New Organs

John-Paul Buzard Pipe Organ Builders, Champaign, Illinois, Opus 38
St. Mark the Evangelist Catholic Church, San Antonio, Texas

St. Mark the Evangelist Catholic Church, San Antonio, is a vibrant Christian community of 5,000 families, located about twenty minutes north of the San Antonio International Airport in a new residential neighborhood on Thousand Oaks Drive. They have a well-deserved reputation for superior community outreach, building several Habitat for Humanity houses per year and operating a traveling meal program for the needy. Former organist and director of music and liturgy Lena Gokelman contacted me nearly twelve years ago to share ideas for a new pipe organ for the large church building then being planned. She and their consultant, Fr. James Brobst, traveled to Illinois to hear and play our instrument at Holy Family Catholic Church in Rockford, and were immediately convinced of the need to have the Buzard Sound at St. Mark’s.

St. Mark’s had no pipe organ in its original temporary sanctuary, and the majority of parishioners had never heard one. It was a daunting endeavor to educate the parish about the difference that a pipe organ could make in their liturgical and musical lives, and then convince them that they needed one! A long-standing parishioner was convinced, and through his anonymous generosity, made it happen.
This new organ is our 38th, and was designed to visually complement the sculpture of the Christus Rex, incised into and built out from the brick wall at the front of the assembly. The building seats about 1,000 people and is surprisingly lively in its acoustical environment. The organ itself is raised 18 feet above the floor and sounds nicely down the building’s axis. Sonically it fills the entire room whether playing soft or loud. The woodwork in the façade is solid white oak, stained and finished to relate to the church’s other woodworking. Pipes in the façade are made of polished tin and flamed copper.

Two sets of horizontal trumpets emphasize the aural excitement that a pipe organ can bring to a liturgical occasion. A high-pressure Tuba made of polished tin is in the organ’s façade; a polished copper set of Pontifical Trumpets on lower pressure is mounted over the entry doors. Lest one think that resources were squandered on an unnecessary luxury of two chamades, they were included only after the organ’s chamber space had been completely filled with the stops necessary for a full and proper classically conceived and romantically executed specification.

The choral singers are located in a “bump-out” area to the right of the building’s axis. Because the choir is effectively in another room, and cannot hear the organ clearly, we built a four-stop Choral Organ to accompany their singing, housed in a small free-standing case that stands behind them. These four stops are of sufficient tonal variety and volume gradations to support the choral singing in perfect balance. Stops from the main portion of the organ may also be used to supplement the Choral Organ’s sound.

The instrument contains 35 independent stops and 43 ranks of pipes across three manuals and the pedal keyboard. As in all Buzard organs, there is a wealth of tonal variety, even if the instrument is modest in size. At the hand of our tonal director Brian Davis, no two diapasons sound exactly alike; the flutes are liquid in tone and often take their cues from their orchestral counterparts; strings impart a warmth and keenness to the palette. The chorus reeds are spectacular, each stop having its own depth and degree of éclat; the plaintive German Romantic Oboe is a tremendously effective solo player, but also colors the Swell flues subtly. All metal pipes are made of rich, high tin-content metal of generous thickness. On-site tonal finishing took a month to accomplish.

The organ’s engineering was accomplished by our executive vice-president and chief engineer, Charles Eames. This instrument has the distinction of affording him one of his greatest challenges: designing a pipe organ with a 14-inch steel beam running through its center! Although chamber space was provided for a “future organ” when the church was built, neither architects nor contractors thought anything wrong about running a steel beam through its middle! Although the organ occupies a “chamber,” the instrument is still housed in a free-standing case. This allows the sound to effortlessly project into the church, and for us to minimize any variables while installing on-site. This also afforded us the opportunity to build a ventilation system that brings conditioned air from the church up to the top of the organ, spilling down naturally, thereby keeping the instrument in tune.

The parish is “between organists.” So, in order for the parishioners to hear what an organ could do for worship, I played for the three Sundays that I was in San Antonio voicing the organ. The first Sunday, people heard only those few stops that were finished. But by the second and third Sundays, I played the hymns, prelude, and postlude using the versatility of the entire instrument. The organ has been extremely well received by the parishioners, clergy, and the wider community. Organist David Heller will be dedicating it in a Solemn Pontifical Mass followed by a concert on Saturday, November 21.

My deepest thanks go to St. Mark’s for commissioning us to build this organ, especially to Pastor Kevin Ryan, administrator “Dot” Hamlin, our contact person Lena Gokelman, music director Dolores Martinez and her assistant Courtney Guernsey, facility manager George Wetherill, and Irene Marin, who makes the best tortillas I’ve ever tasted!

A pipe organ is far more than the sum of its parts, or the sum of the labor-hours of the tremendously dedicated individuals with whom I am blessed to work. They all deserve special recognition:

David Brown, foreman, service department and installation
Brian K. Davis, tonal director
Stephen Downes, metalworking, tonal assistant, installation
Charles Eames, executive vice-president and chief engineer
John Jordan, service technician
C. Robert Leach, cabinetmaker façade, general woodworking, installation
Stuart Martin, cabinetmaker façade and console cabinetry
Shane Rhoades, cabinetmaker, winding system, installation
Jay Salmon, office manager
Lyoshia Svinarski, cabinetmaker and wood finishing
Stuart Weber, service technician
John Wiegand, service technician and installation
Ray Wiggs, console, electrical and windchest specialist, installation
Keith Williams, director, service department
—John-Paul Buzard

St. Mark the Evangelist Catholic Church, San Antonio, Texas
Buzard Opus 38, completed August 1, 2009: 35 stops, 43 ranks

GREAT – Manual II
Unenclosed, 4″ wind pressure
16′ Lieblich Gedeckt
8′ Open Diapason (polished tin
in façade)
8′ Viola da Gamba
8′ Harmonic Flute
8′ Bourdon
4′ Principal
4′ Spire Flute
22⁄3′ Twelfth
2′ Fifteenth
2′ Mixture V (breaks at octaves)
Tremulant
8′ Tromba (ext Ped 16′ Tbn)
4′ Clarion (ext 8′)
8′ Major Tuba (polished tin, horizontal)
8′ Pontifical Trumpets (polished copper,
horizontal)
Great to Great 16′, UO, 4′
Swell to Great 16′, 8′, 4′
Choral to Great 16′, 8′, 4′

SWELL – Manual III
Enclosed, 4″ wind pressure
8′ English Open Diapason
8′ Stopped Diapason
8′ Salicional
8′ Voix Celeste (tc)
4′ Principal
4′ Harmonic Flute
22⁄3′ Nazard
2′ Recorder
13⁄5′ Tierce
22⁄3′ Full Mixture V
16′ Bassoon (full length)
8′ Trompette
8′ Oboe
Tremulant
Cymbalstern
8′ Major Tuba (Gt)
8′ Pontifical Trumpets (Gt)
Swell to Swell 16′, UO, 4′

CHORAL – Manual I
Encased, 3½″ wind pressure
8′ Principal (polished tin in façade)
8′ Gemshorn
4′ Octave
4′ Flute
Tremulant
8′ Major Tuba (Gt)
8′ Pontifical Trumpets (Gt)
Choral to Choral 16′, UO, 4′
Swell to Choral 16′, 8′, 4′

PEDAL – Unenclosed
32′ Subbass (1–12 digital, ext)
32′ Lieblich Gedeckt (1–12 digital, ext)
16′ Open Diapason (flamed copper and
polished tin in façade)
16′ Bourdon
16′ Lieblich Gedeckt (Gt)
16′ Metal Gedeckt (flamed copper in
façade of Choral Organ case)
8′ Principal (polished tin in façade)
8′ Spire Flute
8′ Bourdon (ext 16′)
8′ Gedeckt Flute (Gt)
4′ Choral Bass (ext 8′)
4’ Open Flute (ext 16′)
16′ Trombone (wood)
16′ Bassoon (Sw)
8′ Trumpet (ext 16′)
4′ Clarion (ext 16′)
8′ Major Tuba (Gt)
8′ Pontifical Trumpets (Gt)
Great to Pedal 8′, 4′
Swell to Pedal 8′, 4′
Choral to Pedal 8′, 4′

John-Paul Buzard Pipe Organ Builders, Champaign, Illinois

Maxwell Street Presbyterian Church, Lexington, Kentucky, Buzard 2009–2010 renovation

Hayes Barton United Methodist Church, Raleigh, North Carolina, Buzard Opus 39, June 2010

I am proud to showcase a recently completed new organ, and a renovation project successfully accomplished by our service and tonal departments, to give a glimpse into the depth of our firm, and the differing types of projects that we regularly and successfully undertake.
Some years back The Diapason featured a renovation project of ours at First Presbyterian Church, also in Lexington, Kentucky. Word of the success of this project quickly sped through the community, and we were contacted by Maxwell Street Presbyterian Church’s music director, Clif Cason, about the possibility of giving their 1963 Rieger tracker action organ a mechanical and tonal “going over.” He and the parishioners at Maxwell Street Church liked the transparency and vigor of the organ’s neo-Baroque style, but weren’t convinced of the inharmonic noise in the flue voicing, nor the unstable and thin-toned reeds. The organ exhibited mechanical symptoms which signaled that work was necessary, and we discovered that the organ was impossible to tune, or keep in tune.
All of us had a turn to inspect this organ: general manager Charles Eames, tonal director Brian Davis, service department director Keith Williams, service department foreman, David Brown, and I. We discovered that the pallets had been covered in a foam-rubber substance, which was becoming sticky and gooey. Additionally, the felt bushings in the keyboards and pedalboard had worn to a point at which the action was clattery. The organ leaked wind inordinately, especially where the pull-down wires exited the slider chests’ pallet boxes.
We re-covered the pallets with felt and leather. All the deteriorated leather purses at the pull-down wires were replaced with felt punchings held down by small lead weights. Keyboards and pedalboard were restored, tracker “combs” that had been removed were replaced, small “bleed” holes were drilled into the slider chests’ tables, and the action was re-hung and balanced properly. Since re-regulating the action and eliminating the flaws we found in our initial inspection, we have discovered that many of the steel needle-axles that act as a bearing for the actions’ squares have worn and will on occasion jump out of their bearing clevises. Replacement of these axles will be a future maintenance operation.
Tonally, the organ was not a happy instrument. Years of heavy cone tuning had done its damage, especially to the small mixture pipes in the organ. Tuning scrolls on façade pipes and the larger flue pipes on the chests had been rolled down too far, and could not tune flat enough. Throughout, the sound was noisy, with a disproportionate amount of speech articulation, scratchiness in the tone, and in many of the small mixture pipes, quick speech to the point of over-blowing an octave. The reeds’ resonators were too short to couple to the pitches that the reeds’ tongues were producing, contributing to a thin and unstable tone. We all concluded that the existing flue pipes could be physically restored and the voicing amended for a significantly improved musical result. However, the reed pipes needed to be replaced.
Our tonal director, Brian Davis, came to us from Visser-Rowland & Associates and was not only intimate with the techniques of flue-regulation voicing, but also significant achievements in neo-Baroque reed making that had been made by German reed pipe maker Roland Killinger in the late 1960s. These developments produced neo-Baroque reeds of excellent tone and tuning stability, even though voiced on very low wind pressures. Ironically, just as Mr. Killinger’s experiments began to produce results, the neo-Baroque trend ended, and few of these new reeds were ever made—until this project.
All of the organ’s pipes (except the largest wood pipes screwed onto the case sides) came back to our workshop for cleaning, repair, and re-voicing. The damage to the small pipes by heavy cone tuning was too significant to warrant restoration of the cone-tuning system, so we installed stainless steel tuning slides on the smaller pipes, and restored (in many instances replaced) the scrolls on the larger pipes. While we had the pipes out we also removed the toeboards to vacuum clean the chest tables and sliders, and to manufacture toeboard overlays and new racking for the new reeds. We observed that the organ used modern-style spring-loaded slider seals, except that from about middle “C” on up these sleeves were sealed with diaphragms of pneumatic leather—all of which were ripped and leaking. No wonder this organ could not be tuned, and no wonder former technicians simply bashed and bashed those poor little pipes sharper and sharper with their tuning cones—because they weren’t receiving enough wind, because of the leaking leather! New slider seals sans leather replaced the originals. Not surprisingly, now the organ can be tuned, and stays in tune.
In order to get as much sound from the relatively small-scaled 16′ Subbass pipes (stamped “Lieblich” by the way), the corrugated tubing connecting the toe holes on the chest to the toes of the pipes screwed onto the case was replaced with larger diameter tubing, and we installed “lifters” onto the pallets, so that the pedal action would be able to open the pallets farther.
There was a half-length 16′ Posaune in the Pedal, but it was of such small scale, producing no fundamental pitch, that we opted to place a nicely scaled 8′ Trompete in its place. Music director Clif Cason envisions a second phase of the project to install a new full-length 16′ Posaune in the back of the organ, and a Pedal 16′ Offenbass in additional cases alongside the existing instrument. This may be tied into a long-hoped-for chancel renovation and re-configuration project.
The re-installation of the organ took approximately two weeks, and tonal finishing occupied three weeks. The result is a phenomenally clean, clear, transparent, buoyant, musical sound. The reeds are full and round, the direct result of Roland Killinger’s research from the 1960s. This organ, and our rebuilt organ at First Presbyterian Church, will be featured in the AGO regional convention to be held next summer in Lexington.
It is possible to work faithfully in a style that may not be one’s own when renovating an existing instrument. But this takes complete subrogation of one’s self from the tonal and mechanical equation. Our firm has the depth and experience to successfully undertake such a project, while at the same time developing our own personal style of modern organbuilding. Many know that I’m a romantic at heart. One of my colleagues said to my son at the recent AGO convention (to paraphrase) “It’s because of your father, that we can build modern romantic organs.”
The new organ at Hayes Barton United Methodist Church in Raleigh, North Carolina came about because the wonderful people on the organ committee had a romantic and emotional reaction to our organs at All Saints Episcopal Church in Atlanta, Georgia, and Williamsburg Presbyterian Church in Williamsburg, Virginia. They asked their consultant, Keith Shafer, why they needed to listen to any other builders’ instruments after hearing ours, because they knew in their hearts that they had fallen in love. But they followed the consultant’s discipline, and hearing others confirmed their impression of heart. They had to have a Buzard organ in their church!
Their organ project was coupled with a tremendously successful sanctuary renovation project, in which the visual and acoustical environments were transformed into a dignified, lively and holy place of worship. Organist David Witt spent endless hours coordinating architects, contractors, and consultants. The interior designer was Terry Byrd Eason and the acoustician was Dana Kirkegaard.
Engineering this instrument of 43 stops and 52 ranks was one of the greatest physical challenges for executive vice-president Charles Eames (also a Visser-Rowland alumnus). Every inch of roof gable, every nook and cranny of former organ chambers, and a space above a newly developed sacristy became home for the instrument, all of which can easily be reached for maintenance and tuning.
The warmth and breadth of the tonal palette encompasses a dynamic and lively Principal chorus as the backbone of the instrument, as well as flute, string, and reed choruses. No two stops of the same class are identical, which translates into tremendous tonal variety. The organ can accompany a single small child, through a choir of 100. And, the improved acoustics coupled with our voicing allows one to feel the sound all around oneself, and that one is always supported in singing.
During our last week of tonal finishing in early June, son Stephen came down to Raleigh from his last summer at Westminster Choir College in Princeton, New Jersey, and played an impromptu concert for the members of the church’s building and organ committees. Playing for about half an hour, the clarity of the Principal choruses was highlighted, then the softer, suave voices in the Swell and Choir as well as the lyrical reeds; then the organ’s orchestral nature shone in the Willan Introduction, Passacaglia, and Fugue. All agreed that they never thought pipe organs could sound this way.
Yes, I am a romantic at heart, a professional of mind, perhaps a pragmatist and dreamer all rolled into one. But so is everyone else on my staff, and we would love nothing more than to be a part of your worshipping community, whether it involves building you a new pipe organ, or renovating an instrument you have, with which you want to fall in love again.
—John-Paul Buzard

Maxwell Street Presbyterian Church, Lexington, Kentucky
1963 Rieger Orgelbau, Austria, mechanical action, 21 stops, 30 ranks
2010 renovations John-Paul Buzard Pipe Organ Builders, Champaign, Illinois. Completed October 15, 2010

HAUPTWERK Manual I 55mm wind pressure
8′ Principal 61 pipes
8′ Röhrflöte 61 pipes
4′ Octave 61 pipes
II Sesquialter 122 pipes
2′ Blockflöte 61 pipes
11⁄3′ Mixtur V 305 pipes
16′ Röhrschalmei 61 pipes*
8′ Trompete 61 pipes*
II–I 8′

POSITIV Manual II
55mm wind pressure
8′ Holzgedeckt 61 pipes
4′ Principal 61 pipes
4′ Koppelflöte 61 pipes
2′ Octave 61 pipes
11⁄3′ Quint 61 pipes
2⁄3′ Scharff IV 244 pipes
8′ Krummhorn 61 pipes*
Tremulant

PEDAL 55mm wind pressure
16′ Offenbass (* prepared for)
16′ Subbass 44 pipes
8′ Octavbass 32 pipes
8′ Subbass 32 notes
4′ Gemshorn 32 pipes
2′ Rauschpfeiffe III 96 pipes
16′ Posaune (* prepared for)
8′ Trompete 32 pipes*
4′ Schalmei 32 pipes*
Tremulant
I–P 8′
II–P 8′
(* denotes new pipes)

John-Paul Buzard Pipe Organ Builders, Champaign, Illinois
Hayes Barton United Methodist Church, Raleigh, North Carolina
Three manuals, 43 stops, 52 ranks, electric-slider action
Completed June 2010

GREAT (4-inch wind pressure)
16′ Lieblich Gedeckt 61 pipes
8′ Open Diapason 61 pipes
polished tin in façade
8′ Viola da Gamba 61 pipes
8′ Flûte Harmonique 61 pipes
polished tin in façade
8′ Bourdon 61 pipes
4′ Principal 61 pipes
4′ Spire Flute 61 pipes
22⁄3′ Twelfth 61 pipes
2’ Fifteenth 61 pipes
11⁄3′ Mixture IV 244 pipes
8′ Trompete 68 pipes
(doubled flue trebles)
8′ Tromba (Pedal)
4′ Tromba Clarion (Pedal)
8′ Major Tuba (Choir)
Tuba Solo (melody coupler)
Tremulant
Cymbalstern 14 bells
Chimes (digital)
Great-Great 16-UO-4
Swell-Great 16-8-4
Choir-Great 16-8-4

SWELL (4-inch wind pressure)
16′ Gedeckt Pommer 43 pipes
(1–18 from Great)
8′ Violin Diapason 61 pipes
8′ Stopped Diapason 61 pipes
8′ Salicional 61 pipes
8′ Voix Celeste 61 pipes
8′ Flûte Cœlestis 86 pipes
(Ludwigtone)
4′ Principal 61 pipes
4′ Harmonic Flute 61 pipes
22⁄3′ Nazard 61 pipes
2′ Recorder 61 pipes
13⁄5′ Tierce 61 pipes
2′ Full Mixture IV 244 pipes
16′ Bassoon 85 pipes
8′ Trompette 68 pipes
(doubled flue trebles)
8′ Oboe 61 pipes
4′ Clarion (ext Bassoon)
8′ Major Tuba (Choir)
Tremulant
Chimes (digital)
Swell-Swell 16-UO-4

CHOIR (4-inch wind pressure, except as noted)
8′ English Open Diapason 61 pipes
8′ Flûte à Bibéron 61 pipes
8′ Dulciana 61 pipes
8′ Unda Maris 49 pipes
4′ Principal 61 pipes
4′ Block Flute 61 pipes
2′ Doublette 61 pipes
11⁄3′ Larigot 61 pipes
1′ Fourniture IV 244 pipes
8′ Clarinet 61 pipes
8′ Tromba (Pedal)
4′ Tromba Clarion (Pedal)
8′ Major Tuba 61 pipes
25 inch wind pressure
Tremulant
Chimes (digital)
Harp (digital)
Celesta (digital)
Choir-Choir 16-UO-4
Swell-Choir 16-8-4

PEDAL (4-inch wind pressure, except as noted)
32′ Double Open Diapason (digital)
32′ Subbass (digital)
32′ Lieblich Gedeckt (digital)
16′ Open Diapason 32 pipes
wood and metal in facade;
1–6 12-inch wind
16′ Bourdon 44 pipes
8′ Open Bass 44 pipes
polished tin in façade
8′ Principal 44 pipes
polished tin in façade
8′ Bourdon (ext)
8′ Violoncello 32 pipes
polished tin in façade
4′ Choral Bass (ext)
4′ Open Flute (ext)
16′ Trombone 85 pipes
7-inch wind pressure
16′ Bassoon (Swell)
8′ Trumpet (ext)
4′ Clarion (ext)
8′ Major Tuba (Choir)
Chimes (digital)
Great-Pedal 8-4
Swell-Pedal 8-4
Choir-Pedal 8-4

Photo credit: John-Paul Buzard

800/397-3103
www.Buzardorgans.com

John-Paul Buzard Pipe Organ Builders, Champaign, Illinois, Opus 34

Mt. Pleasant Lutheran Church (ELCA), Racine, Wisconsin

From the designer and builder

Did you know that the Jetsons are parishioners of Mt. Pleasant Lutheran Church, Racine, Wisconsin? You know them: George, Jane (his wife), daughter Judy, and his boy, Elroy. Outside the world of futuristic fiction, they must have had an influence in the design of this church building, which is locally known as “The Space Ship Church.” Built in 1975, it is a dish with an inverted saucer as its roof; large plate glass windows surround its perimeter, filling in the space at which the two join.

This building’s unique shape determines how it is accessed and used—functionally and liturgically. Ahead of its time in terms of accessibility, upon entering at ground level, one enters the lower level fellowship areas and upper level worship area by a series of switch-back ramps that wind around the building’s diameter. Liturgically, this is a church in “three-quarter round,” which presents its own challenges for communion and processional traffic flow.

The building’s shape also determines its acoustical environment, and therefore the limits of a pipe organ’s physical and tonal design. Consultant Scott Riedel guided the church in improving the acoustics and creating a better area for music-making, by altering the shape of the walls facing the congregation, filling in gaps between ceiling beams, and replacing the carpeting in the choir’s seating area with hardwood flooring. And, in fact, sound is now heard more clearly and evenly through the room, especially in the outer ring of seating at the edge of the room’s diameter. But, the remaining carpet and pew coverings do their work too well, absorbing bass frequencies.

We were able to observe this phenomenon clearly before the church’s former organ was removed. The 16¢ pedal sounds were weak in the church, but in the lower level fellowship hall, the tone boomed to overtake normal conversation.

The organ chamber, while perfectly sited across the front of the worship area, is horizontal in nature, with a maximum ceiling height of 14'. Congregational seating comes to within four feet of the organ’s left side; the choral singers are about eight feet from the right side. The wide layout, and very present location of the organ, demanded that the design be practical, and required a very gentle touch in its scaling and voicing. Since the pipes could not be elevated above the congregation’s heads, the sound is produced directly at the level of people’s ears, requiring very refined voicing. The enclosed accompanimental divisions of the organ needed to be located to the right, nearer the choir, which meant that the Great needed to be on the left. People on the left side of the organ would be only four feet away from the Great Mixture. Oh, yes, there were also four steel roof support columns in the organ chamber, which could not be moved, and had to be worked around.

Those of you who have followed our work, or played our instruments, know that our organs have a smooth, warm, pervading, and significantly grand tone. They can be bright when they need to be, but the various stops are not inherently so. (The last thing we want to do is voice the high pitches in the mixtures to be bright!) Our organs are not crowned by high-pitched mixture-work (as in neo-classic organs), but by the heroic blend that results from mixtures and reeds singing together, reinforcing unison pitch. In the case of this church, we needed to fill the entire building (basement included) with bass frequencies, and gradually decrease the intensity of tone as the pitches rose, in order to have the organ sound smooth, balanced in the tonal spectrum, and consonant with our artistic style. To have achieved the balance it has—whether one is sitting next to the Great Mixture, or in the outside ring—is a testament to the organ’s solid construction, painstaking attention to scaling, and countless hours of listening and adjusting the sounds in the church. Our head voicer, Brian Davis, was promoted to the position of tonal director as a result of this organ’s success in the face of such overwhelming challenges.

The visual design’s “prime directives” were to bring order to random asymmetry, lead the eye toward the center of the worship area, emphasize what little verticality the space actually has, and give a dignified prominence to a steel sculpture in front of the organ—the base of the church’s three-bladed steeple, which pierces the roof and ascends to a needle point in the sky.

The three arms of the steeple are of unequal width, connected by horizontal welded rods, and form a sculpture in the nature of a cross. Original descriptions of the sculpture allude to the Trinitarian symbolism of its three blades. The organ chamber is located immediately behind the sculpture, the center portion curved in the outline of the stone font, the sides on a slightly reverse curve as the chamber returns to the side walls. Aside from the planned asymmetry of the steel sculpture, the exact dimensions and precise placement of the organ chamber behind the sculpture could not be ascertained until the old organ was removed and the chamber developed by moving offices and closets previously flanking the former instrument. The chamber space itself was asymmetrical as registered to the centrally located sculpture.

We decided to design the organ’s façade in three sections, not only to emphasize the Trinitarian symbolism, but to give us some practical constructional flexibility in reconciling the many dimensional variables. Even though everything was accurately constructed in the shop to careful measurements taken once the organ chamber was constructed, we still needed to do more woodworking on-site than we would have liked, or than other situations have ever required.

The center section, being behind the flat-black steel sculpture, needed some visual grounding, but not heaviness. The former organ was basically dark, with lots of black grille-cloth, which made the steel sculpture disappear. We therefore displayed the centrally located large wood pipes in a light, natural finish in the center section, with the horizontal bright polished copper reed resonators wrapping themselves around the sculpture from above and behind. This central display is symmetrical, and acts as a perfect backdrop to gently soften the tension created by the wide-versus-narrow blades of the sculpture in front. The low octave of the 8¢ Pedal Principal flanks this display of the wood pipes, the pipes being mounted on toeboards that follow the curve of the font, to act as a transition to the façade’s side elements.

In order to provide motion, rhythm, and verticality to this horizontal instrument, the left and right sides feature the largest of the polished tin Principal pipes, mounted on casework with a toeboard “sill” lower than that of the center section. The façade pipes’ feet are significantly lower than the windchests in the organ, so we had to hide the chests and reservoirs behind them with black felt to eliminate potential visual confusion. The pipes on the outside edges are supported by arched toeboards, rising above the façade’s sill (or impost if this were an organ case), which we enameled blue to relate to other colors in the room. The largest Pedal Principal pipes we could fit in the façade are from 16¢ FFF, which sit on the floor, to break the horizontal line of the sill and challenge the height of the central steel sculpture. As the compass of this stop ascends, the smaller pipes are racked up on the sill, but the mouth line forms one continuous rising arch, leading the eye inward. Subtle touches of pipe spacing from the edges of the upright casework members were added to subtly influence one’s viewing of the “symmetrically asymmetrical organ.”

The tonal design of this instrument is fairly typical of what we do, with the exception of the four-stop Solo Organ, which is at home on the bottom manual keyboard. The Great, Swell, and Pedal are full and well developed, consonant with our style. The Solo offers some evocative coloristic sounds and the flexibility of a third keyboard in a situation in which there was neither room nor money for a full Choir Organ. Usually our organs’ solo reeds are Tubas. But, in this close acoustic, we were extremely concerned that the high volume, located so close to the listeners, would drive them all out onto Green Bay Road and us out of town on a rail! We therefore opted to make these Trombas, on lower pressure with slightly more open shallots for a relatively dark tone, but at a solo volume in balance with the rest of the organ. The Great 8' Trumpet is truly a luxury. This Trumpet is a beautifully blending chorus reed and also very useful for solo work. The Swell reed battery, though, is what’s worth writing home about! Here’s the power in the organ, beautifully tailored for its uses in a wide variety of contexts, but it is never too loud in the room. The Swell 16' Bassoon, which plays in the Pedal as well, perfectly balances not only the Swell battery, but also the Great full chorus for those many times when it is used as a “pointed” pedal reed and the darker, heavier Trombone would be too much.

It has been a pleasure to work with the people of Mt. Pleasant Lutheran Church, and consultant Scott Riedel, on this new instrument. Pastor Stephen Samuelson, music director Joshua Brown, and the organ committee fell in love with our instruments after hearing the organ we built at St. David’s Episcopal Church, Glenview, Illinois. Their vision for how the new organ would transform their unique worship space was inspiring. It was our privilege to be given the challenges and create something truly beautiful.

—John-Paul Buzard



From the organist and director of music

Like any good Lutheran, I must start with a confession. Five years ago, when I pulled up to Mt. Pleasant Lutheran Church for my first interview, I thought “Who designed this thing, Frank Lloyd Wrong? It embodies disappointing American church architecture with its wide squat room, plenty of carpet and more wasted space than the inside of an SUV!”

Fortunately, like any good Lutheran, I put my trust in God’s abiding grace, and returned to Mt. Pleasant as their organist and director of music to discover the beauty of this building. A ribbon of windows keeps the outside world in plain sight, and the roof line surrounds the building with a crown of thorns. The triune tower rises up from the baptismal font, punctuating this architectural statement, which has served as the church’s very best evangelism tool since its completion 30 years ago!

The church’s former small organ had been assembled in an ad hoc manner through the years, and suffered from the oppressive acoustical environment and poor chamber layout. With the able guidance of Scott Riedel and Associates, the church crafted a plan to remodel the sanctuary, double its reverberation time, and replace the aging organ. The organ committee considered many fine builders. John-Paul Buzard’s warmth of tone, quality of workmanship, and, to quote the Senior Pastor Stephen Samuelson, “bang for the buck,” all contributed to the church’s final selection of his firm.

This unique American church required an equally unique American organbuilder. John-Paul Buzard and his team tackled the church’s twin challenges of odd architecture and unforgiving acoustics with great aplomb. In the process they demonstrated that the best organbuilders, particularly for American churches, need a flexible approach to fit a wide range of applications. From high gothic architecture with grand acoustics to restrained “prairie style” architecture with limited acoustics, John-Paul Buzard has adapted and delivered stunning results while maintaining his tonal style and uncompromising quality.

Opus 34, the result of three years’ careful planning and execution, has both matched and enhanced the sanctuary’s architectural style. More importantly, it has brought an entirely new dynamic to the worship life of the congregation. With a tonal scheme based on a wide array of 8¢ pitches, the organ fully supports the congregation’s singing and easily fills the room with sound. The two complete principal choruses allow the organ to lead congregations of varying sizes, from 10 to 600. The wide selection of reed and flute stops offers ample color and variety for responding to hymn texts and playing repertoire.
The organ was first played for worship on Reformation Sunday 2006, and Mary Preston will play the inaugural recital this month. I am grateful to all of the Buzard staff who worked at a strenuous pace to deliver and install our organ, and to Scott Riedel for his insight and guidance throughout the project. Finally, a special thanks to the staff, worship and music and organ committees, and members of Mt. Pleasant Lutheran Church who had the long-term vision required to undertake this project.

—Joshua Brown

Buzard Opus 34
33 stops, 40 ranks

GREAT (4" wind)

16' Lieblich Gedeckt

8' Open Diapason

8' Flûte à Bibéron (wide chimneys)

8' Viola da Gamba

4' Principal

4' Spire Flute

22⁄3' Nazard

2 Fifteenth

13⁄5' Tierce

11⁄3' Mixture IV

8' Trompete

Tremulant

Cymbalstern

8' Festival Trumpet (Solo)

Great to Great 16', UO, 4'

Swell to Great 16', 8', 4'

Solo to Great 16', 8', 4'

SWELL (4" wind)

8' Violin Diapason

8' Stopped Diapason

8' Salicional

8' Voix Celeste (gg)

4' Principal

4' Harmonic Flute

2' Recorder

2' Full Mixture IV

16' Bassoon

8' Trompette

8' Oboe

4' Clarion

Tremulant

8' Festival Trumpet (Solo)

Swell to Swell 16', UO, 4'

Solo to Swell 8'

SOLO (4" wind)

8' Harmonic Flute

8' Flute Cœlestis II (Ludwigtone)

4' Open Flute

8' Clarinet

8' Festival Trumpet (horizontal)

Tremulant

Chimes

Solo to Solo 16', UO, 4'

Swell to Solo 16', 8', 4'

PEDAL (4" wind)

32' Subbass (1–12 digital)

32' Lieblich Gedeckt (1–12 digital) (Gt)

16' Open Diapason (in façade from FFF)

16' Bourdon (stoppered wood)

16' Gedeckt (Gt)

8' Principal

8' Bass Flute (ext 16')

8' Spire Flute

4' Choral Bass (ext 8')

4' Open Flute (ext 16')

16' Trombone

16' Bassoon (Sw)

8' Trumpet (ext 16')

8' Festival Trumpet (Solo)

Great to Pedal 8', 4'

Swell to Pedal 8', 4'

Solo to Pedal 8', 4'

John-Paul Buzard Pipe Organ Builders, Champaign, Illinois

Opus 31: St. Bede Catholic Church, Williamsburg, Virginia

This new instrument was just installed this spring, the tonal finishing completed during April and June. This is the 31st new pipe organ built by John-Paul Buzard Pipe Organ Builders of Champaign, Illinois, and
the first of two new Buzard organs to be installed in Williamsburg churches. Williamsburg Presbyterian Church will receive Opus 32 next spring for their new Georgian style building at the entrance to Colonial Williamsburg.

The organ at St. Bede Catholic Church is the result of eight
years of planning and dreaming, hoping and praying. St. Bede’s
communicant strength is about 3,000 families, formerly located in a small
landlocked building close to Colonial Williamsburg. The former site simply could not accommodate the parish’s phenomenal growth, nor could the entire parish worship together. When planning the new building, St. Bede’s pastor, the Rev. Monsignor William Carr, insisted that the new
church include a pipe organ, and that the organbuilder be commissioned to work with the architect from the beginning. The new building, designed by architect Tom Kerns, seats 1,500 and is expandable to seat 2,000.

The then music director, and later consultant for the project, Steve Blackstock, formed a musical instruments committee to select the
organbuilder, as well as other musical instruments for purchase. The musical instruments committee directly communicated with the parish’s building committee (called the core committee) as the new building was planned, to make sure that the organ’s requirements were supported throughout the process.

Even though this church is not located in the Colonial District, there was great concern on the part of the core committee that the building relate to the area’s Georgian architecture--no small feat for a big round room--and that, since the organ case would be the significant visual element in the church, it must reflect appropriate features of Georgian design. A great emphasis was placed on the importance of art and
music as direct participants in liturgical expression, and the organ had to
appeal to all the senses in this surprisingly intimate--although rather
large--space. 

As the building’s design process unfolded, and the cost estimates exceeded projections, significant “value engineering” of the building was undertaken to allow the church to be built. The organ project was shelved and its estimated cost applied toward the building. It became apparent that an organ, whenever it would be installed, would need a small antiphonal division at the opposite end of the church to assist in congregational singing, due to a change in building materials.
Certain stops in the organ were prepared for future addition, to lower the
initial price. The music personnel changed, and the parish concentrated upon building the church. 

Once the building was up, Monsignor Carr’s passion for building the new pipe organ was rekindled. His love of fine art and artistic liturgical expression is infectious. It was through his inner fire that he established the notion in the minds of the parishioners that the church was simply not finished until the pipe organ was installed. Although at the time the church did not have an organist, our contract was signed the week following
the new building’s dedication. 

As the organ’s installation date approached, the parish hired organist Neil Kraft of Ohio to be their new director of music. He has already established himself in the Tidewater area as a musician of high
caliber, and the perfect person to develop an inclusive parochial music
program, with the organ as the principal musical instrument. A concert series to celebrate the dedication of this new instrument is being organized. The opening recital was played by Erik Wm. Suter on Sunday, September 30, and John Scott will play in June of 2006. The church is working on sponsorship of a concert featuring the Virginia Symphony, but this is currently in the planning stage. The new pastor, the Rev. John Abe, is committed to making St. Bede known for beautiful music, both in liturgical and concert contexts, for Williamsburg and the greater Tidewater area.

The organ case stands three stories tall and is made of 11/2-inch thick solid white oak and white oak veneers. Walnut is used for the pipe shades and accenting trim details. This is truly heroic cabinet making! The façades incorporate pipes of the Great 16’ Double Open
Diapason (the low 20 notes of which are shared in the pedal), the Great First and Second 8’ Open Diapasons, and the Pedal 8’ Principal. The
16’ Pedal First Open Diapason of wood stands behind the organ case and is stained and finished in a dark walnut color. Resonators of the low octaves of the Pedal 32’ and 16’ Trombones are made of beautiful, clear pine, continuing upscale in thick 52% tin pipe metal as this stop becomes the manual Tromba, voiced on 7” wind. The big Tuba stands vertically in the Choir box just behind the shutters, and is certainly the Tromba’s big brother, being voiced on nearly 30” pressure!

The Procession Organ’s case is also of white oak, to match the Main Organ case. Its pipe shades are carved basswood. Celtic crosses
have been cut into the tower tops and are enameled in rich, dark purple (the manufacturer’s color name “Monsignor” led to the whimsical
decision to incorporate it into the case in honor of Monsignor Carr), and
outlined in gold leaf. When played with the Main Organ, the Processional
Organ’s two Principal stops have the effect of “pulling” the sound out of the Main Organ’s case and surrounding the listeners with an
incredibly inescapable, voluptuous tone.

The console of 11/2-inch thick white oak is attached to an easily moved platform. And it’s a good thing, because the organ is heard in its best balance starting about 15 feet away from the case. We utilize
AGO radiating, concave pedalboards for their superior ergonomics. In a modern, eclectic pipe organ, the pedalboard’s shape should not limit an
organist’s ability to play in styles other than that which a flat pedalboard
dictates.

Those who have followed our work know that our instruments
are liturgical organs that play literature remarkably well. Our style is in
direct response to the need for an organ to function liturgically and
musically, but not at the expense of a particular historical, national, or
idiosyncratic musical style. Only a classic concept of organbuilding can truly accomplish this, and I think only an organist-trained organbuilder has the ability to empathize with modern American musical requirements, reconcile these to classic organbuilding practices, and know how to achieve the intended results. 

Slider windchests keep the tonal design physically honest,
and offer speech, voicing, and tuning advantages (as well as virtually no
long-term maintenance). Our proprietary Slider Pedal Chest allows us to play a single rank of pedal pipes at several pitches--without giving up slider chest speech, tuning stability, and repetition characteristics. Because they’re pedal stops, and usually only one note is played at a time, we can scale these individual ranks to be appropriate for two or three tonal contexts and save the client some money. 

Although we were one of the first American organbuilders to
reintroduce the Tuba into modern practice, in 1991 at the Chapel of St. John the Divine in Champaign, our tonal innovations are often of a subtler (and quieter) nature.  For example, in this organ we have specially developed Dolcan-shaped pipes for the metal top octaves of open wood ranks; they sound like wood pipes, but stay in tune. We have perfected Walter Holtkamp’s Ludwigtone as our Flute Cœlestis, its plaintive and gentle celesting tone evocative of something heavenly, which
explains the pun in the nomenclature. We have refined the 18th-century French Flûte à Bibéron (“Baby-Bottle Flute”) to be a colorful chimney flute tone suitable for solos, the foundation of a flute chorus, or secondary foundation for a principal chorus.

The sound of the organ is warm and rich, filling the space
nicely with a generous foundation. Each chorus has its own distinctive color, so there is no redundancy within each family of sound. The organist is able to lead congregational singing with a wide variety of color, at many different volume levels. And, recitalists won’t be disappointed in the tonal
resources and the informed manner of their disposition and execution. 

Everyone seems to have found “favorite” stops in this instrument. Of course the Pontifical Trumpets titillate the eye and ear, and most visitors want to hear them right off the bat. However, my 16-year-old son Stephen, already an organist of greater accomplishment than his father, fell in love with the Choir 8’ English Open Diapason while preparing a recital for the Tidewater POE held last June. “It has something to tell you,” he says. What higher compliment can an organbuilder receive? After all, shouldn’t pipe organs have a strong emotional appeal, so that when played they grab you and don’t let go? yes"> 

Henry Willis once said that truly great organs are only created when 90% of the project’s effort is expended upon the last 2% of perfection. After the organ is built, installed, and voiced, it’s that last step of careful, time-consuming, painstaking tonal finishing that imparts a living soul into the instrument. That you feel “connected” while listening or playing is no happy accident, but the result of careful listening and exacting craftsmanship on the part of the voicer working on the pipes. It is only when one is working at this level that organbuilding is truly an art.
And, it is only when clients have the sensitivity and sensibility to know the
difference that truly world-class pipe organs are commissioned.
style="mso-spacerun: yes"> 

It has been a tremendous honor to build this instrument, and
to work with Father Abe, Monsignor Carr, Steve Blackstock, Neil Kraft, and the wonderful people at St. Bede’s Church. We look forward to many years of wonderful music-making and musically inspired liturgies at St. Bede’s.

Deepest thanks to the staff of Buzard Pipe Organ Builders who have made this instrument so much more than the sum of its parts:

Charles Eames, executive vice-president, chief engineer,
general manager

Brian K. Davis, associate tonal director, head voicer, director, tonal department

Phillip S. Campbell, business manager

Keith Williams, director, service department

Shayne Tippett, shop manager

Stuart Martin, cabinet maker

C. Robert Leech, cabinet maker

Bob Ference, cabinet maker and service technician

Lyoshia Svinarski, wind system construction

Kenneth McCabe, wind system construction

Ray Wiggs, console, electrical systems, wind chest
construction

Evan Rench, pipe maker, voicer, racking, tonal associate

Stephen P. Downes, pipe preparation, racking, tonal
associate

Todd Wilson, service technician, installation

Stuart Weber, service technician

Jay K. Salmon, office manager

JoAnne Rench, receptionist

--John-Paul Buzard

43 straight speaking stops, 54 ranks, across three manuals
& pedal

GREAT ORGAN (4” wind)

16’ Double Open Diapason (tin in façade)

8’ First Open Diapason (tin in façade)

8’ Second Open Diapason (1–8 from 16’)

8’ Viola da Gamba (tin)

8’ Claribel Flute (open wood)

4’ Principal

4’ Spire Flute

22/3’ Twelfth

2’ Fifteenth

13/5’ Seventeenth

2’ Fourniture V

V Cornet (tenor C, preparation)

8’ Trumpet (preparation)

8’ Tromba (Ped)

4’ Clarion (from Tromba)

8’ Major Tuba (in case)

8’ Tuba Solo (melody coupler function)

8’ Pontifical Trumpets (polished copper, horizontal,
over entry door)

SWELL (4” wind)

8’ Violin Diapason

8’ Stopped Diapason (wood)

8’ Salicional

8’ Voix Celeste

4’ Principal

4’ Harmonic Flute

2’ Octavin

22/3’ Full Mixture V

16’ Bassoon (full length)

8’ Trompette

8’ Oboe

4’ Clarion

Tremulant

8’ Major Tuba (Ch)

8’ Pontifical Trumpets

CHOIR ORGAN (4” wind)

16’ Lieblich Gedeckt

8’ English Diapason

8’ Flûte à Bibéron

8’ Flute Cœlestis (doubled open wood)

4’ Principal

4’ Suabe Flute (open wood)

22/3’ Nazard

2’ Recorder

13/5’ Tierce

11/3’ Mixture IV

16’ English Horn (preparation)

8’ Clarinet

Tremulant

Cymbalstern

8’ Major Tuba (30” wind)

8’ Pontifical Trumpets (51/2” wind)

PROCESSIONAL ORGAN

(4” wind, housed in a case over the entry doors)

8’ Open Diapason (tin in façade)

4’ Principal

PEDAL (various pressures)

32’ Double Open Diapason (1–12 digital)

32’ Subbass (1–12 digital)

32’ Lieblich Gedeckt (1–12 digital)

16’ First Open Diapason (open wood)

16’ Second Open Diapason (Gt, tin-façade)

16’ Bourdon

16’ Lieblich Gedeckt (Ch)

8’ Principal (tin-façade)

8’ Bass Flute (ext 1st Open)

8’ Bourdon (ext 16’)

8’ Gedeckt Flute (Ch)

8’ Spire Flute (preparation)

4’ Choral Bass (ext 8’)

4’ Open Flute (ext yes">  8’ Bourdon)

32’ Contra Trombone (from 16’, wood)

16’ Trombone (wood)

16’ Bassoon (Sw)

8’ Trumpet (from 16’)

4’ Clarion (from 8’)

8’ Major Tuba (Gt)

8’ Pontifical Trumpets

The organ has a full set of inter- and intra-manual couplers. These have been omitted from this specification for brevity and ease of reading.

Cover

Buzard Pipe
Organ Builders, Champaign, Illinois

Opus 29,
completed November, 2003

All Saints
Episcopal Church, Atlanta, Georgia

Some years ago I was contacted about a new organ for All Saints Episcopal
Church by the assistant organist, Jefferson McConnaughey. We seemed to be
speaking the same language concerning how we thought organs should sound, and I
was eager to meet him, music directors Ray and Elizabeth Chenault, and to visit
the church. Our conversations were put on hold while the parish called a new
rector and undertook other projects. At the time we were blessed with
commissions to build the organ at St. Paul's Episcopal Cathedral, Oklahoma
City, and large instruments for Glenview Community Church (III/71) and Holy
Family Catholic Church of Rockford, Illinois (III/56).

A few years went by, and I was invited to visit the church. Judging from the
size of the instrument under discussion, I expected to enter a huge space.
Instead, the church was more modest than vast, the acoustic more understated
than generous. At first blush, it seemed that 40 stops could have adequately
met their needs. But, no real lady ever gives up all her secrets at once, and
so I patiently looked and listened.

I listened to their former instrument while walking around the room, and
observed the acoustical phenomena under which the musicians had been laboring
for so long. The organ, although installed in the chancel in relatively close
proximity to the congregation, diminished drastically in volume in the nave. I
concluded that a part of the organ had to be installed in the body of the
church, to support singing and "pull" the sound out of the main part
of the organ installed in the chancel. Additionally, sound generated in the
nave lost its energy quickly; sound simply didn't travel well without becoming
garbled.

The musicians wanted to be able to properly register an organ to
"text-paint" Anglican Chant, choral anthems and ceremonial music in
the Anglican musical tradition. They needed a wide variety of accompanimental
tone colors at every dynamic level so that the organ could always support the
singers, even at pianissimo volume levels. It was equally important that the
organ musically render the great body of organ literature, even that of the
French Baroque school, of which Mr. McConnaughey seemed quite fond. And, the
Chenaults are duo organists; the literature which has been (and has yet to be)
commissioned for them had to be accommodated. This requires a large organ, as
coloristic stops outside the component voices for the essential choruses had to
be included and integrated into the design. Fortunately, these stops were never
in competition for space or funding, nor were our classic concepts of the
hierarchical scaling of divisions within the instrument ever compromised. Some
specific organs were studied: The Temple Church, London; King's College,
Cambridge; and St. Paul's Cathedral, London.

There is a beautiful chapel behind the Epistle side choir stalls, at 90
degrees to the axis of the church, which also serves as an overflow room on
Sundays. Worshippers there were relegated to viewing services on a small
closed-circuit TV, and could not participate in the hymn-singing because, being
outside the body of the church, they couldn't hear the organ. If the new organ
were to address and meet all the musical and acoustical requirements of the
church, then the chapel also needed to have some pipes in it, so that those
seated there could feel a part of the worshiping community.

All of these requirements were brought to bear upon a single instrument. Yes,
I agreed, this instrument has to be large--very large. Even if the room seats
only 550 souls, the musical and physical requirements dictated an organ of a
size which one might initially think out of proportion.

The position and installation of the new Main Organ was relatively
straightforward. The Great, Swell, Choir, Tuba, and Pedal would have to be
installed in the chancel, in an enlarged version of their existing chamber,
plus spaces created by cantilevering steel platforms into the chancel space on
both Epistle and Gospel sides.

The antiphonal division, a romantic Solo Organ including a Diapason Chorus
which mirrors the Great, had to be installed in the nave. But there was no
floor space for cases, no desire to see columns, and windows everywhere, many
of them signed by Louis Comfort Tiffany. By clever engineering of the diatonic
windchest layouts (which we had first used at St. Paul's Cathedral in Oklahoma
City) we were able to tuck the Solo Organ cases up in the rafters of the church
above the narthex, on either side of a central great window. By creative use of
perspective, we were able to engineer the location of the supporting steel
platforms so that they wouldn't block the view of the Tiffany windows in the
side aisles, yet give us sufficient height for the pipes inside the cases.

As conversations concerning the tonal design took shape, Ray, Elizabeth, and
Jeff fell in love with our tonal style which, while embracing eclecticism, has
its own unique personality. They visited both our large organs, and Jeff
actually played Sunday services on our Opus 7 organ at The Chapel of St. John
the Divine in my wife Linda's stead. The All Saints organ is a very logical
outgrowth of our style as practiced in our smaller organs, and as our two
larger organs have led us. The humble beginnings of Opus 7 at the Chapel, in
which we made 29 stops into a cathedral organ, can be seen all over this much
larger organ. Well-informed national and historical inspirations are
distributed throughout, so that the whole is at unity with itself. No German
Hauptwerk, French Récit or English Chair Organs for us. For example the
Great includes the mature English practice of 8' First & Second Open
Diapasons, married nicely to the French Fonds d'Orgue. A voluptuous Full English
Swell has continental fire by virtue of the authentic (but modified) French
reed battery, but the lyrical soft solo reed is a plaintive English Oboe. No
quirky nomenclature either. Although rooted in 19th-century English practice of
"Diapason, Principal, Twelfth, Fifteenth," etc., the stops in our
organs are what they say they are. If the Swell reed is spelled
"Trompette," you can be assured that you will hear a Trumpet with
French shallots and pipe construction.

The Great is based upon a 16' Double Open Diapason of tin which stands
proudly in the Gospel side case along with the rest of the division. A complete
Diapason chorus through Mixture, flutes at 8' & 4', and a Viola da Gamba
make up the flue work, and the reeds are Trombas, brought up to the manuals from
the Pedal Trombone. The Mixture breaks at octaves, rather than at fifth
intervals. In this way, one doesn't hear alternating unison and fifths playing
as the top rank, and the breaks are virtually unheard.

The Great also incorporates an harmonic corroborating stop which was more at
home in English and American concert organs of the early part of the last
century. Our four-rank Harmonic Mixture has in it a unison, a quint, a tierce,
and a flat-seventh. These are all the harmonics present in Tromba class reeds,
which are on the Great at 8' and 4' pitches. We originally included the
Harmonic Mixture as a way to prevent the dark Trombas from covering the
brightness of the mixture work in full organ, but have found that when used
sans Trombas, the ancient flavor of 18th-century Dutch organs is perceived in
an uncanny way. One could even imagine the wind to be unsteady--but of course
it's not!

The Solo has a Diapason Chorus nearly mirroring the Great, and despite its
distance from the Main Organ, it can exactly balance the Great Plenum in
certain contexts. The Solo contains a pair of E. M. Skinner-inspired Gambas,
the celesting rank in the case across the church from its unison pair. Now
that's a Celeste! The Flügel Horn, while a lyrical romantic solo reed, has
just enough harmonic interest to function beautifully as a chorus reed. The
Bassett Horn is certainly at home playing obbligato parts in Elgar, but has
just enough Cromorne in it to play Daquin with a French nose in the air.

One can use the Choir in a classic context, as a Positiv when a lighter foil
to the Great is desired. But this division is the real choral accompanying
workhorse. It's one of the most elegant, light, but profound Choir divisions we
have created. The Choir features a flute chorus from 16' up, and a proper
Diapason chorus complete with a four-rank quint mixture, a fifth interval
higher than the Great. But the luxurious feature in this day and age is our
Dulciana Chorus, which includes a three-rank mixture in which the 4' enters
early on at tenor C. Our Dulcianas are truly small Diapasons, and there is
nothing like the effect of accompanying voices with Diapason color, but at such
a soft volume. The Dulciana Mixture has many uses in coloring and painting
texts, 90% of which I would never have envisioned. Our Cornopeans are
small-scaled, but fundamental Trumpets as the original prototypes were, not the
horn-like Cornopeans one would otherwise love to hate. The Clarinet is truly of
English style, and the English Horn is orchestral in color with enough body to
be the foundation of the Choir reed battery, yet enough jazz in the color to
differentiate itself from the more fundamental Swell English Oboe.

The Chapel Organ includes a small-scaled Diapason Chorus at 8' and 4' to
lead the hymn-singing, and an 8' Aeoline and Vox Angelica. These very, very
soft string-toned stops allow the worshippers there to feel connected, and also
provide a powerfully effective pianissimo "wrap-around" effect as the
softest sounds concluding a smooth decrescendo. These little strings can just
be barely heard in the nave as the expression box closes on the Solo Flute
Cœlestis. When they play alone, they are literally in another room, off in
the distance.

In the All Saints organ, the Great, Swell, Choir, Solo, and a portion of the
Pedal divisions play upon 4 inches of wind pressure. The Trombones and Trombas
play upon 7 inches of wind, the Solo Festival Trumpets on 6 inches, and the
Major Tuba plays upon 20 inches of wind. The Tuba is housed in its own
expression box, and the organist can easily select which expression shoe may be
used to operate the Tuba's expression (or whether it is to remain open) by a
simple rotary switch. We aim to expand the color and dynamic range of the pipe
organ, while keeping the console controls simple and straightforward.

Before I was selected as their builder, Ray, Elizabeth, and Jeff charged me
to design the perfect instrument for all their requirements, and they would
undertake the responsibility of presenting this plan to the organ committee to
get their reaction, and see if the instrument would have to suffer at the hands
of "value engineers." Although my past experience made me somewhat
timid about presenting such a large (expensive) instrument as part of a
selection competition, we arrived at the specification of 63 straight speaking
stops, 87 ranks of pipes (5229 pipes overall), in five free-standing cases
throughout their church.

I will never forget the evening of a crucial organ committee meeting when I
received an excited telephone call from Ray. The musicians presented the
proposal and the room fell silent. People on the committee asked questions to
the effect: "Now, do all three of you musicians agree on this builder? Do
all three of you agree with each other in every respect to this instrument?"
When the answer was an emphatic yes, a committee member said: "How many
times do musicians agree with each other about anything, let alone every of the
many thousands of details in this organ's design!? This is what we need for All
Saints, and we need John-Paul to build it for us." A member of the
committee, Sarah Kennedy, later wrote a check for the entire project, in loving
memory and in honor of her family, The Kenans.

The organs' visual designs were developed during August and September of
2001. The first draft of the Chapel Organ's design was revised to be more in
keeping with the modern nature of the chapel (and less like King's College,
Cambridge). The Main Organ and the Solo Organs were built according to my first
pen-and-ink renderings.

All of my design drawings are executed by hand. The discipline of cleaning
the drafting table and truing the parallel bars and 90-degree instruments
contributes to clearing my mind of everything except what I need to think about
for the organ on the blank piece of paper.

It is always my goal to design organ cases which appear as though they had
always been in the church. The All Saints cases use shapes and colors found
throughout the room, and mirror the restrained nature of the Victorian Gothic
design. But the cases become vivid, exciting, and dramatic by incorporation of
the fabulous red enamel and gold leaf adorning the church's clerestory. The
inclusion of the red gave me license to add contracting pieces of red-stained
Honduras mahogany in the stained white oak cases. The soaring nature of the
Solo Organs, as their lines ascend while moving toward the great window, seemed
to cry out for heraldic angels, announcing the Great Day of Judgment on
gold-leafed trumpets. Thanks to parishioner David Foerster for making these
possible.

All of us will remember exactly where we were on 9/11. I was at the drafting
table finishing the designs for the Main Organ cases. I had penciled the
drawing the day before and was preparing to ink the drawing when I heard the
news reports. My entire staff came up to the drafting room and we all went to
the conference area where a small television showed us the horrors unfold as
the second airliner smashed into the second building. As we heard a large
airplane overhead, being sent to land at our local airport, I was asked if we
were going to close for the day. I said, no. We had to go about our task of
making beautiful things, especially in light of the ugliness that visited
itself on our country that day. If we wanted to take time off individually to
mourn our country's losses, go with my blessing, but the doors would remain
open and I would continue to draw a beautiful pair of pipe organ cases.

I set to cleaning out my India ink pens, and put on a CD of The English
Anthem II from St. Paul's Cathedral,
London.

Oh Lord, look down from heaven, and behold the habitation
of Thy holiness and of Thy glory: Where is Thy zeal and Thy strength? Thy
mercies towards me, are they restrained?

My deepest thanks to the musicians at All Saints Church, everyone on the
organ committee, Greg Kellison, chairman; Paul Elliott, the rector; David
Foerster, and Sarah Kennedy for selecting me and my firm for this tremendous
commission.

My overwhelming gratitude goes to the members of my staff whose hard work
and dedication made such an excellent instrument so sublime: Charles Eames,
executive vice president, general manager and chief engineer; Brian K. Davis,
associate tonal director; Keith Williams, service department director; Shayne
Tippett, shop manager; Jay Salmon, office manager; Evan Rench, pipe maker,
voicer; Steve Downes, tonal assistant; C. Robert Leach, cabinetmaker; Stuart
Martin, cabinetmaker; Kenneth McCabe, winding systems; Ray Wiggs, consoles,
windchests; Robert Ference, service technician; Stuart Weber, service
technician; Jonathan Borchardt, service technician; JoAnne Hutchcraft Rench,
receptionist.

--John-Paul Buzard

GREAT (4-inch wind pressure)

Manual II - unenclosed pipework

16' Double Open Diapason

8' First Open Diapason

8' Second Open Diapason (ext 16')

8' Viola da Gamba

8' Harmonic Flute

8' Bourdon

4' Principal

4' Spire Flute

22/3' Twelfth

2' Fifteenth

2' Fourniture V

13/5' Harmonic Mixture IV

16' Double Trumpet

8' Trombas (ext Ped)

4' Clarion (ext Ped)

Tremulant

Chimes

8' Major Tuba (20" wind)

8' Tuba Solo (melody coupler)

8' Fanfare Trumpets (Solo)

SWELL (4-inch wind pressure)

Manual III - enclosed and expressive

8' Open Diapason

8' Stopped Diapason

8' Salicional

8' Voix Celeste

4' Principal

4' Harmonic Flute

22/3' Nazard

2' Flageolet

13/5' Tierce

22/3' Full Mixture V

16' Bassoon

8' Trompette

8' Oboe

8' Vox Humana

4' Clarion (ext 16')

Tremulant

8' Major Tuba (Gt)

8' Fanfare Trumpets (Solo)

CHOIR (4-inch wind pressure)

Manual I - enclosed and expressive

16' Lieblich Gedeckt (wood)

8' English Open Diapason

8' Flûte à Bibéron

8' Gedeckt Flute (ext 16')

8' Dulciana

8' Unda Maris

4' Principal

4' Koppel Flute

2' Recorder

2' Mixture III–IV (Dulcianas)

11/3' Fourniture IV

Sesquialtera II (22/3' & 13/5')

16' English Horn

8' Cornopean

8' Clarinet

Tremulant

Cymbalstern (14 bells)

8' Major Tuba (Gt)

8' Fanfare Trumpets (Solo)

Harp (digital)

Celesta (digital)

ANTIPHONAL SOLO (4- & 51/2-inch wind)

Manual IV - in twin cases over the narthex (expressive)

8' Open Diapason

8' Viola da Gamba

8' Gamba Celeste (CC)

8' Melodia

8' Flute Cœlestis II (Ludwigtone)

4' Principal

4' Flûte d'Amour

2' Doublette

11/3' Mixture IV

8' Flügel Horn

8' Corno di Bassetto

Tremulant

Cymbalstern (8 bells)

Chimes (Gt)

8' Fanfare Trumpets

8' Major Tuba (Gt)

Harp (digital)

Celesta (digital)

PEDAL (various wind pressures)

32' Double Open Diapason (digital)

32' Subbass (digital)

32' Lieblich Gedeckt (Ch, digital)

16' First Open Diapason

16' Second Open Diapason (Gt)

16' Bourdon

16' Lieblich Gedeckt (Ch)

8' Principal

8' Bass Flute (ext 16' Bourdon)

8' Gedeckt Flute (ext 16' Lieblich)

4' Choral Bass

4' Open Flute (ext 16' Bourdon)

22/3' Mixture IV

32' Contra Trombone (wood)

16' Trombone (wood, ext 32')

16' Double Trumpet (Gt)

16' Bassoon (Sw)

8' Trumpet (ext 16')

4' Clarion (Sw)

8' Major Tuba (Gt)

8' Fanfare Trumpets (Solo)

CHAPEL (4-inch wind, floating)

8' Open Diapason

8' Aeoline

8' Vox Angelica (tc)

4' Principal

Chapel on Great

Chapel on Swell

Chapel on Choir

Chapel on Solo

Chapel on Pedal

Intraddivisional couplers

Gt/Gt 16-UO-4

Sw/Sw 16-UO-4

Ch/Ch 16-UO-4

Solo/Solo 16-UO-4

Interdivisional couplers

Gt/Ped 8, 4

Sw/Ped 8, 4

Ch/Ped 8, 4

Solo/Ped 8, 4

Sw/Gt 16, 8, 4

Ch/Gt 16, 8, 4

Solo/Gt 16, 8, 4

Sw/Ch 16, 8, 4

Solo/Ch 16, 8, 4

Pedal Stops to Divisional Pistons

The Wicks Organ Company, Highland,
Illinois has built a new organ for the Barrington United Methodist Church,
Barrington, Illinois. In 1999 the church building was destroyed by fire. Their
losses included a 41-rank Möller pipe organ, which had been rebuilt as
recently as 1988. As planning for their new building began, the search for a
new pipe organ started. The church’s demands for their new organ were
that it had to be a great congregational organ, but also able to perform for
recitals as well. The sanctuary was to be a top-notch performance facility as
well as a place of worship. The church desired an organ of 3 manuals and 5
divisions, including an antiphonal. Each division was to have a principal
chorus, and the foundations of the Great organ were to be exposed.

The church committee heard many styles of instruments built by Wicks over
the last seven decades. This included, a North German neo-Baroque style
instrument, a symphonic organ scaled and designed by Henry V. Willis, an
American Classic, and an Aeolian instrument from the 1920s that had been
rebuilt by the Wicks Organ Company in conjunction with Mr. Madison Lindsey. The
service playing abilities of each instrument were demonstrated to the
committee, and they identified and found themselves drawn to the
English/symphonic style of the rebuilt Aeolian instrument. The organ committee
chose Wicks over several other builders after hearing several new Wicks
installations and the company ‘s recent success in exactly this style of
instrument.

The completed organ is described as an English service organ with orchestral
capabilities. The instrument is able to not only provide a seamless crescendo
from ppp to fff, but can do it with flair. In addition to service music, the
organ is able to perform every possible type of organ literature from the
Renaissance to the present. It is also able to realize orchestral
transcriptions with great skill, thanks to the presence of many orchestral solo
stops in each division, blending choruses, and 2-inch thick beveled and overlapping
felted shades. The completed organ consists of 24 ranks of pipes and 25 digital
voices. The Wicks design team pre-engineered space to accommodate real pipe
ranks to replace these voices. The Swell is on 7 inches of wind, the Pedal 10
inches; the Choir and Great are on 6 inches, with the exception of the
Clarinet, English Horn, and Tuba in the choir, which are all on 10 inches.

The solo reeds of this organ are of a unique style, derived from the
Willis/Wicks style reeds used in many Wicks organs over the decades, married to
the traditional ideas of Skinner solo reeds. The end results were clear,
smooth, stops of unique color and great versatility throughout the compass. The
greatest asset to the organ is the lively acoustical environment of the sanctuary.
The collaboration of the building committee, acousticians Kirkegaard &
Associates of Chicago, and the Wicks Organ Company have resulted in a
beautiful, successful combination of organ and room.

The console is drawknob style with 45-degree side jambs, a glass music rack,
and P&S keys with ivory resin naturals and ebony sharps. The drawknobs are
made of polished hardwood. Made of red oak, the interior is very light and the
exterior is stained to match the woodwork of the chancel furnishings. The console
features a tilt tab that allows the digital Tuba and Festival Trumpet to
emanate from the antiphonal division located in the rear of the church instead
of their native divisions. The console also has a Manual I/II transfer for
French literature.

Installation of Opus 6412 began in August of 2003, and an initial tonal
finishing and adjustment of digital voices took place in early September. After
the church’s dedication, Wicks tonal director Dr. William Hamner and reed
voicer Greg Caldwell completed an entire tonal finishing.

--Brent Johnson

Great (exposed)

16’ Violone*

8’ First Open Diapason

8’ Second Open Diapason

8’ Violoncello

8’ Harmonic Flute (Ch)

4’ Principal

4’ Flute Octaviante

2’ Fifteenth

IV Full Mixture

8’ Chorus Tuba (Ch)

8’ Festival Trumpet* (Ant)

8’ Tuba Mirabilis* (Ant)

Chimes* (Ant)

Swell (expressive)

16’ Minor Bourdon*

8’ Open Diapason

8’ Stopped Diapason*

8’ Viola*

8’ Viola Celeste*

8’ Flauto Dolce*

8’ Flute Celeste*

4’ Octave Diapason

4’ Triangular Flute*

22/3’ Nazard*

2’ Recorder*

13/5’ Tierce*

IV Plein Jeu

16’ Waldhorn*

8’ Cornopean

8’ Oboe*

4’ Clarion

8’ Festival Trumpet* (Ant)

8’ Tuba Mirabilis* (Ant)

Tremolo

Choir (expressive)

8’ Geigen (1-12*)

8’ Concert Flute

8’ Dolcan*

8’ Dolcan Celeste*

4’ Octave Geigen

4’ Transverse Flute

2’ Harmonic Piccolo

16’ Bass Clarinet

8’ Clarinet

8’ English Horn

8’ French Horn*

8’ Festival Trumpet* (Ant)

8’ Tuba Mirabilis* (Ant)

8’ Chorus Tuba

Tremolo

Harp*

Antiphonal (unenclosed - floating) (prepared)

8’ Festival Trumpet*

8’ Tuba Mirabilis*

Chimes*

Antiphonal Pedal (prepared)

Pedal

32’ Contre Bourdon*

16’ Open Wood

16’ Major Bourdon

16’ Violone* (Gt)

16’ Minor Bourdon* (Sw)

8’ Principal

8’ Flute

8’ Stopped Flute

4’ Octave

4’ Harmonic Flute (Gt)

32’ Ophicleide*

16’ Trombone (1–12*)

16’ Waldhorn (Sw)

8’ Tromba

8’ Trumpet (Sw)

4’ Oboe (Sw)

7-bell zimbelstern

*= Digital Voices

John-Paul Buzard Pipe Organ Builders, Champaign, Illinois, Opus 35
St. Peter’s Episcopal Church,
Chicago, Illinois

A new divided Choir Organ in twin cases on either side of the entry door, combined with the existing McManis organ of 1982

The artistic concept
Buzard organ Opus 35 is a new choir accompanying organ, housed in two mirror-image cases, located at the rear of the church, framing a large stained glass window and the entry doors. The impetus for installing a portion of the church’s pipe organ at the narthex was the expansion of the parish’s music program, in which the choral singers were moved to the rear of the church from their former location in the chancel. Horizontally mounted solo trumpets have been planned for future installation immediately under the stained glass window.
The organ cases complement and respect the church’s architecture and interior design. The tonal specification was designed to provide a succinct service-playing and accompanimental organ in our mature Anglican style, and complement the existing McManis organ in the chancel, creating an instrument that is both an integral part of the room and an active participant in the liturgy.
The Choir Organ is divided into two sections, one inside each of the cases. Both may be played together, to form a single Choir Organ, playable from the bottom manual keyboard. However, each section of the Choir Organ can be independently coupled to either the Great or Pedal keyboards, and the unison of either shut off, so that one can use the Choir Organ to accompany itself, as though it were a small two-manual organ (much as in the divided Swells in other of our organs).
A lightly voiced 16' Pedal Gedeckt is located in the Choir Organ’s right case, to provide this division with independent pedal sounds, and an independent 8' Open Diapason and 4' Principal are located in the front and façade of the left case, and played from the Great manual keyboard.
This achieves several goals. The new organ in the back fills the entire church when leading hymns, leaving the front organ for antiphonal effects or to add color and brightness to the registrations; the pipes in the back of the church can be played from two keyboards for musical flexibility; the unenclosed Great Diapason chorus in the back of the church allowed us to voice the enclosed Choir Organ’s chorus at a softer volume for accompaniment, so it would not have to serve the differing functions of choral accompanying versus supporting congregational singing.
Both instruments are controlled from a new three-manual and pedal English drawknob wing-style console. The console’s visual design is consistent with the organ cases and complements the church’s architecture and interior design. It is located near the new Choir Organ at the back of the church.

Scope of renovations to the
McManis organ
All the pipes above 8' pitch were brought to the shop for repair, cleaning, and regulation of their voicing. All the zinc basses were replaced with tin/lead metal pipes. The original McManis voicing was respected and restored wherever possible.
The two ranks of reed stops were also replaced with new pipes of stout lead and tin pipe metal for darker, fuller, and more consistent tone. We added a full-length Pedal 16' Trombone and a full-compass Swell 16' Bassoon, which was not originally installed. The new reeds are racked in multiple-level European reed traces of steel and felted wood for permanence.
The stop names of the McManis organ have been slightly altered in some instances to more accurately reflect the new tonal context; however, the scaling and overall tonal design of the McManis work was revered and respected. Prior to the re-installation of the McManis pipework, the existing McManis windchests were cleaned to minimize the recurrence of ciphers in the organ.
—John-Paul Buzard

39 stops, 50 ranks, incorporating 1982 McManis organ
John-Paul Buzard Pipe Organ Builders Opus 35 & 35R

GREAT ORGAN 3¼' wind
16' Gemshorn
8' Open Diapason (new, in Choir Organ
case, 4' wp)
8' Principal
8' Chimney Flute (new basses)
8' Gemshorn (ext 16')
8' Unda Maris (old Dulciana tuned
celeste)
4' Principal (new, in Choir Organ case, 4' wp)
4' Octave
4' Spire Flute
22'3' Nazard
2' Doublette
13'5' Tierce
11'3' Mixture III–IV
8' Trumpet (Sw)
Chimes (25 notes)

SWELL ORGAN 3½' wind
16' Lieblich Gedeckt
8' Open Flute (new basses)
8' Spitz Gamba (new basses)
8' Gamba Celeste (tc)
4' Principal (new)
4' Koppel Flute
2' Principal
1' Mixture III (new)
16' Bassoon (new)
8' Trompette (new)
8' Oboe (new, ext 16')
4' Clarion (new, ext 8')
Tremulant

CHOIR ORGAN “A” 4' wind
(New Opus 35)
8' English Open Diapason
8' Salicional
8' Voix Celeste (tc)
4' Principal
2' Full Mixture IV
16' English Horn
8' Cornopean
Tremulant

CHOIR ORGAN “B” 4' wind
(New Opus 35)
8' Stopped Diapason (wood)
8' Flute Cœlestis II (“Ludwigtone”)
4' Harmonic Flute
2' Recorder
11'3' Larigot
8' Clarinet
Tremulant

PEDAL ORGAN 3½' wind
32' Subbass (1–12 digital)
32' Lieblich Gedeckt (1–12 digital)
16' Open Diapason (wood, Kimball)
16' Bourdon (wood, Kimball)
16' Lieblich Gedeckt (Sw)
16' Gemshorn (Gt)
16' Choir Gedeckt (new, in Choir Organ
case)
8' Principal
8' Bourdon (ext 16')
8' Gedeckt Flute (Sw)
8' Gemshorn (Gt)
4' Choral Bass (ext 8')
4' Gedeckt Flute (Sw)
22'3' Mixture IV
16' Trombone (new)
16' Bassoon (new)
8' Trompette (Sw)
4' Clarion (Sw)