16′ flue, but included the standard 2′ Harmonic Piccolo and 8′ Clarinet among its stops. And the Pedal of 16-16-16-8 included a very fine wooden Violone. Monthly recitals were given by the organist, and often included a soloist, a quartet, or even the full choir.
In 1945 the organ was electrified by Charles W. Allen, successor to Kimball representative Arthur D. Longmore. An only slightly used Kimball console was acquired from the Scottish Rite Cathedral in Tacoma, one of two installed there. The chest primaries were electrified, some stops were moved from the Great to the Choir, and a few new ranks were added/substituted. The organ lasted pretty much unaltered in this form until 1977.
Beginning in 1975, Balcom & Vaughan Pipe Organs, Inc. of Seattle had been discussing options for rebuilding the Kimball at Trinity. Various stoplists and drawings were considered. In 1979 the parish finally decided upon a plan, and the organ was rebuilt. But the Balcom & Vaughan was essentially a new organ, on new chests, with predominantly new pipework, and retaining 12 selected voices from the venerable old Kimball. The impressive 1902 Kimball façades were eliminated, and little ‘buffets’ of exposed pipework took their place. The B & V was designed along “American Classic” lines akin to Aeolian-Skinner, which is where then B & V president, William J. Bunch, had been working for many years. While the new organ was more transparent-sounding than the Kimball, and offered more color in the way of mutations and mixtures, the blend between new and old was not entirely satisfying, nor did the brighter ensembles seem to adequately fill the church space.
In 1989 the Portland firm of Marceau & Associates provided a handsome new terraced drawknob console to replace the existing used Kimball stopkey console. Several preliminary stop changes were made with existing pipework to improve the sound of the organ. In 1995 Trinity Church awarded a contract to Marceau & Associates for the rebuilding of the existing organ. This effort sought to take the existing pipework and through rescaling, recombining, and revoicing, create a more cohesive whole, including appropriate new pipework. Each of the manual divisions now has a principal chorus in proper terraced dynamics. Part of this project was to recreate the three Kimball façades in spirit, but with a new twist. The church now has an eclectic 3-manual organ, with bold principals, colorful flutes, two strings with mated celestes, mutation voices, mixtures, and reeds of both chorus and solo colors. And all is housed behind a handsome façade of polished zinc principals in the original three bays, providing a sense of visual continuity with the past.
—Jim Stettner
Organ historian

Stoplist description
As with any instrument, the most critical areas of interest are the principal choruses. Our Opus IV is blessed with two divisions with 8′ Principals (Great and Positiv). The Great principal chorus is based on a normal scale 8′ Principal, with the low 19 notes in the façade. The 4′ Octave, 2′ Super Octave, and III–V Mixture are all stops retained from the 1978 project, rescaled and revoiced for a more energetic, colorful presence in the room. The Positiv principal chorus is 1–2 notes smaller, with a higher-pitched Mixture. Added to this chorus is the Sesquialtera II, of principal character, which imparts a “reedy” quality to the overall sound. Of particular note is the 8′ Principal. It is scaled 2 notes smaller than the Great 8′ Principal; when heard in the chancel it has a very Geigen-like quality, but takes on more character in the nave, and is a perfect complement to its “big brother.”
The Swell principal chorus, based on the 4′ level, includes a III–IV Mixture, which works well with the reeds in this division. The Pedal principal chorus is based on the 16′ Principal (of wood) and progresses up to the III Mixture, which includes a Tierce rank. I find this addition completes the Pedal chorus without the need to include the reeds.
The Great flutes (8′ Rohrflute, 4′ Koppelflute) provide the foundation for the rest of the flute stops. Contrasting and complementary stops appear in the Positiv (8′ Gedackt, 4′ Spillflute, 2′ Lochgedackt), with smoother-sounding stops in the Swell (8′ Holzgedackt, 4′ Nachthorn, 2′ Waldflute). Of particular note is the Positiv 2′ Lochgedackt, whose character is gentle enough to soften the assertive sounds of the Sesquialtera.
There are two sets of strings, found on the Swell and Positiv manuals. The Swell 8′ Salicional and Positiv 8′ Gemshorn are from the 1902 Kimball; the Voix Celeste is of an unknown builder, while the Gemshorn Celeste is an original Dolce built by Stinkens in the late 1960s.
It is interesting to note that all of the manual reeds were built by Stinkens at some point in time. My colleague, Frans Bosman, was very successful in regulating each stop to work well in both solo and ensemble roles. The Great 8′ Trompete is dark and robust in character, contrasting with the brighter, more aggressive Swell 8′ Trompette. The Swell 8′ Oboe is also bright but at least one or two dynamic levels softer. The unit Fagott rank is from the 1978 project, appearing in the Pedal only. It was extended to play on the Swell at both 8′ and 4′ pitches. The Positiv 8′ Krummhorn is scaled more as a Dulzian, giving this stop the power to add color to the Positiv chorus. The most surprising set of reeds is found in the Pedal. Both the 16′ Posaune/8′ Trumpet and 4′ Clarion are vintage pipes. There was some concern about tonal and dynamic blend; these fears were laid to rest when, after regulating these stops, they were the perfect balance to the full ensemble!
There are Tierce ranks in every division. The Great mounted Cornet (located behind the façade pipes) can be used for classic French repertoire, the Positiv Sesquialtera II can be used in both solo and ensemble roles, the Swell Cornet decomposée allows for the individual mutations to be used separately or in combination, and the Pedal Mixture contains the tierce rank and is quite effective in chorus work.
—René A. Marceau