Church of the Gesu recitals

Wesley Roberts is Professor of Music at Campbellsville University, where he teaches piano, organ, and musicology, and has been a member of the faculty since 1982. He has presented concerts as pianist and organist throughout the United States, in Europe and in Asia, including premieres of works by the Dutch composers Hans Osieck, Johan van Kempen, and Kees Weggelaar, and the American composers Tom Johnson and James W. Moore. He is the author of articles and reviews in British, Dutch, and American journals, and co-author with Maurice Hinson of The Piano in Chamber Ensemble, 2nd Edition, published in 2006. Dr. Roberts has served as a visiting professor at the French Piano Institute in Paris and at Shanghai Normal University, and is currently organist at Calvin Presbyterian Church in Louisville.

A century-old slice of music history arrived on the campus of Campbellsville University in central Kentucky in early 2007, when a Farrand & Votey organ was moved from Nashville, Tennessee, to the George W. and Marie T. Ransdell Chapel. The organ was built in 1894 for Christ Church in downtown Nashville, as a modest instrument of approximately fifteen ranks.1 Over the course of many years, it has been rebuilt and enlarged to its present size of 51 ranks and 3,014 pipes. That Campbellsville University could acquire such a treasure was in itself a miracle, considering few universities nowadays are in a financial position to afford an organ of this size. But the miracle of a pipe organ is that it can be rebuilt and enlarged for much less expense than the purchase of a new instrument. Such would be the story of Farrand & Votey’s pioneering instrument from the 1890s.

The organ’s origins
At the time Christ Church contracted with Farrand & Votey for an organ in June 1894, the church was moving into a new sanctuary and desirous of a fine instrument for its new facility. William R. Farrand (1854–1930) and Edwin Scott Votey (1856–1931) worked for Whitney Organ Company in Detroit, and when Whitney retired in 1887 the two joined to establish their own company. The company was soon expanded through the acquisitions of two small organ building firms, Granville Wood (1890) and Roosevelt (1892). Always seeking new innovations, Farrand & Votey employed the most modern construction techniques of the time, using several recent developments patented by Roosevelt and a few of their own. Their technique paid off handsomely, for they quickly reached national attention with important installations in key locations across the United States. At the Columbian Exposition of 1893 in Chicago, they exhibited two organs, including a four-manual instrument in Festival Hall. Undoubtedly, these accomplishments attracted the attention of Christ Church, as it did others.2
Farrand & Votey’s new organ for Christ Church was a three-manual instrument of approximately fifteen ranks. It was played for the first time during the opening services for the new building on Sunday, December 16, 1894. The organist was accompanied by a quartette plus a “chorus choir” of three ladies and fourteen men. The organ used the newly developed electro-pneumatic action, a revolutionary technique for the time; called ventil, it had a separate wind supply for each stop, with individual valves for every pipe. Its keyboard was attached to the instrument, as in tracker actions, although the original plans had called for it to be set across the chancel in a detached console. The organ was considered the best that could be obtained for the time and was the only one of its kind in the southeastern United States. As might be imagined, the organ quickly became a source of pride for the church and city.
The new instrument drew its electrical power from a series of four large batteries for key action, and obtained wind pressure from a water pump. The batteries were expensive to maintain and proved to be unreliable. Little to no maintenance seems to have taken place during the first dozen years. During this period, there were no fewer than seven different organists. In 1906, Arthur Henkel was hired as organist/choirmaster, and entrusted to care for the instrument. A committee was formed and before the end of the year, Orla D. Allen, a builder who had been with Farrand & Votey, was contracted to restore the instrument. Allen installed a new electrical Holtzer Cabot rotary transformer, or motor-generator, for key action and a Ross hydraulic engine for wind pressure. He releathered the organ, rebuilt much of the internal workings of the console, and moved the latter across the chancel, as the original plans detailed. The work took six months and was said to be thorough and complete in church documents.
In the years to follow, the organ served as the principal musical vehicle for worship services and concerts. Henkel gave concerts on the new instrument to demonstrate its capabilities. One such concert program, dated December 5, 1909, included J. S. Bach’s Toccata and Fugue in D Minor and Boëllmann’s Suite Gothique, as well as lesser-known works by G. M. Dethier, Edwin Lemare, and Edward d’Evry.

Additions and repairs
A set of chimes with twenty tubes was presented for the organ by Jane Washington Ewing in memory of her husband Felix Grundy Ewing in 1936. They were dedicated and heard for the first time on October 28, 1936.3 Later, a Schulmerich carillon was given by Louise Bransford McGavock in memory of her parents, William Settle and Noda McGavock Bransford, in late 1944. With no place to install the gift, a front tower for the church was constructed in 1947, and the carillon was installed therein.4
By 1940, Henkel had noted to the church that the relays between the console and the organ had deteriorated to the point that repairs were needed.5 Pilcher Organ Company from Louisville, Kentucky, was engaged the same year to install a new console (with relays built inside) and seven new ranks. Company records show that by the time work was complete, Pilcher had added nine new ranks. These consisted of a Gemshorn 8′ on the Great; Vox Celeste 8′, Aeoline 8′, and Trompette 8′ on the Swell; Flute Celeste 8′ and Unda Maris 8′ on the Choir; and a Flute 8′, Octave 8′, and Super Octave 4′ in the Pedal. In addition, three ranks were revoiced: the Trumpet 8′ (Great), Oboe 8′, and Vox Humana 8′ (Swell); and the Clarinet 8′ (Choir) was given new bass. By the time work was finished in September 1940, the organ was said to have been enlarged to 2,438 pipes.6 Pilcher’s fee for these additions and service was $7,298.7
Further expansion of the organ began to be discussed after World War II, and a new console was installed by Möller Organ Company in 1955. This console, the third for the organ, is still in use today. Tonal improvements were made a few years later in 1959.
Henkel continued service at Christ Church until his retirement in 1959. He had served a total of fifty-three years as organist-choirmaster, and in honor of his ministry, the church dedicated the organ to Henkel upon his retirement. He was succeeded by Peter Fyfe, who served in the same capacity for the next thirty-five years, until 1994.8 During Fyfe’s years of service, many fine musicians from around the country came to Nashville and played the organ in either church services or concerts, including Leo Sowerby, John Scott, and Fred Swann, among others. An unusual event was the first performance of a Mass for Moog synthesizer and organ given in Christ Church by Nashvillian Dr. Gregory Woolf in the early 1970s.9
In 1967, Fyfe and Christ Church turned to A. W. Brandt and Company of Columbus, Ohio, for extensive work, releathering much of the instrument and repairing pneumatics and pipe boards. An extensive contract detailing the operation was signed in September for the sum of $16,535. The Choir organ was expanded in a second agreement with Brandt two months later, which called for the installation of six new stops in the Choir and one in the Great. Additions in the Choir included a new Rohrflute 8′ (replacing the Concert Flute 8′), Spitz Principal 4′ (replacing the Rohrflute 4′), Nazard 22⁄3′ (replacing the Flute Celeste 8′), Blockflute 2′ (replacing the Harmonic Piccolo 2′), Cymbal III (replacing the Geigen Principal 8′), and Krummhorn 8′ (replacing the Clarinet 8′). A new Gedeckt 8′ (replacing the Doppel Flute 8′) was placed in the Great. The total cost for these additions was $6,730.
The maintenance and care of the organ was entrusted to Dennis Milnar in 1968 and has remained with him and the Milnar Organ Company to the present day.10 A newcomer to Nashville from upstate New York, Milnar soon established his own company and developed a business that has serviced organs throughout Tennessee and in surrounding states. Under Milnar’s guidance, a new Tierce 13⁄5′ was added to the Choir in 1974. Additional work was done on the organ throughout the 1980s, including releathering the console pneumatics in 1981, converting the Double Open Diapason to a 32′ Sub Bourdon in 1984, releathering the wind chests in 1987–88, and installing a Scharf III, Trombone 32′, and other stops in 1989. The expression machines were releathered in 1991.

Liturgical renewal—changes at Christ Church
While many of these changes were being made to the organ, discussion within Christ Church began to develop following World War II on the placement of important items within the chancel. Those concerned with liturgical renewal suggested the baptismal font, pulpit, and altar of the church be brought forward from the back wall to the front of the chancel for closer contact with the congregation. Similarly, efforts to study the possibility of placing the organ in the balcony began during the 1960s after Peter Fyfe had been organist for several years, but there was never a coordinated effort to any of these ideas until after 1980, when Rev. Tom Ward became rector. Ward enthusiastically supported changes in the liturgy laid out in the 1979 Book of Common Prayer, and it was through his encouragement that church leaders studied and retained a liturgical consultant to suggest changes. A new design was approved in 1990, which called for the altar table, with adjoining pulpit and baptismal font, to be moved close to the front of the chancel, and for an extension of the balcony to relocate the organ and choir therein. The initial changes to the front of the chancel were completed in 1992 with the installation of a new altar. Shortly thereafter, discussion turned more decidedly toward moving the organ and choir to the balcony, and plans began to be developed to reinforce the balcony and enlarge it for this purpose. As these plans developed, various organ consultants agreed that the Farrand & Votey could not satisfactorily be reworked and reinstalled in the balcony. Consequently, the decision was made to purchase a new organ rather than move the existing instrument to the balcony. Renovation of the balcony for this purpose was completed in 2003, and an impressive 60-rank Lively-Fulcher organ was installed. The new organ was played for the first time on June 1, 2003, by church organist Michael Velting.11 With these changes complete, the church no longer needed its Farrand & Votey organ and placed it up for sale.

An organ for Ransdell Chapel
About the same time, the initial stages of designing the new Ransdell Chapel for Campbellsville University were beginning. Upon learning of the availability of the Farrand & Votey organ in October 2003, University Organist Nevalyn Moore and Wesley Roberts approached University President Michael Carter and received permission to investigate the possibility of acquiring the instrument for the new chapel. As they visited the church and played the organ, they realized that the organ would serve well as both a service organ to support the university’s chapel services, and a concert organ to support the academic program. Upon Moore’s and Roberts’ recommendation, with the assistance of Dennis Milnar, the organ was purchased for $30,000. The university then engaged Milnar Organ Company to convert the console and relays to solid-state technology, rebuild, redesign, move, and install the instrument in Ransdell Chapel.
The purchase of the organ at the early stages of design for Ransdell Chapel enabled architects to provide adequate space and facilities to house the instrument. Groundbreaking for the chapel was on October 25, 2005. Two additional stops were offered as gifts to the university for the organ. James and Nevalyn Moore, Campbellsville University School of Music faculty, gave a Zimbelstern, and Maynard and Jewel Faye Roberts of Ocala, Florida, gave a Trumpet en Chamade.
Excitement grew over the next year and a half as Ransdell Chapel was being built. As construction neared completion, Milnar began delivery of the organ in February 2007, in a series of six weekly trips from their shop in Eagleville, Tennessee. The initial delivery on February 20 brought many of the largest parts of the organ, including the huge wooden Sub Bourdon pipes and wind chests. Students and faculty joined the Milnar crew in unloading its precious cargo from week to week as pipes and equipment arrived.12 The Central Kentucky News Journal featured a front-page story on the organ in its April 5, 2007 issue.
The installation was completed in time for the dedication of Ransdell Chapel on April 18, 2007. University Organist Nevalyn Moore was at the console for the momentous occasion. Later in the summer, the Trumpet en Chamade arrived and was installed in the rear of the chapel for antiphonal effect. The chapel was also equipped with a Bechstein concert grand piano built in 2002, and a new Yamaha upright piano in an adjoining class/rehearsal room. Both instruments were gifts from friends of the university.
The organ was formally dedicated in a recital by Nevalyn Moore on September 4, 2007. On the program were selections by Albert Travis, Johann Sebastian Bach, Gordon Young, James Moore, Jean Langlais, and Charles-Marie Widor. The organ has since come to be admired in its new setting for its visual and musical beauty, and treasured for its capabilities and rich heritage.

Christ Church Cathedral
Specifications of the original Farrand & Votey organ13

GREAT
16′ Double Open Diapason*
8′ Open Diapason
8′ Viola de Gamba
8′ Doppel Floete
4′ Octave
22⁄3′ Octave Quint
2′ Super Octave
Mixture III*
4′ Trumpet

SWELL
16′ Bourdon
8′ Open Diapason
8′ Salicional
8′ Stopped Diapason
8′ Gemshorn
4′ Flute Harmonique
Cornet (?) ranks
8′ Oboe
8′ Vox Humana*
Tremolo
*To be added later

CHOIR
8′ Geigen Principal
8′ Dolce
8′ Concert Floete
4′ Rohr Floete
2′ Piccolo Harmonique
8′ Clarinet

PEDAL
16′ Open Diapason
16′ Bourdon
8′ Violoncello

Couplers
Great to Pedal
Swell to Pedal
Choir to Pedal
Swell to Great Sub Octaves
Swell to Great Unison
Swell to Great Super Octaves
Great Octaves
Choir to Great Sub Octaves
Choir to Great Unison
Swell to Choir
Swell Octaves

Ransdell Chapel
Farrand & Votey organ
Redesigned and rebuilt by Milnar
Organ Company, 2007

GREAT
16′ Quintaton
8′ Open Diapason
8′ Gedeckt
8′ Gemshorn
4′ Octave
4′ Koppel Flute
22⁄3′ Twelfth
2′ Fifteenth
V Fourniture
8′ Trumpet
III Scharf
8′ Trumpet en Chamade
Unison Off
Great 16
Great 4
Chimes
MIDI to Great

SWELL
8′ Open Diapason
8′ Stopped Diapason
8′ Salicional
8′ Aeoline
8′ Vox Celeste
4′ Flute Harmonic
4′ Gemshorn
2′ Principal
III Plein Jeu
II Sesquialtera
16′ Contra Fagotto
8′ Trompette
8′ Oboe
4′ Clarion
8′ Trumpet en Chamade (Gt)
Tremolo
Unison Off
Swell 16
Swell 4
MIDI to Swell

CHOIR
8′ Rohrflute
8′ Dolce
8′ Unda Maris
4′ Spitz Principal
22⁄3′ Nazard
2′ Blockflute
13⁄5′ Tierce
III Cymbel
8′ Krummhorn
8′ Trumpet en Chamade (Gt)
Tremolo
Unison Off
Choir 16
Choir 4
MIDI to Choir
Moore Zimbelstern

PEDAL
32′ Sub Bourdon
16′ Principal
16′ Quintaton
16′ Bourdon
8′ Octave
8′ Flute
8′ Cello
4′ Super Octave
32′ Trombone
16′ Trombone
8′ Trumpet
4′ Clarion
MIDI to Pedal

Couplers
Great to Pedal 8, 4
Swell to Pedal 8, 4
Choir to Pedal 8, 4
Swell to Great 16, 8, 4
Choir to Great 16, 8, 4
Swell to Choir 16, 8, 4
Great/Choir Transfer

Pistons
Generals: Thumb 1–6 & Toe 1–9
Swell: Thumb 1–6
Great: Thumb 1–6
Choir: Thumb 1–6
Pedal: Thumb 1–6 & Toe 1–6
Swell to Pedal: Thumb & Toe
Great to Pedal: Thumb & Toe
Choir to Pedal: Thumb & Toe
SFZ: Thumb & Toe
Combination Adj.: Thumb
Cancel: Thumb

Expression
Swell
Choir

Compass
61-note manual
32-note pedal

Memory System
Peterson ICS-4000

From the builder
When Christ Episcopal Church in Nashville, Tennessee, asked us to market their Farrand & Votey organ for them, we took the project to heart. The organ had been under our care for almost 40 years, and this project became personal.
I thought we had a possible new home for it in Nashville, but that did not materialize. Professor Wesley Roberts, of Campbellsville University in Kentucky, read an advertisement of ours and called us. After several discussions, Wesley, Nevalyn Moore, and I met at Christ Church. The organist of Christ Church, Dr. Michael Velting, gave a demonstration of the instrument, and they were impressed. I told them if we could redesign the organ to be on one level, instead of several, within a good room, in a good location, the organ sound would be enhanced.
We were so pleased when the university decided to purchase the organ and commission us to redesign, rebuild and install it in their forthcoming new chapel. That was the beginning of a long successful project. There were two major factors that made the project successful. First was the university’s willingness to make the necessary repairs and upgrades to the organ. The second was the architect, Jeff Bennett, who was enthusiastic about the organ and open to our recommendations.
The organ room at Christ Church was about 15 feet square with a height of about 25 feet. The tonal opening that faced the congregation was in front of the Choir box wall, and allowed limited egress of sound. The opening facing the Choir was larger, and allowed most of the sound egress. Both openings supported pipe façades with lovely hand-painted pipes. The limited floor space made it necessary to have the organ speak at several levels. Fortunately, it was an inside room, and the organ enjoyed good tuning stability.
The new home in Ransdell Chapel gave us an area that is 58 feet wide and 18 feet deep, with 26 feet of height. This area has complete temperature and humidity control. The outside walls of the organ area consist of eight-inch thick block, ridge insulation and a brick exterior. The ceiling has two layers of 5/8-inch drywall and the concrete slab floor is about 12 feet above and behind the stage. The sound projection is fantastic.
The architect provided us with new Swell and Choir chambers. These virtually soundproof enclosures have six-inch thick insulated walls, with two layers of 5/8-inch thick drywall on the inside with another layer outside. The doors are made of insulated steel, providing a most effective crescendo of sound.
Pipes that were once placed deep in the chamber were placed in an unobstructed position. The 32′ Bourdon spoke under the Choir and Great windchests and about 18 inches from a large bellows; it now has five feet of unobstructed space to develop its full sound and bounce off a solid wall. The listener can not only hear this powerful stop but also feel its reverberating tone. This is also true for the 32′ Trombone and the 16′ Principal, which were in the back of the old chamber behind the Swell box.
The organ now speaks with greater clarity and the volume has increased by at least 50 percent. To crown the organ, the parents of Professor Roberts donated funds to add a beautifully made
(A. R. Schopp’s Sons) Trumpet en Chamade. We mounted this on the rear wall at the height of the main organ. The large-scaled, flared copper reed has a warm strong sound that truly crowns the instrument without taking away from the grandeur of the main organ.
To hear and see this instrument today with its software-based organ control system (Peterson ICS-4000) and think back to its beginning with a water pump for air pressure and batteries to operate the magnets, speaks volumes about the reigning king of instruments.
—Dennis Milnar

Berghaus Pipe Organ Builders, Bellwood, Illinois
St. Jerome Catholic Parish, Oconomowoc, Wisconsin
Berghaus Pipe Organ Builders has built a new pipe organ for the people of St. Jerome Catholic Parish in Oconomowoc, Wisconsin. Opus 226 contains 53 ranks, 42 stops, and 3,019 pipes. The project was made possible by the generosity of the people of St. Jerome Catholic Parish, as well as other benefactors and contributors from the community.
Plans to relocate St. Jerome Parish began in the fall of 1997 as it became clear that the parish was expanding beyond the physical limitations of their historic downtown church. By August 1998, the parish had purchased 37 acres of land and begun planning for a parish-wide campaign. The school was constructed first, and was dedicated on September 11, 2004. A second parish-wide campaign began in January 2005, resulting in the dedication of the church on November 15, 2008. The new 1,000-seat nave nearly tripled the previous sanctuary’s capacity of 350, and provided the parish with a bright, modern worship space with a more favorable acoustical signature.
From the onset of the project, it was clear the existing 1918 Kimball organ would need to be incorporated into the new instrument to minimize new pipe costs. The two-manual, 15-rank organ, located in the center of the rear balcony, was entirely installed in a case against the rear wall. Despite additions in the early 1980s, the organ was of typical early twentieth-century liturgical design. The stoplist incorporated six stops at 8′ pitch, two stops at 4′, and a 16′ Bourdon in the Pedal. Added ranks included a 22⁄3′ Quinte, 2′ Octave, and Mixture IV in the Great. Original voicing and pressures were retained on the Kimball pipes at the time when the organ was augmented, which did little to bridge the gap between the old and new pipes. Thankfully, the new pipes were under-voiced, which would give Berghaus ample latitude in tonal finishing. Additionally, the bottom octave of the 4′ Flute d’Amour was abandoned, and the pipes were shifted down to create a 2′ Flute in the Swell.
In the new church, the organ was planned to occupy both ends of the nave. Great, Swell, and Pedal divisions would be entirely new, and located in the rear gallery. The Antiphonal division would be installed in one chamber, above and to the left side of the chancel. We chose not to divide the resources of the Kimball, but rather use them to create the new Antiphonal division. Furthermore, the Antiphonal chamber would be situated at the same height as the gallery organ to promote tuning stability.
Special consideration was taken in planning pipe scales for the gallery instrument, with the intent that the Antiphonal organ would not be a dark distraction to the new organ. Our present tonal philosophy reflects an eclectic approach, which is conducive to blending early twentieth-century voicing styles. We took our cues from the best elements of late nineteenth-century English organs, tempered somewhat by elements of romantic French and early romantic German organbuilding. All flue scales in the gallery are variable, changing throughout the compass for acoustic and practical reasons. The result is an instrument that, while separated by distance, successfully works as a whole tonal concept, which in turn is able to effectively provide the combinations necessary for liturgical music and beyond. Differing foundation and flute resources are available for cantorial accompaniment, projecting close to the lectern. The Antiphonal also contains the softest string sounds for tonal effects in anthems and voluntaries. When the full resources of the Antiphonal are coupled to the gallery organ, the Antiphonal “carries” the sound of the gallery organ forward down the nave, while at the same time seamlessly blending with the gallery without detracting from its timbre.

Great
The Great division consists of 15 stops, 16 ranks, and is divided between one large slider chest and one electro-pneumatic chest. The division is located directly above the Swell enclosure, and is based on the 8′ Principal, which is located primarily in the façade and constructed of 75% tin, with spotted metal in the treble. The 8′ Principal is scaled near Normalmensur plus two, which on 80mm wind pressure fills the nave with a warm yet gentle tone. It is voiced full in the bass, and has clarity in the treble to reinforce the melody line. The Principal chorus is complete through a four-rank mixture, and includes mutations that are meant to reinforce the plenum. Flues are primarily in spotted metal with the intent to add warmth to the overall tone, yet allow for brightness in finishing.
Additional 8′ stops (Flute Harmonique, Bourdon, Gemshorn, and Gemshorn Celeste t.c.) complete the standard fonds d’orgue, as well as add the unique flexibility of a third, unenclosed celeste. Tonal considerations were made to allow the scaling of this hybrid pair to be generous, yet with a low cut-up to provide clarity of tone. The 8′ Trumpet is designed with German shallots to provide a blending quality, which is meant to enhance the plenum. By contrast, the horizontal Trompette en Chamade, which is mounted on the front of the case, is scaled and voiced to blend with full organ registration, and can be used as a solo stop for processionals and fanfares. Both reeds are voiced on 100mm pressure.

Swell
The Swell division consists of 17 stops, 15 ranks, and is also divided between one large slider and one electro-pneumatic chest. The division is based on the 8′ Diapason of spotted metal, which provides foundation to a complete principal chorus through the Plein Jeu. The scale of the Swell Diapason is three steps smaller and completely different in tone than the Great Principal. The Swell contains a wide variety of stops, ranging from French-style strings to a liquid 8′ Rohrflöte, which is unified at 16′ and made of wood. Mutations are broadly scaled to provide for a rich Cornet decomposée. We elected to use English construction for the 8′ Trompette in the Swell in order to provide a contrast in tone to the Great Trumpet.

Antiphonal
Restoration of the Kimball pipework involved restoration of each pipe in one form or another. While minor repair and remedial voicing work was necessary, the general pipe-making was excellent. Few pipes had been physically altered in previous rebuild efforts, which allowed for maximum flexibility in finishing. We replaced the leather on the stoppers of all wood pipes, and in the spirit of the original Kimball, we provided twelve bass pipes to the Flute d’ Amour, and returned it to 4′ pitch. We also replaced the low twelve pipes of the Open Diapason, which replaced the badly damaged pipes of the original façade. All spotted metal pipes were dunked in a restorative solution, and fitted with new stainless steel sleeves. Finally, an 8′ Vox Humana was provided by Dr. Lee Erickson, friend to the project.
The 8′ Open Diapason of this division provides the organist with yet another Diapason tone. Made from a high-lead alloy, these pipes provide the tone one would expect from a Diapason of this vintage. The pipes are cut dead-length and scrolled. Undoubtedly they would have been originally over-length and slotted. Deep nicks in the languid and lower lip allow for open-toe voicing, which allows this stop to truly enhance the gallery instrument.

Pedal
Consisting of 19 stops, 8 ranks, the Pedal provides a solid foundation to this full instrument. Through calculated borrowing and tonal finishing, this division provides an ample variety of timbres and volumes. The 16′ Principal in the Pedal division (façade) is made from a combination of zinc and 70% tin pipes, and is finished with a silver-tone patina. The Pedal is further supported by an impressive unit 32′ Kontra Posaune, which is voiced full in order to provide an equal blend of harmonics and fundamental. We used tin-faced German shallots throughout the compass of this reed, which provides unique overtones required to enhance the pedal plenum, particularly when considering this stop will be used in part in cantus firmus.

Chests and wind system
Flue pipes of the Great, Swell and Antiphonal sit on Berghaus slider and pallet chests. Reeds and offset chests are electro-pneumatic action. The entire organ is supported by an interior steel structure, which provides stability while allowing unimpeded access to interior parts of the mechanism. Wind to the pipes is supplied by two blowers—one blower for the gallery organ, and one for the Antiphonal. Our wind system provides absolutely steady wind through a balance of schwimmers and reservoirs. Wooden wind conductors help eradicate turbulence and are effective in eliminating noise. Slider chest wind pressures are 80 and 75mm, while reeds and Pedal are on 100mm.
The gallery organ case and organ console are constructed of maple, and are designed to incorporate architectural elements found throughout the worship space. Keyboards are in bone and rosewood, with African Kewazinga Bubinga stop jambs and coupler rail.
The construction of the organ at St. Jerome Parish was achieved through the dedication and teamwork of the entire Berghaus organization, which extends its sincerest gratitude to the people of St. Jerome Parish for enabling us to contribute to the life of their parish:

President: Brian Berghaus
Director of sales and marketing: David McCleary
Tonal design: Jonathan Oblander, tonal designer; Kelly Monette, head tonal finisher
Reed specialist: Steven Hoover
Structural and visual design: Steven Protzman
Shop foreman: Jeff Hubbard
Office manager: Jean O’Brien
Service coordinator: Joseph Poland
Construction/assembly/installation: Stan Bujak, Chris Czopek, Steve Drexler, Jeff Hubbard, Trevor Kahlbaugh, Kurt Linstead, Kelly Monette, David Mueller, Jonathan Oblander, Joseph Poland, Daniel Roberts, Tim Roney, Paul Serresseque, Ron Skibbe, Jordan Smoots, Paul Szymkowski, Mark Ber, Randy Watkins.

In addition, Berghaus Pipe Organ Builders gratefully acknowledges the invaluable assistance of Scott R. Riedel & Associates, Ltd. in the project, as well as the expertise and leadership of Fr. John Yockey, pastor, and Tom Koester, past organist of St. Jerome Parish.
­—Kelly Monette & Jonathan Oblander
Berghaus Pipe Organ Builders

Marceau & Associates Pipe Organ Builders, Inc., Seattle, Washington
Our Saviour’s Lutheran Church, Stanwood, Washington
Opus 27, 2009
Marceau & Associates Pipe Organ Builders has completed their Opus 27 project at Our Saviour’s Lutheran Church in Stanwood, Washington. The original instrument was built by Balcom & Vaughan Organ Builders of Seattle as their Opus 735, completed in 1968 for the First Presbyterian Church of Bellevue, Washington. This organ served as the primary musical resource for the Bellevue congregation until 1995, when a new sanctuary was built that included a new Casavant Frères pipe organ. At that time, the original sanctuary became the chapel, providing services on a smaller scale. In 2008, the chapel and adjoining buildings were slated for demolition to expand the current church campus. This news was brought to the attention of the organ committee of Our Saviour’s Lutheran, who decided to purchase this organ instead of rebuilding and enlarging their existing Kimball/Balcom & Vaughan instrument.
In May 2008, with the help of volunteers from Our Saviour’s, the organ was removed and transported to the Marceau organ shop in Seattle. From June to September, the organ was repaired, modified and redesigned to fit into the two organ chambers in Stanwood. The winding system was reduced to eliminate redundant reservoirs, a new electrical system by the Syndyne Corporation of Vancouver, Washington was installed, and all pipes were cleaned and revoiced for a more musical result. During the fall, the organ was installed and finished. It was used for the first time on Thanksgiving.
Since the original organ had no visible pipework, a new façade was designed with members of the church fabricating all of the casework. New polished zinc pipes from A. R. Schopp’s Sons of Canton, Ohio were installed in January 2009. The organ contains 21 stops, 26 ranks and 1,572 pipes, with preparations for a Great 8′ Erzähler Celeste and Swell 13⁄5′ Tierce. While the Great principal chorus is unenclosed, the Great flutes and string stops are enclosed, allowing for a greater degree of expression from both manuals.
The Great 22⁄3′ Quinte was not an original stop; this was created from the Pedal Mixture, which was not retained in the new stoplist. The principal chorus on the Great was revoiced to have a more prominent fundamental emphasis, which included reducing the dynamic output of the Mixture so that this stop now sits atop the ensemble without overpowering the listener with the original hard, glassy sound. The Swell 8′ Trompette was also programmed to play from the Great, replacing the duplexing of the Swell 8′ Hautbois from the original stoplist. The 16′ Posaune is now extended from the 8′ Trompette instead of the original 8′ Hautbois. The result is a smoother segue to this low octave of pipes.
A special thanks goes out to Jon Stoneman of Our Saviour’s Lutheran Church. His activities included the original planning of the organ project, removal and installation, providing volunteer help, technical advising throughout the project and providing home stays during the installation.
Members of the Marceau staff involved with the project included Sean Haley, René Marceau, Ruth Register, and Tom Skyler. Organbuilder Frans Bosman provided much needed technical assistance and support.
—René Marceau
5113 Russell Ave., NW
Seattle, WA 98107
206/521-0954
cell 503/522-2153
<[email protected]>

Our Saviour’s Lutheran Church,
Stanwood, Washington
Marceau & Associates Opus 27, 2009
GREAT
16′ Rohrbass (Sw)
8′ Principal (part façade)
8′ Gedeckt
8′ Erzähler
8′ Erzähler Celeste, TC
4′ Octave
4′ Spillflute
22⁄3′ Quinte
2′ Super Octave
11⁄3′ Mixture IV
8′ Trompette (Sw)
Chimes
Great to Great 16′
Swell to Great 16′
Swell to Great 8′
Swell to Great 4′
MIDI on Great
Zimbelstern

SWELL
8′ Rohrflute
8′ Viola
8′ Viola Celeste, TC
8′ Erzähler (Gt)
8′ Erzähler Celeste, TC (Gt)
4′ Principal
4′ Flute Douce
22⁄3′ Nasard
2′ Blockflute
13⁄5′ Tierce
1′ Plein Jeu III
16′ Posaune (ext)
8′ Trompette
8′ Hautbois
4′ Clarion (ext)
Tremulant
Swell to Swell 16′
Swell Unison Off
Swell to Swell 4′
MIDI on Swell

PEDAL
16′ Subbass
16′ Rohrbass (Sw)
8′ Principal (part façade)
8′ Rohrflute (Sw)
4′ Choralbass
4′ Rohrflute (Sw)
16′ Posaune (Sw)
8′ Trompette (Sw)
4′ Clarion (Sw)
Great to Pedal 8′
Swell to Pedal 8′
Swell to Pedal 4′
MIDI on Pedal

R. T. Swanson, Inc.,
Grand Ledge, Michigan
St. John’s Lutheran Church,
Saginaw, Michigan
The history of the pipe organ at St. John’s actually starts with an organ built by the Tellers-Kent Organ Company of Erie, Pennsylvania for St. Lorenz Lutheran Church of Frankenmuth, Michigan in 1930. When St. Lorenz bought a new Casavant pipe organ in 1967, their old instrument became available. William Kaltrider of Owosso, Michigan was engaged by St. John’s to build an organ by reusing much of the St. Lorenz instrument and providing a new console, electrical system and two new blowers. By 2000, many of the 1967 components were becoming increasingly unreliable. Another problem with the 1967 installation was that the organ pipes were installed in two cramped chambers on both sides of the balcony and they spoke through very small tone openings, resulting in a “muffled” tone quality.
In December 2001, St. John’s signed a contract with our company to build an essentially new pipe organ while salvaging as much of the previous instrument as was practical for reuse. Eighteen new windchests were built, allowing the most efficient layout for better tonal egress as well as better accessibility for tuning and maintenance. The action is electro-mechanical. The Swiss-made Meidinger blowers were connected to a new wind system that includes new reservoirs and schwimmers to regulate the wind supply.
Most of the pipes of the Great and Choir–Positive divisions are on windchests cantilevered out from the balcony rail by way of steel framework. The windchests and frames are clad in contemporary oak cabinetry stained to match the other oak in the sanctuary. Three ranks of the Choir–Positive are expressive and located in their own enclosure. Of the organ’s 25 ranks of pipes, 8 are new, 10 are from the St. Lorenz organ, and 7 are used ranks from other sources. All of the old flue ranks were reconditioned and revoiced in our shop. The Trumpet and Oboe ranks were reconditioned and revoiced by Trivo Company of Hagerstown, Maryland. The 8′ Cromorne was built and voiced by Eastern Organ Pipes of Hagerstown, Maryland. All new flue pipes were built by CMC Organ Pipes of Erie, Pennsylvania and voiced in our shop.
The console cabinet from 1967 was retained and refitted with new manual keyboards, stop tablets and the new ICS 4000 control system by Peterson Electro-Musical Products of Alsip, Illinois. The ICS 4000 system features a 99-level combination action and complete MIDI capabilities including record/playback.
Tonal egress from the existing organ chambers was improved by enlarging the tone openings and by installing all new expression shades. Preparations have been made for the future addition of a horizontal brass Trompette en Chamade, which will jut out from the center of the balcony railing.
A dedicatory organ concert on February 25, 2007 featured Professor Leonard Proeber from Michigan Lutheran Seminary in Saginaw.
—Richard Swanson

GREAT
8′ Principal +
8′ Doppelflöte *
8′ Gemshorn
4′ Octave +
4′ Doppelflöte (ext) *
22⁄3′ Twelfth TC +
2′ Fifteenth (ext Octave) +
11⁄3′ Mixture III +
8′ Trumpet (Sw)
Chimes
Great to Great 16′, UO, 4′
Swell to Great 16′, 8′, 4′
Choir to Great 16′, 8′, 4′
MIDI on Great

SWELL
16′ Bourdon
8′ Geigenprincipal
8′ Bourdon (ext) *
8′ Viole de Gambe *
8′ Voix Celeste *
4′ Geigenoctave (ext)
4′ Flûte Harmonique
2′ Piccolo (ext)
2′ Mixture III +
8′ Trumpet *
8′ Oboe *
4′ Clarion (ext)*
Tremulant
Swell to Swell 16′, UO, 4′
MIDI on Swell

CHOIR–POSITIVE
8′ Holzgedeckt
8′ Flauto Dolce (expressive)
8′ Flauto Dolce Celeste (expressive)
4′ Principal +
4′ Rohrflöte *
22⁄3′ Nazard TC *
2′ Octave (ext Principal) +
2′ Rohrpfeife (ext)*
13⁄5′ Tierce TC *
11⁄3′ Quinteflöte (ext 22⁄3′) *
8′ Cromorne (expressive) +
8′ Trompette en Chamade †
Tremulant
Chimes
Choir to Choir 16′, UO, 4′
Swell to Choir 16′, 8′, 4′
MIDI on Choir

PEDAL
32′ Resultant *
16′ Subbass *
16′ Bourdon (Sw)*
8′ Octave
8′ Bourdon (Sw)*
8′ Gemshorn (Gt)
4′ Fifteenth (ext Octave)
4′ Rohrflöte (Ch)*
2′ Twentysecond (ext Octave)
16′ Trombone (ext 8′)*
8′ Trumpet (Sw)*
4′ Clarion (Sw)*
Great to Pedal 8′, 4′
Swell to Pedal 8′, 4′
Choir to Pedal 8′, 4′
MIDI on Pedal

* = pipework from the 1930 Tellers-Kent organ originally at St. Lorenz, Frankenmuth
+ = new pipework
† = preparation for future addition